RESUMO
Accurate and continuous bladder volume monitoring is crucial for managing urinary dysfunctions. Wearable ultrasound (US) devices offer a solution by enabling noninvasive and real-time monitoring. Previous studies have limitations in power consumption and computation cost or quantitative volume estimation capability. To alleviate this, we present a novel pipeline that effectively integrates conventional feature extraction and deep learning (DL) to achieve continuous quantitative bladder volume monitoring efficiently. Particularly, in the proposed pipeline, bladder shape is coarsely estimated by a simple bladder wall detection algorithm in wearable devices, and the bladder wall coordinates are wirelessly transferred to an external server. Subsequently, a roughly estimated bladder shape from the wall coordinates is refined in an external server with a diffusion-based model. With this approach, power consumption and computation costs on wearable devices remained low, while fully harnessing the potential of DL for accurate shape estimation. To evaluate the proposed pipeline, we collected a dataset of bladder US images and RF signals from 250 patients. By simulating data acquisition from wearable devices using the dataset, we replicated real-world scenarios and validated the proposed method within these scenarios. Experimental results exhibit superior improvements, including +9.32% of IoU value in 2-D segmentation and -22.06 of RMSE in bladder volume regression compared to state-of-the-art (SOTA) performance from alternative methods, emphasizing the potential of this approach in continuous bladder volume monitoring in clinical settings. Therefore, this study effectively bridges the gap between accurate bladder volume estimation and the practical deployment of wearable US devices, promising improved patient care and quality of life.
Assuntos
Aprendizado Profundo , Ultrassonografia , Bexiga Urinária , Dispositivos Eletrônicos Vestíveis , Humanos , Bexiga Urinária/diagnóstico por imagem , Ultrassonografia/métodos , Ultrassonografia/instrumentação , Algoritmos , Feminino , Masculino , Adulto , Pessoa de Meia-Idade , Tamanho do ÓrgãoRESUMO
To enhance the effectiveness and safety of focused ultrasound (FUS) therapy, ultrasound image-based guidance and treatment monitoring are crucial. However, the use of FUS transducers for both therapy and imaging is impractical due to their low spatial resolution, signal-to-noise ratio (SNR), and contrast-to-noise ratio (CNR). To address this issue, we propose a new method that significantly improve the quality of images obtained by a FUS transducer. The proposed method employs coded excitation to enhance SNR and Wiener deconvolution to solve the problem of low axial resolution resulting from the narrow spectral bandwidth of FUS transducers. Specifically, the method eliminates the impulse response of a FUS transducer from received ultrasound signals using Wiener deconvolution, and pulse compression is performed using a mismatched filter. Simulation and commercial phantom experiments confirmed that the proposed method significantly improves the quality of images acquired by the FUS transducer. The -6 dB axial resolution was improved 1.27 mm to 0.37 mm that was similar to the resolution achieved by the imaging transducer, i.e., 0.33 mm. SNR and CNR also increased from 16.5 dB and 0.69 to 29.1 dB and 3.03, respectively, that were also similar to those by the imaging transducer (27.8 dB and 3.16). Based on the results, we believe that the proposed method has great potential to enhance the clinical utility of FUS transducers in ultrasound image-guided therapy.
Assuntos
Compressão de Dados , Compressão de Dados/métodos , Ultrassonografia/métodos , Razão Sinal-Ruído , Simulação por Computador , Imagens de Fantasmas , TransdutoresRESUMO
OBJECTIVE: Two-dimensional (2D) photoacoustic (PA) imaging based on array transducers provide high spatial resolution in the lateral direction by adopting receive dynamic focusing. However, the quality of PA image is often deteriorated by poor elevational resolution which is achieved by an acoustic lens. To overcome this limitation, we present a three-dimensional (3D) image reconstruction method using a commercial one-dimensional (1D) array transducer. METHODS: In the method, the elevational resolution is improved by applying synthetic aperture focusing (SAF) technique along the elevational direction. For this, a commercially available 1D array transducer with an acoustic lens is modeled and appropriate synthetic focusing delay that can minimize the effect of the acoustic lens is derived by mathematical analysis. RESULTS: From the simulation and experiment results, it was demonstrated that the proposed method can enhance the image quality of PA imaging, i.e., elevational resolution and signal-to-noise ratio (SNR). CONCLUSION: 3D PA images with improved elevational resolution were achieved using a clinical 1D array transducer. SIGNIFICANCE: The presented method may be useful for clinical application such as detecting microcalcification, imaging of tumor vasculature and guidance of biopsy in real time.
Assuntos
Técnicas Fotoacústicas , Processamento de Imagem Assistida por Computador , Imageamento Tridimensional , Imagens de Fantasmas , Técnicas Fotoacústicas/métodos , Razão Sinal-Ruído , TransdutoresRESUMO
Photoacoustic (PA) imaging is used widely in cancer diagnosis. However, the availability of PA agents has not made great progress due to the limitations of the one currently in use, porphyrin. Porphyrin-Micelle (PM), developed by synthesizing porphyrin and PEG-3.5k, confirmed the amplification of the PA agent signal, and added binding affinity in an LNCaP model by attaching prostate-specific membrane antigen PSMA. Compared to the previously used porphyrin, a superior signal was confirmed, and the potential of PMP was confirmed when it showed a signal superior to that of hemoglobin at the same concentration. In addition, in the in vivo mouse experiment, it was confirmed that the signal in the LNCaP xenograft model was stronger than that in the PC-3 xenograft model, and the PMP signal was about three times higher than that of PM and porphyrin.
RESUMO
Intravascular ultrasound (IVUS) is a valuable imaging modality for the diagnosis of atherosclerosis. It provides useful clinical information, such as lumen size, vessel wall thickness, and plaque composition, by providing a cross-sectional vascular image. For several decades, IVUS has made remarkable progress in improving the accuracy of diagnosing cardiovascular disease that remains the leading cause of death globally. As the quality of IVUS images mainly depends on the performance of the IVUS transducer, various IVUS transducers have been developed. Therefore, in this review, recently developed mechanically rotating IVUS transducers, especially ones exploiting piezoelectric ceramics or single crystals, are discussed. In addition, this review addresses the history and technical challenges in the development of IVUS transducers and the prospects of next-generation IVUS transducers.
Assuntos
Transdutores , Ultrassonografia de Intervenção , Estudos Transversais , Desenho de Equipamento , UltrassonografiaRESUMO
A combined transrectal ultrasound and photoacoustic (TRUS-PA) imaging probe was developed for the clear visualization of morphological changes and microvasculature distribution in the prostate, as this is required for accurate diagnosis and biopsy. The probe consisted of a miniaturized 128-element 7 MHz convex array transducer with 134.5° field-of-view (FOV), a bifurcated optical fiber bundle, and two optical lenses. The design goal was to make the size of the TRUS-PA probe similar to that of general TRUS probes (i.e., about 20 mm), for the convenience of the patients. New flexible printed circuit board (FPCB), acoustic structure, and optical lens were developed to meet the requirement of the probe size, as well as to realize a high-performance TRUS-PA probe. In visual assessment, the PA signals obtained with the optical lens were 2.98 times higher than those without the lens. Moreover, the in vivo experiment with the xenograft BALB/c (Albino, Immunodeficient Inbred Strain) mouse model showed that TRUS-PA probe was able to acquire the entire PA image of the mouse tight behind the porcine intestine about 25 mm depth. From the ex vivo and in vivo experimental results, it can be concluded that the developed TRUS-PA probe is capable of improving PA image quality, even though the TRUS-PA probe has a cross-section size and an FOV comparable to those of general TRUS probes.
Assuntos
Técnicas Fotoacústicas , Neoplasias da Próstata , Animais , Humanos , Masculino , Camundongos , Camundongos Endogâmicos BALB C , Neoplasias da Próstata/diagnóstico por imagem , Suínos , UltrassonografiaRESUMO
Synthetic aperture focusing (SAF) and coherence factor weighting (CFW) have been used to improve the lateral resolution of ultrasound images. Although the two methods are effective for array-based ultrasound imaging, many researchers have also employed the methods for single-element-based imaging including intravascular ultrasound (IVUS) imaging. For single-element-based imaging, CFW is generally calculated from the scanlines obtained by SAF and applied to the scanline obtained after coherent summation of the SAF delayed scanlines, which is called a SAF-CFW method. In the paper, a theoretical model was derived to explore the effectiveness of SAF and CFW for single-element-based imaging, and the model was used to explain that SAF is not effective for IVUS imaging in terms of enhancing the spatial resolution, although it has the advantage of improving a contrast-to-noise ratio (CNR). This means that the SAF-CFW method is not optimal for improving the spatial resolution of IVUS imaging. In contrast, it was found in simulations and experiments that applying CFW to the target scanline itself is beneficial for the spatial resolution rather than a coherent summed scanline for IVUS SAF imaging, but CNR was not as good as SAF and SAF-CFW. As a result of both simulation and experimentation, it could be concluded that focused IVUS transducers without the application of those methods may be more advantageous to improve the spatial and contrast resolution simultaneously, considering the system complexity in the implementation of such imaging methods.
Assuntos
Aumento da Imagem/métodos , Transdutores , Ultrassonografia de Intervenção/métodos , Simulação por Computador , Desenho de Equipamento , Processamento de Imagem Assistida por Computador , Imagens de Fantasmas , Processamento de Sinais Assistido por ComputadorRESUMO
We developed a forward-looking (FL) multimodal endoscopic system that offers color, spectral classified, high-frequency ultrasound (HFUS) B-mode, and integrated backscattering coefficient (IBC) images for tumor detection in situ. Examination of tumor distributions from the surface of the colon to deeper inside is essential for determining a treatment plan of cancer. For example, the submucosal invasion depth of tumors in addition to the tumor distributions on the colon surface is used as an indicator of whether the endoscopic dissection would be operated. Thus, we devised the FL multimodal endoscopic system to offer information on the tumor distribution from the surface to deep tissue with high accuracy. This system was evaluated with bilayer gelatin phantoms which have different properties at each layer of the phantom in a lateral direction. After evaluating the system with phantoms, it was employed to characterize forty human colon tissues excised from cancer patients. The proposed system could allow us to obtain highly resolved chemical, anatomical, and macro-molecular information on excised colon tissues including tumors, thus enhancing the detection of tumor distributions from the surface to deep tissue. These results suggest that the FL multimodal endoscopic system could be an innovative screening instrument for quantitative tumor characterization.
Assuntos
Endoscopia , Compostos Radiofarmacêuticos , Colo/diagnóstico por imagem , Humanos , Imagens de Fantasmas , UltrassonografiaRESUMO
As a molecular imaging modality, photoacoustic (PA) imaging has been in the spotlight because it can provide an optical contrast image of physiological information and a relatively deep imaging depth. However, its sensitivity is limited despite the use of exogenous contrast agents due to the background PA signals generated from nontargeted absorbers, such as blood and boundaries between different biological tissues. In addition, clutter artifacts generated in both in-plane and out-of-plane imaging region degrade the sensitivity of PA imaging. We propose a method to eliminate the nontargeted PA signals. For this study, we used a dual-modal ultrasound (US)-PA contrast agent that is capable of generating both the backscattered US and PA signals in response to the transmitted US and irradiated light, respectively. The US images of the contrast agents are used to construct a masking image that contains the location information about the target site and is applied to the PA image acquired after contrast agent injection. In vitro and in vivo experimental results demonstrated that the masking image constructed using the US images makes it possible to completely remove nontargeted PA signals. The proposed method can be used to enhance the clear visualization of the target area in PA images.
Assuntos
Técnicas Fotoacústicas , Artefatos , Meios de Contraste , Ultrassom , UltrassonografiaRESUMO
Exosomes, which are released from all cells and take part in cell-to-cell communication, have been utilized as drug delivery vehicles in many recent studies. Immunotherapy is an emerging technology which uses patients' innate immune systems. In immunotherapy, immune cells are stimulated through antibodies, the other immune cells and genetic modifications for the purposes of, for instance, cancer therapy. In this study, tumor-derived re-assembled exosome (R-Exo) was simultaneously utilized as both a drug delivery carrier and an immunostimulatory agent. A chlorin e6 photosensitizer was loaded into tumor-derived exosomes during exosomal re-assembly. After this modification, R-Exo retains its original average size and has the same membrane proteins, which allows for targeting of tumor cells. Chlorin e6-loaded R-Exo (Ce6-R-Exo) can be visualized by photoacoustic imaging and can efficiently generate reactive oxygen species inside tumor cells under laser irradiation. In addition, Ce6-R-Exo increased the release of cytokines from immune cells, which indicates that these modified exosomes can be used as an immunotherapeutic agent. In conclusion, we developed a novel strategy that enables photoacoustic imaging-guided photodynamic and immune-combination therapy for the treatment of cancer with tumor-derived Ce6-R-Exo.
Assuntos
Exossomos , Nanopartículas , Neoplasias Pancreáticas , Técnicas Fotoacústicas , Fotoquimioterapia , Porfirinas , Linhagem Celular Tumoral , Humanos , Imunoterapia , Neoplasias Pancreáticas/diagnóstico por imagem , Neoplasias Pancreáticas/tratamento farmacológico , Fármacos FotossensibilizantesRESUMO
Bioresorbable vascular scaffold (BVS) has recently been spotlighted for its unique characteristics of absorbing into blood vessels and eventually disappearing. Although intravascular ultrasound (IVUS) is the most common guiding tool for stent deployment, the echogenicity of BVS struts has changed as the center of stent lumen and scanning rotation is not concentric, which may cause a critical erroneous measurement in practice. This study investigated the physical conditions for dimming the stent brightness in IVUS images using a finite-difference method (FDM) to numerically solve acoustic wave propagation through nonhomogeneous medium. The dimmed brightness is caused by an angled rectangular cross section of a strut and its similar acoustic impedance with water. Imaging frequency is not a major cause. However, the angle between the acoustic beam and the BVS surface is the major cause of the dimmed brightness. As a solution, an approach using a frequency compounding method with signal polarity comparator was proposed to recover the reduced brightness without sacrificing spatial resolutions. Based on the simulation study, the signal level from BVS can be attenuated down by 17 dB when the angle between the acoustic beamline and the surface of BVS is more than 45°. With the proposed frequency compounding approach, the reduced signal can be recovered by 6 dB. In the experimental BVS IVUS imaging, strut brightness was reduced by 18 dB with an angled strut position and recovered by 5 dB with the proposed frequency compounding method. A pig coronary was imaged to demonstrate the performance of the proposed method.
Assuntos
Implantes Absorvíveis , Vasos Coronários/diagnóstico por imagem , Processamento de Imagem Assistida por Computador/métodos , Ultrassonografia de Intervenção/métodos , Animais , Stents , SuínosRESUMO
OBJECTIVE: Interventional ultrasound imaging is a prerequisite for guiding implants and treatment within the hearts and blood vessels. Due to limitations on the catheter's diameter, interventional ultrasonic transducers have side-looking structures although forward-looking imaging may provide more intuitive and real time guidance in treating diseased sites ahead of catheters. To address the issue, a magnetically actuated forward-looking interventional ultrasound imaging device is implemented for the first time. METHODS: A forward-looking catheter containing a 1 mm ring type focused 35 MHz ultrasound transducer and a micro magnet, was fabricated. For imaging, the transducer was placed at the center of four electromagnetic coils positioned on four sides of a squared acrylic housing. By modifying the magnetic field, the catheter tip could be remotely translated for sector scanning. RESULTS: The scanning angle could reach up to 3° in 1 Hz with 15 mT, while wider angles of 5° could be achieved with a higher magnetic field of 25 mT for ex-vivo imaging. The position of the transducer could be detected by monitoring the motion with a CCD camera, mimicking clinical X-ray imaging. In the wire target and tissue mimicking phantom studies, the measured hole size, spatial resolution and distance between wires by the proposed system were comparable with the values from a linear scanner. Multi-frame real time data acquisition was demonstrated via ex-vivo imaging on a pig's coronary artery. CONCLUSION/SIGNIFICANCE: The feasibility of magnetically actuated forward-looking interventional ultrasound imaging was demonstrated. The remote-controlled scanning method may allow to simplify the structures of forward-looking interventional ultrasound imaging catheters.
Assuntos
Transdutores , Ultrassonografia de Intervenção , Desenho de Equipamento , Estudos de Viabilidade , Imagens de FantasmasRESUMO
OBJECTIVE: For accurate diagnosis of atherosclerosis, the high spatial and contrast resolutions of intravascular ultrasound (IVUS) images are a key requirement. Increasing the center frequency of IVUS is a simple solution to meet this requirement. However, this leads to a reduction in imaging depth due to the frequency-dependent attenuation of ultrasound. Here, we report a recently developed dual-element IVUS transducer for tissue harmonic imaging (THI) and frequency compounding to increase the spatial and contrast resolutions of IVUS images, while maintaining the imaging depth to assess the overall morphological change of blood vessels. METHODS: One 35-MHz element is used for producing general IVUS images and the other 70-MHz element is for receiving the second harmonic signals induced by the 35-MHz ultrasound. The fundamental and second harmonic signals can also be used for frequency compound imaging to further improve contrast resolution. The spatial and contrast resolutions achieved by the developed transducer were evaluated through wire and tissue-mimicking phantom imaging tests. Additionally, the images of a stent deployed in a tissue-mimicking phantom and an excised pig artery were acquired to assess clinical usefulness of the transducer. RESULTS: The results demonstrated that the developed IVUS transducer enables us to simultaneously examine the overall morphological change of blood vessels by the 35-MHz ultrasound images and the near vessel layers such as the intima, the media, and the adventitia by either THI or compound images with high spatial and contrast resolutions. In addition, the developed transducer facilitates the simultaneous acquisition of 35- and 70-MHz fundamental images when needed. CONCLUSION: The developed dual-element IVUS transducer makes it possible to fully realize the potential benefits of IVUS in the diagnosis of atherosclerosis.
Assuntos
Processamento de Imagem Assistida por Computador/métodos , Processamento de Sinais Assistido por Computador , Transdutores , Ultrassonografia de Intervenção/instrumentação , Animais , Artérias/diagnóstico por imagem , Desenho de Equipamento , Imagens de Fantasmas , Stents , Suínos , Ultrassonografia de Intervenção/métodosRESUMO
A noncontact single-beam acoustic trapping technique has proven to be a promising tool for cell manipulation and characterization that provide essential knowledge for a variety of biomedical applications. Here, we investigated cell characteristics as to whether the calcium responses of suspended breast cancer cells to different acoustic trapping forces are related to their invasiveness. For this, we combined a single-beam acoustic trapping system with a 30-MHz press-focused lithium niobate ultrasound transducer and an epifluorescence microscope. Using the system, intracellular calcium changes of suspended MDA-MB-231 (highly invasive) and MCF-7 (weakly invasive) cells were monitored while trapping the cells at different acoustic pressures. The results showed that a single suspended breast cancer cell isolated by the acoustic microbeam behaved differently on the calcium elevation in response to changes in acoustic trapping force, depending on its invasiveness. In particular, the MDA-MB-231 cells exhibited higher calcium elevation than MCF-7 cells when each cell was trapped at low acoustic pressure. Based on these results, we believe that the single-beam acoustic trapping technique has high potential as an alternative tool for determining the degree of invasiveness of suspended breast cancer cells.
Assuntos
Neoplasias da Mama , Cálcio , Análise de Célula Única/métodos , Ultrassonografia/métodos , Neoplasias da Mama/diagnóstico por imagem , Neoplasias da Mama/metabolismo , Neoplasias da Mama/fisiopatologia , Cálcio/metabolismo , Cálcio/fisiologia , Linhagem Celular Tumoral , Sobrevivência Celular , Desenho de Equipamento , Feminino , Humanos , Pinças Ópticas , Análise de Célula Única/instrumentação , Transdutores , Ultrassonografia/instrumentaçãoRESUMO
Complete blockage of a coronary artery, called chronic total occlusion (CTO), frequently occurs due to atherosclerosis. To reopen the obstructed blood vessels with a stent, guidewire crossing is performed with the help of angiography that can provide the location of CTO lesions and the image of guidewire tip. Since angiography is incapable of imaging inside a CTO lesion, the surgeons are blind during guidewire crossing. For this reason, the success rate of guidewire crossing relies upon the proficiency of the surgeon, which is considerably reduced from 69.0% to 32.5% if extensive calcification, not penetrated by a guidewire, exists in CTO lesions. In this paper, a recently developed 40-MHz forward-looking intravascular ultrasound (FLâ»IVUS) transducer to visualize calcification within CTO lesions is reported. This transducer consists of a single element angled aperture and a guidewire passage. The aperture is spherically deformed to have a focal length of 3 mm in order to improve spatial resolution of FLâ»IVUS images. The angle between the beam direction and the axis of rotation is designed to be 30° to effectively visualize calcification within a CTO lesion as well as the blood vessel wall. The experimental results demonstrated that the developed FLâ»IVUS transducer facilitates visualization of calcification within CTO lesions and makes it possible to help the surgeon make decisions about whether to push the guidewire in order to cross the lesion or to change the surgical procedure.
RESUMO
Although transrectal ultrasound (TRUS) imaging is widely used for screening and diagnosing prostate cancer, it is often not found on TRUS images, depending on its stage, size, and location. In addition, due to the weak echo signal and the low contrast of TRUS images, it is difficult to diagnose early-stage prostate cancers and distinguish malignant tumors from benign prostatic hyperplasia. For this reason, TRUS image-guided biopsy is mandatory to confirm the malignancy of the suspicious tumor, but the diagnostic accuracy of initial biopsy is only 20%-30%, so that the patients inevitably undergo repeated biopsies. TRUS-photoacoustic (TRUS-PA) imaging is one way to resolve those problems. However, the development of a TRUS-PA probe, in which an ultrasound array transducer and optical fibers are integrated, is demanding because the overall size of the probe should be as small as possible for the convenience of the patients, while providing the desired performances. Here, we report a recently developed TRUS-PA probe. The core element of the TRUS-PA is a miniaturized 128-element, 7-MHz convex array transducer of which size in the lateral and elevational directions is 11.4 and 5 mm, respectively. A new concept of a flexible printed circuit board was also developed to limit the size of the TRUS-PA probe to less than 15 mm. From the performance evaluation, it was found that the developed array with a field-of-view of 134° has a center frequency of 6.75 MHz, a -6-dB fractional bandwidth of 66%, and a crosstalk of less than -45 dB. In the tissue-mimicking phantom test and ex vivo experiments, the miniaturized convex array proved to be capable of providing combined US and PA images with acceptable imaging quality in spite of its small size.
Assuntos
Técnicas Fotoacústicas/instrumentação , Próstata/diagnóstico por imagem , Neoplasias da Próstata/diagnóstico por imagem , Ultrassonografia/instrumentação , Desenho de Equipamento , Humanos , Interpretação de Imagem Assistida por Computador , Masculino , Imagens de Fantasmas , Técnicas Fotoacústicas/métodos , Ultrassonografia/métodosRESUMO
The superharmonic imaging of tissue has the potential for high spatial and contrast resolutions, compared to the fundamental and second harmonic imaging. For this technique, the spectral bandwidth of an ultrasound transducer is divided for transmission of ultrasound and reception of its superharmonics (i.e., higher than the second harmonic). Due to the spectral division for the transmission and reception, transmitted ultrasound energy is not sufficient to induce superharmonics in media without using contrast agents, and it is difficult that a transducer has a -6 dB fractional bandwidth of higher than 100%. For the superharmonic imaging of tissue, thus, multi-frequency array transducers are the best choice if available; transmit and receive elements are separate and have different center frequencies. However, the construction of a multi-frequency transducer for intravascular ultrasound (IVUS) imaging is particularly demanding because of its small size of less than 1 mm. Here, we report a recently developed dual-element focused IVUS transducer for the third harmonic imaging of tissue, which consists of a 35-MHz element for ultrasound transmission and a 105-MHz element for third harmonic reception. For high quality third harmonic imaging, both elements were fabricated to have the same focus at 2.5 mm. The results of tissue mimicking phantom tests demonstrated that the third harmonic images produced by the developed transducer had higher spatial resolution and deeper imaging depth than the fundamental images.
Assuntos
Desenho de Equipamento , Transdutores , Ultrassonografia/instrumentação , Ultrassonografia/métodos , Imagens de FantasmasRESUMO
Tissue harmonic imaging (THI), an essential mode of commercial ultrasound imaging scanners, can provide images with high spatial and contrast resolutions. For THI, the frequency spectrum of a transducer is generally divided for the transmission of fundamental signal and the reception of its second harmonic. Therefore, it is difficult to use the THI mode for intravascular ultrasound (IVUS) imaging because typical IVUS transducers have a narrow -6-dB fractional bandwidth of about 50%. Due to its small aperture (about 0.5 mm) and the strength of IVUS being too weak, it is difficult to construct a high-quality tissue harmonic image. In this paper, we report a recently developed dual-frequency oblong-shaped-focused IVUS transducer for high-quality intravascular THI; the transducer consists of three elements arranged side by side in the horizontal (i.e., elevation) direction. The two outer elements with a center frequency of 35 MHz are responsible for ultrasound transmission and the center element has a center frequency of 70 MHz for the reception of the second-harmonic signals. All three elements have a spherical shape with a radius of 3 mm to efficiently generate harmonics in the region of interest. This configuration of the developed IVUS transducer was determined to facilitate high-quality THI, which was based on the results of Field II simulation and finite-element analysis. The images of wires and a tissue-mimicking phantom indicated that the tissue harmonic images produced by the developed transducer have not only a high spatial resolution but also a deep imaging depth, compared to the 35- and 70-MHz fundamental images.
Assuntos
Transdutores , Ultrassonografia de Intervenção/instrumentação , Desenho de Equipamento , Ondas de Choque de Alta Energia , Imagens de Fantasmas , Razão Sinal-RuídoRESUMO
As a minimally invasive method, sentinel lymph node biopsy (SLNB) in conjunction with guidance methods is the standard method to determine cancer metastasis in breast. The desired guidance methods for SLNB should be capable of precise SLN localization for accurate diagnosis of micro-metastases at an early stage of cancer progression and thus facilitate reducing the number of SLN biopsies for minimal surgical complications. For this, high sensitivity to the administered dyes, high spatial and contrast resolutions, deep imaging depth, and real-time imaging capability are pivotal requirements. Currently, various methods have been used for SLNB guidance, each with their own advantages and disadvantages, but no methods meet the requirements. In this review, we discuss the conventional SLNB guidance methods in this perspective. In addition, we focus on the role of the PA imaging modality on real-time SLN identification and biopsy guidance. In particular, PA-based hybrid imaging methods for precise SLN identification and efficient biopsy guidance are introduced, and their unique features, advantages, and disadvantages are discussed.
RESUMO
Photothermal therapy (PTT) has the capability for selective treatment, in which light delivered to the target is converted into heat and subsequently causes coagulative necrosis. However, optical scattering in biological media limits light penetration, thus reducing therapeutic efficacy. Here, we demonstrate that the temperatures generated by light and ultrasound energies can be added constructively in resected melanoma cancers, which causes an increase in treatment depth. This method is called dual thermal therapy (DTT). It is also shown that combined ultrasound and photoacoustic images acquired using the pulse sequence proposed in this paper can be used for real-time monitoring of DTT.