Nanochannel-Induced Efficient Water Splitting at the Superhydrophobic Interface.

Constructing a favorable reaction configuration at the water/catalyst interface is crucial for high-efficiency semiconductor-based water splitting. For a long time, a hydrophilic surface of semiconductor catalysts has been considered necessary for efficient mass transfer and adequate contact with water. In this work, by constructing a superhydrophobic PDMS-Ti3+/TiO2 interface (denoted P-TTO) with nanochannels arranged by nonpolar silane chains, we observe overall water splitting efficiencies improved by an order of magnitude under both the white light and simulated AM1.5G solar irradiation compared to the hydrophilic Ti3+/TiO2 interface. The electrochemical overall water splitting potential on the P-TTO electrode also decreased from 1.62 to 1.27 V, which is close to the thermodynamic limit of 1.23 V. Through the in situ diffuse reflection infrared Fourier transform spectroscopy, a nanochannel-induced water configuration transition is directly detected. The density functional theory calculation further verifies the lower reaction energy of water decomposition at the water/PDMS-TiO2 interface. Our work achieves efficient overall water splitting through nanochannel-induced water configurations without changing the bulk of semiconductor catalyst, which reveals the significant role of water status at the interface in the efficiency of the water splitting reaction over the properties of catalyst materials.

Janus-like Bx C/C Quantum Sheets with Z-Scheme Mechanism Strengthen Tumor Photothermal-Immunotherapy in NIR-II Biowindow.

Carbon dots (CDs) are one of the most popular photothermal agents (PTAs) as a noninvasive strategy for tumor treatment. However, because of the inherent dominant fluorescent emission, the CDs-based PTAs hardly achieve a single photothermal conversion, which causes low photothermal conversion efficiency and poor photothermal performance. In this regard, finding a new CDs-based material system to greatly restrain its fluorescence to enhance its photothermal conversion efficiency is highly required, however, it is still a grand challenge. Herein, a kind of Z-scheme CDs-based PTAs consisting of 2D ultrathin nonmetallic Bx C/C Janus quantum sheets (Bx C/C JQSs) is reported to greatly enhance the photothermal conversion efficiency. It is demonstrated that the heterogeneous growth of Z-scheme Bx C/C JQSs enables the NIR-driven quick injection of hot electrons from C into the conjugated Bx C, realizing a single conversion of light to heat, and resulting in a high photothermal conversion of 60.0% in NIR-II. Furthermore, these new Z-scheme Bx C/C-polyethylene glycol JQSs display outstanding biocompatibility and show effective tumor elimination outcome both in vitro and in vivo through the synergistic photothermal-immunotherapy in the NIR-II biowindow with undetectable harm to normal tissues.

High-Index Faceted PdPtCu Ultrathin Nanorings Enable Highly Active and Stable Oxygen Reduction Electrocatalysis.

Ultrathin nanosheet catalysts deliver great potential in catalyzing the oxygen reduction reaction (ORR), but encounter the ceiling of the surface atomic utilizations, thus presenting a challenge associated with further boosting catalytic activity. Herein, a kind of PdPtCu ultrathin nanorings with increased numbers of electrocatalytically active sites is reported, with the purpose of breaking the activity ceiling of conventional catalysts. The as-made PdPtCu nanorings possess abundant high-index facets at the edge of both the exterior and interior surfaces. An ultrahigh electrochemical active surface area of 92.2 m2 g-1 PGM is achieved on this novel catalyst, much higher than that of the commercial Pt/C catalyst. The optimized Pd39 Pt33 Cu28 /C shows a great enhanced ORR activity with a specific activity of 2.39 mA cm-2 and a mass activity of 1.97 A mg-1 PGM at 0.9 V (versus RHE), as well as superior durability within 30 000 cycles. Density function theory calculations reveal that the high-index facets and alloying Cu atoms can optimize the oxygen adsorption energy, explaining the enhanced ORR activity. Overcoming a key technical barrier in sub-nanometer electrocatalysts, this work successfully introduces the hollow structures into the ultrathin nanosheets, heralding the exciting prospects of high-performance ORR catalysts in fuel cells.

Sub-Monolayer YOx /MoOx on Ultrathin Pt Nanowires Boosts Alcohol Oxidation Electrocatalysis.

A crucial issue restricting the application of direct alcohol fuel cells (DAFCs) is the low activity of Pt-based electrocatalysts for alcohol oxidation reaction caused by the reaction intermediate (CO*) poisoning. Herein, a new strategy is demonstrated for making a class of sub-monolayer YOx /MoOx -surface co-decorated ultrathin platinum nanowires (YOx /MoOx -Pt NWs) to effectively eliminate the CO poisoning for enhancing methanol oxidation electrocatalysis. By adjusting the amounts of YOx and MoOx decorated on the surface of ultrathin Pt NWs, the optimized 22% YOx /MoOx -Pt NWs achieve a high specific activity of 3.35 mA cm-2 and a mass activity of 2.10 A mgPt -1 , as well as the enhanced stability. In situ Fourier transform infrared (FTIR) spectroscopy and CO stripping studies confirm the contribution of YOx and MoOx to anti-CO poisoning ability of the NWs. Density functional theory (DFT) calculations further reveal that the surface Y and Mo atoms with oxidation states allow COOH* to bind the surface through both the carbon and oxygen atoms, which can lower the free energy barriers for the oxidation of CO* into COOH*. The optimal NWs also show the superior activities toward the electro-oxidation of ethanol, ethylene glycol, and glycerol.

Single-atom Pt-I3 sites on all-inorganic Cs2SnI6 perovskite for efficient photocatalytic hydrogen production.

Organic-inorganic lead halide perovskites are a new class of semiconductor materials with great potential in photocatalytic hydrogen production, however, their development is greatly plagued by their low photocatalytic activity, instability of organic component and lead toxicity in particular. Herein, we report an anti-dissolution environmentally friendly Cs2SnI6 perovskite anchored with a new class of atomically dispersed Pt-I3 species (PtSA/Cs2SnI6) for achieving the highly efficient photocatalytic hydrogen production in HI aqueous solution at room temperature. Particularly, we discover that Cs2SnI6 in PtSA/Cs2SnI6 has a greatly enhanced tolerance towards HI aqueous solution, which is very important for achieving excellent photocatalytic stability in perovskite-based HI splitting system. Remarkably, the PtSA/Cs2SnI6 catalyst shows a superb photocatalytic activity for hydrogen production with a record turnover frequency of 70.6 h-1 per Pt, about 176.5 times greater than that of Pt nanoparticles supported Cs2SnI6 perovskite, along with superior cycling durability. Charge-carrier dynamics studies in combination with theory calculations reveal that the dramatically boosted photocatalytic performance on PtSA/Cs2SnI6 originates from both unique coordination structure and electronic property of Pt-I3 sites, and strong metal-support interaction effect that can not only greatly promote the charge separation and transfer, but also substantially reduce the energy barrier for hydrogen production. This work opens a new way for stimulating more research on perovskite composite materials for efficient hydrogen production.

One Nanometer PtIr Nanowires as High-Efficiency Bifunctional Catalysts for Electrosynthesis of Ethanol into High Value-Added Multicarbon Compound Coupled with Hydrogen Production.

The electrosynthesis of high-value-added multicarbon compounds coupled with hydrogen production is an efficient way to achieve carbon neutrality; however, the lack of effective bifunctional catalysts in electrosynthesis largely hinders its development. Herein, we report the first example on the highly efficient electrosynthesis of high-value-added 1,1-diethoxyethane (DEE) at the anode and high-purity hydrogen at the cathode using 1 nm PtIr nanowires (NWs) as the bifunctional catalysts. We demonstrate that the cell using 1 nm PtIr nanowires as the bifunctional catalysts can achieve a reported lowest voltage of 0.61 V to reach the current density of 10 mA cm-2, much lower than those of the Pt NWs (0.85 V) and commercial Pt/C (0.86 V), and also can have the highest Faraday efficiencies of 85% for DEE production and 94.0% for hydrogen evolution in all the reported electrosynthesis catalysts. The in situ infrared spectroscopy study reveals that PtIr NWs can facilitate the activation of O-H and C-H bonds in ethanol, which is important for the formation of acetaldehyde intermediate, and finally DEE. In addition, the cell using PtIr NWs as bifunctional catalysts exhibits excellent stability by showing almost no obvious decrease in the Faraday efficiency of the DEE production.

Emerging Dual-Atomic-Site Catalysts for Efficient Energy Catalysis.

Atomically dispersed metal catalysts with well-defined structures have been the research hotspot in heterogeneous catalysis because of their high atomic utilization efficiency, outstanding activity, and selectivity. Dual-atomic-site catalysts (DASCs), as an extension of single-atom catalysts (SACs), have recently drawn surging attention. The DASCs possess higher metal loading, more sophisticated and flexible active sites, offering more chance for achieving better catalytic performance, compared with SACs. In this review, recent advances on how to design new DASCs for enhancing energy catalysis will be highlighted. It will start with the classification of marriage of two kinds of single-atom active sites, homonuclear DASCs and heteronuclear DASCs according to the configuration of active sites. Then, the state-of-the-art characterization techniques for DASCs will be discussed. Different synthetic methods and catalytic applications of the DASCs in various reactions, including oxygen reduction reaction, carbon dioxide reduction reaction, carbon monoxide oxidation reaction, and others will be followed. Finally, the major challenges and perspectives of DASCs will be provided.

Exclusive Strain Effect Boosts Overall Water Splitting in PdCu/Ir Core/Shell Nanocrystals.

Core/shell nanocatalysts are a class of promising materials, which achieve the enhanced catalytic activities through the synergy between ligand effect and strain effect. However, it has been challenging to disentangle the contributions from the two effects, which hinders the rational design of superior core/shell nanocatalysts. Herein, we report precise synthesis of PdCu/Ir core/shell nanocrystals, which can significantly boost oxygen evolution reaction (OER) via the exclusive strain effect. The heteroepitaxial coating of four Ir atomic layers onto PdCu nanoparticle gives a relatively thick Ir shell eliminating the ligand effect, but creates a compressive strain of ca. 3.60%. The strained PdCu/Ir catalysts can deliver a low OER overpotential and a high mass activity. Density functional theory (DFT) calculations reveal that the compressive strain in Ir shell downshifts the d-band center and weakens the binding of the intermediates, causing the enhanced OER activity. The compressive strain also boosts hydrogen evolution reaction (HER) activity and the strained nanocrystals can be served as excellent catalysts for both anode and cathode in overall water-splitting electrocatalysis.

Designing noble metal single-atom-loaded two-dimension photocatalyst for N2 and CO2 reduction via anion vacancy engineering.

Building highly active and stable noble metal single atom (MSA) catalyst onto photocatalyst materials for nitrogen reduction reaction (NRR) and CO2 reduction reaction (CRR) is a key to future renewable energy conversion and storage technologies. Here we present a design strategy to optimize the stability and electronic property of noble metal single atoms (MSAs, M = Rh, Pd, Ag, Ir, Pt, Au) catalyst supported on g-C3N4 and 2H-MoS2 photocatalysts towards NRR and CRR. Our results indicate that the MSAs tend to be trapped at the anion-vacancy sites of photocatalyst rather than the pristine photocatalyst surface. This anion vacancy can promise the MSAs with an optimized electron-captured ability in the photoexcitation process, thus decreasing the energy barriers of NRR and CRR on MSAs. Especially, it is revealed that the N-vacancy-stabilized IrSA on g-C3N4 and the S-vacancy-stabilized RhSA on 2H-MoS2 own the lowest energy barrier in NRR. However, for CRR, the HCOOH is the main product on MSAs supported by g-C3N4 and 2H-MoS2. The N-vacancy-stabilized PdSA on g-C3N4 and the S-vacancy-stabilized AuSA on 2H-MoS2 show the lowest energy barrier for HCOOH production in CRR. This finding offers an approach to design specific active MSA centres on photocatalysts by the anion vacancy engineering.

Atomically Dispersed Co-P3 on CdS Nanorods with Electron-Rich Feature Boosts Photocatalysis.

The development of highly efficient photocatalytic systems with rapid photogenerated charge separation and high surface catalytic activity is highly desirable for the storage and conversion of solar energy, yet remains a grand challenge. Herein, a conceptionally new form of atomically dispersed Co-P3 species on CdS nanorods (CoPSA-CdS) is designed and synthesized for achieving unprecedented photocatalytic activity for the dehydrogenation of formic acid (FA) to hydrogen. X-ray absorption near edge structure, X-ray photoelectron spectroscopy, and time-resolved photoluminescence results confirm that the Co-P3 species have a unique electron-rich feature, greatly improving the efficiency of photogenerated charge separation through an interface charge effect. The in situ attenuated total reflection infrared spectra reveal that the Co-P3 species can achieve much better dissociation adsorption of FA and activation of CH bonds than traditional sulfur-coordinated Co single atom-loaded CdS nanorods (CoSSA-CdS). These two new features make CoPSA-CdS exhibit the unprecedented 50-fold higher activity in the photocatalytic dehydrogenation of FA than CoSSA-CdS, and also much better activity than the Ru-, Rh-, Pd-, or Pt-loaded CdS. Besides, CoPSA-CdS also shows the highest mass activity (34309 mmol gCo -1 h-1 ) of Co reported to date. First-principles simulation reveals that the Co-P3 species herein can form an active PHCOO intermediate for enhancing the rate-determining dissociation adsorption of FA.

Thermolysis of Noble Metal Nanoparticles into Electron-Rich Phosphorus-Coordinated Noble Metal Single Atoms at Low Temperature.

Noble metal single atoms coordinated with highly electronegative atoms, especially N and O, often suffer from an electron-deficient state or poor stability, greatly limiting their wide application in the field of catalysis. Herein we demonstrate a new PH3 -promoted strategy for the effective transformation of noble metal nanoparticles (MNPs, M=Ru, Rh, Pd) at a low temperature (400 °C) into a class of thermally stabilized phosphorus-coordinated metal single atoms (MPSAs) on g-C3 N4 nanosheets via the strong Lewis acid-base interaction between PH3 and the noble metal. Experimental work along with theoretical simulations confirm that the obtained Pd single atoms supported on g-C3 N4 nanosheets exist in the form of PdP2 with a novel electron-rich feature, conceptionally different from the well-known single atoms with an electron-deficient state. As a result of this new electronic property, PdP2 -loaded g-C3 N4 nanosheets exhibit 4 times higher photocatalytic H2 production activity than the state-of-art N-coordinated PdSAs supported on g-C3 N4 nanosheets. This enhanced photocatalytic activity of phosphorus-coordinated metal single atoms with an electron-rich state was quite general, and also observed for other active noble metal single atom catalysts, such as Ru and Rh.

Synergetic interaction between neighboring platinum and ruthenium monomers boosts CO oxidation.

Sub-nanometer noble metal catalysts, especially single atom (SA), are a new class of catalytic materials for boosting catalysis and possess unique catalytic properties and high atomic utilization efficiency. Exploring the interaction between two neighboring atom monomers has great potential to further improve the performance of SA catalysts and deepen the understanding on the catalytic mechanism of heterogeneous catalysis at the atomic level. Herein, we demonstrate that the synergetic effect between neighboring Pt and Ru monomers supported on N vacancy-rich g-C3N4 promotes the catalytic CO oxidation. The experimental observation and theoretical simulation reveal that the N vacancy in the g-C3N4 structure builds an optimized triangular sub-nanometer cavity for stabilizing the neighboring Pt-Ru monomers by forming Pt-C and Ru-N bonds. The mechanistic studies based on the in situ IR spectrum and theoretical simulation confirm that the neighboring Pt-Ru monomers possess a higher performance for optimizing O2 activation than Ru-Ru/Pt-Pt monomers or isolated Ru/Pt atoms by balancing the energy evolution of reaction steps in the catalytic CO oxidation. The discovery of the synergetic effect between neighboring monomers may create a new path for manipulating the catalytic properties of SA catalysts.

Ultrathin PtNiM (M = Rh, Os, and Ir) Nanowires as Efficient Fuel Oxidation Electrocatalytic Materials.

The development of new electrocatalysts with high activity and durability for alcohol oxidation is an emerging need of direct alcohol fuel cells. However, the commonly used Pt-based catalysts still exhibit drawbacks including limited catalytic activity, high overpotential, and severe CO poisoning. Here a general approach is reported for preparing ultrathin PtNiM (M = Rh, Os, and Ir) nanowires (NWs) with excellent anti-CO-poisoning ability and high activity. Owing to their superior nanostructure and optimal electronic interaction, the ultrathin PtNiM NWs show enhanced electrocatalytic performance for both methanol oxidation reaction (MOR) and ethanol oxidation reaction (EOR). The optimal PtNiRh NWs show mass activity of 1.72 A mg-1 and specific activity of 2.49 mA cm-2 for MOR, which are 3.17 and 2.79 times higher than those of Pt/C. In particular, the onset potentials of PtNiRh NWs for MOR and EOR shift down by about 65 and 85 mV compared with those of Pt/C. Density functional theory calculations further verify their high antipoison properties for MOR and EOR from both an electronic and energetic perspective. Facilitated by the introduction of Rh and Ni, the stable pinning of the Pt 5d band associated with electron-rich and depletion centers solves the dilemma between reactivity and anti-CO poisoning.

MXene/Si@SiO x@C Layer-by-Layer Superstructure with Autoadjustable Function for Superior Stable Lithium Storage.

Despite its very high capacity (4200 mAh g-1), the widespread application of the silicon anode is still hampered by severe volume changes (up to 300%) during cycling, which results in electrical contact loss and thus dramatic capacity fading with poor cycle life. To address this challenge, 3D advanced Mxene/Si-based superstructures including MXene matrix, silicon, SiO x layer, and nitrogen-doped carbon (MXene/Si@SiO x@C) in a layer-by-layer manner were rationally designed and fabricated for boosting lithium-ion batteries (LIBs). The MXene/Si@SiO x@C anode takes the advantages of high Li+ ion capacity offered by Si, mechanical stability by the synergistic effect of SiO x, MXene, and N-doped carbon coating, and excellent structural stability by forming a strong Ti-N bond among the layers. Such an interesting superstructure boosts the lithium storage performance (390 mAh g-1 with 99.9% Coulombic efficiency and 76.4% capacity retention after 1000 cycles at 10 C) and effectively suppresses electrode swelling only to 12% with no noticeable fracture or pulverization after long-term cycling. Furthermore, a soft package full LIB with MXene/Si@SiO x@C anode and Li[Ni0.6Co0.2Mn0.2]O2 (NCM622) cathode was demonstrated, which delivers a stable capacity of 171 mAh g-1 at 0.2 C, a promising energy density of 485 Wh kg-1 based on positive active material, as well as good cycling stability for 200 cycles even after bending. The present MXene/Si@SiO x@C becomes among the best Si-based anode materials for LIBs.

Visible-Light Direct Conversion of Ethanol to 1,1-Diethoxyethane and Hydrogen over a Non-Precious Metal Photocatalyst.

Converting renewable biomass and their derivatives into chemicals and fuels has received much attention to reduce the dependence on fossil resources. Photocatalytic ethanol dehydrogenation-acetalization to prepare value-added 1,1-diethoxyethane and H2 was achieved over non-precious metal CdS/Ni-MoS2 catalyst under visible light. The system displays an excellent production rate and high selectivity of 1,1-diethoxyethane, 52.1 mmol g-1 h-1 and 99.2 %, respectively. In-situ electron spin resonance, photoluminescence spectroscopy and transient photocurrent responses were conducted to investigate the mechanism. This study provides a promising strategy for a green application of bioethanol.

Strongly Coupled Nickel-Cobalt Nitrides/Carbon Hybrid Nanocages with Pt-Like Activity for Hydrogen Evolution Catalysis.

Designing non-precious-metal catalysts with comparable mass activity to state-of-the-art noble-metal catalysts for the hydrogen evolution reaction (HER) in alkaline solution still remains a significant challenge. Herein a new strongly coupled nickel-cobalt nitrides/carbon complex nanocage (NiCoNzocage) is rationally designed via chemical etching of ZIF-67 nanocubes with Ni(NO3 )2 under sonication at room temperature, following nitridation. The as-prepared strongly coupled NiCoN/C nanocages exhibit a mass activity of 0.204 mA µg-1 at an overpotential of 200 mV for the HER in alkaline solution, which is comparable to that of commercial Pt/C (0.451 mA µg-1 ). The strongly coupled NiCoN/C nanocages also possess superior stability for the HER with negligible current loss under the overpotentials of 200 mV for 10 h. Density functional theory (DFT) calculations reveal that the excellent HER performance under alkaline condition arises from the robust Co2+ →Co0 transformation achieved by strong (Ni, Co)N-bonding-induced efficient d-p-d coupled electron transfer, which is a key for optimal initial water adsorption and splitting. The high degree of amorphization urges the C-sites to be an electron-pushing bath to promote the inter-layer/sites electron-transfer with loss of the orbital-selection-forbidden-rule, which uniformly boosts the surface catalytic activities up to a high level independent of the individual surface active sites.

Ultrathin Visible-Light-Driven Mo Incorporating In2 O3 -ZnIn2 Se4 Z-Scheme Nanosheet Photocatalysts.

Inspired by natural photosynthesis, the design of new Z-scheme photocatalytic systems is very promising for boosting the photocatalytic performance of H2 production and CO2 reduction; however, until now, the direct synthesis of efficient Z-scheme photocatalysts remains a grand challenge. Herein, it is demonstrated that an interesting Z-scheme photocatalyst can be constructed by coupling In2 O3 and ZnIn2 Se4 semiconductors based on theoretical calculations. Experimentally, a class of ultrathin In2 O3 -ZnIn2 Se4 (denoted as In2 O3 -ZISe) spontaneous Z-scheme nanosheet photocatalysts for greatly enhancing photocatalytic H2 production is made. Furthermore, Mo atoms are incorporated in the Z-scheme In2 O3 -ZISe nanosheet photocatalyst by forming the MoSe bond, confirmed by X-ray photoelectron spectroscopy, in which the formed MoSe2 works as cocatalyst of the Z-scheme photocatalyst. As a consequence, such a unique structure of In2 O3 -ZISe-Mo makes it exhibit 21.7 and 232.6 times higher photocatalytic H2 evolution activity than those of In2 O3 -ZnIn2 Se4 and In2 O3 nanosheets, respectively. Moreover, In2 O3 -ZISe-Mo is also very stable for photocatalytic H2 production by showing almost no activity decay for 16 h test. Ultraviolet-visible diffuse reflectance spectra, photoluminescence spectroscopy, transient photocurrent spectra, and electrochemical impedance spectroscopy reveal that the enhanced photocatalytic performance of In2 O3 -ZISe-Mo is mainly attributed to its widened photoresponse range and effective carrier separation because of its special structure.