Size Control and Antioxidant Properties of Sulfur-Rich Polymer Colloids from Interfacial Polymerization.

High sulfur content polymeric materials, known for their intriguing properties such as high refractive indices and high electrochemical capacities, have garnered significant interest in recent years for their applications in optics, antifouling surfaces, triboelectrics, and electrochemistry. Despite the high interest, most high sulfur-content polymers reported to date are either bulk materials or thin films, and there is a general lack of research into sulfur-rich polymer colloids. Water-dispersed, sulfur-rich particles are anticipated to broaden the range of applications for sulfur-containing materials. In this study, the preparation and size control parameters are presented of an aqueous dispersion of sulfur-rich polymers with the sulfur content of dispersed particles exceeding 75 wt%. Employing polymeric stabilizers with varying hydrophilic-lipophilic balance (HLB), along with changing the rank of inorganic polysulfides, allow for the control of particle size in the range of 360 nm - 1.8 µm. The sulfur-rich colloid demonstrates antioxidant properties in water, demonstrating the potential for the use of sulfur-rich polymeric materials readily removable, heterogeneous radical scavengers.

Network of Inorganic Nanocrystals Can Swell: Study of Swelling-Induced Surface Instability.

A unique organic-inorganic hybrid network composed of inorganic nanocores (ranging from semiconductors to metallic ones) interconnected through organic molecules can be produced by crosslinking the organic ligands of colloidal inorganic nanocrystals in assemblies. This work reports that this network, which is conventionally considered an inorganic film, can swell when exposed to a solvent because of the interaction between the solvent and the organic linkage within the network. Intriguingly, this work discovers that drying the solvent of the swollen organic-inorganic hybrid network can significantly affect the morphology owing to the swelling-induced compress stress, which is widely observed in various organic network systems. This work studies the surface instability of crosslinked organic-inorganic hybrid networks swollen by various organic solvents, which led to buckling delamination. Specifically, this work investigates the effects of the i) solvent-network interaction, ii) crosslinking density of the network, and iii) thickness of the film on the delamination behavior of the crosslinked network.

Coherent heteroepitaxial growth of I-III-VI2 Ag(In,Ga)S2 colloidal nanocrystals with near-unity quantum yield for use in luminescent solar concentrators.

Colloidal Ag(In,Ga)S2 nanocrystals (AIGS NCs) with the band gap tunability by their size and composition within visible range have garnered surging interest. High absorption cross-section and narrow emission linewidth of AIGS NCs make them ideally suited to address the challenges of Cd-free NCs in wide-ranging photonic applications. However, AIGS NCs have shown relatively underwhelming photoluminescence quantum yield (PL QY) to date, primarily because coherent heteroepitaxy has not been realized. Here, we report the heteroepitaxy for AIGS-AgGaS2 (AIGS-AGS) core-shell NCs bearing near-unity PL QYs in almost full visible range (460 to 620 nm) and enhanced photochemical stability. Key to the successful growth of AIGS-AGS NCs is the use of the Ag-S-Ga(OA)2 complex, which complements the reactivities among cations for both homogeneous AIGS cores in various compositions and uniform AGS shell growth. The heteroepitaxy between AIGS and AGS results in the Type I heterojunction that effectively confines charge carriers within the emissive core without optically active interfacial defects. AIGS-AGS NCs show higher extinction coefficient and narrower spectral linewidth compared to state-of-the-art heavy metal-free NCs, prompting their immediate use in practicable applications including displays and luminescent solar concentrators (LSCs).

Versatile Mesoporous Microblocks Prepared by Pattern-Induced Cracking of Colloidal Films.

Mesoporous microparticles have the potential to be used in various fields, such as energy generation, sensing, and the environmental field. Recently, the process of making homogeneous microparticles in an economical and environmentally friendly way has gained much attention. Herein, rectangular mesoporous microblocks of various designs are produced by manipulating the fragmentation of colloidal films consisting of micropyramids while controlling the notch angles of pyramidal edges. During calcination of the colloidal films, cracks are generated in the valleys of micropyramids acting as notches, and the angle of notches can be controlled by the prepattern underneath the micropyramids. By changing the location of notches with sharp angles, the shape of microblocks can be controlled with excellent uniformity. After detaching the microblocks from substrates, mesoporous microparticles of various sizes with multiple functions are easily produced. This study demonstrates anti-counterfeiting functions by encoding the rotation angles of rectangular microblocks of various sizes. In addition, the mesoporous microparticles can be utilized for separating desired chemicals mixed with chemicals of different charges. The method of fabricating size-tunable functionalized mesoporous microblocks can be a platform technology to prepare special films and catalysts and for environmental applications.

Sequentially Coated Wavy Nanowire Composite Transparent Electrode for Stretchable Solar Cells.

Recent advances in fabricating stretchable and transparent electrodes have led to various techniques for establishing next-generation form-factor optoelectronic devices. Wavy Ag nanowire networks with large curvature radii are promising platforms as stretchable and transparent electrodes due to their high electrical conductivity and stretchability even at very high transparency. However, there are disadvantages such as intrinsic nonregular conductivity, large surface roughness, and nanowire oxidation in air. Here, we introduce electrically synergistic but mechanically independent composite electrodes by sequentially introducing conducting polymers and ionic liquids into the wavy Ag nanowire network to maintain the superior performance of the stretchable transparent electrode while ensuring overall conductivity, lower roughness, and long-term stability. In particular, plenty of ionic liquids can be incorporated into the uniformly coated conducting polymer so that the elastic modulus can be significantly lowered and sliding can occur at the nanowire interface, thereby obtaining the high mechanical stretchability of the composite electrode. Finally, as a result of applying the composite film as the stretchable transparent electrode of stretchable organic solar cells, the organic solar cell exhibits a high power conversion efficiency of 11.3% and 89% compared to the initial efficiency even at 20% tensile strain, demonstrating excellent stretching stability.

Advances in cell coculture membranes recapitulating in vivo microenvironments.

Porous membranes play a critical role in in vitro heterogeneous cell coculture systems because they recapitulate the in vivo microenvironment to mediate physical and biochemical crosstalk between cells. While the conventionally available Transwell® system has been widely used for heterogeneous cell coculture, there are drawbacks to precise control over cell-cell interactions and separation for implantation. The size and numbers of the pores and the thickness of the porous membranes are crucial in determining the efficiency of paracrine signaling and direct junctions between cocultured cells, and significantly impact on the performance of heterogeneous cell cultures. These opportunities and challenges have motivated the design of advanced coculture platforms through improvement of the structural and functional properties of porous membranes.

Cracking of Colloidal Films to Generate Rectangular Fragments.

Cracks are common in nature. Cracking is known as an irreversible and uncontrollable process. To control the cracking patterns, many researchers have proposed methods to prepare notches for stress localization on films. In this work, we investigate a method of controlling cracks by making microscale pyramid patterns that have notches between the pyramids. After preparing pyramid patterns consisting of colloidal particles with organic residue, we annealed them to induce volume shrinkage and cracking between the pyramids. We studied the effect of film thickness on cracking and the generation of rectangular fragments consisting of multiple pyramids. The area of rectangular fragments was in good agreement with the results of scaling analysis. The concept of controlling cracks by imprinting notches on a film and the relationship with the film thickness can guide the study of cracking phenomena.

High strength, epoxy cross-linked high sulfur content polymers from one-step reactive compatibilization inverse vulcanization.

Inverse vulcanization provides a simple, solvent-free method for the preparation of high sulfur content polymers using elemental sulfur, a byproduct of refining processes, as feedstock. Despite the successful demonstration of sulfur polymers from inverse vulcanization in optical, electrochemical, and self-healing applications, the mechanical properties of these materials have remained limited. We herein report a one-step inverse vulcanization using allyl glycidyl ether, a heterobifunctional comonomer. The copolymerization, which proceeds via reactive compatibilization, gives an epoxy cross-linked sulfur polymer in a single step, as demonstrated through isothermal kinetic experiments and solid-state 13C NMR spectroscopy. The resulting high sulfur content (≥50 wt%) polymers exhibited tensile strength at break in the range of 10-60 MPa (70-50 wt% sulfur), which represents an unprecedentedly high strength for high sulfur content polymers from vulcanization. The resulting high sulfur content copolymer also exhibited extraordinary shape memory behavior along with shape reprogrammability attributed to facile polysulfide bond rearrangement.

Antifreeze and Rheological Properties of Injectable Triblock Copolymer Hydrogels with Supramolecular Junctions.

ABC triblock copolymers composed of hydrophobic poly(ε-caprolactone) (PCL), zwitterionic poly(carboxybetaine methacrylate) midblock, and P(PEGMA-UPy0.15 ) containing supramolecular ureidopyrimidinone moieties, poly(ε-caprolactone-block-carboxybetaine methacrylate-block-[poly(ethylene glycol) methyl ether methacrylate-co-(α-methacryloyl-ω-(6-(3-(6-methyl-4-oxo-1,4-dihydropyrimidin-2-yl)ureido)hexylcarbamoyloxy)poly(ethylene glycol))]), are investigated to achieve multifunctional antifreeze hydrogels. The PCL and P(PEGMA-UPy0.15 ) blocks induce the formation of physical network with a hierarchical nanostructure comprising hydrophobic PCL cores and supramolecular junctions, respectively. The super-hydrophilic nature of polyzwitterion midblocks and the confinement effect of the supramolecular junctions enhance the antifreeze performance, where the majority of water molecules remains supercooled below sub-zero temperature. The hydrogel relaxation characterized over a wide range of timescale reveals that the facile dynamics of the supramolecular junctions lead to the self-healing and injectability of the hydrogels. In conjunction with the biodegradable PCL cores, the antifreeze and rheological characteristics of the triblock copolymer hydrogels provide significant potential to use for cryo-preservable and bio-injectable drug storage and delivery.

Transparent, Ultrahigh-Refractive Index Polymer Film (n ∼1.97) with Minimal Birefringence (Δn <0.0010).

High refractive index (RI) thin films are of critical importance for advanced optical devices, and the high refractive index polymers (HRIPs) constitute an interesting class of materials for high RI thin films due to low cost, good processability, light weight, and high flexibility. However, HRIPs have yet to realize their full potential in high RI thin film applications due to their relatively low RI, strong absorption in the blue light region, and limited film formation methods such as rapid vitrification. Herein, we report a development of a new HRIP thin film generated through a one-step vapor-phase process, termed sulfur chemical vapor deposition (sCVD), using elemental sulfur and divinyl benzene. The developed poly(sulfur-co-divinyl benzene) (pSDVB-sCVD) film exhibited RI (measured at 632.8 nm) exceeding 1.97, one of the highest RIs among polymers without metallic elements reported to date. Because the sCVD utilized vaporized sulfur with a unique sulfur-cracking step, formation of long polysulfide chains was suppressed efficiently, while high sulfur content as high as 85 wt % could be achieved with no apparent phase separation. Unlike most of inorganic high RI materials, pSDVB-sCVD was highly transparent in the entire visible range and showed extremely low birefringence of 10 × 10-4. The HRIP thin film with unprecedentedly high RI, together with outstanding transparency and low birefringence, will serve as a key component in a wide range of high-end optical device applications.

Issues and Advances in Scaling up Sulfide-Based All-Solid-State Batteries.

ConspectusAll-solid-state batteries (ASSBs) are considered to be a next-generation energy storage concept that offers enhanced safety and potentially high energy density. The identification of solid electrolytes (SEs) with high ionic conductivity was the stepping-stone that enabled the recent surge in activity in this research area. Among the various types of SEs, including those based on oxides, sulfides, polymers, and hybrids thereof, sulfide-based SEs have gained discernible attention owing to their exceptional room temperature ionic conductivity comparable even to those of their liquid electrolyte counterparts. Moreover, the good deformability of sulfide SEs renders them suitable for reducing the interfacial resistance between particles, thereby obviating the need for high-temperature sintering. Nevertheless, sulfide-based ASSB technology still remains at the research stage without any manufacturing schemes having been established. This state of affairs originates from the complex challenges presented by various aspects of these SEs: their weak stability in air, questions surrounding the exact combination of slurry solvent and polymeric binder for solution-based electrode fabrication, their high interfacial resistance resulting from solid particle contacts, and limited scalability with respect to electrode fabrication and cell assembly. In this Account, we review recent developments in which these issues were addressed by starting with the materials and moving on to processing, focusing on new trials. As for enhancing the air stability of sulfide SEs, strengthening the metal-sulfur bond based on the hard-soft acid-base (HSAB) theory has yielded the most notable results, although the resulting sacrificed energy density and weakened anode interface stability would need to be resolved. Novel electrode fabrication techniques that endeavor to overcome the critical issues originating from the use of sulfide SEs are subsequently introduced. The wet chemical coating process can take advantage of the know-how and facilities inherited from the more established lithium-ion batteries (LIBs). However, the dilemmatic matter of contention relating to the polarity mismatch among the slurry solvent, SE, and binder requires attention. Recent solutions to these problems involved the exploration of various emerging concepts, such as polarity switching during electrode fabrication, fine polarity tuning by accurate grafting, and infiltration of the electrode voids by a solution of the SE. The process of using a dry film with a fibrous binder has also raised interest, motivated by lowering the manufacturing cost, maintaining the environment, and boosting the volumetric energy density. Finally, optimization of the cell assembly and operation is reviewed. In particular, the application of external pressure to each unit cell has been universally adopted both in the fabrication step and during cell operation to realize high cell performance. The effect of pressurization is discussed by correlating it with the interface stability and robust interparticle contacts. Based on the significant progress that has been made thus far, we aim to encourage the battery community to engage their wide-ranging expertise toward advancing sulfide-based ASSBs that are practically feasible.

Multilayered Cell Sheets of Cardiac Reprogrammed Cells for the Evaluation of Drug Cytotoxicity.

BACKGROUND: Various cell-culture systems have been used to evaluate drug toxicity in vitro. However, factors that affect cytotoxicity outcomes in drug toxicity evaluation systems remain elusive. In this study, we used multilayered sheets of cardiac-mimetic cells, which were reprogrammed from human fibroblasts, to investigate the effects of the layer number on drug cytotoxicity outcomes. METHODS: Cell sheets of cardiac-mimetic cells were fabricated by reprogramming of human fibroblasts into cardiac-mimetic cells via coculture with cardiac cells and electric stimulation, as previously described. Double-layered cell sheets were prepared by stacking the cell sheets. The mono- and double-layered cell sheets were treated with 5-fluorouracil (5-FU), an anticancer drug, in vitro. Subsequently, apoptosis and lipid peroxidation were analyzed. Furthermore, effects of cardiac-mimetic cell density on cytotoxicity outcomes were evaluated by culturing cells in monolayer at various cell densities. RESULTS: The double-layered cell sheets exhibited lower cytotoxicity in terms of apoptosis and lipid peroxidation than the mono-layered sheets at the same 5-FU dose. In addition, the double-layered cell sheets showed better preservation of mitochondrial function and plasma membrane integrity than the monolayer sheets. The lower cytotoxicity outcomes in the double-layered cell sheets may be due to the higher intercellular interactions, as the cytotoxicity of 5-FU decreased with cell density in monolayer cultures of cardiac-mimetic cells. CONCLUSION: The layer number of cardiac-mimetic cell sheets affects drug cytotoxicity outcomes in drug toxicity tests. The in vitro cellular configuration that more closely mimics the in vivo configuration in the evaluation systems seems to exhibit lower cytotoxicity in response to drug.

Zn2+-Imidazole Coordination Crosslinks for Elastic Polymeric Binders in High-Capacity Silicon Electrodes.

Recent research has built a consensus that the binder plays a key role in the performance of high-capacity silicon anodes in lithium-ion batteries. These anodes necessitate the use of a binder to maintain the electrode integrity during the immense volume change of silicon during cycling. Here, Zn2+-imidazole coordination crosslinks that are formed to carboxymethyl cellulose backbones in situ during electrode fabrication are reported. The recoverable nature of Zn2+-imidazole coordination bonds and the flexibility of the poly(ethylene glycol) chains are jointly responsible for the high elasticity of the binder network. The high elasticity tightens interparticle contacts and sustains the electrode integrity, both of which are beneficial for long-term cyclability. These electrodes, with their commercial levels of areal capacities, exhibit superior cycle life in full-cells paired with LiNi0.8Co0.15Al0.05O2 cathodes. The present study underlines the importance of highly reversible metal ion-ligand coordination chemistries for binders intended for high capacity alloying-based electrodes.

Electronic effects of nano-confinement in functional organic and inorganic materials for optoelectronics.

When various optically and/or electronically active materials, such as conjugated polymers, perovskites, metals, and metal oxides, are confined at the nanoscale, they can exhibit unique nano-confined behavior that significantly differs from the behavior observed at the macroscale. Although controlled nano-confinement of functional materials can allow modulation of their electronic properties without the aid of any synthetic methodologies or additional chemical treatments, limited assembly approaches for nano-confinement and insufficient analytical tools for electronic characterization remain critical challenges in the development of novel optoelectronic materials and the investigation of their modulated properties. This review describes how the nano-confined features of organic and inorganic materials are related to the control and improvement of their optoelectronic properties. In particular, we focus on various assembly approaches for effective nano-confinement as well as methods for nano-electronic characterization. Then, we briefly present challenges and perspectives on the direction of nano-confinement in terms of the preparation of optoelectronic materials with desired functionalities. Furthermore, we believe that this review can provide a basis for developing and designing next-generation optoelectronics through nano-confinement.

New High Donor Electrolyte for Lithium-Sulfur Batteries.

The unparalleled theoretical specific energy of lithium-sulfur (Li-S) batteries has attracted considerable research interest from within the battery community. However, most of the long cycling results attained thus far relies on using a large amount of electrolyte in the cell, which adversely affects the specific energy of Li-S batteries. This shortcoming originates from the low solubility of polysulfides in the electrolyte. Here, 1,3-dimethyl-2-imidazolidinone (DMI) is reported as a new high donor electrolyte for Li-S batteries. The high solubility of polysulfides in DMI and its activation of a new reaction route, which engages the sulfur radical (S3 •- ), enables the efficient utilization of sulfur as reflected in the specific capacity of 1595 mAh g-1 under lean electrolyte conditions of 5 µLelectrolyte mgsulfur -1 . Moreover, the addition of LiNO3 stabilizes the lithium metal interface, thereby elevating the cycling performance to one of the highest known for high donor electrolytes in Li-S cells. These engineered high donor electrolytes are expected to advance Li-S batteries to cover a wide range of practical applications, particularly by incorporating established strategies to realize the reversibility of lithium metal electrodes.

One-step vapor-phase synthesis of transparent high refractive index sulfur-containing polymers.

High refractive index polymers (HRIPs) have recently emerged as an important class of materials for use in a variety of optoelectronic devices including image sensors, lithography, and light-emitting diodes. However, achieving polymers having refractive index exceeding 1.8 while maintaining full transparency in the visible range still remains formidably challenging. Here, we present a unique one-step vapor-phase process, termed sulfur chemical vapor deposition, to generate highly stable, ultrahigh refractive index (n > 1.9) polymers directly from elemental sulfur. The deposition process involved vapor-phase radical polymerization between elemental sulfur and vinyl monomers to provide polymer films with controlled thickness and sulfur content, along with the refractive index as high as 1.91. Notably, the HRIP thin film showed unprecedented optical transparency throughout the visible range, attributed to the absence of long polysulfide segments within the polymer, which will serve as a key component in a wide range of optical devices.

In Situ Deprotection of Polymeric Binders for Solution-Processible Sulfide-Based All-Solid-State Batteries.

Sulfide-based all-solid-state batteries (ASSBs) have been featured as promising alternatives to the current lithium-ion batteries (LIBs) mainly owing to their superior safety. Nevertheless, a solution-based scalable manufacturing scheme has not yet been established because of the incompatible polarity of the binder, solvent, and sulfide electrolyte during slurry preparation. This dilemma is overcome by subjecting the acrylate (co)polymeric binders to protection-deprotection chemistry. Protection by the tert-butyl group allows for homogeneous dispersion of the binder in the slurry based on a relatively less polar solvent, with subsequent heat-treatment during the drying process to cleave the tert-butyl group. This exposes the polar carboxylic acid groups, which are then able to engage in hydrogen bonding with the active cathode material, high-nickel layered oxide. Deprotection strengthens the electrode adhesion such that the strength equals that of commercial LIB electrodes, and the key electrochemical performance parameters are improved markedly in both half-cell and full-cell settings. The present study highlights the potential of sulfide-based ASSBs for scalable manufacturing and also provides insights that protection-deprotection chemistry can generally be used for various battery cells that suffer from polarity incompatibility among multiple electrode components.

Prevascularized, multiple-layered cell sheets of direct cardiac reprogrammed cells for cardiac repair.

We previously demonstrated that the efficiency of direct cardiac reprogramming from fibroblasts could be enhanced via mimicking of the in vivo cardiac microenvironment through coculture with cardiomyocytes and by providing electric cues. In the present study, we developed cell sheets using the direct cardiac reprogrammed cells and a nanothin, nanoporous poly(lactic-co-glycolic acid) membrane. Cell sheets were laid layer-by-layer and prevacularized with endothelial cells between the layers. These prevascularized, multilayered cell sheets were implanted on the epicardium of infarcted rat hearts, which led to an improvement in cardiac function and reduction in adverse cardiac remodeling post-myocardial infarction (MI). Thus, the in vivo mimicking direct cardiac reprogramming and prevascularization technique can enhance the efficiency of cell sheets in clinical applications and provide new opportunities to prevent heart failure following MI.

Reactive Polymer Targeting dsRNA as Universal Virus Detection Platform with Enhanced Sensitivity.

Reactive poly(pentafluorophenyl acrylate) (PPFPA)-grafted surfaces offer a versatile platform to immobilize biomolecules. Here, we utilize PPFPA-grafted surface and double-stranded RNA (dsRNA) recognizing J2 antibody to construct a universal virus detection platform with enhanced sensitivity. PPFPA on silicon substrates is prepared, and surface hydrophilicity is modulated by partial substitution of the pentafluorophenyl units with poly(ethylene glycol). Following dsRNA antibody immobilization, the prepared surfaces can distinguish long dsRNAs from single-stranded RNAs of the same length and short dsRNAs. As long dsRNAs are common byproducts of viral transcription/replication, these surfaces can detect the presence of different kinds of viruses without prior knowledge of their genomic sequences. To increase dsRNA detection sensitivity, a two-step method is devised where the captured dsRNAs are visualized with multiple fluorophore-tagged J2 antibodies. We show that the developed platform can differentiate foreign long dsRNAs from cellular dsRNAs and other biomolecules present in the cell lysate. Moreover, when tested against cells infected with hepatitis A or C viruses, both viruses are successfully detected using a single platform. Our study shows that the developed PPFPA platform immobilized with J2 antibody can serve as a primary diagnostic tool to determine the infection status for a wide range of viruses.

Pyrazine-Linked 2D Covalent Organic Frameworks as Coating Material for High-Nickel Layered Oxide Cathodes in Lithium-Ion Batteries.

The high specific capacity in excess of 200 mAh g-1 and low dependence on cobalt have enhanced the research interest on nickel-rich layered metal oxides as cathode materials for lithium-ion batteries for electric vehicles. Nonetheless, their poor cycle life and thermal stability, resulting from the occurrence of cation mixing between the transition-metal (TM) and lithium ions, are yet to be fully addressed to enable the widespread and reliable use of these materials. Here, we report a two-dimensional (2D) pyrazine-linked covalent organic framework (namely, Pyr-2D) as a coating material for nickel-rich layered cathodes to mitigate unwanted TM dissolution and interfacial reactions. The Pyr-2D coating layer, especially the 2D planar morphology and conjugated atomic configuration of Pyr-2D, protects the electrode surface effectively during cycling without sacrificing the electric conductivity of the host material. As a result, Pyr-2D-coated nickel-rich layered cathodes exhibited superior cyclability, rate performance, and thermal stability. The present study highlights the potential ability of 2D conjugated covalent organic frameworks to improve the key electrochemical properties of emerging battery electrodes.