Tracking Silent Hypersensitivity Reactions to Asparaginase during Leukemia Therapy Using Single-Chip Indirect Plasmonic and Fluorescence Immunosensing.

Microbial asparaginase is an essential component of chemotherapy for the treatment of childhood acute lymphoblastic leukemia (cALL). Silent hypersensitivity reactions to this microbial enzyme need to be monitored accurately during treatment to avoid adverse effects of the drug and its silent inactivation. Here, we present a dual-response anti-asparaginase sensor that combines indirect SPR and fluorescence on a single chip to perform ELISA-type immunosensing, and correlate measurements with classical ELISA. Analysis of serum samples from children undergoing cALL therapy revealed a clear correlation between single-chip indirect SPR/fluorescence immunosensing and ELISA used in clinical settings (R2 > 0.9). We also report that the portable SPR/fluorescence system had a better sensitivity than classical ELISA to detect antibodies in clinical samples with low antigenicity. This work demonstrates the reliability of dual sensing for monitoring clinically relevant antibody titers in clinical serum samples.

Characterization of a Novel Alkalophilic Lipase From Aneurinibacillus thermoaerophilus: Lid Heterogeneity and Assignment to Family I.5.

Recent investigations of Aneurinibacillus thermoaerophilus strains have allowed identification of a unique solvent tolerant lipase, distinct from known lipases. This work reports the expression and purification of this lipase (LipAT) and the first characterization of its structure and temperature and pH-dependent behaviour. LipAT has a secondary structural content compatible with the canonical lipase α/ß hydrolase fold, and is dimeric at neutral pH. The protein was folded from pH 5 to 10, and association into folded aggregates at pH 7 and 8 likely protected its secondary structures from thermal unfolding. The enzyme was active from 25 to 65 °C under neutral pH, but its maximal activity was detected at pH 10 and 45 °C. The ability of LipAT to recover from high temperature was investigated. Heating at 70 °C and pH 10 followed by cooling prevented the restoration of activity, while similar treatments performed at pH 8 (where folded aggregates may form) allowed recovery of 50% of the initial activity. In silico analyses revealed a high conservation (85% or more) for the main lipase signature sequences in LipAT despite an overall low residue identity (60% identity compared to family I.5 lipases). In contrast, the active site lid region in LipAT is very distinct showing only 25% amino acid sequence identity to other homologous lipases in this region. Comparison of lids among lipases from the I.5 family members and LipAT reveals that this region should be a primary target for elucidation, optimisation and prediction of structure-function relationships in lipases.

Impact of Salt Concentration and pH on Surface Charged Residues: Controlling Protein Association Pathways in Carboxylesterase EstGtA2.

BACKGROUND: Understanding the relationship between enzymatic stability and the amino acid sequence encoding carboxylesterases is of utmost importance. OBJECTIVES: Here we thoroughly characterized the behavior of the carboxylesterase EstGtA2 from Geobacillus thermodenitrificans during thermal denaturation at different pH with various salt concentrations. METHOD: EstGtA2 was characterized by circular dichroism regarding conformation and thermal stability, by dynamic light scattering for detection of association/aggregation, by enzymatic assays for activity and by monitoring the impact of heat treatments on activity. RESULTS: Our investigation revealed a particular dependence between aggregation/association and preservation of secondary structures upon heating in EstGtA2. At pH 7, 8 and 9, depending on salt concentration, a folded but non-native associated state characterised by an apparent particle size of 300 nm resisted secondary structure unfolding up to 95°C. CONCLUSION: The paths leading to various aggregative states were found to be controlled by pH (depending on proximity to pI) and to a lesser extent, ionic strength, suggesting that ionic interactions at the surface of the protein are responsible for behavior of EstGtA2. The various paths available to EstGtA2 could be important for protection of Geobacillus termodenitrificans when exposed to heat stress. The understanding and/or control of these paths would allow for optimal use of EstGtA2 in industrial processes.

Development of Escherichia coli Asparaginase II for Immunosensing: A Trade-Off between Receptor Density and Sensing Efficiency.

The clinical success of Escherichia colil-asparaginase II (EcAII) as a front line chemotherapeutic agent for acute lymphoblastic leukemia (ALL) is often compromised because of its silent inactivation by neutralizing antibodies. Timely detection of silent immune response can rely on immobilizing EcAII, to capture and detect anti-EcAII antibodies. Having recently reported the use of a portable surface plasmon resonance (SPR) sensing device to detect anti-EcAII antibodies in undiluted serum from children undergoing therapy for ALL (Aubé et al., ACS Sensors2016, 1 (11), 1358-1365), here we investigate the impact of the quaternary structure and the mode of immobilization of EcAII onto low-fouling SPR sensor chips on the sensitivity and reproducibility of immunosensing. We show that the native tetrameric structure of EcAII, while being essential for activity, is not required for antibody recognition because monomeric EcAII is equally antigenic. By modulating the mode of immobilization, we observed that low-density surface coverage obtained upon covalent immobilization allowed each tetrameric EcAII to bind up to two antibody molecules, whereas high-density surface coverage arising from metal chelation by N- or C-terminal histidine-tag reduced the sensing efficiency to less than one antibody molecule per tetramer. Nonetheless, immobilization of EcAII by metal chelation procured up to 10-fold greater surface coverage, thus resulting in increased SPR sensitivity and allowing reliable detection of lower analyte concentrations. Importantly, only metal chelation achieved highly reproducible immobilization of EcAII, providing the sensing reproducibility that is required for plasmonic sensing in clinical samples. This report sheds light on the impact of multiple factors that need to be considered to optimize the practical applications of plasmonic sensors.

Influence of the Debye length on the interaction of a small molecule-modified Au nanoparticle with a surface-bound bioreceptor.

We report that a shorter Debye length and, as a consequence, decreased colloidal stability are required for the molecular interaction of folic acid-modified Au nanoparticles (Au NPs) to occur on a surface-bound receptor, human dihydrofolate reductase (hDHFR). The interaction measured using surface plasmon resonance (SPR) sensing was optimal in a phosphate buffer at pH 6 and ionic strength exceeding 300 mM. Under these conditions, the aggregation constant of the Au NPs was approximately 10(4) M(-1) s(-1) and the Debye length was below 1 nm, on the same length scale as the size of the folate anion (approximately 0.8 nm). Longer Debye lengths led to poorer SPR responses, revealing a reduced affinity of the folic acid-modified Au NPs for hDHFR. While high colloidal stability of Au NPs is desired in most applications, these conditions may hinder molecular interactions due to Debye lengths exceeding the size of the ligand and thus preventing close interactions with the surface-bound molecular receptor.

Role of key salt bridges in thermostability of G. thermodenitrificans EstGtA2: distinctive patterns within the new bacterial lipolytic enzyme subfamily XIII.2 [corrected].

Bacterial lipolytic enzymes were originally classified into eight different families defined by Arpigny and Jaeger (families I-VIII). Recently, the discovery of new lipolytic enzymes allowed for extending the original classification to fourteen families (I-XIV). We previously reported that G. thermodenitrificans EstGtA2 (access no. AEN92268) belonged to a novel group of bacterial lipolytic enzymes. Here we propose a 15(th) family (family XV) and suggest criteria for the assignation of protein sequences to the N' subfamily. Five selected salt bridges, hallmarks of the N' subfamily (E3/R54, E12/R37, E66/R140, D124/K178 and D205/R220) were disrupted in EstGtA2 using a combinatorial alanine-scanning approach. A set of 14 (R/K→A) mutants was produced, including five single, three double, three triple and three quadruple mutants. Despite a high tolerance to non-conservative mutations for folding, all the alanine substitutions were destabilizing (decreasing T m by 5 to 14°C). A particular combination of four substitutions exceeded this tolerance and prevents the correct folding of EstGtA2, leading to enzyme inactivation. Although other mutants remain active at low temperatures, the accumulation of more than two mutations had a dramatic impact on EstGtA2 activity at high temperatures suggesting an important role of these conserved salt bridge-forming residues in thermostability of lipolytic enzymes from the N' subfamily. We also identified a particular interloop salt bridge in EstGtA2 (D194/H222), located at position i -2 and i -4 residues from the catalytic Asp and His respectively which is conserved in other related bacterial lipolytic enzymes (families IV and XIII) with high tolerance to mutations and charge reversal. We investigated the role of residue identity at position 222 in controlling stability-pH dependence in EstGtA2. The introduction of a His to Arg mutation led to increase thermostability under alkaline pH. Our results suggest primary targets for optimization of EstGtA2 for specific biotechnological purposes.

Dieselzymes: development of a stable and methanol tolerant lipase for biodiesel production by directed evolution.

BACKGROUND: Biodiesels are methyl esters of fatty acids that are usually produced by base catalyzed transesterification of triacylglyerol with methanol. Some lipase enzymes are effective catalysts for biodiesel synthesis and have many potential advantages over traditional base or acid catalyzed transesterification. Natural lipases are often rapidly inactivated by the high methanol concentrations used for biodiesel synthesis, however, limiting their practical use. The lipase from Proteus mirabilis is a particularly promising catalyst for biodiesel synthesis as it produces high yields of methyl esters even in the presence of large amounts of water and expresses very well in Escherichia coli. However, since the Proteus mirabilis lipase is only moderately stable and methanol tolerant, these properties need to be improved before the enzyme can be used industrially. RESULTS: We employed directed evolution, resulting in a Proteus mirabilis lipase variant with 13 mutations, which we call Dieselzyme 4. Dieselzyme 4 has greatly improved thermal stability, with a 30-fold increase in the half-inactivation time at 50°C relative to the wild-type enzyme. The evolved enzyme also has dramatically increased methanol tolerance, showing a 50-fold longer half-inactivation time in 50% aqueous methanol. The immobilized Dieselzyme 4 enzyme retains the ability to synthesize biodiesel and has improved longevity over wild-type or the industrially used Brukholderia cepacia lipase during many cycles of biodiesel synthesis. A crystal structure of Dieselzyme 4 reveals additional hydrogen bonds and salt bridges in Dieselzyme 4 compared to the wild-type enzyme, suggesting that polar interactions may become particularly stabilizing in the reduced dielectric environment of the oil and methanol mixture used for biodiesel synthesis. CONCLUSIONS: Directed evolution was used to produce a stable lipase, Dieselzyme 4, which could be immobilized and re-used for biodiesel synthesis. Dieselzyme 4 outperforms the industrially used lipase from Burkholderia cepacia and provides a platform for still further evolution of desirable biodiesel production properties.

N-terminal purification tag alters thermal stability of the carboxylesterase EstGtA2 from G. thermodenitrificans by impairing reversibility of thermal unfolding.

The novel thermostable carboxylesterase EstGtA2 from G. thermodenitrificans (accession no. AEN92268) was functionally expressed and purified using an N-terminal fusion tag peptide. We recently reported general properties of the recombinant enzyme. Here we report preliminary data on thermal stability of EstGtA2 and of its tagged form. Conformational stability was investigated using circular dichroism and correlated with residual activity measurements using a colorimetric assay. The tag peptide had no considerable impact on the apparent melting temperature: T(m) value = 64.8°C (tagged) and 65.7°C (cleaved) at pH 8. After thermal unfolding, the tag-free enzyme rapidly recovered initial activity at 25°C (1.2 Umg(-1)), which was corroborated by substantial refolding (83%) as determined by far-UV CD transitions. However, after thermal unfolding, the purification tag drastically decreased specific activity at 25°C (0.07 Umg(-1)). This was corroborated by the absence of refolding transition. Although the purification tag has no undesirable impact on activity before thermal unfolding as well as on Tm, it drastically hinders EstGtA2 refolding resulting in a major loss of thermal stability.

Identification of thermophilic bacterial strains producing thermotolerant hydrolytic enzymes from manure compost.

Ten thermophilic bacterial strains were isolated from manure compost. Phylogenetic analysis based on 16S rRNA genes and biochemical characterization allowed identification of four different species belonging to four genera: Geobacillus thermodenitrificans, Bacillus smithii, Ureibacillus suwonensis and Aneurinibacillus thermoaerophilus. PCR-RFLP profiles of the 16S-ITS-23S rRNA region allowed us to distinguish two subgroups among the G. thermodenitrificans isolates. Isolates were screened for thermotolerant hydrolytic activities (60-65°C). Thermotolerant lipolytic activities were detected for G. thermodenitrificans, A. thermoaerophilus and B. smithii. Thermotolerant protease, α-amylase and xylanase activities were also observed in the G. thermodenitrificans group. These species represent a source of potential novel thermostable enzymes for industrial applications.

A novel thermostable carboxylesterase from Geobacillus thermodenitrificans: evidence for a new carboxylesterase family.

A novel gene encoding an esterase from Geobacillus thermodenitrificans strain CMB-A2 was cloned, sequenced and functionally expressed in Escherichia coli M15. Sequence analysis revealed an open reading frame of 747 bp corresponding to a polypeptide of 249 amino acid residues (named EstGtA2). After purification, a specific activity of 2.58 U mg(-1) was detected using p-NP caprylate (C8) at 50 degrees C and pH 8.0 (optimal conditions). The enzyme catalyses the hydrolysis of triglycerides (tributyrin) and a variety of p-nitrophenyl esters with different fatty acyl chain length (C4-C16). The enzyme has potential for various industrial applications since it is characterized by its activity under a wide range of pH, from 25 to 65 degrees C. Using Geobacillus stearothermophilus Est30 esterase structure as template, a model of EstGtA2 was built using ESyPred3D. Analysis of this structural model allowed identifying putative sequence features that control EstGtA2 enzymatic properties. Based on sequence properties, multiple sequence comparisons and phylogenetic analyses, this enzyme appears to belong to a new family of carboxylesterases.

Study on the interaction of cationic lipids with bovine serum albumin.

There are several lipid binding sites on serum albumins. The aim of this study was to examine the binding of bovine serum albumin (BSA) to cholesterol (Chol), 1,2-dioleoyl-3-(trimethylammonium)propane (DOTAP), (dioctadecyldimethyl)ammonium bromide (DDAB), and dioleoylphosphatidylethanolamine (DOPE), at physiological conditions, using constant protein concentration and various lipid contents. Fourier transform infrared (FTIR), circular dichroism (CD) and fluorescence spectroscopic methods were used to analyze the lipid binding mode, the binding constant, and the effects of lipid complexation on BSA stability and conformation. Structural analysis showed that lipids bind BSA via both hydrophilic and hydrophobic contacts with overall binding constants of K(Chol) = (1.12 +/- 0.40) x 10(3) M(-1), K(DDAB) = (1.50 +/- 0.50) x 10(3) M(-1), K(DOTAP) = (2.45 +/- 0.80) x 10(3) M(-1), and K(DOPE) = (1.35 +/- 0.60) x 10(3) M(-1). The numbers of bound lipid (n) were 1.1 (cholesterol), 1.28 (DDAB), 1.02 (DOPE), and 1.21 (DOTAP) in these lipid-BSA complexes. DDAB and DOTAP induced major alterations of BSA conformation, causing a partial protein unfolding, while cholesterol and DOPE stabilized protein secondary structure.

Structural characterization of cationic lipid-tRNA complexes.

Despite considerable interest and investigations on cationic lipid-DNA complexes, reports on lipid-RNA interaction are very limited. In contrast to lipid-DNA complexes where lipid binding induces partial B to A and B to C conformational changes, lipid-tRNA complexation preserves tRNA folded state. This study is the first attempt to investigate the binding of cationic lipid with transfer RNA and the effect of lipid complexation on tRNA aggregation and condensation. We examine the interaction of tRNA with cholesterol (Chol), 1,2-dioleoyl-3-trimethylammonium-propane (DOTAP), dioctadecyldimethylammoniumbromide (DDAB) and dioleoylphosphatidylethanolamine (DOPE), at physiological condition, using constant tRNA concentration and various lipid contents. FTIR, UV-visible, CD spectroscopic methods and atomic force microscopy (AFM) were used to analyze lipid binding site, the binding constant and the effects of lipid interaction on tRNA stability, conformation and condensation. Structural analysis showed lipid-tRNA interactions with G-C and A-U base pairs as well as the backbone phosphate group with overall binding constants of K(Chol) = 5.94 (+/- 0.8) x 10(4) M(-1), K(DDAB) = 8.33 (+/- 0.90) x 10(5) M(-1), K(DOTAP) = 1.05 (+/- 0.30) x 10(5) M(-1) and K(DOPE) = 2.75 (+/- 0.50) x 10(4) M(-1). The order of stability of lipid-tRNA complexation is DDAB > DOTAP > Chol > DOPE. Hydrophobic interactions between lipid aliphatic tails and tRNA were observed. RNA remains in A-family structure, while biopolymer aggregation and condensation occurred at high lipid concentrations.