Evaluation of conventional and point-of-care real-time RT-PCR tests for the detection of SARS-CoV-2 through a pooled testing strategy.

BACKGROUND: The rapid identification and isolation of individuals infected with SARS-CoV-2 are fundamental countermeasures for the efficient control of the COVID-19 pandemic, which has affected millions of people around the world. Real-time RT-PCR is one of the most commonly applied reference methods for virus detection, and the use of pooled testing has been proposed as an effective way to increase the throughput of routine diagnostic tests. However, the clinical applicability of different types of real-time RT-PCR tests in a given group size remains inconclusive due to inconsistent regional disease prevalence and test demands. METHODS: In this study, the performance of one dual-target conventional and two point-of-care real-time RT-PCR tests in a 5-specimen pooled testing strategy for the detection of SARS-COV-2 was evaluated. RESULTS: We demonstrated the proof of concept that all of these real-time RT-PCR tests could feasibly detect SARS-CoV-2 from nasopharyngeal and oropharyngeal specimens that contain viral RNA loads in the range of 3.48 × 105 to 3.42 × 102 copies/ml through pooled testing in a group size of 5 with overall positive percent agreement (pooling vs. individual testing) ranging from 100% to 93.75%. Furthermore, the two POC real-time RT-PCR tests exhibited comparable sensitivity to that of the dual-target conventional one when clinical specimens were tested individually. CONCLUSION: Our findings support the feasibility of using real-time RT-PCR tests developed as a variety of platforms in routine laboratory detection of suspected COVID-19 cases through a pooled testing strategy that is beneficial to increasing the daily diagnostic capacity.

Characters related to higher starch accumulation in cassava storage roots.

Cassava (Manihot esculenta) is valued mainly for high content starch in its roots. Our understanding of mechanisms promoting high starch accumulation in the roots is, however, still very limited. Two field-grown cassava cultivars, Huanan 124(H124) with low root starch and Fuxuan 01(F01) with high root starch, were characterised comparatively at four main growth stages. Changes in key sugars in the leaves, stems and roots seemed not to be strongly associated with the final amount of starch accumulated in the roots. However, when compared with H124, F01 exhibited a more compact arrangement of xylem vascular bundles in the leaf axils, much less callose around the phloem sieve plates in the stems, higher starch synthesis-related enzymatic activity but lower amylase activity in the roots, more significantly up-regulated expression of related genes, and a much higher stem flow rate (SFR). In conclusion, higher starch accumulation in the roots results from the concurrent effects of powerful stem transport capacity highlighted by higher SFR, high starch synthesis but low starch degradation in the roots, and high expression of sugar transporter genes in the stems. A model of high starch accumulation in cassava roots was therefore proposed and discussed.

Precise determination of seawater calcium using isotope dilution inductively coupled plasma mass spectrometry.

We describe a method for rapid, precise and accurate determination of calcium ion (Ca(2+)) concentration in seawater using isotope dilution inductively coupled plasma mass spectrometry (ID-ICP-MS). A 10 µL aliquot of seawater was spiked with an appropriate (43)Ca enriched solution for (44)Ca/(43)Ca ID-ICP-MS analyses, using an Element XR (Thermo Fisher Scientific), operated at low resolution in E-scan acquisition mode. A standard-sample bracketing technique was applied to correct for potential mass discrimination and ratio drift at every 5 samples. A precision of better than 0.05% for within-run and 0.10% for duplicate measurements of the IAPSO seawater standard was achieved using 10 µL solutions with a measuring time less than 3 minutes. Depth profiles of seawater samples collected from the Arctic Ocean basin were processed and compared with results obtained by the classic ethylene glycol tetra-acetic acid (EGTA) titration. Our new ID-ICP-MS data agreed closely with the conventional EGTA data, with the latter consistently displaying 1.5% excess Ca(2+) values, possibly due to a contribution of interference from Mg(2+) and Sr(2+) in the EGTA titration. The newly obtained Sr/Ca profiles reveal sensitive water mass mixing in the upper oceanic column to reflect ice melting in the Arctic region. This novel technique provides a tool for seawater Ca(2+) determination with small sample size, high throughput, excellent internal precision and external reproducibility.

[Comfort of crew and passengers and atmospheric pressure, noise, wind speed in high-speed train of Shijiazhuang-Taiyuan passenger dedicated line].

OBJECTIVE: To explore the crew and passengers' comfort on the Shijiazhuang-Taiyuan passenger dedicated line and physical factors, such as air pressure, noise, wind speed. METHODS: Comfort investigation of all the crew (n = 244) and passengers (n = 377) on the Shijiazhuang-Taiyuan passenger dedicated line at speed of 250 km/h and 200 km/h and the detection of the air pressure, noise and wind speed were performed in 2011. RESULTS: Significantly higher ratio of comfortable feeling, lower ratio of seriously discomfortable feeling were observed in crew and passengers at 200 km/h compared with those at 250 km/h (P < 0.05), as well as rapid disappearance of discomfortable feeling in crew (P < 0.05) and significantly higher ratio of lightly discomfortable feeling and lower ratios of tinnitus and eardrum discomfort induced by air pressure and noise in passengers at 200 km/h. No significant difference was observed in ear discomfort induced by air pressure and noise among crew, and the duration of disappearance of discomfortable feeling among passengers between 200 km/h and 250 km/h. The noise in carriages exceeded the related standard when the high-speed train passing through the tunnels. CONCLUSION: The individuals feel more comfortable at 200 km/h than 250 km/h in this line., which may be related with rapid variation of wind speed and noise when the train passes through the tunnels with high speed.

Application of cDNA array for studying the gene expression profile of mature appressoria of Magnaporthe grisea.

Appressorium is an infection structure of the phytopathogenic fungus Magnaporthe grisea. Analysis of gene expression profiles of appressorium development provides insight into the molecular basis of pathogenicity and control of this fungal plant disease. A cDNA array representing 2927 unique genes based on a large EST (expressed sequence tag) database of M. grisea strain Y34 was constructed and used to profile the gene expression patterns at mycelium and appressorium maturation stages. Compared with mycelia, 55 up-regulated and 22 down-regulated genes were identified in mature appressoria. Among 77 genes, 16 genes showed no similarity to the genome sequences of M. grisea. A novel homologue of peptidyl-prolyl cis-trans isomerase was found to be expressed at low-level in mature appressoria of M. grisea. The results indicated that the genes such as pyruvate carboxylase, phospholipid metabolism-related protein and glyceraldehyde 3-phosphate dehydrogenase involved in gluconeogenesis, lipid metabolism and glycolysis, showed differential expression in mature appressoria. Furthermore, genes such as PTH11, beta subunit of G protein and SGT1 involved in cell signalling, were expressed differentially in mature appressoria. Northern blot analysis was used to confirm the cDNA array results.

[The gene wxcA of Xanthomonas campestris pv. campestris 8004 strain involved in EPS yield].

Xanthomonas campestris pv. campestris (Xcc), the pathogenic agent of black rot disease in cruciferous plants, produces large amount of extracellular polysaccharide (EPS), which has found wide applications in industry. For the great commercial value of the xanthan gum, many of the genes involved in EPS biosynthesis have been cloned and the mechanism of EPS biosynthesis also has been studied. In order to clone genes involved in EPS biosynthesis, Xcc wild-type strain 8004 was mutagenized with transposon Tn5 gusA5, and a number of EPS-defective mutants were isolated in our previous work. The Tn5 gusA5 inserted sites of these mutants were located by using thermal asymmetric interlaced PCR, and results showed that two EPS-defective mutants were insertion mutants of the gene wxcA which involved in lipopolysaccharide (LPS) biosynthesis. The gene wxcA involved in lipopolysaccharide biosynthesis but dose not extracellular polysaccharide in others' report. wxcA::Tn5 gusA5 mutant 021C12, the polar mutant, was complemented with recombinant plasmid pLATC8570 harboring an intact wxcA gene in this work, but the yield of EPS of the wxcA::Tn5 gusA5 mutant was not restored. In order to identify the function of wxcA gene of Xcc 8004 strain, the gene wxcA was deleted by gene replacement strategy, and the no-polar mutant of wxcA was obtained. DeltawxcA mutant strain, named Xcc 8570, was confirmed by using both PCR and southern analysis. Beside the LPS biosynthesis of deltawxcA mutant was affected, The EPS yield of deltawxcA mutant strain reduced by 50% as compared with the wild-type strain 8004. DeltawxcA mutant could be complemented in trans with the intact wxcA gene, and the EPS yield of the mutant was restored. The combined data showed that wxcA gene not only involved in LPS biosynthesis but also EPS yield in Xcc 8004 strain.

[Identification and cloning of a novel gene involved in EPS biosynthesis of Xanthomonas campestris pv. campestris].

Xanthomonas campestris pv. campestris ( Xcc), causative agent of the black rot disease of cruciferous crops worldwide, produces large amount of extracellular polysaccharide( EPS), which has found wide applications in industry. In order to clone genes involved in EPS biosynthesis, Xcc wild-type strain 8004 was mutagenized with transposon Tn5gus A5, and a number of EPS-defective mutants were isolated. The Tn5gusA5 insertion sites in the mutants were analyzed by using thermal asymmetric interlaced PCR(TAIL-PCR), and the corresponding genes were identified by homology blast to the completely sequenced genome of Xcc 8004 strain. A novel gene, waxE, identified from the EPS-defective mutant 151D09, was found to be disrupted by the insertion of Tn5gusA5 in the open reading frame(ORF) with genome coordinates 4478998bp to 4479819bp.This gene showed 52% similarity to the kdtX gene of Serratia marcescens and 50% to the waaE of Klebsiella pneumoniae at amino acid level, with characteristics of glycostransferase 2 family domain. In order to identify the function of waxE gene, waxE gene deletion mutant of Xcc 8004 was constructed by gene replacement strategy in which waxE gene of genome was replaced by kanamycin resistant gene kan. The waxE gene deletion mutant strain, named Xcc 8570, was confirmed by both PCR and southern analysis. The growth rate of the deletion mutant 8570 in rich medium was not affected, but the EPS yield reduced by 35% as compared with the wildtype strain 8004. The deletion mutant could be completmented in trans with plasmid pLATC8976 harboring an intact waxE gene, and the EPS yield of the mutant was restored. The combined data showed that waxE gene involved in EPS biosynthesis in Xcc.