Plasma-Driven Selenization for Electrical Property Enhancement in Janus 2D Materials.

The recent emergence of Janus 2D materials like SnSSe, derived from SnS2, reveals unique electrical and optical features, such as asymmetrical electronic structure, enhanced carrier mobility, and tunable bandgap. Previous theoretical studies have discuss the electronic properties of Janus SnSSe, but experimental evidence is limited. This study presents a two-step method for synthesizing Janus SnSSe, involving hydrogen plasma treatment and in situ selenization. Optimized conditions (38 W, 1.5 min, 250 °C) are determined using Raman spectroscopy and AFM analysis. XPS confirmed SnSSe's elemental composition, while KPFM reveals a significant reduction in the work function (from 5.26 down to 5.14 eV) for the first time, indicating asymmetrically induced n-type doping. Finally, field-effect transistors (FETs) derived from SnSSe exhibited significantly enhanced mobility and on-current, as well as n-type doping, compared to SnS2-based FETs. These findings lay a crucial foundation for developing high-performance 2D electronic and optoelectronic devices.

Single-Gate In-Transistor Readout of Current Superposition and Collapse Utilizing Quantum Tunneling and Ferroelectric Switching.

In nanostructure assemblies, the superposition of current paths forms microscopic electric circuits, and different circuit networks produce varying results, particularly when utilized as transistor channels for computing applications. However, the intricate nature of assembly networks and the winding paths of commensurate currents hinder standard circuit modeling. Inspired by the quantum collapse of superposition states for information decoding in quantum circuits, the implementation of analogous current path collapse to facilitate the detection of microscopic circuits by modifying their network topology is explored. Here, the superposition and collapse of current paths in gate-all-around polysilicon nanosheet arrays are demonstrated to enrich the computational resources within transistors by engineering the channel length and quantity. Switching the ferroelectric polarization of Hf0.5 Zr0.5 O2 gate dielectric, which drives these transistors out-of-equilibrium, decodes the output polymorphism through circuit topological modifications. Furthermore, a protocol for the single-electron readout of ferroelectric polarization is presented with tailoring the channel coherence. The introduction of lateral path superposition results into intriguing metal-to-insulator transitions due to transient behavior of ferroelectric switching. This ability to adjust the current networks within transistors and their interaction with ferroelectric polarization in polycrystalline nanostructures lays the groundwork for generating diverse current characteristics as potential physical databases for optimization-based computing.

Diffused Beam Energy to Dope van der Waals Electronics and Boost Their Contact Barrier Lowering.

Contact engineering of two-dimensional semiconductors is a central issue for performance improvement of micro-/nanodevices based on these materials. Unfortunately, the various methods proposed to improve the Schottky barrier height normally require the use of high temperatures, chemical dopants, or complex processes. This work demonstrates that diffused electron beam energy (DEBE) treatment can simultaneously reduce the Schottky barrier height and enable the direct writing of electrical circuitry on van der Waals semiconductors. The electron beam energy projected into the region outside the electrode diffuses into the main channel, producing selective-area n-type doping in a layered MoTe2 (or MoS2) field-effect transistor. As a result, the Schottky barrier height at the interface between the electrode and the DEBE-treated MoTe2 channel is as low as 12 meV. Additionally, because selective-area doping is possible, DEBE can allow the formation of both n- and p-type doped channels within the same atomic plane, which enables the creation of a nonvolatile and homogeneous MoTe2 p-n rectifier with an ideality factor of 1.1 and a rectification ratio of 1.3 × 103. These results indicate that the DEBE method is a simple, efficient, mask-free, and chemical dopant-free approach to selective-area doping for the development of van der Waals electronics with excellent device performances.

Reversible Charge-Polarity Control for Multioperation-Mode Transistors Based on van der Waals Heterostructures.

Van der Waals (vdW) heterostructures-in which layered materials are purposely selected to assemble with each other-allow unusual properties and different phenomena to be combined and multifunctional electronics to be created, opening a new chapter for the spread of internet-of-things applications. Here, an O2 -ultrasensitive MoTe2 material and an O2 -insensitive SnS2 material are integrated to form a vdW heterostructure, allowing the realization of charge-polarity control for multioperation-mode transistors through a simple and effective rapid thermal annealing strategy under dry-air and vacuum conditions. The charge-polarity control (i.e., doping and de-doping processes), which arises owing to the interaction between O2 adsorption/desorption and tellurium defects at the MoTe2 surface, means that the MoTe2 /SnS2 heterostructure transistors can reversibly change between unipolar, ambipolar, and anti-ambipolar transfer characteristics. Based on the dynamic control of the charge-polarity properties, an inverter, output polarity controllable amplifier, p-n diode, and ternary-state logics (NMIN and NMAX gates) are demonstrated, which inspire the development of reversibly multifunctional devices and indicates the potential of 2D materials.

Facile and Reversible Carrier-Type Manipulation of Layered MoTe2 Toward Long-Term Stable Electronics.

Flexible manipulation of the carrier transport behaviors in two-dimensional materials determines their values of practical application in logic circuits. Here, we demonstrated the carrier-type manipulation in field-effect transistors (FETs) containing α-phase molybdenum ditelluride (MoTe2) by a rapid thermal annealing (RTA) process in dry air for hole-dominated and electron-beam (EB) treatment for electron-dominated FETs. EB treatment induced a distinct shift of the transfer curve by around 135 V compared with that of the FET-processed RTA treatment, indicating that the carrier density of the EB-treated FET was enhanced by about 1 order of magnitude. X-ray photoelectron spectroscopy analysis revealed that the atomic ratio of Te decreased from 66.4 to 60.8% in the MoTe2 channel after EB treatment. The Fermi level is pinned near the new energy level resulting from the Te vacancies produced by the EB process, leading to the electron-dominant effect of the MoTe2 FET. The electron-dominated MoTe2 FET showed excellent stability for more than 700 days. Thus, we not only realized the reversible modulation of carrier-type in layered MoTe2 FETs but also demonstrated MoTe2 channels with desirable performance, including long-term stability.

Oxygen-Sensitive Layered MoTe2 Channels for Environmental Detection.

The oxygen (O2)-dependent resistance change of multilayered molybdenum ditelluride (MoTe2) channels was characterized. A variation of the channel resistance could reproducibly determine relative O2 content (denoted as the O2 index). We found that Joule heating in a layered MoTe2 field-effect transistor caused the O2 index to decrease drastically from 100 to 12.1% in back gate modulation. Furthermore, Joule heating caused effective O2 desorption from the MoTe2 surface and repeatable O2 detection by multilayered MoTe2 channels was realized. This work not only explored the influence of O2 on the electrical properties of multilayered MoTe2 channels but also revealed that MoTe2 channels are promising for sensing O2 in an environmental condition.