Nanoparticle-mediated systemic delivery of siRNA for treatment of cancers and viral infections.

RNA interference (RNAi) is an endogenous post-transcriptional gene regulatory mechanism, where non-coding, double-stranded RNA molecules interfere with the expression of certain genes in order to silence it. Since its discovery, this phenomenon has evolved as powerful technology to diagnose and treat diseases at cellular and molecular levels. With a lot of attention, short interfering RNA (siRNA) therapeutics has brought a great hope for treatment of various undruggable diseases, including genetic diseases, cancer, and resistant viral infections. However, the challenge of their systemic delivery and on how they are integrated to exhibit the desired properties and functions remains a key bottleneck for realizing its full potential. Nanoparticles are currently well known to exhibit a number of unique properties that could be strategically tailored into new advanced siRNA delivery systems. This review summarizes the various nanoparticulate systems developed so far in the literature for systemic delivery of siRNA, which include silica and silicon-based nanoparticles, metal and metal oxides nanoparticles, carbon nanotubes, graphene, dendrimers, polymers, cyclodextrins, lipids, hydrogels, and semiconductor nanocrystals. Challenges and barriers to the delivery of siRNA and the role of different nanoparticles to surmount these challenges are also included in the review.

Proteomic analysis of cellular response induced by multi-walled carbon nanotubes exposure in A549 cells.

The wide application of multi-walled carbon nanotubes (MWCNT) has raised serious concerns about their safety on human health and the environment. However, the potential harmful effects of MWCNT remain unclear and contradictory. To clarify the potentially toxic effects of MWCNT and to elucidate the associated underlying mechanisms, the effects of MWCNT on human lung adenocarcinoma A549 cells were examined at both the cellular and the protein level. Cytotoxicity and genotoxicity were examined, followed by a proteomic analysis (2-DE coupled with LC-MS/MS) of the cellular response to MWCNT. Our results demonstrate that MWCNT induces cytotoxicity in A549 cells only at relatively high concentrations and longer exposure time. Within a relatively low dosage range (30 µg/ml) and short time period (24 h), MWCNT treatment does not induce significant cytotoxicity, cell cycle changes, apoptosis, or DNA damage. However, at these low doses and times, MWCNT treatment causes significant changes in protein expression. A total of 106 proteins show altered expression at various time points and dosages, and of these, 52 proteins were further identified by MS. Identified proteins are involved in several cellular processes including proliferation, stress, and cellular skeleton organization. In particular, MWCNT treatment causes increases in actin expression. This increase has the potential to contribute to increased migration capacity and may be mediated by reactive oxygen species (ROS).

Quantum dot-related genotoxicity perturbation can be attenuated by PEG encapsulation.

Nanomaterial-biosystem interaction is emerging as a major concern hindering wide adoption of nanomaterials. Using quantum dots (Qdots) of different sizes (Qdot-440nm and Qdot-680nm) as a model system, we studied the effects of polyethylene glycol (PEG) thin-layer surface modification in attenuating Qdot-related cytotoxicity, genotoxicity perturbation and oxidative stress in a cellular system. We found that uncoated Qdots (U-Qdots) made of core/shell CdSe/ZnS could indeed induce cytotoxic effects, including the inhibition of cell growth. Also, both the neutral comet assay and γH2AX foci formation showed that U-Qdots caused significant DNA damage in a time- and dose-dependent manner. In contrast, results from cytotoxicity analysis and γH2AX generation indicate minimal impact on cells after exposure to PEG-coated Qdots. This lack of observed toxic effects from PEG-coated Qdots may be due to the fact that PEG-coating can inhibit ROS generation induced by U-Qdots. Based on these observations, we conclude that the genotoxicity of Qdots could be significantly decreased following proper surface modification, such as PEG encapsulation. In addition, PEG encapsulation may also serve as a general method to attenuate nanotoxicity for other nanoparticles.

Hybrid nanocluster plasmonic resonator for immunological detection of hepatitis B virus.

Approximately 88% of the world population lives in regions with intermediate to high incidence of Hepatitis B virus (HBV), yet current serological and DNA-based detection methods have limited sensitivity and convenience. Here, we describe a preassembled plasmonic resonance nanocluster for HBV detection. The gold nanoparticle acceptors (AuNPs), with HBV surface antigen (HBsAg) epitope, and quantum dot (QD) donors with Fab antibody, are assembled into an immuno-mediated 3D-oriented complex with enhanced energy transfer and fluorescence quenching. The coherent plasmonic resonance between Au and QD nanoparticles is exploited to achieve improved donor-acceptor resonance within the nanocluster, which in the presence of HBV viral particles is disassembled in a highly specific manner. The nanocluster provides high detection specificity and sensitivity of HBV, with a sensitivity limit down to 1-100 viral particles per microliter and to attomolar levels of HBsAg. This general platform could be used to establish multiplex diagnostic assays for a variety of other microbial pathogens.

Fabrication of quantum dots-encoded microbeads with a simple capillary fluidic device and their application for biomolecule detection.

Monodispersed quantum dots (QDs)-encoded polymer microbeads were generated using a simple capillary fluidic device (CFD). The polymer and QDs solution was emulsified into monodispersed microdroplets by the CFD and obtained droplets were solidified via solvent evaporation. Polymer microbeads can be fabricated in a range of different sizes through changing the flow rates of the two immiscible phases, and have a highly narrow size distribution and uniform shape. QDs-encoding capacity of the microbeads was investigated through adjusting the concentrations and ratios of QDs in the polymer solution. Mono-color encoded microbeads with five intensities and a dual-color QDs-encoded 5×5 microbeads array were obtained, and the spectral profiles of the microbeads were examined by a fluorescent microscope coupled with a spectral imaging system. QDs-tagged microbeads prepared with this method were more stable than the porous beads swollen with QDs in the buffer with various pH and crosslinking chemicals. Finally, the application of such microbeads for biomolecule detection was demonstrated by conjugation of rabbit IgG molecules on the surface of the microbeads via carboxyl groups, which were then detected by fluorophores-labeled goat-anti-rabbit IgG antibodies.

Time-resolved single-step protease activity quantification using nanoplasmonic resonator sensors.

Protease activity measurement has broad application in drug screening, diagnosis and disease staging, and molecular profiling. However, conventional immunopeptidemetric assays (IMPA) exhibit low fluorescence signal-to-noise ratios, preventing reliable measurements at lower concentrations in the clinically important picomolar to nanomolar range. Here, we demonstrated a highly sensitive measurement of protease activity using a nanoplasmonic resonator (NPR). NPRs enhance Raman signals by 6.1 x 10(10) times in a highly reproducible manner, enabling fast detection of proteolytically active prostate-specific antigen (paPSA) activities in real-time, at a sensitivity level of 6 pM (0.2 ng/mL) with a dynamic range of 3 orders of magnitude. Experiments on extracellular fluid (ECF) from the paPSA-positive cells demonstrate specific detection in a complex biofluid background. This method offers a fast, sensitive, accurate, and one-step approach to detect the proteases' activities in very small sample volumes.

Picomolar sensitivity MRI and photoacoustic imaging of cobalt nanoparticles.

Multimodality imaging based on complementary detection principles has broad clinical applications and promises to improve the accuracy of medical diagnosis. This means that a tracer particle advantageously incorporates multiple functionalities into a single delivery vehicle. In the present work, we explore a unique combination of MRI and photoacoustic tomography (PAT) to detect picomolar concentrations of nanoparticles. The nanoconstruct consists of ferromagnetic (Co) particles coated with gold (Au) for biocompatibility and a unique shape that enables optical absorption over a broad range of frequencies. The end result is a dual-modality probe useful for the detection of trace amounts of nanoparticles in biological tissues, in which MRI provides volume detection, whereas PAT performs edge detection.

Facile functionalization of multilayer fullerenes (carbon nano-onions) by nitrene chemistry and "grafting from" strategy.

Facile functionalization of multilayer fullerenes (carbon nano-onions, CNOs) was carried out by [2+1] cycloaddition of nitrenes. The products were further derivatized by using the "grafting from" strategy of in situ ring-opening polymerization (ROP) and atom transfer radical polymerization (ATRP). Using one-step nitrene chemistry with high-energy reagents, such as azidoethanol and azidoethyl 2-bromo-2-methyl propanoate, in N-methyl-2-pyrrolidone at 160 degrees C for 16 h, hydroxyl and bromide functionalities were introduced onto the surfaces of CNOs. These hydroxyl CNOs (CNO-OH) and bromic CNOs (CNO-Br) were extensively characterized by various techniques such as thermal gravimetric analysis (TGA), transmission electron microscopy (TEM), Raman spectroscopy and X-ray photo electron spectroscopy (XPS). TGA measurements indicated that the surface hydroxyl and bromide group density reached 1.49 and 0.49 mmol g(-1), respectively. The as-functionalized CNOs showed much better solubility in solvents than pristine CNOs. The CNO-OH were also observed to fluoresce at lambda = 453 nm in water. The CNO-OH and CNO-Br can be conveniently utilized as macroinitiators to conduct surface-initiated in-situ polymerizations. Poly(epsilon-caprolactone) (PCL, 45 wt%) and polystyrene (PS, 60 wt%) were then grafted from surfaces of CNOs through the ROP of epsilon-caprolactone with the macroinitiator CNO-OH and the ATRP of styrene with the macroinitiator CNO-Br, respectively. The structures and morphology of the resulting products were characterized by (1)H NMR, scanning electron microscopy (SEM), TEM, and atomic force microscopy (AFM). The polymer functionalized CNOs have good solubility/dispersibility in common organic solvents. The facile and scalable functionalization approaches can pave the way for the comprehensive investigation of chemistry of CNOs and fabrication of novel CNO-based nanomaterials and nanodevices.

Quantitative and label-free technique for measuring protease activity and inhibition using a microfluidic cantilever array.

We report the use of a SiN x based gold coated microcantilever array to quantitatively measure the activity and inhibition of a model protease immobilized on its surface. Trypsin was covalently bound to the gold surface of the microcantilever using a synthetic spacer, and the remaining exposed silicon nitride surface was passivated with silanated polyethylene glycol. The nanoscale cantilever motions induced by trypsin during substrate turnover were quantitatively measured using an optical laser-deflection technique. These microcantilever deflections directly correlated with the degree of protease turnover of excess synthetic fibronectin substrate ( K M = 0.58 x 10 (-6) M). Inhibition of surface-immobilized trypsin by soybean trypsin inhibitor (SBTI) was also observed using this system.

Peptide-nanoparticle hybrid SERS probes for optical detection of protease activity.

Real-time in situ detection of active proteases is crucial for early-stage cancer screening and cell signaling pathway study; however, it is difficult to achieve using fluorescence or radioactive probes at volumes below 1 nL. Here we demonstrated a hybrid optical probe by incorporating nanocrescent particle and peptides with artificial tag molecules. We performed a proof-of-concept study using prostate specific antigen (PSA), one of the most prominent prostate cancer markers, and a serine protease present in patients' seminal fluid and serum. The Raman spectral signal from the tag molecules is enhanced by the nanocrescent and the signal is monitored as the indicator for peptide cleavage in a femtoliter reaction volume, at levels close to a single proteolytically active PSA molecule. The high reaction specificity of the peptides on individual nanoparticles minimizes the false detection of other serine proteases and background Raman signal, which results in a high-fidelity and high-signal-to-noise-ratio cancer nanoprobe that can be easily incorporated into nano/microfluidic devices.

Charge-associated effects of fullerene derivatives on microbial structural integrity and central metabolism.

The effects of four types of fullerene compounds (C60, C60-OH, C60-COOH, C60-NH2) were examined on two model microorganisms (Escherichia coli W3110 and Shewanella oneidensis MR-1). Positively charged C60-NH2 at concentrations as low as 10 mg/L inhibited growth and reduced substrate uptake for both microorganisms. Scanning electron microscopy (SEM) revealed damage to cellular structures. Neutrally charged C60 and C60-OH had mild negative effects on S. oneidensis MR-1, whereas the negatively charged C60-COOH did not affect either microorganism's growth. The effect of fullerene compounds on global metabolism was further investigated using [3-13C]L-lactate isotopic labeling, which tracks perturbations to metabolic reaction rates in bacteria by examining the change in the isotopic labeling pattern in the resulting metabolites (often amino acids).1-3 The 13C isotopomer analysis from all fullerene-exposed cultures revealed no significant differences in isotopomer distributions from unstressed cells. This result indicates that microbial central metabolism is robust to environmental stress inflicted by fullerene nanoparticles. In addition, although C60-NH2 compounds caused mechanical stress on the cell wall or membrane, both S. oneidensis MR-1 and E. coli W3110 can efficiently alleviate such stress by cell aggregation and precipitation of the toxic nanoparticles. The results presented here favor the hypothesis that fullerenes cause more membrane stress 4-6 than perturbation to energy metabolism.7.

Qdot nanobarcodes for multiplexed gene expression analysis.

We report a quantum dot (Qdot) nanobarcode-based microbead random array platform for accurate and reproducible gene expression profiling in a high-throughput and multiplexed format. Four different sizes of Qdots, with emissions at 525, 545, 565, and 585 nm are mixed with a polymer and coated onto the 8-mum-diameter magnetic microbeads to generate a nanobarcoded bead termed as QBeads. Twelve intensity levels for each of the four colors were used. Gene-specific oligonucleotide probes are conjugated to the surface of each spectrally nanobarcoded bead to create a multiplexed panel, and biotinylated cRNAs are generated from sample total RNA and hybridized to the gene probes on the microbeads. A fifth streptavidin Qdot (655 nm or infrared Qdot) binds to biotin on the cRNA, acting as a quantification reporter. Target identity was decoded based on spectral profile and intensity ratios of the four coding Qdots (525, 545, 565, and 585 nm). The intensity of the 655 nm Qdot reflects the level of biotinylated cRNA captured on the beads and provides the quantification for the corresponding target gene. The system shows a sensitivity of < or =10(4) target molecules detectable with T7 amplification, a level that is better than the 10(5) number achievable with a high-density microarray system, and approaching the 10(3)-10(4) level usually observed for quantitative PCR (qPCR). The QBead nanobarcode system has a dynamic range of 3.5 logs, better than the 2-3 logs observed on various microarray platforms. The hybridization reaction is performed in liquid phase and completed in 1-2 hours, at least 1 order of magnitude faster than microarray-based hybridizations. Detectable fold change is lower than 1.4-fold, showing high precision even at close to single copy per cell level. Reproducibility for this proof-of-concept study approaches that of Affymetrix GeneChip microarray, with an R(2) value between two repeats at 0.984, and interwell CV around 5%. In addition, it provides increased flexibility, convenience, and cost-effectiveness in comparison to conventional gene expression profiling methods.

Cellular effect of high doses of silica-coated quantum dot profiled with high throughput gene expression analysis and high content cellomics measurements.

Quantum dots (Qdots) are now used extensively for labeling in biomedical research, and this use is predicted to grow because of their many advantages over alternative labeling methods. Uncoated Qdots made of core/shell CdSe/ZnS are toxic to cells because of the release of Cd2+ ions into the cellular environment. This problem has been partially overcome by coating Qdots with polymers, poly(ethylene glycol) (PEG), or other inert molecules. The most promising coating to date, for reducing toxicity, appears to be PEG. When PEG-coated silanized Qdots (PEG-silane-Qdots) are used to treat cells, toxicity is not observed, even at dosages above 10-20 nM, a concentration inducing death when cells are treated with polymer or mercaptoacid coated Qdots. Because of the importance of Qdots in current and future biomedical and clinical applications, we believe it is essential to more completely understand and verify this negative global response from cells treated with PEG-silane-Qdots. Consequently, we examined the molecular and cellular response of cells treated with two different dosages of PEG-silane-Qdots. Human fibroblasts were exposed to 8 and 80 nM of these Qdots, and both phenotypic as well as whole genome expression measurements were made. PEG-silane-Qdots did not induce any statistically significant cell cycle changes and minimal apoptosis/necrosis in lung fibroblasts (IMR-90) as measured by high content image analysis, regardless of the treatment dosage. A slight increase in apoptosis/necrosis was observed in treated human skin fibroblasts (HSF-42) at both the low and the high dosages. We performed genome-wide expression array analysis of HSF-42 exposed to doses 8 and 80 nM to link the global cell response to a molecular and genetic phenotype. We used a gene array containing approximately 22,000 total probe sets, containing 18,400 probe sets from known genes. Only approximately 50 genes (approximately 0.2% of all the genes tested) exhibited a statistically significant change in expression level of greater than 2-fold. Genes activated in treated cells included those involved in carbohydrate binding, intracellular vesicle formation, and cellular response to stress. Conversely, PEG-silane-Qdots induce a down-regulation of genes involved in controlling the M-phase progression of mitosis, spindle formation, and cytokinesis. Promoter analysis of these results reveals that expression changes may be attributed to the down-regulation of FOXM and BHLB2 transcription factors. Remarkably, PEG-silane-Qdots, unlike carbon nanotubes, do not activate genes indicative of a strong immune and inflammatory response or heavy-metal-related toxicity. The experimental evidence shows that CdSe/ZnS Qdots, if appropriately protected, induce negligible toxicity to the model cell system studied here, even when exposed to high dosages. This study indicates that PEG-coated silanized Qdots pose minimal impact to cells and are a very promising alternative to uncoated Qdots.

Lithographic techniques and surface chemistries for the fabrication of PEG-passivated protein microarrays.

This article presents a new technique to fabricate patterns of functional molecules surrounded by a coating of the inert poly(ethylene glycol) (PEG) on glass slides for applications in protein microarray technology. The chief advantages of this technique are that it is based entirely on standard lithography processes, makes use of glass slides employing surface chemistries that are standard in the microarray community, and has the potential to massively scale up the density of microarray spots. It is shown that proteins and antibodies can be made to self-assemble on the functional patterns in a microarray format, with the PEG coating acting as an effective passivating agent to prevent non-specific protein adsorption. Various standard surface chemistries such as aldehyde, epoxy and amine are explored for the functional layer, and it is conclusively demonstrated that only an amine-terminated surface satisfies all the process constraints imposed by the lithography process sequence. The effectiveness of this microarray technology is demonstrated by patterning fluorescent streptavidin and a fluorescent secondary antibody using the well-known and highly specific interaction between biotin and streptavidin.

Molecular characterization of the cytotoxic mechanism of multiwall carbon nanotubes and nano-onions on human skin fibroblast.

The increasing use of nanotechnology in consumer products and medical applications underlies the importance of understanding its potential toxic effects to people and the environment. Although both fullerene and carbon nanotubes have been demonstrated to accumulate to cytotoxic levels within organs of various animal models and cell types and carbon nanomaterials have been exploited for cancer therapies, the molecular and cellular mechanisms for cytotoxicity of this class of nanomaterial are not yet fully apparent. To address this question, we have performed whole genome expression array analysis and high content image analysis based phenotypic measurements on human skin fibroblast cell populations exposed to multiwall carbon nano-onions (MWCNOs) and multiwall carbon nanotubes (MWCNTs). Here we demonstrate that exposing cells to MWCNOs and MWCNTs at cytotoxic doses induces cell cycle arrest and increases apoptosis/necrosis. Expression array analysis indicates that multiple cellular pathways are perturbed after exposure to these nanomaterials at these doses, with material-specific toxigenomic profiles observed. Moreover, there are also distinct qualitative and quantitative differences in gene expression profiles, with each material at different dosage levels (6 and 0.6 microg/mL for MWCNO and 0.6 and 0.06 microg/mL for MWCNT). MWCNO and MWCNT exposure activates genes involved in cellular transport, metabolism, cell cycle regulation, and stress response. MWCNTs induce genes indicative of a strong immune and inflammatory response within skin fibroblasts, while MWCNO changes are concentrated in genes induced in response to external stimuli. Promoter analysis of the microarray results demonstrate that interferon and p38/ERK-MAPK cascades are critical pathway components in the induced signal transduction contributing to the more adverse effects observed upon exposure to MWCNTs as compared to MWCNOs.