[Composition and morphology of Scutellariae Radix-Coptidis Rhizoma decoction co-precipitate and effect on in vivo behavior of decocting liquid].

Scutellariae Radix-Coptidis Rhizoma(SR-CR) herbal pair is commonly used in many compound prescriptions for their synergistic heat-clearing and dampness-drying properties. During the decoction process, a substantial amount of precipitate is generated. However, there have been no explicit reports on the composition, morphology, and potential effects of this precipitate on the in vivo behavior of SR-CR decoction. This study employed high-performance liquid chromatography(HPLC), high-resolution mass spectrometry, and other techniques to analyze the composition of the co-precipitate in the decoction of SR-CR. Scanning electron microscopy and mass spectrometry imaging were used to analyze its appearance and morphology. Additionally, rats were used to investigate the effects of the co-precipitate on the in vivo behavior of the main components in the SR-CR decoction. The research findings indicated that eight components, including coptisine, berberine, epiberberine, palmatine, baicalin, oroxylin A-7-O-ß-D-glucuronide, wogonoside and baicalein, constituted the primary composition of the co-precipitate. Among these, baicalin and berberine hydrochloride were the most abundant, accounting for about 60% of the total weight. Moreover, the co-precipitate contained 18% tannins. Morphological analysis revealed that the particles in the SR-CR decoction precipitate were spherical microparticles with an average diameter of around 600 nm. Pharmacokinetic research demonstrated that there were significant differences in the AUC, C_(max), t_(1/2), and T_(max) of baicalin, a major component, in rats administered with lyophilized powders of the combined decoction and single decoctions of SR-CR orally, suggesting that the precipitate generated during the decoction process can affect the in vivo behavior of the main components of the SR-CR decoction. It can reduce the absorption of baicalin in the body, decrease the extent of rapid drug release, and to a certain extent, prevent adverse reactions or side effects.

[Application of multivariate models in whole process control of solid preparations].

The production of solid preparations is a multi-unit and multi-step system and is a whole process chain. Its quality is affected by many factors such as material properties and process parameters. As an important analysis tool, multivariate models play an important role in pharmaceutical monitoring. Besides, multivariate models can comprehensively understand the multi-factor relationship between material properties, process parameters, and quality attributes of products, thereby promoting the whole process optimization and controlling the drug production quality. This paper summarized the application of commonly used multivariate models in the process of solid preparations, which provides a certain reference for the process modeling of Chinese medicinal preparations.

Study on the Mechanism of Ionic Liquids Improving the Extraction Efficiency of Essential Oil Based on Experimental Optimization and Density Functional Theory: The Fennel (Foeniculi fructus) Essential Oil Case.

In this work, microwave-assisted ionic liquids treatment, followed by hydro-distillation (MILT-HD), as an efficient extraction technology, was used to extract essential oil. The purpose for this was to use multivariate analysis (MVA) models to investigate the effects of potential critical process parameters on the extraction efficiency of essential oil, and explore the mechanism of ionic liquids (ILs). According to the design of experiment (DoE), under optimal process conditions, the extraction efficiency of essential oil was dramatically enhanced, and had low energy demands. Since little is known regarding those mechanisms, according to the non-covalent interaction analysis, the underlying mechanism for ILs improving extraction efficiency was explored based on the density functional theory (DFT). The results showed that ILs could form intense non-covalent bond interaction with cellulose. It helped destroy the network hydrogen bond structure of cellulose in plant cells and caused the essential oils in the cells to be more easily exposed to the extraction solution, thereby accelerating extraction efficiency. Based on this work, it is conducive to understand the MILT-HD process better and gain knowledge of the mechanism of ILs.

Pharmaceutical application of multivariate modelling techniques: a review on the manufacturing of tablets.

The tablet manufacturing process is a complex system, especially in continuous manufacturing (CM). It includes multiple unit operations, such as mixing, granulation, and tableting. In tablet manufacturing, critical quality attributes are influenced by multiple factorial relationships between material properties, process variables, and interactions. Moreover, the variation in raw material attributes and manufacturing processes is an inherent characteristic and seriously affects the quality of pharmaceutical products. To deepen our understanding of the tablet manufacturing process, multivariable modeling techniques can replace univariate analysis to investigate tablet manufacturing. In this review, the roles of the most prominent multivariate modeling techniques in the tablet manufacturing process are discussed. The review mainly focuses on applying multivariate modeling techniques to process understanding, optimization, process monitoring, and process control within multiple unit operations. To minimize the errors in the process of modeling, good modeling practice (GMoP) was introduced into the pharmaceutical process. Furthermore, current progress in the continuous manufacturing of tablets and the role of multivariate modeling techniques in continuous manufacturing are introduced. In this review, information is provided to both researchers and manufacturers to improve tablet quality.

Metal Organic Frameworks as Drug Targeting Delivery Vehicles in the Treatment of Cancer.

: In recent years, metal organic frameworks (MOFs) have been widely developed as vehicles for the effective delivery of drugs to tumor tissues. Due to the high loading capacity and excellent biocompatibility of MOFs, they provide an unprecedented opportunity for the treatment of cancer. However, drugs which are commonly used to treat cancer often cause side effects in normal tissue accumulation. Therefore, the strategy of drug targeting delivery based on MOFs has excellent research significance. Here, we introduce several intelligent targeted drug delivery systems based on MOFs and their characteristics as drug-loading systems, and the challenges of MOFs are discussed. This article covers the following types of MOFs: Isoreticular Metal Organic Frameworks (IRMOFs), Materials of Institute Lavoisier (MILs), Zeolitic Imidazolate Frameworks (ZIFs), University of Oslo (UiOs), and MOFs-based core-shell structures. Generally, MOFs can be reasonably controlled at the nanometer size to effectively achieve passive targeting. In addition, different ligands can be modified on MOFs for active or physicochemical targeting. On the one hand, the targeting strategy can improve the concentration of the drugs at the tumor site to improve the efficacy, on the other hand, it can avoid the release of the drugs in normal tissues to improve safety. Despite the challenges of clinical application of MOFs, MOFs have a number of advantages as a kind of smart delivery vehicle, which offer possibilities for clinical applications.

[Study on benchmark preparation technology of boiled and powdered classical prescriptions by taking Houpo Wenzhong Decoction as an example].

In recent years,the development and application of classical famous prescriptions have attracted much attention. However,the differences between ancient and modern conditions lead to difficulties in carrying out practical work. In this paper,with Houpu Wenzhong Decoction as an example,the key technologies of boiling granularity,water addition,boiling time and sample pretreatment methods were investigated on the basis of sufficient literature research. The experimental results showed that there was no significant difference in the concentration of index components between those with different granularity( 2 mm and 3-5 mm) and different decocting time( 30 min and 60 min),but the extraction rate of index components was relatively high when the granularity of powder was 2 mm and decocting time was 30 min. With the increase of water content,the concentration of index components and the extraction rate were increased in varying degrees. A certain proportion of methanol aqueous solution was used as the resolvent before content determination of the reference sample of Houpu Wenzhong Decoction,which could take into account both the spectral information of water-soluble components and fat-soluble components in the prescription,and help to display the overall information of the prescription' s chemical components more comprehensively. At the same time,the boiling and dispersing classical prescriptions in the Catalogue of Ancient Classical Prescriptions( the first batch) were collected and summarized in this study; the key influencing factors of decocting process were analyzed from different angles,and preliminary research suggestions were put forward,so as to provide a certain direction and reference for the establishment of quality standard of Houpu Wenzhong Decoction,as well as for the development,research and clinical application of boiling and dispersing classical prescriptions.

Matrine Exerts Hepatotoxic Effects via the ROS-Dependent Mitochondrial Apoptosis Pathway and Inhibition of Nrf2-Mediated Antioxidant Response.

Matrine, an alkaloid isolated from Sophora flavescens, possesses a wide range of pharmacological properties. However, the use of matrine in clinical practice is limited due to its toxic effects. The present study investigated the roles of mitochondria and reactive oxygen species (ROS) in matrine-induced liver injury. Our results showed that treatment of HL-7702 cells with matrine led to significant and concentration- and time-dependent reductions in their viability, as well as significant and concentration-dependent increases in the number of apoptotic cells and supernatant lactate dehydrogenase (LDH) activity. The treatment led to significant increases in the population of cells in S phase and significant reduction of cell proportion in G0/G1 and G2/M phases. It also significantly and concentration-dependently increased the levels of ROS and malondialdehyde (MDA) but significantly and concentration-dependently reduced superoxide dismutase (SOD) activity, level of reduced glutathione (GSH), and mitochondrial membrane potential (MMP). Matrine treatment significantly and concentration-dependently upregulated the expressions of Bax, p53, p-p53, p21, cyclin E, Fas, cleaved caspase-3, caspase-8, and caspase-9 proteins and downregulated the expressions of Bcl-2, cyclin-dependent kinase 2 (CDK2), and cyclin A. It also significantly promoted the cleavage of poly(ADP-ribose)polymerase (PARP), upregulated Kelch-like ECH-associated protein 1 (Keap1) expression, and downregulated the expressions of cellular total and nuclear Nrf2. Matrine significantly inhibited the expressions of downstream oxidoreductases (Heme oxygenase-1 (HO-1) and NAD(P)H:quinone oxidoreductases 1 (NQO-1)) and enhanced the formation of Keap1/Nrf2 protein complex. These results show that the hepatotoxic effect of matrine is exerted via inhibition of Nrf2 pathway, activation of ROS-mediated mitochondrial apoptosis pathway, and cell cycle arrest at S phase. Pretreatment with N-acetyl cysteine (NAC) partially reversed matrine-induced hepatotoxicity.

Investigation of Metal-Organic Framework-5 (MOF-5) as an Antitumor Drug Oridonin Sustained Release Carrier.

Oridonin (ORI) is a natural active ingredient with strong anticancer activity. But its clinical use is restricted due to its poor water solubility, short half-life, and low bioavailability. The aim of this study is to utilize the metal organic framework material MOF-5 to load ORI in order to improve its release characteristics and bioavailability. Herein, MOF-5 was synthesized by the solvothermal method and direct addition method, and characterized by Scanning Electron Microscopy (SEM), X-Ray Diffraction (XRD), Fourier Transform Infrared Spectrometer (FTIR), Thermogravimetric Analysis (TG), Brunauer-Emmett-Teller (BET), and Dynamic Light Scattering (DLS), respectively. MOF-5 prepared by the optimal synthesis method was selected for drug-loading and in vitro release experiments. HepG2 cells were model cells. MTT assay, 4',6-diamidino-2-phenylindole (DAPI) staining and Annexin V/PI assay were used to detect the biological safety of blank carriers and the anticancer activity of drug-loaded materials. The results showed that nano-MOF-5 prepared by the direct addition method had complete structure, uniform size and good biocompatibility, and was suitable as an ORI carrier. The drug loading of ORI@MOF-5 was 52.86% ± 0.59%. The sustained release effect was reliable, and the cumulative release rate was about 87% in 60 h. ORI@MOF-5 had significant cytotoxicity (IC50:22.99 µg/mL) and apoptosis effect on HepG2 cells. ORI@MOF-5 is hopeful to become a new anticancer sustained release preparation. MOF-5 has significant potential as a drug carrier material.

Study on the Material Basis of Houpo Wenzhong Decoction by HPLC Fingerprint, UHPLC-ESI-LTQ-Orbitrap-MS, and Network Pharmacology.

Houpo Wenzhong Decoction (HWD) as a classical prescription has been widely used for hundreds of years. However, the quality of HWDs is difficult to control because of its herb materials from different regions. It is a new idea to use HPLC fingerprints, LTQ-ESI-Orbitrap-MS, and network pharmacology in combination to screen common components (CCs) as potential quality control indicators. In this paper, the fingerprints of HWDs were established, which were used to determine HWDs compounded from different sources of traditional Chinese medicines (TCMs). Through the similarity analysis, 45 CCs were selected. UHPLC-LTQ-ESI-Orbitrap-MS was used to carry out the chemical composition analysis of HWD. Seventy-three chemical constituents were distinguished, and 30 CCs were identified. Through network pharmacology, networks of candidate CCs, diseases, and candidate targets were constructed. Finally, four CCs were screened as potential active ingredient markers of HWD, and a method for content determination of these four components was established. A rapid, reasonable, and effective method for quality evaluation and control of HWDs was established. It provides a reference for the further development and research of HWDs and a new way of thinking for the research of other Chinese medicine prescriptions.

In Vitro Toxicity Study of a Porous Iron(III) Metal‒Organic Framework.

A MIL series metal‒organic framework (MOF), MIL-100(Fe), was successfully synthesized at the nanoscale and fully characterized by TEM, TGA, XRD, FTIR, DLS, and BET. A toxicological assessment was performed using two different cell lines: human normal liver cells (HL-7702) and hepatocellular carcinoma (HepG2). In vitro cytotoxicity of MIL-100(Fe) was evaluated by the MTT assay, LDH releasing rate assay, DAPI staining, and annexin V/PI double staining assay. The safe dose of MIL-100(Fe) was 80 µg/mL. It exhibited good biocompatibility, low cytotoxicity, and high cell survival rate (HL-7702 cells' viability >85.97%, HepG2 cells' viability >91.20%). Therefore, MIL-100(Fe) has a potential application as a drug carrier.