New insights into the influences of firework combustion on molecular composition and formation of sulfur- and halogen-containing organic compounds.

Firework (FW) events occur during various festivals worldwide and substantially negatively influence both air quality and human health. However, the effects of FWs on the chemical properties and formation of organic aerosols are far from clear. In this study, fine particulate matter (PM2.5) samples were collected in a suburban area in Qingdao, China during the Chinese Spring Festival. The concentrations of chemical species (especially carbonaceous components) in PM2.5 were measured using a combination of several state-of-the-art techniques. Our results showed that mass concentrations of water-soluble sulfate, potassium and chloride ions, and organic carbon drastically increased and became the predominant components in PM2.5 during FW events. Correspondingly, both the number and fractional contributions of sulfur (S)-containing subgroups (e.g., CHOS and CHONS compounds) and some chlorine (Cl)-containing organic (e.g., CHOSCl and CHONSCl) compounds identified using ultrahigh-resolution Fourier-transform ion cyclotron resonance mass spectrometry (FT-ICR MS) increased. The S- and Cl-containing compounds unique to the FW display period were identified, and their chemical characterization, sources, and formation mechanisms were elucidated by combining FT-ICR MS and quantum chemical calculations. Our results suggest that FW emissions play notable roles in both primary and secondary organic aerosol formation, especially for CHOS- and Cl-containing organic compounds.

Sediment resuspension as a driving force for organic carbon transference and rebalance in marginal seas.

The transfer of particulate organic carbon (POC) to dissolved organic carbon (DOC; OC transferP-D) is crucial for the marine carbon cycle. Sediment resuspension driven by hydrodynamic forcing can affect the burial of sedimentary POC and benthic biological processes in marginal sea. However, the role of sediment grain size fraction on OC transferP-D and the subsequent impact on OC cycling remain unknown. Here, we conduct sediment resuspension simulations by resuspending grain-size fractionated sediments (< 20, 20-63, and > 63 µm) into filtered seawater, combined with analyses of OC content, optical characteristics, 13C and 14C isotope compositions, and molecular dynamics simulations to investigate OC transferP-D and its regulations on OC bioavailability under sediment resuspension. Our results show that the relative intensities of terrestrial humic-like OC (refractory DOC) increase in resuspension experiments of < 20, 20-63, and > 63 µm sediments by 0.14, 0.01, and 0.03, respectively, likely suggesting that sediment resuspension drives refractory DOC transfer into seawater. The variations in the relative intensities of microbial protein-like DOC are linked to the change of terrestrial humic-like OC, accompanied by higher DOC content and reactivity in seawater, particularly in finer sediments resuspension experiments. This implies that transferred DOC likely fuels microbial growth, contributing to the subsequent enhancement of DOC bioavailability in seawater. Our results also show that the POC contents increase by 0.35 %, 0.66 %, and 0.93 % in < 20, 20-63, and > 63 µm resuspension experiments at the end of incubation, respectively. This suggests that the re-absorption of OC on particles may be a significant process, but previously unrecognized during sediment resuspension. Overall, our findings suggest that sediment resuspension promotes the OC transferP-D, and the magnitudes of OC transferP-D further influence the DOC and POC properties by inducing microbial production and respiration. These processes significantly affect the dynamics and recycling of biological carbon pump in shallow marginal seas.

Revealing the aging process of solid electrolyte interphase on SiOx anode.

As one of the most promising alternatives to graphite negative electrodes, silicon oxide (SiOx) has been hindered by its fast capacity fading. Solid electrolyte interphase (SEI) aging on silicon SiOx has been recognized as the most critical yet least understood facet. Herein, leveraging 3D focused ion beam-scanning electron microscopy (FIB-SEM) tomographic imaging, we reveal an exceptionally characteristic SEI microstructure with an incompact inner region and a dense outer region, which overturns the prevailing belief that SEIs are homogeneous structure and reveals the SEI evolution process. Through combining nanoprobe and electron energy loss spectroscopy (EELS), it is also discovered that the electronic conductivity of thick SEI relies on the percolation network within composed of conductive agents (e.g., carbon black particles), which are embedded into the SEI upon its growth. Therefore, the free growth of SEI will gradually attenuate this electron percolation network, thereby causing capacity decay of SiOx. Based on these findings, a proof-of-concept strategy is adopted to mechanically restrict the SEI growth via applying a confining layer on top of the electrode. Through shedding light on the fundamental understanding of SEI aging for SiOx anodes, this work could potentially inspire viable improving strategies in the future.

Optical properties and molecular composition of wintertime atmospheric water-soluble organic carbon in different coastal cities of eastern China.

To evaluate the optical properties and molecular composition of water-soluble organic carbon (WSOC) in the atmosphere of coastal cities, particle samples were collected in Tianjin, Qingdao and Shanghai, three coastal cities in eastern China. Subsequent analysis by ultraviolet visible and fluorescence spectrometer and electrospray ionization Fourier transform ion cyclotron resonance mass spectrometry were performed. The results showed that the concentration levels and light absorption ability of WSOC decreased from the north to south cities, ranking as Tianjin > Qingdao > Shanghai. Three major fluorescent components including less­oxygenated humic-like substances (52-60 %), highly­oxygenated humic-like substances (15-31 %) and protein-like substances (17-31 %) were identified in WSOC based on the fluorescence spectroscopy and parallel factor analysis, which might be closely related to anthropogenic emissions and continental sources as well as secondary formation processes. Five subgroups of molecular components were further identified in WSOC, including the predominant CHON compounds (35-43 %), sulfur-containing compounds (i.e., CHONS and CHOS compounds, 24-43 %), CHO compounds (20-26 %) and halogen-containing compounds (1-7 %). Compared to marine air masses influenced samples, WSOC affected by continental air masses exhibited higher light absorption coefficients and generally had a higher degree of aromaticity and unsaturation, as well as contained more molecular formulas of WSOC, especially enriched with sulfur-containing compounds. In contrast, relatively more abundant halogen-containing compounds were identified in the marine air masses influenced samples. Overall, this study provided new insights into the light-absorbing and chemical properties of WSOC in coastal cities, especially under the influences of continental and marine air masses.

Characteristics of wintertime carbonaceous aerosols in two typical cities in Beijing-Tianjin-Hebei region, China: Insights from multiyear measurements.

In order to investigate the impact of "Blue Sky War" implemented during 2018-2020 on carbonaceous aerosols in Beijing-Tianjin-Hebei (BTH) region, China, fine particulate matter (PM2.5) samples were collected simultaneously in Tianjin and Handan in three consecutive winters from 2018 to 2020. Organic carbon (OC) and elemental carbon (EC) in PM2.5 were measured with the same thermal-optical methods and analysis protocols. Significant reductions in primary organic carbon (POC) and EC concentrations were observed both in Tianjin and Handan, with decreasing rates of 0.65 and 2.95 µg m-3 yr-1 for POC and 0.13 and 0.64 µg m-3 yr-1 for EC, respectively. The measured absorption coefficients of EC (babs, EC) also decreased year by year, with a decreasing rate of 1.82 and 6.16 Mm-1 yr-1 in Tianjin and Handan, respectively. The estimated secondary organic carbon (SOC) concentrations decreased first and then increased in both Tianjin and Handan, accounting for more than half of the total OC in winter of 2020-2021 and with increasing contributions especially in highly polluted days. SOC was recognized as one of key factors influencing EC light absorption. EC in the two cities was relatively more related to coal combustion and industrial sources. The reductions of primary carbonaceous components may be attributed to the air quality regulations targeting coal combustion and industrial sources emissions in BTH area. Potential source contribution function (PSCF) analysis results indicated that the major source areas of OC and EC in Tianjin were the southwest region of the sampling site, while the southeast areas for Handan. These findings demonstrated the effectiveness of air quality regulation in primary emissions in typical polluted cities in BTH region and highlighted the needs for further control and in-depth investigation of SOC formation along with implementation of air pollution control act in the future.

Amorphous Solid Dispersions: Role of the Polymer and Its Importance in Physical Stability and In Vitro Performance.

Amorphous solid dispersions stabilized by one or more polymer(s) have been widely used for delivering amorphous drugs with poor water solubilities, and they have gained great market success. Polymer selection is important for preparing robust amorphous solid dispersions, and considerations should be given as to how the critical attributes of a polymer can enhance the physical stability, and the in vitro and in vivo performances of a drug. This article provides a comprehensive overview for recent developments in the understanding the role of polymers in amorphous solid dispersions from the aspects of nucleation, crystal growth, overall crystallization, miscibility, phase separation, dissolution, and supersaturation. The critical properties of polymers affecting the physical stability and the in vitro performance of amorphous solid dispersions are also highlighted. Moreover, a perspective regarding the current research gaps and novel research directions for better understanding the role of the polymer is provided. This review will provide guidance for the rational design of polymer-based amorphous pharmaceutical solids with desired physicochemical properties from the perspective of physical stability and in vitro performance.

Recent advances in drug polymorphs: Aspects of pharmaceutical properties and selective crystallization.

Drug polymorphism, an established term used to describe the phenomenon that a drug can exist in different crystalline phases, has attracted great interests in pharmaceutical field in consideration of its important role in affecting the pharmaceutical performance of oral formulations. This paper presents an overview of recent advances in the research on polymorphic drug systems including understandings on nucleation, crystal growth, dissolution, mechanical properties, polymorphic transformation, etc. Moreover, new strategies and mechanisms in the control of polymorphic forms are also highlighted in this review. Furthermore, challenges and trends in the development of polymorphic drugs are briefly discussed, aiming at developing effective and efficient pharmaceutical formulations containing the polymorphic drugs.

From bulk to interface: electrochemical phenomena and mechanism studies in batteries via electrochemical quartz crystal microbalance.

Understanding the bulk and interfacial behaviors during the operation of batteries (e.g., Li-ion, Na-ion, Li-O2 batteries, etc.) is of great significance for the continuing improvement of the performance. Electrochemical quartz crystal microbalance (EQCM) is a powerful tool to this end, as it enables in situ investigation into various phenomena, including ion insertion/deinsertion within electrodes, solid nucleation from the electrolyte, interphasial formation/evolution and solid-liquid coordination. As such, EQCM analysis helps to decipher the underlying mechanisms both in the bulk and at the interface. This tutorial review will present the recent progress in mechanistic studies of batteries achieved by the EQCM technology. The fundamentals and unique capability of EQCM are first discussed and compared with other techniques, and then the combination of EQCM with other in situ techniques is also covered. In addition, the recent studies utilizing EQCM technologies in revealing phenomena and mechanisms of various batteries are reviewed. Perspectives regarding the future application of EQCM in battery studies are given at the end.

Low Concentration DMF/H2O Hybrid Electrolyte: A New Opportunity for Anode Materials in Aqueous Potassium-Ion Batteries.

Superconcentrated "water-in-salt" electrolytes have greatly widened the electrochemical stable window (ESW) of aqueous electrolytes, but they also generate new problems, including high costs, high viscosity, and low conductivity. Here we report a 2 m low concentration electrolyte using an N,N-dimethylformamide/water (DMF/H2O) hybrid solvent, which provides a wider ESW (2.89 V) than an aqueous electrolyte (2.66 V) and presents nonflammability, high conductivity, and low viscosity characteristics. In 2 m DMF/H2O hybrid electrolyte, the LUMO energy of the DMF solvent (-0.00931 a.u.) is lower than that of H2O (-0.00735 a.u.), which could effectively promote the degradation of FSI- and lead to stable solid electrolyte interphase formation. As a result, the electrochemical reversibility and cyclability of the KTi2(PO4)3@C (KTP@C) anode in the aqueous electrolyte have been significantly enhanced with the help of DMF addition. Moreover, the K2Zn3(Fe(CN)6)2 (KZnHCF)//KTP@C full potassium-ion battery exhibits highly efficient stability and rate capability with a long cycle performance over 10 000 cycles and delivers a specific discharge capacity of 33 mAh g-1 at a high current density of 20 A g-1. Low concentrations of DMF/H2O hybrid electrolytes can inhibit the hydrogen evolution reaction of aqueous electrolytes, providing more opportunities for the practical application of electrode materials. Not limited to DMF solvent, mixing organic and aqueous solvents will provide more available options and perspectives for improving the energy density and long cycle performance of the aqueous metal-ion battery.

Substantial emissions of nitrated aromatic compounds in the particle and gas phases in the waste gases from eight industries.

Nitrated aromatic compounds, the ubiquitous nitrogen-containing organic pollutants, impact the environment and organisms adversely. As industrial raw materials and intermediates, nitrated aromatic compounds and their aromatic precursors are widely employed in the industrial production activities. Nevertheless, their emission from industrial waste gases has so far not been studied extensively. In this study, the concentrations of 12 nitrated aromatic compounds in the particle and gas phases downwind of 16 factories encompassing eight industries (i.e., pharmaceutical, weaving and dyeing, herbicide, explosive, painting, phenolic resin, paper pulp and polystyrene foam industries), were determined by ultra-high-performance liquid chromatography-mass spectrometry. Their concentrations in the particle and gas phases from different factories ranged from 114.7 ± 63.5 to 296.6 ± 62.5 ng m-3 and 148.7 ± 7.4 to 309.8 ± 26.2 ng m-3, respectively, thus, exhibiting significantly high concentrations as compared to the background sites. Among the 12 detected species, 4-nitrophenol, 5-nitrosalicylic acid, 3-nitrosalicylic acid and 4-methyl-2,6-dinitrophenol were observed to be the predominant species, with total fractions up to 47.9-72.3% and 63.1-70.3% in the particle and gas phases, respectively. Their emission profiles with respect to the industrial activities exhibited large discrepancies as compared to the combustion sources, thus, indicating different formation mechanisms. The emission ratios of particulate nitrated aromatic compounds owing to the industrial activities were estimated between 0.5 ± 0.2 and 4.3 ± 1.5 ng µg-1, which were higher than or comparable to those from various combustion sources. The findings from this study confirm the industrial emission to be an important source of nitrated aromatic compounds in the atmosphere. The substantial emissions of nitrated aromatic compounds from various industries reported in this study provide the fundamental basis for further emission estimation and pollution control.

Wavelength-Dependent Solar N2 Fixation into Ammonia and Nitrate in Pure Water.

Solar-driven N2 fixation using a photocatalyst in water presents a promising alternative to the traditional Haber-Bosch process in terms of both energy efficiency and environmental concern. At present, the product of solar N2 fixation is either NH4 + or NO3 -. Few reports described the simultaneous formation of ammonia (NH4 +) and nitrate (NO3 -) by a photocatalytic reaction and the related mechanism. In this work, we report a strategy to photocatalytically fix nitrogen through simultaneous reduction and oxidation to produce NH4 + and NO3 - by W18O49 nanowires in pure water. The underlying mechanism of wavelength-dependent N2 fixation in the presence of surface defects is proposed, with an emphasis on oxygen vacancies that not only facilitate the activation and dissociation of N2 but also improve light absorption and the separation of the photoexcited carriers. Both NH4 + and NO3 - can be produced in pure water under a simulated solar light and even till the wavelength reaching 730 nm. The maximum quantum efficiency reaches 9% at 365 nm. Theoretical calculation reveals that disproportionation reaction of the N2 molecule is more energetically favorable than either reduction or oxidation alone. It is worth noting that the molar fraction of NH4 + in the total product (NH4 + plus NO3 -) shows an inverted volcano shape from 365 nm to 730 nm. The increased fraction of NO3 - from 365 nm to around 427 nm results from the competition between the oxygen evolution reaction (OER) at W sites without oxygen vacancies and the N2 oxidation reaction (NOR) at oxygen vacancy sites, which is driven by the intrinsically delocalized photoexcited holes. From 427 nm to 730 nm, NOR is energetically restricted due to its higher equilibrium potential than that of OER, accompanied by the localized photoexcited holes on oxygen vacancies. Full disproportionation of N2 is achieved within a range of wavelength from ~427 nm to ~515 nm. This work presents a rational strategy to efficiently utilize the photoexcited carriers and optimize the photocatalyst for practical nitrogen fixation.

Unravelling H+ /Zn2+ Synergistic Intercalation in a Novel Phase of Manganese Oxide for High-Performance Aqueous Rechargeable Battery.

Aqueous Zn-MnO2 batteries using mild electrolyte show great potential in large-scale energy storage (LSES) application, due to high safety and low cost. However, structure collapse of manganese oxides upon cycling caused by the conversion mechanism (e.g., from tunnel to layer structures for α-, ß-, and γ-phases) is one of the most urgent issues plaguing its practical applications. Herein, to avoid the phase conversion issue and enhance battery performance, a structurally robust novel phase of manganese oxide MnO2 H0.16 (H2 O)0.27 (MON) nanosheet with thickness of ≈2.5 nm is designed and synthesized as a promising cathode material, in which a nanosheet structure combined with a novel H+ /Zn2+ synergistic intercalation mechanism is demonstrated and evidenced. Accordingly, a high-performance Zn/MON cell is achieved, showing a high energy density of ≈228.5 Wh kg-1 , impressive cyclability with capacity retention of 96% at 0.5 C after 300 cycles, as well as exhibiting rate performance of 115.1 mAh g-1 at current rate of 10 C. To the best current knowledge, this H+ /Zn2+ synergistic intercalation mechanism is first reported in an aqueous battery system, which opens a new opportunity for development of high-performance aqueous Zn ion batteries for LSES.

Self-Assembly of Antisite Defectless nano-LiFePO4 @C/Reduced Graphene Oxide Microspheres for High-Performance Lithium-Ion Batteries.

LiFePO4 @C/reduced graphene oxide (rGO) hierarchical microspheres with superior electrochemical activity and a high tap density were first synthesized by using a Fe3+ -based single inorganic precursor (LiFePO4 OH@RF/GO; RF=resorcinol-formaldehyde, GO=graphene oxide) obtained from a template-free self-assembly synthesis followed by direct calcination. The synthetic process requires no physical mixing step. The phase transformation pathway from tavorite LiFePO4 OH to olivine LiFePO4 upon calcination was determined by means of the in situ high-temperature XRD technique. Benefitting from the unique structure of the material, these microspheres can be densely packed together, giving a high tap density of 1.3 g cm-3 , and simultaneously, defectless LiFePO4 primary nanocrystals modified with a highly conductive surface carbon layer and ultrathin rGO provide good electronic and ionic kinetics for fast electron/Li+ ion transport.

Insight into fast ion migration kinetics of a new hybrid single Li-ion conductor based on aluminate complexes for solid-state Li-ion batteries.

A novel hybrid single Li-ion conductor (SLIC) for a Li-ion solid electrolyte was prepared by mixing aluminate complexes-polyethylene glycol (LiAl-PEG) and polyethylene oxide (PEO) for solid-state Li-ion batteries. The LiAl-PEG/PEO blend possesses high thermal stability and electrochemical stability with an oxidation decomposition voltage up to 4.8 V. Notably, this hybrid SLIC exhibits not only excellent Li-ion migration kinetics, but also good ionic conductivity as high as 4.0 × 10-5 and 2.6 × 10-4 S cm-1 at 30 and 100 °C, respectively, which is much higher than previously reported SLICs. Importantly, by the combination of molecular dynamics simulations and experiment measurements, the mechanisms of Li-ion migration across the SLIC (LiAl-PEG), the salt-in-polymer (LiClO4/PEO) and the optimized SLIC (LiAl-PEG/PEO) were systematically investigated for the first time. The new hopping transport mechanism was verified for the SLIC system at the nanoscale. As for the hybrid SLIC, PEO chains enhance the segmental mobility of the ether-chains bonded with Al atoms, improve the ionicity, and provide extra ionic paths for Li transfer, resulting in the optimized Li-ion migration kinetics of LiAl-PEG/PEO.

Temperature Effect on Co-Based Catalysts in Oxygen Evolution Reaction.

Oxygen evolution reaction (OER), as the critical step in splitting water, is a thermodynamically "up-hill" process and requires highly efficient catalysts to run. Arrhenius' law suggests that the higher temperature, the faster the reaction rate, so that a larger OER current density can be achieved at a lower η. Herein, we report an abnormal temperature effect on the performance of Co-based catalysts, e.g., Co3O4, Li2CoSiO4, and Fe-doped Co(OH) x, in OER in alkaline electrolytes. The OER performance reached a maximum when the temperature increased to 65 °C, and the OER performance declined when the temperature became higher. The mechanism was investigated by using Co3O4 as a model sample, and we propose that at an optimal temperature (around 55-65 °C) the main rate-determining step changes from OH- adsorption dominant to a mixed mode and both the adsorption and the cleavage of the OH group can be rate-determining, which leads to the fastest kinetics.

A Metal-Organic-Framework-Based Electrolyte with Nanowetted Interfaces for High-Energy-Density Solid-State Lithium Battery.

Solid-state batteries (SSBs) are promising for safer energy storage, but their active loading and energy density have been limited by large interfacial impedance caused by the poor Li+ transport kinetics between the solid-state electrolyte and the electrode materials. To address the interfacial issue and achieve higher energy density, herein, a novel solid-like electrolyte (SLE) based on ionic-liquid-impregnated metal-organic framework nanocrystals (Li-IL@MOF) is reported, which demonstrates excellent electrochemical properties, including a high room-temperature ionic conductivity of 3.0 × 10-4 S cm-1 , an improved Li+ transference number of 0.36, and good compatibilities against both Li metal and active electrodes with low interfacial resistances. The Li-IL@MOF SLE is further integrated into a rechargeable Li|LiFePO4 SSB with an unprecedented active loading of 25 mg cm-2 , and the battery exhibits remarkable performance over a wide temperature range from -20 up to 150 °C. Besides the intrinsically high ionic conductivity of Li-IL@MOF, the unique interfacial contact between the SLE and the active electrodes owing to an interfacial wettability effect of the nanoconfined Li-IL guests, which creates an effective 3D Li+ conductive network throughout the whole battery, is considered to be the key factor for the excellent performance of the SSB.

Co3O4-δ Quantum Dots As a Highly Efficient Oxygen Evolution Reaction Catalyst for Water Splitting.

Co3O4-δ quantum dots (Co3O4-δ-QDs) with a crystallite size of approximately 2 nm and oxygen vacancies were fabricated through multicycle lithiation/delithiation of mesoporous Co3O4 nanosheets. Used as an oxygen evolution reaction (OER) electrocatalyst for water splitting, the catalytic performance (an overpotential of 270 mV@10 mA cm-2 and no decay within 30 h) of Co3O4-δ-QDs is superior to that of previously reported Co-based catalysts and the state-of-the-art IrO2. Compared to that of the Co3O4 nanosheets, the enhanced OER activity of Co3O4-δ-QDs is attributed to two factors: one is the increased quantity of the Faradaic active sites, including the total active sites (q*Total), the most accessible active sites (q*Outer), and their ratio (q*Outer/q*Total); the other is the enhanced intrinsic electroactivity per active site evaluated by the turnover frequency and the current density normalized by the most accessible active sites (j/q*Outer) related to the OER. This multicycle lithiation/delithiation method can be applied to other transition metal oxides as well, offering a general approach to develop high-performance electrocatalysts for water splitting.

Fast Diffusion of O2 on Nitrogen-Doped Graphene to Enhance Oxygen Reduction and Its Application for High-Rate Zn-Air Batteries.

N-doped graphene (NDG) was investigated for oxygen reduction reaction (ORR) and used as air-electrode catalyst for Zn-air batteries. Electrochemical results revealed a slightly lower kinetic activity but a much larger rate capability for the NDG than commercial 20% Pt/C catalyst. The maximum power density for a Zn-air cell with NDG air cathode reached up to 218 mW cm-2, which is nearly 1.5 times that of its counterpart with the Pt/C (155 mW cm-2). The equivalent diffusion coefficient (DE) of oxygen from electrolyte solution to the reactive sites of NDG was evaluated as about 1.5 times the liquid-phase diffusion coefficient (DL) of oxygen within bulk electrolyte solution. Combined with experiments and ab initio calculations, this seems counterintuitive reverse ORR of NDG versus Pt/C can be rationalized by a spontaneous adsorption and fast solid-state diffusion of O2 on ultralarge graphene surface of NDG to enhance effective ORR on N-doped-catalytic-centers and to achieve high-rate performance for Zn-air batteries.

Fe-Cluster Pushing Electrons to N-Doped Graphitic Layers with Fe3C(Fe) Hybrid Nanostructure to Enhance O2 Reduction Catalysis of Zn-Air Batteries.

Non-noble metal catalysts with catalytic activity toward oxygen reduction reaction (ORR) comparable or even superior to that of Pt/C are extremely important for the wide application of metal-air batteries and fuel cells. Here, we develop a simple and controllable strategy to synthesize Fe-cluster embedded in Fe3C nanoparticles (designated as Fe3C(Fe)) encased in nitrogen-doped graphitic layers (NDGLs) with graphitic shells as a novel hybrid nanostructure as an effective ORR catalyst by directly pyrolyzing a mixture of Prussian blue (PB) and glucose. The pyrolysis temperature was found to be the key parameter for obtaining a stable Fe3C(Fe)@NDGL core-shell nanostructure with an optimized content of nitrogen. The optimized Fe3C(Fe)@NDGL catalyst showed high catalytic performance of ORR comparable to that of the Pt/C (20 wt %) catalyst and better stability than that of the Pt/C catalyst in alkaline electrolyte. According to the experimental results and first principle calculation, the high activity of the Fe3C(Fe)@NDGL catalyst can be ascribed to the synergistic effect of an adequate content of nitrogen doping in graphitic carbon shells and Fe-cluster pushing electrons to NDGL. A zinc-air battery utilizing the Fe3C(Fe)@NDGL catalyst demonstrated a maximum power density of 186 mW cm-2, which is slightly higher than that of a zinc-air battery utilizing the commercial Pt/C catalyst (167 mW cm-2), mostly because of the large surface area of the N-doped graphitic carbon shells. Theoretical calculation verified that O2 molecules can spontaneously adsorb on both pristine and nitrogen doped graphene surfaces and then quickly diffuse to the catalytically active nitrogen sites. Our catalyst can potentially become a promising replacement for Pt catalysts in metal-air batteries and fuel cells.

The synergistic effect achieved by combining different nitrogen-doped carbon shells for high performance capacitance.

Ellipsoid nitrogen-doped hollow carbon shells with different nitrogen contents and electrical conductivities were prepared using a simple calcination method by regulating the calcination temperature. Although a high nitrogen content promotes pseudocapacitance, it reduces the electrical conductivity of carbon, causing loss of capacitance. The best rate performance was achieved by a mixture of two types of ellipsoid nitrogen-doped hollow carbon shells, in which one contains a higher level of nitrogen with lower conductivity and higher pseudocapacitance, while the other contains a relatively lower level of nitrogen with higher conductivity. The enhanced performance can be explained by the synergistic effect of one component providing high pseudocapacitance and the other component serving as a highly electrically conductive network, which leads to activation of "nitrogen" to enhance pseudocapacitance performance. The mixed material showed a specific capacitance of 156.9 F g-1 at a high current density of 10 A g-1, with no degradation after 10 000 cycles.