Cubic Iodide Lix YI3+x Superionic Conductors through Defect Manipulation for All-Solid-State Li Batteries.

Halide solid electrolytes (SEs) have attracted significant attention due to their competitive ionic conductivity and good electrochemical stability. Among typical halide SEs (chlorides, bromides, and iodides), substantial efforts have been dedicated to chlorides or bromides, with iodide SEs receiving less attention. Nevertheless, compared with chlorides or bromides, iodides have both a softer Li sublattice and lower reduction limit, which enable iodides to possess potentially high ionic conductivity and intrinsic anti-reduction stability, respectively. Herein, we report a new series of iodide SEs: Lix YI3+x (x=2, 3, 4, or 9). Through synchrotron X-ray/neutron diffraction characterizations and theoretical calculations, we revealed that the Lix YI3+x SEs belong to the high-symmetry cubic structure, and can accommodate abundant vacancies. By manipulating the defects in the iodide structure, balanced Li-ion concentration and generated vacancies enables an optimized ionic conductivity of 1.04 × 10-3  S cm-1 at 25 °C for Li4 YI7 . Additionally, the promising Li-metal compatibility of Li4 YI7 is demonstrated via electrochemical characterizations (particularly all-solid-state Li-S batteries) combined with interface molecular dynamics simulations. Our study on iodide SEs provides deep insights into the relation between high-symmetry halide structures and ionic conduction, which can inspire future efforts to revitalize halide SEs.

Amorphous Oxyhalide Matters for Achieving Lithium Superionic Conduction.

The recently surged halide-based solid electrolytes (SEs) are great candidates for high-performance all-solid-state batteries (ASSBs), due to their decent ionic conductivity, wide electrochemical stability window, and good compatibility with high-voltage oxide cathodes. In contrast to the crystalline phases in halide SEs, amorphous components are rarely understood but play an important role in Li-ion conduction. Here, we reveal that the presence of amorphous component is common in halide-based SEs that are prepared via mechanochemical method. The fast Li-ion migration is found to be associated with the local chemistry of the amorphous proportion. Taking Zr-based halide SEs as an example, the amorphization process can be regulated by incorporating O, resulting in the formation of corner-sharing Zr-O/Cl polyhedrons. This structural configuration has been confirmed through X-ray absorption spectroscopy, pair distribution function analyses, and Reverse Monte Carlo modeling. The unique structure significantly reduces the energy barriers for Li-ion transport. As a result, an enhanced ionic conductivity of (1.35 ± 0.07) × 10-3 S cm-1 at 25 °C can be achieved for amorphous Li3ZrCl4O1.5. In addition to the improved ionic conductivity, amorphization of Zr-based halide SEs via incorporation of O leads to good mechanical deformability and promising electrochemical performance. These findings provide deep insights into the rational design of desirable halide SEs for high-performance ASSBs.

Atomically Dispersed Mg-N-C Material Supported Highly Crystalline Pt3Mg Nanoalloys for Efficient Oxygen Reduction Reaction.

Single-atom or atomically dispersed metal materials have emerged as highly efficient catalysts, but their potential as excellent supports has rarely been reported. In this work, we prepared Mg-N-C materials derived from annealing of a Mg-based metal-organic framework (MOF). By introducing Pt, Mg-N-C not only serves as a platform for anchoring Pt nanoparticles but also facilitates the integration of Mg into the Pt face-centered cubic lattice, resulting in the formation of highly crystalline Pt3Mg nanoalloys via the metal-support interfacial interaction. Synchrotron radiation-based X-ray absorption spectroscopy (XAS) enables us to study the interfacial interaction and the surface electronic structure of this intricate system. The formation of Pt3Mg nanoalloys induces a downshift of the Pt d-band (gaining d-charge), as revealed by the decrease in the Pt L3-edge white-line (WL) area under the curve. This downshift can weaken the binding of oxygen reduction reaction (ORR) intermediates, hence improving the ORR performance.

A family of oxychloride amorphous solid electrolytes for long-cycling all-solid-state lithium batteries.

Solid electrolyte is vital to ensure all-solid-state batteries with improved safety, long cyclability, and feasibility at different temperatures. Herein, we report a new family of amorphous solid electrolytes, xLi2O-MCly (M = Ta or Hf, 0.8 ≤ x ≤ 2, y = 5 or 4). xLi2O-MCly amorphous solid electrolytes can achieve desirable ionic conductivities up to 6.6 × 10-3 S cm-1 at 25 °C, which is one of the highest values among all the reported amorphous solid electrolytes and comparable to those of the popular crystalline ones. The mixed-anion structural models of xLi2O-MCly amorphous SEs are well established and correlated to the ionic conductivities. It is found that the oxygen-jointed anion networks with abundant terminal chlorines in xLi2O-MCly amorphous solid electrolytes play an important role for the fast Li-ion conduction. More importantly, all-solid-state batteries using the amorphous solid electrolytes show excellent electrochemical performance at both 25 °C and -10 °C. Long cycle life (more than 2400 times of charging and discharging) can be achieved for all-solid-state batteries using the xLi2O-TaCl5 amorphous solid electrolyte at 400 mA g-1, demonstrating vast application prospects of the oxychloride amorphous solid electrolytes.

Superionic Conducting Halide Frameworks Enabled by Interface-Bonded Halides.

The revival of ternary halides Li-M-X (M = Y, In, Zr, etc.; X = F, Cl, Br) as solid-state electrolytes (SSEs) shows promise in realizing practical solid-state batteries due to their direct compatibility toward high-voltage cathodes and favorable room-temperature ionic conductivities. Most of the reported superionic halide SSEs have a structural pattern of [MCl6]x- octahedra and generate a tetrahedron-assisted Li+ ion diffusion pathway. Here, we report a new class of zeolite-like halide frameworks, SmCl3, for example, in which 1-dimensional channels are enclosed by [SmCl9]6- tricapped trigonal prisms to provide a short jumping distance of 2.08 Å between two octahedra for Li+ ion hopping. The fast Li+ diffusion along the channels is verified through ab initio molecular dynamics simulations. Similar to zeolites, the SmCl3 framework can be grafted with halide species to obtain mobile ions without altering the base structure, achieving an ionic conductivity over 10-4 S cm-1 at 30 °C with LiCl as the adsorbent. Moreover, the universality of the interface-bonding behavior and ionic diffusion in a class of framework materials is demonstrated. It is suggested that the ionic conductivity of the MCl3/halide composite (M = La-Gd) is likely in correlation with the ionic conductivity of the grafted halide species, interfacial bonding, and framework composition/dimensions. This work reveals a potential class of halide structures for superionic conductors and opens up a new frontier for constructing zeolite-like frameworks in halide-based materials, which will promote the innovation of superionic conductor design and contribute to a broader selection of halide SSEs.

Unveiling the Local Structure and Electronic Properties of PdBi Surface Alloy for Selective Hydrogenation of Propyne.

Building a reliable relationship between the electronic structure of alloyed metallic catalysts and catalytic performance is important but remains challenging due to the interference from many entangled factors. Herein, a PdBi surface alloy structural model, by tuning the deposition rate of Bi atoms relative to the atomic interdiffusion rate at the interface, realizes a continuous modulation of the electronic structure of Pd. Using advanced X-ray characterization techniques, we provide a precise depiction of the electronic structure of the PdBi surface alloy. As a result, the PdBi catalysts show enhanced propene selectivity compared with the pure Pd catalyst in the selective hydrogenation of propyne. The prevented formation of saturated ß-hydrides in the subsurface layers and weakened propene adsorption on the surface contribute to the high selectivity. Our work provides in-depth understanding of the electronic properties of surface alloy structure and underlies the study of the electronic structure-performance relationship in bimetallic catalysts.

Strain and ligand effects in Pt-Ni alloys studied by valence-to-core X-ray emission spectroscopy.

Experimental detection of the Pt 5d densities of states in the valence band is conducted on a series of Pt-Ni alloys by high energy resolution valence-to-core X-ray emission spectroscopy (VTC-XES) at the Pt L3-edge. VTC-XES measurements reveal that the Pt d-band centroid shifts away from the Fermi level upon dilution, accompanied by concentration-dependent Pt d-band width. The competition between the strain effect and ligand effect is observed experimentally for the first time. It is found that the d-band widths in Pt3Ni and PtNi are broader than that of Pt metal due to compressive strain which overcompensates the effect of dilution, while it is narrower in PtNi3 where the ligand effect dominates. VTC-XES is demonstrated to be a powerful tool to study the Pt d-band contribution to the valence band of Pt-based bimetallic. The implication for the enhanced activity of Pt-Ni catalysts in oxygen reduction reaction is discussed.

Bismuth Oxyhydroxide-Pt Inverse Interface for Enhanced Methanol Electrooxidation Performance.

Developing efficient Pt-based electrocatalysts for the methanol oxidation reaction (MOR) is of pivotal importance for large-scale application of direct methanol fuel cells (DMFCs), but Pt suffers from severe deactivation brought by the carbonaceous intermediates such as CO. Here, we demonstrate the formation of a bismuth oxyhydroxide (BiOx(OH)y)-Pt inverse interface via electrochemical reconstruction for enhanced methanol oxidation. By combining density functional theory calculations, X-ray absorption spectroscopy, ambient pressure X-ray photoelectron spectroscopy, and electrochemical characterizations, we reveal that the BiOx(OH)y-Pt inverse interface can induce the electron deficiency of neighboring Pt; this would result in weakened CO adsorption and strengthened OH adsorption, thereby facilitating the removal of the poisonous intermediates and ensuring the high activity and good stability of Pt2Bi sample. This work provides a comprehensive understanding of the inverse interface structure and deep insight into the active sites for MOR, offering great opportunities for rational fabrication of efficient electrocatalysts for DMFCs.

Enhanced multi-carbon alcohol electroproduction from CO via modulated hydrogen adsorption.

Multi-carbon alcohols such as ethanol are valued as fuels in view of their high energy density and ready transport. Unfortunately, the selectivity toward alcohols in CO2/CO electroreduction is diminished by ethylene production, especially when operating at high current densities (>100 mA cm-2). Here we report a metal doping approach to tune the adsorption of hydrogen at the copper surface and thereby promote alcohol production. Using density functional theory calculations, we screen a suite of transition metal dopants and find that incorporating Pd in Cu moderates hydrogen adsorption and assists the hydrogenation of C2 intermediates, providing a means to favour alcohol production and suppress ethylene. We synthesize a Pd-doped Cu catalyst that achieves a Faradaic efficiency of 40% toward alcohols and a partial current density of 277 mA cm-2 from CO electroreduction. The activity exceeds that of prior reports by a factor of 2.

Tracking the interaction of drug molecules with individual mesoporous amorphous calcium phosphate/ATP nanocomposites - an X-ray spectromicroscopy study.

Adenosine triphosphate (ATP) biomolecules play critial roles in the biomineralization process during the formation of amorphous calcium phosphate composites (ACPC), and ACPC is an important drug carrier due to its significant advantages of biocompatibility and biodegradability. Hence, studying the behavior of ACPC nanodrug carriers is crucial to investigate the structural regulation of biomimetic minerals and calcium phosphate (CaP)-based drug delivery systems. However, it is difficult to probe these interactions using traditional characterization methods. In this paper, XANES analysis together with STXM successfully provided a method to reveal the interaction of ATP and drug molecules with individual mesoporous ACPC. We found that the adenosine and phosphate groups of ATP biomolecules coordinated with Ca2+ and played critical roles in the formation of ACPC; drug molecules with the -COOH groups were linked to Ca2+via carboxylic acid groups primarily by electrostatic interactions, and the N-containing ring structures within the drug molecules also coordinated with Ca2+.

Atomic layer deposited Pt-Ru dual-metal dimers and identifying their active sites for hydrogen evolution reaction.

Single atom catalysts exhibit particularly high catalytic activities in contrast to regular nanomaterial-based catalysts. Until recently, research has been mostly focused on single atom catalysts, and it remains a great challenge to synthesize bimetallic dimer structures. Herein, we successfully prepare high-quality one-to-one A-B bimetallic dimer structures (Pt-Ru dimers) through an atomic layer deposition (ALD) process. The Pt-Ru dimers show much higher hydrogen evolution activity (more than 50 times) and excellent stability compared to commercial Pt/C catalysts. X-ray absorption spectroscopy indicates that the Pt-Ru dimers structure model contains one Pt-Ru bonding configuration. First principle calculations reveal that the Pt-Ru dimer generates a synergy effect by modulating the electronic structure, which results in the enhanced hydrogen evolution activity. This work paves the way for the rational design of bimetallic dimers with good activity and stability, which have a great potential to be applied in various catalytic reactions.

Author Correction: Atomic layer deposited Pt-Ru dual-metal dimers and identifying their active sites for hydrogen evolution reaction.

An amendment to this paper has been published and can be accessed via a link at the top of the paper.

Investigating the luminescence mechanism of Mn-doped CsPb(Br/Cl)3 nanocrystals.

Inorganic lead halide perovskite CsPbX3 (X = Cl, Br, or I) nanocrystals are promising candidate materials for light-emitting devices and optoelectronics. Mn-Doped CsPbX3 is of particular interest, as the Mn-doping introduces an additional emission band, making this material a promising white-light emitter. In this study, Mn-doped CsPb(Br/Cl)3 nanocrystals are prepared at room-temperature and ambient pressure. The chemical environment of Mn, and the luminescence of these nanocrystals are analyzed in detail using X-ray diffraction (XRD), extended X-ray absorption fine structure (EXAFS), X-ray absorption near-edge structure (XANES) and X-ray excited optical luminescence (XEOL). Although the introduction of Mn does not alter the long-range order of the CsPbX3 crystal, it leads to a local lattice contraction with the bond length of Mn-X much shorter than Pb-X. We also find excitation energy-dependence in both the intensity and wavelength of the perovskite excitonic emission band, while only in intensity of the Mn emission band. Detailed fitting of the XEOL reveals that the perovskite emission band is dual-channel, and it is the excitation energy-dependent intensity variation of these two channels that drives the observed red-shift of the combined emission band. Our findings also confirm that the Mn emission band is driven by exciton-Mn energy transfer and clarify the Mn chemical environment and the luminescence mechanism in Mn-doped CsPb(Br/Cl)3 nanocrystals.