In Situ Quantitative Monitoring of Adsorption from Aqueous Phase by UV-vis Spectroscopy: Implication for Understanding of Heterogeneous Processes.

The development of in situ techniques to quantitatively characterize the heterogeneous reactions is essential for understanding physicochemical processes in aqueous phase. In this work, a new approach coupling in situ UV-vis spectroscopy with a two-step algorithm strategy is developed to quantitatively monitor heterogeneous reactions in a compact closed-loop incorporation. The algorithm involves the inverse adding-doubling method for light scattering correction and the multivariate curve resolution-alternating least squares (MCR-ALS) method for spectral deconvolution. Innovatively, theoretical spectral simulations are employed to connect MCR-ALS solutions with chemical molecular structural evolution without prior information for reference spectra. As a model case study, the aqueous adsorption kinetics of bisphenol A onto polyamide microparticles are successfully quantified in a one-step UV-vis spectroscopic measurement. The practical applicability of this approach is confirmed by rapidly screening a superior adsorbent from commercial materials for antibiotic wastewater adsorption treatment. The demonstrated capabilities are expected to extend beyond monitoring adsorption systems to other heterogeneous reactions, significantly advancing UV-vis spectroscopic techniques toward practical integration into automated experimental platforms for probing aqueous chemical processes and beyond.

Circumventing bottlenecks in H2O2 photosynthesis over carbon nitride with iodine redox chemistry and electric field effects.

Artificial photosynthesis using carbon nitride (g-C3N4) holds a great promise for sustainable and cost-effective H2O2 production, but the high carrier recombination rate impedes its efficiency. To tackle this challenge, we propose an innovative method involving multispecies iodine mediators (I-/I3-) intercalation through a pre-photo-oxidation process using potassium iodide (suspected deteriorated "KI") within the g-C3N4 framework. Moreover, we introduce an external electric field by incorporating cationic methyl viologen ions to establish an auxiliary electron transfer channel. Such a unique design drastically improves the separation of photo-generated carriers, achieving an impressive H2O2 production rate of 46.40 mmol g-1 h-1 under visible light irradiation, surpassing the most visible-light H2O2-producing systems. Combining various advanced characterization techniques elucidates the inner photocatalytic mechanism, and the application potential of this photocatalytic system is validated with various simulation scenarios. This work presents a significative strategy for preparing and applying highly efficient g-C3N4-based catalysts in photochemical H2O2 production.

Ultrathin cobalt-based nanosheets containing surface oxygen promoted near-complete nitrate removal.

Electrocatalytic nitrate removal offers a sustainable approach to alleviate nitrate pollution and to boost the anthropogenic nitrogen cycle, but it still suffers from limited removal efficiency at high rates, especially at low levels of nitrate. Herein, we report the near-complete removal of low-level nitrate (10-200 ppm) within 2 h using ultrathin cobalt-based nanosheets (CoNS) containing surface oxygen, which was fabricated from in-situ electrochemical reconstruction of conventional nanosheets. The average nitrate removal of 99.7 % with ammonia selectivity of 98.2 % in 9 cyclic runs ranked in the best of reported catalysts. Powered by a solar cell under the winter sun, the full-cell nitrate electrolysis system, equipped with ultrathin CoNS, achieved 100 % nitrogen gas selectivity and 99.6 % total nitrogen removal. The in-situ Fourier Transform Infrared included experiments and theoretical computations revealed that in-situ electrochemical reconstruction not only increased electrochemical active surface area but also constructed surface oxygen in active sites, leading to enhanced stabilization of nitrate adsorption in a symmetry breaking configuration and charge transfer, contributing to near-complete nitrate removal on ultrathin CoNS. This work provides a strategy to design ultrathin nanocatalysts for nitrate removal.

Nanoconfinement steers nonradical pathway transition in single atom fenton-like catalysis for improving oxidant utilization.

The introduction of single-atom catalysts (SACs) into Fenton-like oxidation promises ultrafast water pollutant elimination, but the limited access to pollutants and oxidant by surface catalytic sites and the intensive oxidant consumption still severely restrict the decontamination performance. While nanoconfinement of SACs allows drastically enhanced decontamination reaction kinetics, the detailed regulatory mechanisms remain elusive. Here, we unveil that, apart from local enrichment of reactants, the catalytic pathway shift is also an important cause for the reactivity enhancement of nanoconfined SACs. The surface electronic structure of cobalt site is altered by confining it within the nanopores of mesostructured silica particles, which triggers a fundamental transition from singlet oxygen to electron transfer pathway for 4-chlorophenol oxidation. The changed pathway and accelerated interfacial mass transfer render the nanoconfined system up to 34.7-fold higher pollutant degradation rate and drastically raised peroxymonosulfate utilization efficiency (from 61.8% to 96.6%) relative to the unconfined control. It also demonstrates superior reactivity for the degradation of other electron-rich phenolic compounds, good environment robustness, and high stability for treating real lake water. Our findings deepen the knowledge of nanoconfined catalysis and may inspire innovations in low-carbon water purification technologies and other heterogeneous catalytic applications.

Tailoring the selective generation of oxidative organic radicals for toxic-by-product-free water decontamination.

Peracetic acid (PAA) is emerging as a versatile agent for generating long-lived and selectively oxidative organic radicals (R-O•). Currently, the conventional transition metal-based activation strategies still suffer from metal ion leaching, undesirable by-products formation, and uncontrolled reactive species production. To address these challenges, we present a method employing BiOI with a unique electron structure as a PAA activator, thereby predominantly generating CH3C(O)O• radicals. The specificity of CH3C(O)O• generation ensured the superior performance of the BiOI/PAA system across a wide pH range (2.0 to 11.0), even in the presence of complex interfering substances such as humic acids, chloride ions, bicarbonate ions, and real-world water matrices. Unlike conventional catalytic oxidative methods, the BiOI/PAA system degrades sulfonamides without producing any toxic by-products. Our findings demonstrate the advantages of CH3C(O)O• in water decontamination and pave the way for the development of eco-friendly water decontaminations based on organic peroxides.

Tailoring d-band center of high-valent metal-oxo species for pollutant removal via complete polymerization.

Polymerization-driven removal of pollutants in advanced oxidation processes (AOPs) offers a sustainable way for the simultaneous achievement of contamination abatement and resource recovery, supporting a low-carbon water purification approach. However, regulating such a process remains a great challenge due to the insufficient microscopic understanding of electronic structure-dependent reaction mechanisms. Herein, this work probes the origin of catalytic pollutant polymerization using a series of transition metal (Cu, Ni, Co, and Fe) single-atom catalysts and identifies the d-band center of active site as the key driver for polymerization transfer of pollutants. The high-valent metal-oxo species, produced via peroxymonosulfate activation, are found to trigger the pollutant removal via polymerization transfer. Phenoxyl radicals, identified by the innovative spin-trapping and quenching approaches, act as the key intermediate in the polymerization reactions. More importantly, the oxidation capacity of high-valent metal-oxo species can be facilely tuned by regulating their binding strength for peroxymonosulfate through d-band center modulation. A 100% polymerization transfer ratio is achieved by lowering the d-band center. This work presents a paradigm to dynamically modulate the electronic structure of high-valent metal-oxo species and optimize pollutant removal from wastewater via polymerization.

Reduced Lattice Constant in Al-Doped LiMn2O4 Nanoparticles for Boosted Electrochemical Lithium Extraction.

Extracting lithium selectively and efficiently from brine sources is crucial for addressing energy and environmental challenges. The electrochemical system employing LiMn2O4 (LMO) electrodes has been recognized as an effective method for lithium recovery. However, the lithium selectivity and stability of LMO need further enhancement for its practical applications. Herein, the Al-doped LMO with reduced lattice constant is successfully fabricated through a facile one-step solid-state sintering method, leading to enhanced lithium selectivity. The reduced lattice constant in Al-doped LMO is proved through spectroscopic analyses and theoretic calculations. Compared to the original LMO, the Al-doped LMO (LiAl0.05Mn1.95O4, LMO-Al0.05) exhibits highercapacitance, lower resistance, and improved stability. Moreover, the LMO-Al0.05 with reduced lattice constant can offer higher Li+ diffusion coefficient and lower intercalation energy revealed by cyclic voltammetry and multiscale simulations. When employed in hybrid capacitive deionization (CDI), the LMO-Al0.05 obtains a Li+ intercalation capacity of 21.7 mg g-1 and low energy consumption of 2.6 Wh mol-1 Li+. Importantly, the LMO-Al0.05 achieves a high Li+ extraction percentage (≈86%) with Li+/Na+ and Li+/Mg2+ selectivity of 1653.8 and 434.9, respectively, in synthetic brine. The results demonstrate that the Al-doped LMO with reduced lattice constant could be a sustainable solution for electrochemical lithium extraction.

Constructing sulfur and oxygen super-coordinated main-group electrocatalysts for selective and cumulative H2O2 production.

Direct electrosynthesis of hydrogen peroxide (H2O2) via the two-electron oxygen reduction reaction presents a burgeoning alternative to the conventional energy-intensive anthraquinone process for on-site applications. Nevertheless, its adoption is currently hindered by inferior H2O2 selectivity and diminished H2O2 yield induced by consecutive H2O2 reduction or Fenton reactions. Herein, guided by theoretical calculations, we endeavor to overcome this challenge by activating a main-group Pb single-atom catalyst via a local micro-environment engineering strategy employing a sulfur and oxygen super-coordinated structure. The main-group catalyst, synthesized using a carbon dot-assisted pyrolysis technique, displays an industrial current density reaching 400 mA cm-2 and elevated accumulated H2O2 concentrations (1358 mM) with remarkable Faradaic efficiencies. Both experimental results and theoretical simulations elucidate that S and O super-coordination directs a fraction of electrons from the main-group Pb sites to the coordinated oxygen atoms, consequently optimizing the *OOH binding energy and augmenting the 2e- oxygen reduction activity. This work unveils novel avenues for mitigating the production-depletion challenge in H2O2 electrosynthesis through the rational design of main-group catalysts.

Interfacial Electron Transfer in Chemical and Biological Transformation of Pollutants in Environmental Catalysis.

Interfacial electron transfer (IET) is essential for chemical and biological transformation of pollutants, operative across diverse lengths and time scales. This Perspective presents an array of multiscale molecular simulation methodologies, supplemented by in situ monitoring and imaging techniques, serving as robust tools to decode IET enhancement mechanisms such as interface molecular modification, catalyst coordination mode, and atomic composition regulation. In addition, three IET-based pollutant transformation systems, an electrocatalytic oxidation system, a bioelectrochemical spatial coupling system, and an enzyme-inspired electrocatalytic system, were developed, demonstrating a high effect in transforming and degrading pollutants. To improve the effectiveness and scalability of IET-based strategies, the refinement of these systems is necessitated through rigorous research and theoretical exploration, particularly in the context of practical wastewater treatment scenarios. Future endeavors aim to elucidate the synergy between biological and chemical modules, edit the environmental functional microorganisms, and harness machine learning for designing advanced environmental catalysts to boost efficiency. This Perspective highlights the powerful potential of IET-focused environmental remediation strategies, emphasizing the critical role of interdisciplinary research in addressing the urgent global challenge of water pollution.

Molecular insights into complexation between protein and silica: Spectroscopic and simulation investigations.

The synergistic effect of protein-silica complexation leads to exacerbated membrane fouling in the membrane desalination process, exceeding the individual impacts of silica scaling or protein fouling. However, the molecular-level dynamics of silica binding to proteins and the resulting structural changes in both proteins and silica remain poorly understood. This study investigates the complexation process between silica and proteins-negatively charged bovine serum albumin (BSA) and positively charged lysozyme (LYZ) at neutral pH-using infrared spectroscopy (IR), in situ attenuated total reflection Fourier transform infrared spectroscopy (ATR-FTIR), and multiple computational simulations. The findings reveal that both protein and silica structures undergo changes during the complexation process, with calcium ions in the solution significantly exacerbating these alterations. In particular, in situ ATR-FTIR combined with two-dimensional correlation spectroscopy analysis shows that BSA experiences more pronounced unfolding, providing additional binding sites for silica adsorption compared to LYZ. The adsorbed proteins promote silica polymerization from lower-polymerized to higher-polymerized species. Furthermore, molecular dynamics simulations demonstrate greater conformational variation in BSA through root-mean-square-deviation analysis and the bridging role of calcium ions via mean square displacement analysis. Molecular docking and density functional theory calculations identify the binding sites and energy of silica on proteins. In summary, this research offers a comprehensive understanding of the protein-silica complexation process, contributing to the knowledge of synergistic behaviors of inorganic scaling and organic fouling on membrane surfaces. The integrated approach used here may also be applicable for exploring other complex complexation processes in various environments.

Unraveling heterogeneity of dissolved organic matter in highly connected natural water bodies at molecular level.

The exploring of molecular-level heterogeneity of dissolved organic matter (DOM) in highly connected water bodies is of great importance for pollution tracing and lake management, and provides new perspectives on the transformations and fate of DOM in aquatic systems. However, the inherent homogeneity of DOM in connected water bodies poses challenges for its heterogeneity analysis. In this work, an innovative method combining fluorescence spectroscopy, high-resolution mass spectrometry (HRMS), and cluster analysis was developed to reveal the heterogeneity of DOM in highly connected water bodies at the molecular level. We detected 4538 molecules across 36 sampling sites in Chaohu Lake using HRMS. Cluster analysis based on excitation-emission matrix (EEM) data effectively divided the sampling sites into four clusters, representing the water bodies from West Chaohu Lake, East Chaohu Lake, agricultural land, and urban areas. Analysis of DOM in the western and eastern parts of the lake revealed that aerobic degradation led to a decrease in CHOS and aliphatic compounds, alongside an increase in CHO and highly unsaturated and phenolic compounds. Furthermore, we unveiled the characteristics and sources of heterogeneity in DOM from agricultural land and urban areas. Our method accurately captured the heterogeneous distribution of DOM in the lake and revealed the heterogeneous composition of DOM at molecular level. This work underscores the importance of integrating complementary spectroscopic analyses with HRMS in DOM research with similar compositions.

Engineering of Local Coordination Microenvironment in Single-Atom Catalysts Enabling Sustainable Conversion of Biomass into a Broad Range of Amines.

Utilizing renewable biomass as a substitute for fossil resources to produce high-value chemicals with a low carbon footprint is an effective strategy for achieving a carbon-neutral society. Production of chemicals via single-atom catalysis is an attractive proposition due to its remarkable selectivity and high atomic efficiency. In this work, a supramolecular-controlled pyrolysis strategy is employed to fabricate a palladium single-atom (Pd1 /BNC) catalyst with B-doped Pd-Nx atomic configuration. Owing to the meticulously tailored local coordination microenvironment, the as-synthesized Pd1 /BNC catalyst exhibits remarkable conversion capability for a wide range of biomass-derived aldehydes/ketones. Thorough characterizations and density functional theory calculations reveal that the highly polar metal-N-B site, formed between the central Pd single atom and its adjacent N and B atoms, promotes hydrogen activation from the donor (reductants) and hydrogen transfer to the acceptor (C═O group), consequently leading to exceptional selectivity. This system can be further extended to directly synthesize various aromatic and furonic amines from renewable lignocellulosic biomass, with their greenhouse gas emission potentials being negative in comparison to those of fossil-fuel resource-based amines. This research presents a highly effective and sustainable methodology for constructing C─N bonds, enabling the production of a diverse array of amines from carbon-neutral biomass resources.

Mimicking reductive dehalogenases for efficient electrocatalytic water dechlorination.

Electrochemical technology is a robust approach to removing toxic and persistent chlorinated organic pollutants from water; however, it remains a challenge to design electrocatalysts with high activity and selectivity as elaborately as natural reductive dehalogenases. Here we report the design of high-performance electrocatalysts toward water dechlorination by mimicking the binding pocket configuration and catalytic center of reductive dehalogenases. Specifically, our designed electrocatalyst is an assembled heterostructure by sandwiching a molecular catalyst into the interlayers of two-dimensional graphene oxide. The electrocatalyst exhibits excellent dechlorination performance, which enhances reduction of intermediate dichloroacetic acid by 7.8 folds against that without sandwich configuration and can selectively generate monochloro-groups from trichloro-groups. Molecular simulations suggest that the sandwiched inner space plays an essential role in tuning solvation shell, altering protonation state and facilitating carbon-chlorine bond cleavage. This work demonstrates the concept of mimicking natural reductive dehalogenases toward the sustainable treatment of organohalogen-contaminated water and wastewater.

Electron Transfer Mechanism at the Interface of Multi-Heme Cytochromes and Metal Oxide.

Electroactive microbial cells have evolved unique extracellular electron transfer to conduct the reactions via redox outer-membrane (OM) proteins. However, the electron transfer mechanism at the interface of OM proteins and nanomaterial remains unclear. In this study, the mechanism for the electron transfer at biological/inorganic interface is investigated by integrating molecular modeling with electrochemical and spectroscopic measurements. For this purpose, a model system composed of OmcA, a typical OM protein, and the hexagonal tungsten trioxide (h-WO3 ) with good biocompatibility is selected. The interfacial electron transfer is dependent mainly on the special molecular configuration of OmcA and the microenvironment of the solvent exposed active center. Also, the apparent electron transfer rate can be tuned by site-directed mutagenesis at the axial ligand of the active center. Furthermore, the equilibrium state of the OmcA/h-WO3 systems suggests that their attachment is attributed to the limited number of residues. The electrochemical analysis of OmcA and its variants reveals that the wild type exhibits the fastest electron transfer rate, and the transient absorption spectroscopy further shows that the axial histidine plays an important role in the interfacial electron transfer process. This study provides a useful approach to promote the site-directed mutagenesis and nanomaterial design for bioelectrocatalytic applications.

Distinguishing homogeneous advanced oxidation processes in bulk water from heterogeneous surface reactions in organic oxidation.

Clarifying the reaction pathways at the solid-water interface and in bulk water solution is of great significance for the design of heterogeneous catalysts for selective oxidation of organic pollutants. However, achieving this goal is daunting because of the intricate interfacial reactions at the catalyst surface. Herein, we unravel the origin of the organic oxidation reactions with metal oxide catalysts, revealing that the radical-based advanced oxidation processes (AOPs) prevail in bulk water but not on the solid catalyst surfaces. We show that such differing reaction pathways widely exist in various chemical oxidation (e.g., high-valent Mn3+ and MnOX) and Fenton and Fenton-like catalytic oxidation (e.g., Fe2+ and FeOCl catalyzing H2O2, Co2+ and Co3O4 catalyzing persulfate) systems. Compared with the radical-based degradation and polymerization pathways of one-electron indirect AOP in homogeneous reactions, the heterogeneous catalysts provide unique surface properties to trigger surface-dependent coupling and polymerization pathways of a two-electron direct oxidative transfer process. These findings provide a fundamental understanding of catalytic organic oxidation processes at the solid-water interface, which could guide the design of heterogeneous nanocatalysts.

Boosted brackish water desalination and water softening by facilely designed MnO2/hierarchical porous carbon as capacitive deionization electrode.

Capacitive deionization (CDI) is a promising technique for brackish water desalination. However, its salt electrosorption capacity is insufficient for practical application yet, and little information is available on hardness ion (Mg2+, Ca2+) removal in CDI. Herein, hierarchical porous carbon (HPC) was prepared from low-cost and renewable microalgae via a simple one-pot approach, and both MnO2/HPC and polyaniline/HPC (PANI/HPC) composites were then synthesized using a facile, one-step hydrothermal method. Compared with the MnO2 electrode, the MnO2/HPC electrode presented an improved hydrophilicity, higher specific capacitance, and lower electrode resistance. The electrodes exhibited pseudocapacitive behaviors, and the maximum salt electrosorption capacities of MnO2/HPC-PANI/HPC CDI cell was up to 0.65 mmol g-1 NaCl, 0.71 mmol g-1 MgCl2, and 0.76 mmol g-1 CaCl2, respectively, which were comparable and even higher than those of the previously reported CDI cells. Additionally, the MnO2/HPC electrode presented a selectivity order of Ca2+ ≥ Mg2+ > Na+, and the divalent cation selectivity was found to be attributed to their stronger binding strength in the cavity of MnO2. Multiscale simulations further reveal that the MnO2/HPC electrodes with the unique luminal configuration of MnO2 and HPC as supportive framework could offer a great intercalation selectivity of the divalent cations and exhibit a great promise in hardness ion removal.

Synergy of crystallinity modulation and intercalation engineering in carbon nitride for boosted H2O2 photosynthesis.

Photosynthesis of hydrogen peroxide (H2O2) by selective oxygen reduction is a green and cost-effective alternative to the energy-intensive anthraquinone process. Although inexpensive polymeric graphitic carbon nitride (g-C3N4) exhibits the ability to produce H2O2, its disordered and amorphous structure leads to a high recombination rate of photogenerated carriers and hinders charge transfer between layers. Herein, we predict that stacked polymeric g-C3N4 with ion intercalation (K+ and I-) can improve carrier separation and transfer by multiscale computational simulations. The electronic structures of g-C3N4 were tailored and modified by intercalating K+ and I- into the layer-by-layer structures. Guided by the computational predictions, we achieved efficient solar-driven H2O2 production by employing this facile and ion-intercalated crystalline g-C3N4. An H2O2 production rate of 13.1 mM g-1 h-1 and an apparent quantum yield of 23.6% at 400 nm were obtained. The synergistic effects of crystallinity regulation and dual interstitial doping engineering triggered the formation of new light absorption centers, the establishment of rapid charge diffusion channels, and the enhancement of two-electron oxygen reduction characteristics. This work sheds light on the dual tuning of crystallinity and electronic structure and broadens the design principles of organic-conjugated polymer photocatalysts for environmental remediation and energy conservation.

Plasmonic imaging of the layer-dependent electrocatalytic activity of two-dimensional catalysts.

Studying the localized electrocatalytic activity of heterogeneous electrocatalysts is crucial for understanding electrocatalytic reactions and further improving their performance. However, correlating the electrocatalytic activity with the microscopic structure of two-dimensional (2D) electrocatalysts remains a great challenge due to the lack of in situ imaging techniques and methods of tuning structures with atomic precision. Here, we present a general method of probing the layer-dependent electrocatalytic activity of 2D materials in situ using a plasmonic imaging technique. Unlike the existing methods, this approach was used to visualize the surface charge density and electrocatalytic activity of single 2D MoS2 nanosheets, enabling the correlation of layer-dependent electrocatalytic activity with the surface charge density of single MoS2 nanosheets. This work provides insights into the electrocatalytic mechanisms of 2D transition metal dichalcogenides, and our approach can serve as a promising platform for investigating electrocatalytic reactions at the heterogeneous interface, thus guiding the rational design of high-performance electrocatalysts.

Single-Atom Iron Anchored Tubular g-C3 N4 Catalysts for Ultrafast Fenton-Like Reaction: Roles of High-Valency Iron-Oxo Species and Organic Radicals.

Single-atom catalysts have emerged as an efficient oxidant activator for eliminating organic pollutants in Fenton-like systems. However, the complex preparation, single active site, lack of understanding of the fundamental mechanism, and harsh pH conditions currently limit their practical applications. In this work, single-atom iron anchored nitrogen-rich g-C3 N4 nanotubes (FeCNs) are designed and synthesized by a facile approach, and eco-friendly peracetic acid (PAA) is selected as the oxidant for Fenton-like reactions. The constructed heterogenous system achieves an enhanced degradation of various organic contaminants over a wide pH range of 3.0-9.0, exhibiting an ultrahigh and stable catalytic activity, outperforming equivalent quantities of pristine g-C3 N4 by 75 times. The 18 O isotope-labeling technique, probe method, and theoretical calculations demonstrate that the efficient catalytic activity relies on the high-valency iron-oxo species coupled with organic radicals generated by PAA. An increase in electron transport from the contaminant to the formed "metastable PAA/FeCN catalyst surface complex" is detected. A double driving mechanism for the tubular g-C3 N4 regulated by a single Fe site and PAA activation is proposed. This work opens an avenue for developing novel catalysts with the coexistence of multiple active units and providing opportunities for significantly improving catalytic efficiency.

Simultaneous nanocatalytic surface activation of pollutants and oxidants for highly efficient water decontamination.

Removal of organic micropollutants from water through advanced oxidation processes (AOPs) is hampered by the excessive input of energy and/or chemicals as well as the large amounts of residuals resulting from incomplete mineralization. Herein, we report a new water purification paradigm, the direct oxidative transfer process (DOTP), which enables complete, highly efficient decontamination at very low dosage of oxidants. DOTP differs fundamentally from AOPs and adsorption in its pollutant removal behavior and mechanisms. In DOTP, the nanocatalyst can interact with persulfate to activate the pollutants by lowering their reductive potential energy, which triggers a non-decomposing oxidative transfer of pollutants from the bulk solution to the nanocatalyst surface. By leveraging the activation, stabilization, and accumulation functions of the heterogeneous catalyst, the DOTP can occur spontaneously on the nanocatalyst surface to enable complete removal of pollutants. The process is found to occur for diverse pollutants, oxidants, and nanocatalysts, including various low-cost catalysts. Significantly, DOTP requires no external energy input, has low oxidant consumption, produces no residual byproducts, and performs robustly in real environmental matrices. These favorable features render DOTP an extremely promising nanotechnology platform for water purification.