Bioinspired Microgel-Loaded Smart Membrane Filtration with the Thermo- and Ion-Dual Responsive Water Gate for Selective Lead(II) Separation.

Lead (Pb2+) is a ubiquitous pollutant. Membrane filtration represents one of the most common water treatment methods, but nanofiltration and ultrafiltration require high transmembrane pressure, while microfiltration has larger pore sizes than ions, making them unfavorable for direct ion removal at low cost. Selective and direct separation of Pb2+ via membrane filtration at high efficiency without sacrificing the flux of clean water still remains challenging. Herein, inspired by the Pb2+-tolerable oleander that enriches and prevents Pb2+ in roots from permeating the plant body, a smart Pb2+-adsorptive filtration membrane with a temperature- and ion-tunable water gate was prepared by loading dual-responsive poly(N-isopropylacrylamido-co-acrylamido-benzo-18-crown-6) (PNB-5-20) microgels onto a commercial membrane. The PNB-5-20 microgel exhibits pronounced temperature-responsive swelling/deswelling (hydrodynamic diameter, 650-330 nm) with a volume phase transition temperature (VPTT) at ∼33 °C. Moreover, the microgel shows a high Pb2+-adsorption capacity (qmax, 85.4 mg/g) and good selectivity (distribution coefficient Kd ∼ 1000 mL/g) thanks to its complexation with the crown ether, as well as good Pb2+ responsiveness, having the VPTT positively shifted to 40 °C in the presence of Pb2+ with enhanced swelling behaviors. Functionalized with PNB-5-20, the smart membrane integrates Pb2+ detection, adsorption, and tunable water drainage in a single device. The membrane selectively recognizes Pb2+ in the polluted water with the gates in membrane pores switching from "open" to "closed", intercepting and adsorbing Pb2+ with water permeation reduced. Once purified, the gates can be "re-opened" by increasing the temperature. Construction of such an intelligent membrane filtration device with a tunable water gate and excellent Pb2+ recognition and adsorption performance will greatly simplify the remediation of Pb2+-polluted water.

Polarization-insensitive multimode interference coupler on an x-cut thin-film lithium niobate platform.

Thin-film lithium niobate (TFLN) is a promising integrated photonics platform but currently lacks a polarization-insensitive multimode interference (MMI) coupler, a crucial component for polarization-related optical communication applications such as polarization management, polarization-division multiplexing, and polarization-insensitive modulation systems. This paper presents a novel, to the best of our knowledge, approach by rotating the MMI structure on an anisotropic x-cut TFLN at specific angles to compensate for the difference in the beat length between the two polarizations. A polarization-insensitive 1 × 2 MMI coupler is experimentally achieved with measured transmittances of -2.5 to -4 dB for both output ports and polarization modes in the wavelength range of 1520-1580 nm.

Effect of cooking methods on volatile compounds and texture properties in millet porridge.

To instruct the production of millet porridge, the effect of cooking methods on flavor and texture of millet porridge was investigated. A total of 91 volatiles were detected and most volatile compounds decreased with cooking time, e.g. alcohols. The esters as major volatiles had a high content in electric rice cooker (IC). Multiple chemometric results indicated that volatiles from different cooking methods were distinguished respectively. Texture analysis indicated that the hardness of millet porridge prepared in IC had a more dominant decrease trend than electromagnetic oven and the electric pressure cooker before 40 min. In conclusion, different cooking methods had a more significant influence on the volatiles than cooking time, while the texture is opposite. The comprehensive sensory score reached its peak in IC-30 min. The comprehensive sensory scores of IC and EC decreased with the prolongation of cooking time. This study helps to improve the sensory attributes of millet porridge.

Correlation of functional magnetic resonance imaging features of primary central nervous system lymphoma with vasculogenic mimicry and reticular fibers.

Objective: To deepen the imaging-pathological mechanism of primary central nervous system lymphoma (PCNSL) and provide a theoretical basis for clinical diagnosis and treatment, the functional magnetic resonance imaging (fMRI) characteristics of PCNSL were analyzed, and the relationship between the fMRI characteristics and vasculogenic mimicry (VM) and reticular fiber in PCNSL was discussed. Methods: Ninety-six patients with PCNSL treated in our hospital were divided into three groups according to the pathological examination results, including strong positive group of VM (n = 40), weak positive group of VM (n = 56), strong positive group of reticular fiber (n = 45) and weak positive group of reticular fiber (n = 51). The levels of augmentation index and apparent diffusion coefficient (ADC) were compared among the groups. receiver operator characteristic (ROC) curve analysis was used to analyze the clinical value of ADC value in differential diagnosis of PCNSL. Results: The levels of augmentation index in the strong positive group of VM were significantly higher than that in the weak positive group of VM, and the ADC value in the strong positive group of VM was significantly lower than that in the weak positive group of VM (P < 0.001). The levels of augmentation index in the strong positive group of reticular fiber were significantly higher than that in the weak positive group of reticular fiber, and ADC value in the strong positive group of reticular fiber was significantly lower than that in reticular fiber weak positive group (P < 0.001). Pearson correlation analysis showed that the levels of augmentation index were positively correlated with VM and reticular fiber (r = 0.529, 0.548, P < 0.001) and the ADC value was negatively correlated with VM and reticular fiber (r = -0.485, -0.513, P < 0.001). There was a significant negative correlation between necrotic lesions and VM (r = -0.185, P < 0.05). The area under the curve (AUC) values of average ADC value, minimum ADC value, and maximum ADC value for individual differential diagnosis of PCNSL were 0.920, 0.901, and 0.702, while the AUC of the combined differential diagnosis was 0.985, with a sensitivity of 95.00 % and a specificity of 92.70 %. Conclusion: The levels of augmentation index and the ADC value of PCNSL focus are significantly correlated with VM and reticular fiber, and there is a strong negative correlation between necrotic lesions and VM. MRI imaging technology is of great significance in revealing the biological behavior of PCNSL, which can effectively reveal the relationship between VM and reticular fibers and the MRI characteristics in PCNSL, thereby providing a new imaging basis for the clinical diagnosis and treatment of PCNSL.

Macrophage-derived extracellular vesicles regulate skeletal stem/progenitor Cell lineage fate and bone deterioration in obesity.

Obesity-induced chronic inflammation exacerbates multiple types of tissue/organ deterioration and stem cell dysfunction; however, the effects on skeletal tissue and the underlying mechanisms are still unclear. Here, we show that obesity triggers changes in the microRNA profile of macrophage-secreted extracellular vesicles, leading to a switch in skeletal stem/progenitor cell (SSPC) differentiation between osteoblasts and adipocytes and bone deterioration. Bone marrow macrophage (BMM)-secreted extracellular vesicles (BMM-EVs) from obese mice induced bone deterioration (decreased bone volume, bone microstructural deterioration, and increased adipocyte numbers) when administered to lean mice. Conversely, BMM-EVs from lean mice rejuvenated bone deterioration in obese recipients. We further screened the differentially expressed microRNAs in obese BMM-EVs and found that among the candidates, miR-140 (with the function of promoting adipogenesis) and miR-378a (with the function of enhancing osteogenesis) coordinately determine SSPC fate of osteogenic and adipogenic differentiation by targeting the Pparα-Abca1 axis. BMM miR-140 conditional knockout mice showed resistance to obesity-induced bone deterioration, while miR-140 overexpression in SSPCs led to low bone mass and marrow adiposity in lean mice. BMM miR-378a conditional depletion in mice led to obesity-like bone deterioration. More importantly, we used an SSPC-specific targeting aptamer to precisely deliver miR-378a-3p-overloaded BMM-EVs to SSPCs via an aptamer-engineered extracellular vesicle delivery system, and this approach rescued bone deterioration in obese mice. Thus, our study reveals the critical role of BMMs in mediating obesity-induced bone deterioration by transporting selective extracellular-vesicle microRNAs into SSPCs and controlling SSPC fate.

Effect of cooking methods on volatile compounds and texture properties in maize porridge.

To investigate the optimal processing of maize porridge, the volatile compounds and texture under different cooking methods and time have been studied. A total of 51 volatile compounds were identified in maize porridge. Notably, the major volatiles, aldehydes and esters exhibited a relatively high content in electric pressure cooker (EPC), and esters tend to significantly increase after cooking. Among aldehydes, nonanal and hexanal played a great role in flavor due to their relatively high content. Volatile compounds of maize porridge in different cooking methods could be clearly distinguished by multiple chemometrics. Furthermore, texture analysis revealed that almost all the indicators in the EPC can reach the lowest value at 60 min. To summarize, different cooking methods had a more significant influence on the volatile compounds and texture compared to time. This study helps to improve the sensory attributes of maize porridge, and thus contributes to healthier and more sustainable production.

Interfacial Layers with Desolvation Function Induced Stable Deposition of Lithium Metal for Long-Cycling Lithium Metal Batteries.

The unstable solid electrolyte interface (SEI) formed by uncontrollable electrolyte degradation, which leads to dendrite growth and Coulombic efficiency decay, hinders the development of Li metal anodes. A controllable desolvation process is essential for the formation of stable SEI and improved lithium metal deposition behavior. Here, we show a functional artificial interface protective layer comprised of chondroitin sulfate-reduced graphene oxide (CrG), on which polar functional groups are distributed to effectively reduce the energy barrier for desolvation of Li+ and effectively alienate solvent molecules to avoid solvent involvement in SEI formation, thus promoting the formation of a LiF-rich SEI. Consequently, stable Coulombic efficiencies of 98.4% were achieved after 500 cycles in a Li//Cu cell. Moreover, the LiFePO4 full cells achieve steady circulation (470 cycles at 80%, 1 C) with a negative/positive electrode capacity ratio of 2.87. Our multifunctional artificial interface protective layer provides a new way to advance Li metal batteries.

Controlled Radical Copolymerization toward Tailored F/N Hybrid Polymers by Using Light-Driven Organocatalysis.

Controlled radical copolymerizations present attractive avenues to obtain polymers with complicated compositions and sequences. In this work, we report the development of a visible-light-driven organocatalyzed controlled copolymerization of fluoroalkenes and acyclic N-vinylamides for the first time. The approach enables the on-demand synthesis of a broad scope of amide-functionalized main-chain fluoropolymers via novel fluorinated thiocarbamates, facilitating regulations over chemical compositions and alternating fractions by rationally selecting comonomer pairs and ratios. This method allows temporally controlled chain-growth by external light, and maintains high chain-end fidelity that promotes facile preparation of block sequences. Notably, the obtained F/N hybrid polymers, upon hydrolysis, afford free amino-substituted fluoropolymers versatile for post modifications toward various functionalities (e.g., amide, sulfonamide, carbamide, thiocarbamide). We further demonstrate the in situ formation of polymer networks with desirable properties as protective layers on lithium metal anodes, presenting a promising avenue for advancing lithium metal batteries.

Theoretical Study of the Decomposition Reactions of 2-Vinylfuran.

With the development of new synthetic methods, 2-vinylfuran (V2F) has become a potential renewable biofuel. In this work, the potential energy surfaces for the V2F unimolecular dissociation reaction, the H-addition reaction, and the H-abstraction reaction were constructed at the G4 level. The temperature- and pressure-dependent rate constants for the relevant reactions on the potential energy surfaces were calculated by solving the master equation based on the transition state theory and Rice-Ramsperger-Kassel-Marcus theory. The results show that the rate constant for the intramolecular H-transfer reaction of V2F with H atoms from the C(5) site to the C(4) site to form 2-vinylfuran-3(2H)-carbene, followed by the decomposition to form h145te3o, is the highest. The rate constants for the H-abstraction reaction of V2F with H atoms were the largest at C(6) on the branched chain, followed by C(7), and the rate constants for the H-abstraction reaction at C(3), C(4), and C(5) on the furan ring were not competitive. Negative temperature coefficient effects are observed for the rate constants of the addition reactions of V2F with H atoms at low pressures, with the H-addition rate constant at the C(5) site being the largest. This work not only provides the necessary rate constants for the reaction mechanism of V2F combustion but also provides theoretical guidance for the practical application of furan-based fuels.

Interaction Pattern Disentangling for Multi-Agent Reinforcement Learning.

Deep cooperative multi-agent reinforcement learning has demonstrated its remarkable success over a wide spectrum of complex control tasks. However, recent advances in multi-agent learning mainly focus on value decomposition while leaving entity interactions still intertwined, which easily leads to over-fitting on noisy interactions between entities. In this work, we introduce a novel interactiOn Pattern disenTangling (OPT) method, to disentangle the entity interactions into interaction prototypes, each of which represents an underlying interaction pattern within a subgroup of the entities. OPT facilitates filtering the noisy interactions between irrelevant entities and thus significantly improves generalizability as well as interpretability. Specifically, OPT introduces a sparse disagreement mechanism to encourage sparsity and diversity among discovered interaction prototypes. Then the model selectively restructures these prototypes into a compact interaction pattern by an aggregator with learnable weights. To alleviate the training instability issue caused by partial observability, we propose to maximize the mutual information between the aggregation weights and the history behaviors of each agent. Experiments on single-task, multi-task and zero-shot benchmarks demonstrate that the proposed method yields results superior to the state-of-the-art counterparts. Our code is available at https://github.com/liushunyu/OPT.

Mechanical protein polycystin-1 directly regulates osteoclastogenesis and bone resorption.

Mechanical loading is required for bone homeostasis, but the underlying mechanism is still unclear. Our previous studies revealed that the mechanical protein polycystin-1 (PC1, encoded by Pkd1) is critical for bone formation. However, the role of PC1 in bone resorption is unknown. Here, we found that PC1 directly regulates osteoclastogenesis and bone resorption. The conditional deletion of Pkd1 in the osteoclast lineage resulted in a reduced number of osteoclasts, decreased bone resorption, and increased bone mass. A cohort study of 32,500 patients further revealed that autosomal dominant polycystic kidney disease, which is mainly caused by loss-of-function mutation of the PKD1 gene, is associated with a lower risk of hip fracture than those with other chronic kidney diseases. Moreover, mice with osteoclast-specific knockout of Pkd1 showed complete resistance to unloading-induced bone loss. A mechanistic study revealed that PC1 facilitated TAZ nuclear translocation via the C-terminal tail-TAZ complex and that conditional deletion of Taz in the osteoclast lineage resulted in reduced osteoclastogenesis and increased bone mass. Pharmacological regulation of the PC1-TAZ axis alleviated unloading- and estrogen deficiency- induced bone loss. Thus, the PC1-TAZ axis may be a potential therapeutic target for osteoclast-related osteoporosis.

The DEP1 Mutation Improves Stem Lodging Resistance and Biomass Saccharification by Affecting Cell Wall Biosynthesis in Rice.

BACKGROUND: Plant cell walls have evolved precise plasticity in response to environmental stimuli. The plant heterotrimeric G protein complexes could sense and transmit extracellular signals to intracellular signaling systems, and activate a series of downstream responses. dep1 (Dense and Erect Panicles 1), the gain-of-function mutation of DEP1 encoding a G protein γ subunit, confers rice multiple improved agronomic traits. However, the effects of DEP1 on cell wall biosynthesis and wall-related agronomic traits remain largely unknown. RESULTS: In this study, we showed that the DEP1 mutation affects cell wall biosynthesis, leading to improved lodging resistance and biomass saccharification. The DEP1 is ubiquitously expressed with a relatively higher expression level in tissues rich in cell walls. The CRISPR/Cas9 editing mutants of DEP1 (dep1-cs) displayed a significant enhancement in stem mechanical properties relative to the wild-type, leading to a substantial improvement in lodging resistance. Cell wall analyses showed that the DEP1 mutation increased the contents of cellulose, hemicelluloses, and pectin, and reduced lignin content and cellulose crystallinity (CrI). Additionally, the dep1-cs seedlings exhibited higher sensitivity to cellulose biosynthesis inhibitors, 2,6-Dichlorobenzonitrile (DCB) and isoxaben, compared with the wild-type, confirming the role of DEP1 in cellulose deposition. Moreover, the DEP1 mutation-mediated alterations of cell walls lead to increased enzymatic saccharification of biomass after the alkali pretreatment. Furthermore, the comparative transcriptome analysis revealed that the DEP1 mutation substantially altered expression of genes involved in carbohydrate metabolism, and cell wall biosynthesis. CONCLUSIONS: Our findings revealed the roles of DEP1 in cell wall biosynthesis, lodging resistance, and biomass saccharification in rice and suggested genetic modification of DEP1 as a potential strategy to develop energy rice varieties with high lodging resistance.

Sharp bend and large FSR ring resonator based on the free-form curves on a thin-film lithium niobate platform.

Sharp bends are crucial for large-scale and high-density photonics integration on thin-film lithium niobate platform. In this study, we demonstrate low-loss (<0.05 dB) and sharp bends (Reff = 30 µm) using free-form curves with a 200-nm-thick slab and a rib height of 200 nm on x-cut lithium niobate. Employing the same design method, we successfully realize a compact fully-etched ring resonator with a remarkably large free spectral range of 10.36 nm experimentally. Notably, the equivalent radius of the ring resonator is a mere 15 µm, with a loaded Q factor reaching 2.2 × 104.

Exosomes derived from mesenchymal stem cells in diabetes and diabetic complications.

Diabetes, a group of metabolic disorders, constitutes an important global health problem. Diabetes and its complications place a heavy financial strain on both patients and the global healthcare establishment. The lack of effective treatments contributes to this pessimistic situation and negative outlook. Exosomes released from mesenchymal stromal cells (MSCs) have emerged as the most likely new breakthrough and advancement in treating of diabetes and diabetes-associated complication due to its capacity of intercellular communication, modulating the local microenvironment, and regulating cellular processes. In the present review, we briefly outlined the properties of MSCs-derived exosomes, provided a thorough summary of their biological functions and potential uses in diabetes and its related complications.

Mechanosensitive protein polycystin-1 promotes periosteal stem/progenitor cells osteochondral differentiation in fracture healing.

Background: Mechanical forces are indispensable for bone healing, disruption of which is recognized as a contributing cause to nonunion or delayed union. However, the underlying mechanism of mechanical regulation of fracture healing is elusive. Methods: We used the lineage-tracing mouse model, conditional knockout depletion mouse model, hindlimb unloading model and single-cell RNA sequencing to analyze the crucial roles of mechanosensitive protein polycystin-1 (PC1, Pkd1) promotes periosteal stem/progenitor cells (PSPCs) osteochondral differentiation in fracture healing. Results: Our results showed that cathepsin (Ctsk)-positive PSPCs are fracture-responsive and mechanosensitive and can differentiate into osteoblasts and chondrocytes during fracture repair. We found that polycystin-1 declines markedly in PSPCs with mechanical unloading while increasing in response to mechanical stimulus. Mice with conditional depletion of Pkd1 in Ctsk+ PSPCs show impaired osteochondrogenesis, reduced cortical bone formation, delayed fracture healing, and diminished responsiveness to mechanical unloading. Mechanistically, PC1 facilitates nuclear translocation of transcriptional coactivator TAZ via PC1 C-terminal tail cleavage, enhancing osteochondral differentiation potential of PSPCs. Pharmacological intervention of the PC1-TAZ axis and promotion of TAZ nuclear translocation using Zinc01442821 enhances fracture healing and alleviates delayed union or nonunion induced by mechanical unloading. Conclusion: Our study reveals that Ctsk+ PSPCs within the callus can sense mechanical forces through the PC1-TAZ axis, targeting which represents great therapeutic potential for delayed fracture union or nonunion.

Contrast-Enhanced Ultrasound and Conventional Ultrasound Characteristics of Breast Cancer With Different Molecular Subtypes.

BACKGROUND: Identifying molecular subtypes of breast cancer (BC) is of great significance in selecting optimal treatment strategy. Different molecular subtypes of BC have various vascular distribution characteristics. Contrast-enhanced ultrasound (CEUS) can dynamically display the microcirculation of tumor. This study intends to explore the conventional ultrasound and CEUS characteristics of different molecular subtypes of BC. METHODS: During this prospective study, 86 patients with BC who were divided into Luminal A (LA), Luminal B (LB), HER2 over-expression (H2), and triple-negative (TN). The CEUS qualitative and quantitative characteristics of BC with different molecular subtypes was explored, as well as the conventional ultrasound features. In addition, the diagnostic efficiency of CEUS quantitative parameters in differentiating molecular subtypes of BC was analyzed. RESULTS: Our study found that the Adler grade differed significantly among 4 molecular subtypes (P < .05). The enhancement speed, enhancement degree and size after enhancement of 4 molecular subtypes were statistically different (P < .05). The wash in slope (WIS), peak intensity (PI), and wash-in area under the curve (WiAUC) differed significantly among 4 subtypes (P < .05). The diagnostic efficiency of PI was better for detecting LA and H2 subtype with the areas under the receiver operating characteristic curve was 0.778 and 0.734, respectively. CONCLUSION: Different molecular subtypes of BC have different CEUS and conventional ultrasound characteristics. CEUS can provide valuable imaging basis for precise clinical diagnosis and individualized therapy of BC with different molecular subtypes.