RESUMO
Real-time tracking and 3D trajectory computation of fast-moving objects is a promising technology, especially in the field of autonomous driving. However, existing image-based tracking methods face significant challenges when it comes to real-time tracking, primarily due to the limitation of storage space and computational resources. Here, we propose a novel approach that enables real-time 3D tracking of a fast-moving object without any prior motion information and at a very low computational cost. To enable 3D coordinate synthesis with a space-efficient optical setup, geometric moment patterns are projected on two non-orthogonal planes with a spatial resolution of 125 µm. Our experiment demonstrates an impressive tracking speed of 6667 frames per second (FPS) with a 20 kHz digital micromirror device (DMD), which is more than 200 times faster than the widely adopted video-based tracking methods. To the best of our knowledge, this is the highest tracking speed record in the field of single-pixel 3D trajectory tracking. This method promotes the development of real-time tracking techniques with single-pixel imaging (SPI).
RESUMO
Recent advances in learning-based computer-generated holography (CGH) have unlocked novel possibilities for crafting phase-only holograms. However, existing approaches primarily focus on the learning ability of network modules, often neglecting the impact of diffraction propagation models. The resulting ringing artifacts, emanating from the Gibbs phenomenon in the propagation model, can degrade the quality of reconstructed holographic images. To this end, we explore a diffraction propagation error-compensation network that can be easily integrated into existing CGH methods. This network is designed to correct propagation errors by predicting residual values, thereby aligning the diffraction process closely with an ideal state and easing the learning burden of the network. Simulations and optical experiments demonstrate that our method, when applied to state-of-the-art HoloNet and CCNN, achieves PSNRs of up to 32.47 dB and 29.53 dB, respectively, surpassing baseline methods by 3.89 dB and 0.62 dB. Additionally, real-world experiments have confirmed a significant reduction in ringing artifacts. We envision this approach being applied to a variety of CGH algorithms, paving the way for improved holographic displays.
RESUMO
The development of two-dimensional metasurfaces has shown great potential in quantum-optical technologies because of the excellent flexibility in light-field manipulation. By integrating a metalens array with a nonlinear crystal, we demonstrate a 100-path spontaneous parametric down-conversion photon-pair source in a 10 × 10 array, which shows promise for high-dimensional entanglement and multiphoton-state generation. We demonstrate two-, three- and four-dimensional two-photon path entanglement with different phases encoded by metalenses with fidelities of 98.4, 96.6, and 95.0%, respectively. Furthermore, four-photon and six-photon generation is observed with high indistinguishability of photons generated from different metalenses. Our metalens-array-based quantum photon source is compact, stable, and controllable, indicating a new platform for integrated quantum devices.
RESUMO
Tomography is an informative imaging modality that is usually implemented by mechanical scanning, owing to the limited depth-of-field (DOF) in conventional systems. However, recent imaging systems are working towards more compact and stable architectures; therefore, developing nonmotion tomography is highly desirable. Here, we propose a metalens-based spectral imaging system with an aplanatic GaN metalens (NA = 0.78), in which large chromatic dispersion is used to access spectral focus tuning and optical zooming in the visible spectrum. After the function of wavelength-switched tomography was confirmed on cascaded samples, this aplanatic metalens is utilized to image microscopic frog egg cells and shows excellent tomographic images with distinct DOF features of the cell membrane and nucleus. Our approach makes good use of the large diffractive dispersion of the metalens and develops a new imaging technique that advances recent informative optical devices.
RESUMO
Enabling laser white-lighting at a correlated color temperature (CCT) of 6500K with the use of only red/green/blue (RGB) tri-color laser diodes (LDs) is demonstrated, which can further perform wavelength division multiplexing (WDM) communication with a high-spectral-usage 16 QAM-OFDM data stream at 11.2 Gbps over 0.5 m. The sampling rate of encoded data is optimized to avoid the aliasing effect and to effectively amplify the signal with high on/off extinction and modulation depth. Proper oversampling can decrease the peak-to-average power ratio (PAPR) of the OFDM data and filter out unwanted noise. There are also six different diffusers used to diverge the white-light mixed by the RGB LD beam. By analyzing the color-casting transmittance, surface roughness, CCT uniformity, divergent angle of the diffuser, and the data transmission capacity, the frosted glass (FG2.8) diffuser with high transmittance diverges the white light with the divergent angle of ± 20° and supports the highest data rate of 14 Gbps over 0.5 m. To fit the day-light CCT, the blue LD power at an optimized bias current is further attenuated with a 0.6-optical density filter for reducing CCT from 100000K to 6500K; however, such an adjustment also degrades the SNR ratio to sacrifice the achievable data rate of the blue LD. The polycarbonate (PC1.5) diffuser with proper surface roughness diverged white-light exhibits the best CCT uniformity and a divergent angle of ± 30° but supports a data rate of only 6.4 Gbps over 0.5 m. The poly (methyl methacrylate) PMMA1.5 diffuser scatters the white light with the largest angle of ± 40°; however, the data rate also decreases to 4.8 Gbps over 0.5 m.
RESUMO
Metalenses consist of an array of optical nanoantennas on a surface capable of manipulating the properties of an incoming light wavefront. Various flat optical components, such as polarizers, optical imaging encoders, tunable phase modulators and a retroreflector, have been demonstrated using a metalens design. An open issue, especially problematic for colour imaging and display applications, is the correction of chromatic aberration, an intrinsic effect originating from the specific resonance and limited working bandwidth of each nanoantenna. As a result, no metalens has demonstrated full-colour imaging in the visible wavelength. Here, we show a design and fabrication that consists of GaN-based integrated-resonant unit elements to achieve an achromatic metalens operating in the entire visible region in transmission mode. The focal length of our metalenses remains unchanged as the incident wavelength is varied from 400 to 660 nm, demonstrating complete elimination of chromatic aberration at about 49% bandwidth of the central working wavelength. The average efficiency of a metalens with a numerical aperture of 0.106 is about 40% over the whole visible spectrum. We also show some examples of full-colour imaging based on this design.