Enhanced Efficiency and Stability of Inverted Perovskite Solar Cells via Primary Amine Molecular Reaction.

The inverted perovskite solar cells have drawn considerable attention owing to their low cost, good compatibility, and easy production processes. However, the device performance is still limited by some important factors, such as surface imperfections and interfacial nonradiative recombination losses. Here, N-acetylethylenediamine (N-AE) is introduced to bind to the surface of the perovskite film via an ammonia condensation reaction. This process creates a stable interfacial layer with n-type doping to enhance the open-circuit voltage (VOC). Moreover, during post-treatment, N-AE dissolves a portion of the perovskite on the surface, leading to perovskite recrystallization. This process enhances the surface quality of the perovskite film and reduces nonradiative recombination. As a result, the inverted perovskite solar cell exhibits a power conversion efficiency approaching 20%, with a rise in VOC from 0.96 to 1.05 V. More impressively, the unencapsulated devices display excellent stability at 85 °C annealing and retained 88% of the initial PCE for 816 h.

Mn(II)-Based Metal Halide with Near-Unity Quantum Yield for White LEDs and High-Resolution X-ray Imaging.

Metal halides have drawn great interest as luminescent materials and scintillators due to their outstanding optical properties. Exploring new types of phosphors with easy production processes, excellent photophysical properties, high light yields, and environmentally friendly compositions is crucial and quite challenging. Herein, a novel Mn(II)-based metal halide (4-BTP)2MnBr4 was produced using a facile solvent evaporation method, which exhibited a strong green emission peaking at 524 nm from the d-d transition of tetrahedral-coordinated Mn2+ ion and a near-unity quantum yield. The prepared white light-emitting diode device has a wide color gamut of 100.7% NTSC with CIE chromaticity coordinates of (0.32, 0.32). In addition, (4-BTP)2MnBr4 demonstrates excellent characteristics in X-ray scintillation, including a high light yield of 98 000 photons/MeV, a sensitive detection limit of 37.4 nGy/s, excellent resistance to radiation damage, and successful demonstration of X-ray imaging with high resolution at 21.3 lp/mm, revealing the potential for application in diagnostic X-ray medical imaging and industry radiation detection.

A prediction model of rubber content in the dried root of Taraxacum kok-saghyz Rodin based on near-infrared spectroscopy.

BACKGROUND: Taraxacum kok-saghyz Rodin (TKS) is a highly potential source of natural rubber (NR) due to its wide range of suitable planting areas, strong adaptability, and suitability for mechanized planting and harvesting. However, current methods for detecting NR content are relatively cumbersome, necessitating the development of a rapid detection model. This study used near-infrared spectroscopy technology to establish a rapid detection model for NR content in TKS root segments and powder samples. The K445 strain at different growth stages within a year and 129 TKS samples hybridized with dandelion were used to obtain their near-infrared spectral data. The rubber content in the root of the samples was detected using the alkaline boiling method. The Monte Carlo sampling method (MCS) was used to filter abnormal data from the root segments of TKS and powder samples, respectively. The SPXY algorithm was used to divide the training set and validation set in a 3:1 ratio. The original spectrum was preprocessed using moving window smoothing (MWS), standard normalized variate (SNV), multiplicative scatter correction (MSC), and first derivative (FD) algorithms. The competitive adaptive reweighted sampling (CARS) algorithm and the corresponding chemical characteristic bands of NR were used to screen the bands. Partial least squares (PLS), random forest (RF), Lightweight gradient augmentation machine (LightGBM), and convolutional neural network (CNN) algorithms were employed to establish a model using the optimal spectral processing method for three different bands: full band, CARS algorithm, and chemical characteristic bands corresponding to NR. The model with the best predictive performance for high rubber content intervals (rubber content > 15%) was identified. RESULT: The results indicated that the optimal rubber content prediction models for TKS root segments and powder samples were MWS-FD CASR-RF and MWS-FD chemical characteristic band RF, respectively. Their respective R P 2 , RMSEP, and RPDP values were 0.951, 0.979, 1.814, 1.133, 4.498, and 6.845. In the high rubber content range, the model based on the LightGBM algorithm had the best prediction performance, with the RMSEP of the root segments and powder samples being 0.752 and 0.918, respectively. CONCLUSIONS: This research indicates that dried TKS root powder samples are more appropriate for constructing a rubber content prediction model than segmented samples, and the predictive capability of root powder samples is superior to that of root segmented samples. Especially in the elevated rubber content range, the model formulated using the LightGBM algorithm has superior predictive performance, which could offer a theoretical basis for the rapid detection technology of TKS content in the future.

Enabling robust blue circularly polarized organic afterglow through self-confining isolated chiral chromophore.

Creating circularly polarized organic afterglow system with elevated triplet energy levels, suppressed non-radiative transitions, and effective chirality, which are three critical prerequisites for achieving blue circularly polarized afterglow, has posed a formidable challenge. Herein, a straightforward approach is unveiled to attain blue circularly polarized afterglow materials by covalently self-confining isolated chiral chromophore within polymer matrix. The formation of robust hydrogen bonds within the polymer matrix confers a distinctly isolated and stabilized molecular state of chiral chromophores, endowing a blue emission band at 414 nm, lifetime of 3.0 s, and luminescent dissymmetry factor of ~ 10-2. Utilizing the synergistic afterglow and chirality energy transfer, full-color circularly polarized afterglow systems are endowed by doping colorful fluorescent molecules into designed blue polymers, empowering versatile applications. This work paves the way for the streamlined design of blue circularly polarized afterglow materials, expanding the horizons of circularly polarized afterglow materials into various domains.

Spontaneous Compositional-Interfacial Co-Modification Engineering via Ion Exchange Reaction Between Perovskite and Electron-Transporting Layer for Exceptionally Long-Term Stability of Photovoltaics.

The long-term stability of perovskite solar cells (PSCs) is still challenging for commercialization and mainly linked to the life span of perovskite films. Herein, a spontaneous compositional-interfacial co-modification strategy is developed based on the ion exchange reaction by introducing ammonium hexafluorophosphate (NH4PF6) into antisolvent to form gradient structures through a simple one-step solvent engineering. With the assistance of the ion exchange reaction, NH4PF6 forms a multifunctional structure to protect perovskite films from both internal and external factors for the exceptionally long-term stability of photovoltaics. The reason for this is linked to the high hydrophobicity of NH4PF6 for preventing H2O invasion, suppressing ion migration by forming hydrogen bonding, and reducing perovskite defects. The resulting unencapsulated devices show exceptionally long-term stability under standardized the International Summit on Organic Photovoltaic Stability (ISOS) protocols, with over 94%, 81%, and 83% retained power conversion efficiencies after aging tests under N2 (ISOS-D-1I), ambient air (ISOS-D-1), and 85 °C (ISOS-D-2I) for 14016, 2500, and 1248 h, respectively. These performances compare well with the state-of-the-art stability of inverted PSCs. Further investigations are conducted to study the evolution of macroscopic morphology and microscopic crystal structure in aged perovskite films, aiming to provide evidence supporting the aforementioned improvements in stability.

Direct Population of Triplet States for Efficient Organic Afterglow through the Intra/Intermolecular Heavy-Atom Effect.

Organic afterglow is a fascinating phenomenon with exceptional applications. However, it encounters challenges such as low intensity and efficiency, and typically requires UV-light excitation and facile intersystem crossing (ISC) due to its spin-forbidden nature. Here, we develop a novel strategy that bypasses the conventional ISC pathway by promoting singlet-triplet transition through the synergistic effects of the intra/intermolecular heavy-atom effect in aromatic crystals, enabling the direct population of triplet excited states from the ground state. The resulting materials exhibit a bright organic afterglow with a remarkably enhanced quantum efficiency of up to 5.81%, and a significantly increased organic afterglow lifetime of up to 157 microseconds under visible light. Moreover, given the high-efficiency visible-light excitable organic afterglow emission, the potential application is demonstrated in lifetime-resolved, color-encoded, and excitation wavelength-dependent pattern encryption. This work demonstrates the importance of the direct population method in enhancing the organic afterglow performance and red-shifting the excitation wavelength, and provides crucial insights for advancing organic optoelectronic technologies that involve triplet states.

Surface Reconstruction via Molten Chloride Salt for Efficient and Stable Perovskite Solar Cells.

Perovskite solar cells (PSCs) have attracted significant attention due to their high efficiencies that are closely associated with the optimized interface of perovskite (PVK) films. However, during film deposition, tremendous interfacial defects are generated in PVK films, which suppress device performance. Herein, we employ an organic molten chloride salt of 4-(4,6-dimethoxy-1,3,5-triazin-2-yl)-4-methylmorpholinium chloride (DMTMM) on the PVK surface to regulate the interface properties through surface reconstruction by heating to 110 °C, during which DMTMM undergoes an obvious phase transition from a solid to liquid molten salt. The mobile phase coordinates with unsaturated Pb2+ and halide vacancies to heal the structural defects. After the mixture cools to room temperature, a compact DMTMM interlayer is formed to protect PVKs from degradation in the air. Consequently, the DMTMM-treated MAPbI3-based PSCs yield a champion PCE approaching 20% with optimized stability. This molten-salt-assisted surface reconstruction strategy provides a new approach to establish highly stable hybrid perovskite films for high-performance PSCs.

Rational Design of Bipolar Host and Thermally Activated Delayed Fluorescence Materials in Donor-Acceptor Molecular Architecture: A Theoretical Study.

Donor-acceptor (D-A) molecules have drawn massive attention recently in the design of high-performance materials, but the underlying reasons for the magic abilities of D-A architecture in building very different organic semiconductors are still unclear. Here, based on a series of experimentally bipolar host and thermally activated delayed fluorescence (TADF) molecules with the same donor but different acceptor units, it was found that TADF emitters have more effective charge transfer between donor and acceptor units than bipolar host molecules. More efficient conjugation effects between the donor and acceptor units of host materials were identified from the lower dihedral angles of the D-A structure, smaller and even negative charge transfer amount, shorter charge-transfer length, and larger hole-electron overlap extent. These findings with in-depth insights into different interaction models of donor and acceptor units shed important light on the molecular design of TADF emitters and bipolar materials in a D-A architecture.

High-Quality Hybrid Perovskite Thin Films by Post-Treatment Technologies in Photovoltaic Applications.

Incredible progress in photovoltaic devices based on hybrid perovskite materials has been made in the past few decades, and a record-certified power conversion efficiency (PCE) of over 26% has been achieved in single-junction perovskite solar cells (PSCs). In the fabrication of high-efficiency PSCs, the postprocessing procedures toward perovskites are essential for designing high-quality perovskite thin films; developing efficient and reliable post-treatment techniques is very important to promote the progress of PSCs. Here, recent post-treatment technological reforms toward perovskite thin films are summarized, and the principal functions of the post-treatment strategies on the design of high-quality perovskite films have been thoroughly analyzed by dividing into two categories in this review: thermal annealing (TA)-related technique and TA-free technique. The latest research progress of the above two types of post-treatment techniques is summarized and discussed, focusing on the optimization of postprocessing conditions, the regulation of perovskite qualities, and the enhancement of device performance. Finally, an outlook of the prospect trends and future challenges for the fabrication of the perovskite layer and the production of highly efficient PSCs is given.

Stimulating Phonon Bottleneck Effect in Organic Semiconductors by Charge-Transfer-Mediated J-Aggregation.

Hot carriers rapidly lose kinetic energies on a subpicosecond time scale, posing significant limitations on semiconductors' photon-conversion efficiencies. To slow the hot carrier cooling, the phonon bottleneck effect is constructed prevalently in quantum-confined structures with discrete energy levels. However, the maximum energy separation (ΔEES) between the energy levels is in a range of several hundred meV, leading to unsatisfactory cooling time. To address this, we design a novel organic semiconductor capable of forming intermolecular charge transfer (CT) in J-aggregates, where the lowest singlet excited state (S1) splits into two states due to the significant interplay between the Coulomb interaction and intermolecular CT coupling. The ΔEES between the two states can be adjusted up to 1.02 eV, and an extremely slow carrier cooling process of ∼72.3 ps was observed by femtosecond transient absorption spectroscopy. Moreover, the phonon bottleneck effect was identified in organic materials for the first time, and CT-mediated J-aggregation with short-range interactions was found to be the key to achieving large ΔEES. The significantly prolonged carrier cooling time, compared to <100 fs in the isolated molecule (10-6 M), highlights the potential of organic molecules with diversified aggregation structures in achieving long-lived hot carriers. These findings provide valuable insights into the intrinsic photophysics of electron-phonon scattering in organic semiconductors.

Enhanced Resonance for Facilitated Modulation of Large-Area Perovskite Films with Stable Photovoltaics.

Upscaling efficient and stable perovskite films is a challenging task in the industrialization of perovskite solar cells partly due to the lack of high-performance hole transport materials (HTMs), which can simultaneously promote hole transport and regulate the quality of perovskite films especially in inverted solar cells. Here, a novel HTM based on N-C = O resonance structure is designed for facilitating the modulation of the crystallization and bottom-surface defects of perovskite films. Benefiting from the resonance interconversion (N-C = O and N+ = C-O- ) in donor-resonance-donor (D-r-D) architecture and interactions with uncoordinated Pb2+ in perovskite, the resulting D-r-D HTM with two donor units exhibits not only excellent hole extraction and transport capacities, but also efficient crystallization modulation of perovskite for high-quality photovoltaic films in large area. The D-r-D HTM-based large-area (1.02 cm2 ) devices exhibit high power conversion efficiencies (PCEs) up to 21.0%. Moreover, the large-area devices have excellent photo-thermal stability, showing only a 2.6% reduction in PCE under continuous AM 1.5G light illumination at elevated temperature (≈65 °C) for over 1320 h without encapsulation.

Achieving narrowband emissions with tunable colors for multiple resonance-thermally activated delayed fluorescence materials: effect of boron/nitrogen number and position.

The boron/nitrogen (B/N)-based multiple resonance-thermally activated delayed fluorescence (MR-TADF) materials with tunable colors have attracted widespread attention owing to their great potential in next-generation display, white lighting, and imaging applications. Numerous MR-TADF emitters with different B/N number and position have been reported to realize full-color narrowband emissions. To gain a better understanding of the effect of B/N number and position on the photo-electronic properties, geometric and electronic properties, Huang-Rhys factors and reorganization energies, charger transfer and absorption/emission properties were analyzed in detail to determine the structure-property relationship for the investigated molecules. The calculated results show that the molecules with para-atoms having the same electronic characteristics (para-B-π-B/para-N-π-N) exhibited smaller structural relaxations upon excitation, and the molecules with increased B/N atoms showed more obvious short-range charge transfer (SRCT) properties. Besides, the para-B-π-N and para-B-π-B/para-N-π-N substructures could reduce and enhance the donor and acceptor strengths, respectively, leading to tunable HOMO-LUMO gaps and emission colors. Such theoretical insights well rationalize the experimental results, revealing that the small reorganization energy and dominant SRCT property should be two key factors in realizing narrowband emissions of MR-TADF materials. These findings and understandings could give an in-depth insight into the structure-property relationship, providing molecular design strategies for the exploration of narrowband MR-TADF materials with tunable emission colors.

High-Quality Circularly Polarized Organic Afterglow from Nonconjugated Amorphous Chiral Copolymers.

Organic materials featuring circularly polarized luminescence (CPL) and/or afterglow emission represent an active research frontier with promising applications in various fields, but the achievement of high-performance CPL organic afterglow (CPOA) remains a huge challenge due to the intrinsic contradictions between the luminescent lifetime/dissymmetry factor (glum) and phosphorescent quantum efficiency (PhQY). Herein, we report a simple and universal approach to design efficient CPOA from amorphous copolymers by incorporating chiral chromophores into a nonconjugated clusterization-triggered emissive polymer with plenty of hydron-bonding interactions, followed by aggregation engineering using water dissolution and evaporation. With this chiral copolymerization and aggregation engineering (CCAE) strategy, high-performance CPOA polymers with PhQYs of up to 6.32%, ultralong lifetimes of over 650 ms, glum values of 3.54 × 10-3, and the highest figure-of-merit were achieved at room temperature. Given the impressive CPOA performance of these polymers, the applications in multilevel data anticounterfeiting and reversible displays with high stability were demonstrated. These findings through the CCAE strategy to overcome the inherent restraints of CPOA materials lay the foundation for the development of amorphous polymers with superior CPOA, significantly expanding the understanding of CPL and the design of organic afterglow materials.

Ultralong Red Room-Temperature Phosphorescence of 2D Organic-Inorganic Metal Halide Perovskites for Afterglow Red LEDs and X-ray Scintillation Applications.

Organic-inorganic metal hybrid perovskites (OIHPs) have emerged as a promising class of materials for next-generation optoelectronic applications. However, the realization of red and near-infrared (NIR) room-temperature phosphorescence (RTP) in these materials remains limited. In this study, a very strong red RTP emission centered at 610 nm is achieved by doping Mn2+ ions into Cd-based 2D OIHPs. Notably, the optimized B-EACC:Mn2+ exhibited a high quantum yield of 44.11%, an ultralong lifetime of up to 378 ms, and excellent stability against high temperatures and various solvents, surpassing most reported counterparts of 2D OIHPs. Moreover, the B-EACC:Mn2+ can be used as a red emitter for coating an ultraviolet light-emitting diode chip, exhibiting an observable afterglow to the naked eye for approximately 4 s. In addition, the B-EACC:Mn2+ demonstrates interesting characteristics under X-ray excitation, exhibiting X-ray response at radiation doses in the range of 34.75-278 µGy s-1. This work suggests the infinite possibility of doping guest ions to realize red RTP in 2D OIHPs, promoting the development of long-persistent phosphorescent emitters for multifunctional light-emitting applications.

Manipulating Multiple Resonance-Charge Transfer Hybrid Proportion for Developing Red Narrowband Thermally Activated Delayed Fluorescence Materials.

Multiple resonance thermally activated delayed fluorescence (MR-TADF) materials have attracted increasing attention because of their 100% exciton utilization capability and narrowband emissions. However, it remains a formidable challenge to develop such red materials. Herein, we perform a theoretical investigation on the design of red narrowband TADF materials via manipulating the MR-charge transfer (CT) hybrid proportion by regulating the types of MR cores and peripheral electron-donating units. The results indicate that the MR-CT proportion in the excited states is closely relevant to the frontier molecular orbital (FMO)/hole-electron overlap, which is mainly determined by the dihedral angle between the MR cores and the peripheral units for the MR donor-acceptor molecules. The electron-donating ability of the peripheral substituents has little influence on the FMO/hole-electron overlap. Finally, c1-a and c2-a with red narrowband emissions were revealed. These findings with rich physical insights into the structure-property relationship should provide important clues for designing red narrowband optoelectronic materials.

Achieving Ultralong Room-Temperature Phosphorescence in Two-Dimensional Metal Halide Perovskites by Alkyl Chain Engineering.

Two-dimensional (2D) metal halide perovskites with highly efficient ultralong room-temperature phosphorescence (URTP) are rare due to their uncertain structures and complicated intermolecular interactions. Herein, by varying the alkyl length of organic units, we synthesized two single-component 2D metal hybrid perovskites, i.e., B-MACC and B-EACC, with obvious URTP emission. In particular, B-EACC exhibits a green-yellow URTP emission with an ultralong lifetime (579 ms) and a high efficiency (14.86%). It is found that the molecular packing of B-EA+ cations because of the presence one more carbon in the alkyl chain affords strong hydrogen bonding and π-π stacking interactions, which immobilizes and reduces the triplet exciton quenching. Moreover, B-MACC and B-EACC with space-time dual-resolved characteristics can be utilized for dynamic information encryption and optical logic gate applications. This study is the first to disclose the relation between the characteristics of molecular packing and the resultant URTP of 2D metal hybrid perovskites, significantly advancing the development of next-generation URTP materials for versatile applications.

Time-Dependent Colorful Circularly Polarized Organic Ultralong Room Temperature Phosphorescence from a Single-Component Chiral Molecule.

Colorful circularly polarized organic ultralong room temperature phosphorescence (CP-OURTP) materials have attracted much attention due to their superior optoelectronic properties for various applications. However, the development of colorful CP-OURTP materials in a single-component molecular system is currently facing great challenges. Herein, a feasible strategy is proposed to develop colorful CP-OURTP material from a single-component chiral molecule by introducing a chiral unit into the phosphorescence chromophore. A dual CP-OURTP band originated from inherent triplet excitons emission showing a lifetime of 946.44 ms and triplet-triplet annihilation induced delayed emission with a short lifetime of 209.91 ms as well as maximum asymmetry factors of ≈10-3 are realized. Owing to the changed OURTP intensity ratios between inherent CP-OURTP and delayed emission at different delayed times, time-dependent colorful CP-OURTP turned from yellow to green is obtained. This study provides a potential platform to prepare circularly polarized material systems showing colorful luminescent properties.

Crystallinity and Phase Control in Formamidinium-Based Dion-Jacobson 2D Perovskite via Seed-Induced Growth for Efficient Photovoltaics.

2D perovskites based on Formamidinium (FA) hold the potential for excellent stability and a broad absorption range, making them attractive materials for solar cells. However, FA-based 2D perovskites produced via one-step processing exhibit poor crystallinity and random quasi-quantum wells (QWs), leading to subpar photovoltaic performance. In this study, a seed-induced growth approach is introduced employing MAPbCl3 and BDAPbI4 in the deposition of FA-based Dion-Jacobson 2D perovskite films. This method yields high-quality perovskite films as the seeds preferentially precipitate and serve as templates for the epitaxial growth of FA-based counterparts, effectively suppressing the δ phase. Moreover, the epitaxial growth facilitated by uniformly dispersed seeds results in simultaneous crystallization from top to bottom, efficiently mitigating random phases (n = 2, 3, 4…) induced by the diffusion of organic cations and, in turn, minimizing energy loss. The impact of seed-induced growth on the crystallization and phase distribution of FA-based 2D perovskites is systematically investigated. As a result, the optimized FA-based 2D perovskite solar cell delivers an outstanding efficiency of 20.0%, accompanied by a remarkable fill factor of 0.823. Additionally, the unencapsulated device demonstrates exceptional stability, maintaining 98% of its initial efficiency after 1344 h of storage.

Kinetic Control of Solvate Intermediate Evolution for High-Performance Perovskite Solar Cells by the Facial Mask Incubation Technique.

The growth of high-quality perovskite films is complicated by the fact of uncontrollable crystallization pathways from perovskite precursors. During solution processing, extensive undesired nonperovskite products including residual solvate intermediates are produced due to quick solvent evaporation, which will adversely affect the efficiency and stability of perovskite solar cells (PSCs). Herein, we developed a highly efficient phase-transition pathway using a polydimethylsiloxane (PDMS)-based facial mask (FM) incubation technique, which enables significant reduction of the perovskite crystallization rate and depression of perovskite aggregation behavior. A surprising finding reveals that this technique induces complete phase transition from solvate intermediates to the perovskite phase, thereby obtaining phase-pure perovskite film. Meanwhile, a high-quality perovskite film with a shiny smooth surface, decreased defect states, and alleviated lattice strain is achieved after utilizing the FM strategy. Consequently, the target-inverted PSCs deliver a respectable efficiency of ∼21% and superior stability in both shelf storage (over 3700 h with 90% of initial efficiency) and light soaking (over 1000 h with 80% of initial efficiency) conditions. Our work highlights the importance of eliminating residual solvate intermediates to construct high-quality perovskites with excellent phase purity for ongoing production of high-performance perovskite-based optoelectronic devices.

Multifunctional Resonance Bridge-Mediated Dynamic Modulation of Perovskite Films For Enhanced Intrinsic Stability of Photovoltaics.

The improving intrinsic stability, determining the life span of devices, is a challenging task in the industrialization of inverted perovskite solar cells. The most important prerequisite for boosting intrinsic stability is high-quality perovskite films deposition. Here, a molecule, N-(2-pyridyl)pivalamide (NPP) is utilized, as a multifunctional resonance bridge between poly(triarylamine) (PTAA) and perovskite film to regulate the perovskite film quality and promote hole extraction for enhancing the device intrinsic stability. The pyridine groups in NPP couple with the phenyl groups in PTAA through π-π stacking to improve hole extraction capacities and minimize interfacial charge recombination, and the resonance linkages (NCO) in NPP dynamically modulate the perovskite buried defects through strong PbO bonds based on the fast self-adaptive tautomerization between resonance forms (NCO and N+ CO- ). Because of the combined effect of the reduction defect density and improved energy level in the perovskite buried interfaces as well as the optimized crystal orientation in perovskite film enabled by the NPP substrate, the devices based on NPP-grown perovskite films show an efficiency approaching 20% with negligible hysteresis. More impressively, the unencapsulated device displays start-of-the-art intrinsic photostability, operating under continuous 1-sun illumination for 2373 h at 65 °C without loss of PCE.