Hierarchical and reconfigurable interfibrous interface of bioinspired Bouligand structure enabled by moderate orderliness.

Introducing natural Bouligand structure into synthetics is expected to develop high-performance structural materials. Interfibrous interface is critical to load transfer, and mechanical functionality of bioinspired Bouligand structure yet receives little attention. Here, we propose one kind of hierarchical and reconfigurable interfibrous interface based on moderate orderliness to mechanically reinforce bioinspired Bouligand structure. The interface imparted by moderate alignment of adaptable networked nanofibers hierarchically includes nanofiber interlocking and hydrogen-bonding (HB) network bridging, being expected to facilitate load transfer and structural stability through dynamic adjustment in terms of nanofiber sliding and HB breaking-reforming. As one demonstration, the hierarchical and reconfigurable interfibrous interface is constructed based on moderate alignment of networked bacterial cellulose nanofibers. We show that the resultant bioinspired Bouligand structural material exhibits unusual strengthening and toughening mechanisms dominated by interface-microstructure multiscale coupling. The proposed interfibrous interface enabled by moderate orderliness would provide mechanical insight into the assembly of widely existing networked nanofiber building blocks toward high-performance macroscopic bioinspired structural assemblies.

Effects of Platelet-Rich Plasma-Derived Exosomes on Proliferation and Migration of Tendon Stem/Progenitor Cell.

Objective To investigate the effects of platelet-rich plasma-derived exosomes (PRP-Exos) on the proliferation and migration of tendon stem/progenitor cell (TSPC). Methods PRP-Exos were extracted through the combination of polymer-based precipitation and ultracentrifugation.The morphology,concentration,and particle size of PRP-Exos were identified by transmission electron microscopy and nanoparticle tracking analysis.The expression levels of surface marker proteins on PRP-Exos and platelet membrane glycoproteins were determined by Western blot analysis.Rat TSPC was extracted and cultured,and the expression of surface marker molecules on TSPC was detected using flow cytometry and immunofluorescence staining.The proliferation of TSPC influenced by PRP-Exos was evaluated using CCK-8 assay and EdU assay.The effect of PRP-Exos on the migration of TSPC was evaluated by cell scratch assay and Transwell assay. Results The extracted PRP-Exos exhibit typical saucer-like structures,with a concentration of 4.9×1011 particles/mL,an average particle size of (132.2±56.8) nm,and surface expression of CD9,CD63 and CD41.The extracted TSPC expressed the CD44 protein.PRP-Exos can be taken up by TSPC,and after co-cultured for 48 h,concentrations of 50 and 100 µg/mL of PRP-Exos significantly promoted the proliferation of TSPC (both P<0.001),with no statistical difference between the two concentrations (P=0.283).Additionally,after co-cultured for 24 h,50 µg/mL of PRP-Exos significantly promoted the migration of TSPC (P<0.001). Conclusion Under in vitro culture conditions,PRP-Exos significantly promote the proliferation and migration of rat TSPC.

Bioinspired polysaccharide-based nanocomposite membranes with robust wet mechanical properties for guided bone regeneration.

Polysaccharide-based membranes with excellent mechanical properties are highly desired. However, severe mechanical deterioration under wet conditions limits their biomedical applications. Here, inspired by the structural heterogeneity of strong yet hydrated biological materials, we propose a strategy based on heterogeneous crosslink-and-hydration (HCH) of a molecule/nano dual-scale network to fabricate polysaccharide-based nanocomposites with robust wet mechanical properties. The heterogeneity lies in that the crosslink-and-hydration occurs in the molecule-network while the stress-bearing nanofiber-network remains unaffected. As one demonstration, a membrane assembled by bacterial cellulose nanofiber-network and Ca2+-crosslinked and hydrated sodium alginate molecule-network is designed. Studies show that the crosslinked-and-hydrated molecule-network restricts water invasion and boosts stress transfer of the nanofiber-network by serving as interfibrous bridge. Overall, the molecule-network makes the membrane hydrated and flexible; the nanofiber-network as stress-bearing component provides strength and toughness. The HCH dual-scale network featuring a cooperative effect stimulates the design of advanced biomaterials applied under wet conditions such as guided bone regeneration membranes.

Bottom-Up Film-to-Bulk Assembly Toward Bioinspired Bulk Structural Nanocomposites.

Biological materials, although composed of meager minerals and biopolymers, often exhibit amazing mechanical properties far beyond their components due to hierarchically ordered structures. Understanding their structure-properties relationships and replicating them into artificial materials would boost the development of bulk structural nanocomposites. Layered microstructure widely exists in biological materials, serving as the fundamental structure in nanosheet-based nacres and nanofiber-based Bouligand tissues, and implying superior mechanical properties. High-efficient and scalable fabrication of bioinspired bulk structural nanocomposites with precise layered microstructure is therefore important yet remains difficult. Here, one straightforward bottom-up film-to-bulk assembly strategy is focused for fabricating bioinspired layered bulk structural nanocomposites. The bottom-up assembly strategy inherently offers a methodology for precise construction of bioinspired layered microstructure in bulk form, availability for fabrication of bioinspired bulk structural nanocomposites with large sizes and complex shapes, possibility for design of multiscale interfaces, feasibility for manipulation of diverse heterogeneities. Not limited to discussing what has been achieved by using the current bottom-up film-to-bulk assembly strategy, it is also envisioned how to promote such an assembly strategy to better benefit the development of bioinspired bulk structural nanocomposites. Compared to other assembly strategies, the highlighted strategy provides great opportunities for creating bioinspired bulk structural nanocomposites on demand.

Isobaric Stable Isotope N-Phosphorylation Labeling (iSIPL) for Ultrasensitive Proteome Quantification.

Stable isotope chemical labeling methods have been widely used for high-throughput mass spectrometry (MS)-based quantitative proteomics in biological and clinical applications. However, the existing methods are far from meeting the requirements for high sensitivity detection. In the present study, a novel isobaric stable isotope N-phosphorylation labeling (iSIPL) strategy was developed for quantitative proteome analysis. The tryptic peptides were selectively labeled with iSIPL tag to generate the novel reporter ions containing phosphoramidate P-N bond with high intensities under lower collision energies. iSIPL strategy are suitable for peptide sequencing and quantitative analysis with high sensitivity and accuracy even for samples of limited quantity. Furthermore, iSIPL coupled with affinity purification and mass spectrometry was applied to measure the dynamics of cyclin dependent kinase 9 (CDK9) interactomes during transactivation of the HIV-1 provirus. The interaction of CDK9 with PARP13 was found to significantly decrease during Tat-induced activation of HIV-1 gene transcription, suggesting the effectiveness of iSIPL strategy in dynamic analysis of protein-protein interaction in vivo. More than that, the proposed iSIPL strategy would facilitate large-scale accurate quantitative proteomics by increasing multiplexing capability.

Biomimetic Gradient Bouligand Structure Enhances Impact Resistance of Ceramic-Polymer Composites.

Biological materials relied on multiple synergistic structural design elements typically exhibit excellent comprehensive mechanical properties. Hierarchical incorporation of different biostructural elements into a single artificial material is a promising approach to enhance mechanical properties, but remains challenging. Herein, a biomimetic structural design strategy is proposed by coupling gradient structure with twisted plywood Bouligand structure, attempting to improve the impact resistance of ceramic-polymer composites. Via robocasting and sintering, kaolin ceramic filaments reinforced by coaxially aligned alumina nanoplatelets are arranged into Bouligand structure with a gradual transition in filament spacing along the thickness direction. After the following polymer infiltration, biomimetic ceramic-polymer composites with a gradient Bouligand (GB) structure are eventually fabricated. Experimental investigations reveal that the incorporation of gradient structure into Bouligand structure improves both the peak force and total energy absorption of the obtained ceramic-polymer composites. Computational modeling further suggests the substantial improvement in impact resistance by adopting GB structure, and clarifies the underlying deformation behavior of the biomimetic GB structured composites under impact. This biomimetic design strategy may provide valuable insights for developing lightweight and impact-resistant structural materials in the future.

Mechanically robust bamboo node and its hierarchically fibrous structural design.

Although short bamboo nodes function in mechanical support and fluid exchange for bamboo survival, their structures are not fully understood compared to unidirectional fibrous internodes. Here, we identify the spatial heterostructure of the bamboo node via multiscale imaging strategies and investigate its mechanical properties by multimodal mechanical tests. We find three kinds of hierarchical fiber reinforcement schemes that originate from the bamboo node, including spatially tightened interlocking, triaxial interconnected scaffolding and isotropic intertwining. These reinforcement schemes, built on porous vascular bundles, microfibers and more-refined twist-aligned nanofibers, govern the structural stability of the bamboo via hierarchical toughening. In addition, the spatial liquid transport associated with these multiscale fibers within the bamboo node is experimentally verified, which gives perceptible evidence for life-indispensable multidirectional fluid exchange. The functional integration of mechanical reinforcement and liquid transport reflects the fact that the bamboo node has opted for elaborate structural optimization rather than ingredient richness. This study will advance our understanding of biological materials and provide insight into the design of fiber-reinforced structures and biomass utilization.

Bioinspired Impact-Resistant and Self-Monitoring Nanofibrous Composites.

Lightweight and impact-resistant materials with self-monitoring capability are highly desired for protective applications, but are challenging to be artificially fabricated. Herein, a scalable-manufactured aramid nanofiber (ANF)-based composite combining these key properties is presented. Inspired by the strengthening and toughening mechanisms relying on recoverable interfaces commonly existing in biological composites, mechanically weak but dense hydrogen bonds are introduced into the ANF interfaces to achieve simultaneously enhanced tensile strength (300 MPa), toughness (55 MJ m-3 ), and impact resistance of the nanofibrous composite. The achieved mechanical property combination displays attractive advantages compared with that of most of previously reported nanocomposites. Additionally, the nanofibrous composite is designed with a capability for real-time self-monitoring of its structural safety during both quasi-static tensile and dynamic impact processes, based on the strain/damage-induced resistance variations of a conductive nanowire network inside it. These comprehensive properties enable the present nanofibrous composite with promising potential for protective applications.

Self-Assembly of Nanowires: From Dynamic Monitoring to Precision Control.

Natural biomaterials often show ordered nanowire structures (ONWS) which display unique structural color or superior mechanical performance. Meanwhile, plenty of modern nanodevices with ONWS have flourished with activities focused on both basic and applied research. Manipulating synthetic nanowire (NW) from a disordered state to a hierarchically ordered structure via various assembly strategies brings about intriguing and exotic chemical/physical properties. In the past decades, many methods have been developed to assemble NWs and fabricate organized architectures, such as Langmuir-Blodgett interfacial assembly, spin-coating assembly, fluid-flow-induced assembly, and ice-template assembly. Nevertheless, for practical applications, large-scale and high-efficiency assembly strategies toward precise controlled architectures are largely limited by the lack understanding of assembly mechanisms. Especially, the manipulation principles and driving forces behind the state-of-art assembly strategies are still unclear. Besides, the lesser research attention on dynamic kinetics also impedes the revelation of the NW self-assembly mechanism. With the emergence of advanced in situ techniques, such as synchrotron-based X-ray techniques and in situ transmission electron microscopy (TEM), the dynamic monitoring of NW behavior in many practical environments becomes possible. In addition, the alignment direction and the stacking manner of NW film are of significance to the final performance. There is a lack of connection between the properties of one-dimensional nanoscale building blocks and the functionalities of the macro-assembly structures. To this end, dynamic monitoring is highly desired, which enables the precision modulation of NW assembly structure, leading to the discovery or prediction of new structures, novel properties, and performance optimization.In this Account, we aim to uncover the underlying kinetics of NW assembly or local reaction and mass transportation processes, as well as to build a solid connection from individual NWs to NW assembly structures with enhanced properties and eventually to macroscopic materials application. We first review the recent progress in state-of-art NW assembly strategies for diverse aligned structures according to the manipulation principle and the driving forces. To systematically review the NW self-assembly strategies, we categorize these strategies into three states: NWs on the liquid interface via surface tension, NW assembly in liquid via solution-shearing flow field, and NW assembly at the solid interval via physical repulsive force. Then, we introduce the existing advanced characterization techniques, including synchrotron-based X-ray scattering and in situ TEM, to dynamically monitor the intermediate states of the NW assembly and transport processes. The comprehensive understanding of this thermodynamic and kinetic mechanism facilitates the rational design, large scale, and high-efficiency fabrication of NW assemblies, thus promoting their applications in tailored optical-electrical electronics, smart electrochromic devices, electrocatalysis, structural materials, and chiral photonic crystals.

Double-Layer Nacre-Inspired Polyimide-Mica Nanocomposite Films with Excellent Mechanical Stability for LEO Environmental Conditions.

Owing to their outstanding comprehensive performance, polyimide (PI) composite films are widely used on the external surfaces of spacecraft to protect them from the adverse conditions of low Earth orbit (LEO). However, current PI composite films have inadequate mechanical properties and atomic oxygen (AO) resistance. Herein, this work fabricates a new PI-based nanocomposite film with greatly enhanced mechanical properties and AO resistance by integrating mica nanosheets with PI into a unique double-layer nacre-inspired structure with a much higher density of mica nanosheets in the top layer. In addition, the unique microstructure and the intrinsic properties of mica also impart the nanocomposite film with favorable ultraviolet and high-temperature resistance. The comprehensive performance of this material is superior to those of pure PI, single-layer PI-mica, and previously reported PI-based composite films. Thus, the double-layer nanocomposite film displays great potential as an aerospace material for use in LEO.

Plausibility of Early Life in a Relatively Wide Temperature Range: Clues from Simulated Metabolic Network Expansion.

The debate on the temperature of the environment where life originated is still inconclusive. Metabolic reactions constitute the basis of life, and may be a window to the world where early life was born. Temperature is an important parameter of reaction thermodynamics, which determines whether metabolic reactions can proceed. In this study, the scale of the prebiotic metabolic network at different temperatures was examined by a thermodynamically constrained network expansion simulation. It was found that temperature has limited influence on the scale of the simulated metabolic networks, implying that early life may have occurred in a relatively wide temperature range.

Trans-base and trans-vault low-velocity penetrating brain injury: A retrospective comparative study of characteristics, treatment, and outcomes.

PURPOSE: Low-velocity penetrating brain injury (LVPBI) caused by foreign bodies can pose life-threatening emergencies. Their complexity and lack of validated classification data have prevented standardization of clinical management. We aimed to compare the trans-base and trans-vault phenotypes of LVPBI to help provide guidance for clinical decision-making of such injury type. METHODS: A retrospective study on LVPBI patients managed at our institution from November 2013 to March 2020 was conducted. We included LVPBI patients admitted for the first time for surgery, and excluded those with multiple injuries, gunshot wounds, pregnancy, severe blunt head trauma, etc. Patients were categorized into trans-base and trans-vault LVPBI groups based on the penetration pathway. Discharged patients were followed up by outpatient visit or telephone. The data were entered into the Electronic Medical Record system by clinicians, and subsequently derived by researchers. The demography and injury characteristics, treatment protocols, complications, and outcomes were analyzed and compared between the two groups. A t-test was used for analysis of normally distributed data, and a Mann-Whitney U test for non-parametric data. A generalized linear model was further established to determine whether the factors length of stay and performance scale score were influenced by each factor. RESULTS: A total of 27 LVPBI patients were included in this analysis, comprised of 13 (48.1%) trans-base cases and 14 (51.9%) trans-vault cases. Statistical analyses suggested that trans-base LVPBI was correlated with deeper wounds; while the trans-vault phenotype was correlated with injury by metal foreign bodies. There was no difference in Glasgow Coma Scale score and the risk of intracranial hemorrhage between the two groups. Surgical approaches in the trans-base LVPBI group included subfrontal (n = 5, 38.5%), subtemporal (n = 5, 38.5%), lateral fissure (n = 2, 15.4%), and distal lateral (n = 1, 7.7%). All patients in the trans-vault group underwent a brain convex approach using the foreign body as reference (n = 14, 100%). Moreover, the two groups differed in application prerequisites for intracranial pressure monitoring and vessel-related treatment. Trans-base LVPBI was associated with higher rates of cranial nerve and major vessel injuries; in contrast, trans-vault LVPBI was associated with lower functional outcome scores. CONCLUSION: Our findings suggest that trans-base and trans-vault LVPBIs differ in terms of characteristics, treatment, and outcomes. Further understanding of these differences may help guide clinical decisions and contribute to a better management of LVPBIs.

Nacreous aramid-mica bulk materials with excellent mechanical properties and environmental stability.

Low density, high strength and toughness, together with good environmental stability are always desirable but hardly to achieve simultaneously for man-made structural materials. Replicating the design motifs of natural nacre clearly provides one promising route to obtain such kind of materials, but fundamental challenges remain. Herein, by choosing aramid nanofibers and mica microplatelets as building blocks, we produce a nacreous aramid-mica bulk material with a favorable combination of low density (∼1.7 g cm-3), high strength (∼387 MPa) and toughness (∼14.3 MPa m1/2), and impressive mechanical stability in some harsh environments, including acid/alkali solutions, strong ultraviolet radiation, boiling water, and liquid nitrogen, standing out from previously reported biomimetic bulk composites. Moreover, the obtained material outperforms other bulk nacre-mimetics and most engineering structural materials in terms of its specific strength (227 MPa/[Mg m-3]) and specific toughness (8.4 MPa m1/2/[Mg m-3]), making it a new promising engineering structural material for different technical fields.

The Nuclear Localization of the DnaJ-Like Zinc Finger Domain-Containing Protein EDA3 Affects Seed Development in Arabidopsis thaliana.

The DnaJ-like zinc finger domain-containing proteins are involved in different aspects of plastid function and development. Some of these proteins were recently reported to have dual subcellular localization in the nucleus and plastids. One member of this family, PSA2 (AT2G34860), was found to localize to the thylakoid lumen and regulate the assembly of photosystem I (PSI). However, PSA2 was also annotated as Embryo sac Development Arrest 3 (EDA3) from the observation that its embryo sac development was arrested at the two-nuclear stage. In this study, we characterized the eda3 mutant, and demonstrated that, as compared with the wild-type (WT) plants, the mutant has shorter siliques, fewer siliques per plant, and fewer seeds per silique. Both aborted and undeveloped ovules were observed in siliques of the mutant. By immunoblot analysis, we found that, different from the chloroplast localization in mature leaves, EDA3 localizes in the nucleus in seeds. A nuclear localization signal was identified from the deduced amino acid sequence of EDA3, and also proved to be sufficient for directing its fusion peptide into the nucleus.

[Spatial variability and agglomeration of soil salinity in Minjiang estuary wetland, Southeast China]. / 闽江河口湿地土壤盐分的空间分异与集聚特征.

Understanding the spatial variability and agglomeration of soil salinity is of great significance for the sustainable development of estuarine wetland. Landsat 8 OLI remote sensing image, digital elevation mode and soil surface samples of Minjiang estuary wetland of Fuzhou were used as the data sources. The correlation analysis and principal component analysis were combined to select significant environmental variables and to reduce their dimensions. We analyzed the spatial variability of soil salinity with support vector regression ordinary kriging model (SVROK) and regression kri-ging model (RK), and quantified spatial agglomeration of soil salinity by the spatial autocorrelation analysis. The results showed that three principal components (PCs) extracted by the principal component analysis could explain at least 85% of the total variance in the original dataset and reflected the comprehensive information of vegetation cover, soil properties and topography. Both soil salinity and its residuals were affected by structural factors and random factors. The SVROK model based on principal component (PCs) as input variables can more accurately reflect the spatial variability of soil salinity, with a trend of "higher in the north and lower in the south". The Moran's I of soil salinity was more than 0.5, with significant positive spatial autocorrelation and a higher spatial aggregation degree, displaying the spatial agglomeration characteristics of "high value agglomeration, high value widespread, high value surrounded by low value".

Chromosome-scale assembly of the Kandelia obovata genome.

The mangrove Kandelia obovata (Rhizophoraceae) is an important coastal shelterbelt and landscape tree distributed in tropical and subtropical areas across East Asia and Southeast Asia. Herein, a chromosome-level reference genome of K. obovata based on PacBio, Illumina, and Hi-C data is reported. The high-quality assembled genome size is 177.99 Mb, with a contig N50 value of 5.74 Mb. A large number of contracted gene families and a small number of expanded gene families, as well as a small number of repeated sequences, may account for the small K. obovata genome. We found that K. obovata experienced two whole-genome polyploidization events: one whole-genome duplication shared with other Rhizophoreae and one shared with most eudicots (γ event). We confidently annotated 19,138 protein-coding genes in K. obovata and identified the MADS-box gene class and the RPW8 gene class, which might be related to flowering and resistance to powdery mildew in K. obovata and Rhizophora apiculata, respectively. The reference K. obovata genome described here will be very useful for further molecular elucidation of various traits, the breeding of this coastal shelterbelt species, and evolutionary studies with related taxa.

[Quantitative Evaluation of Sciatic Nerve Crush Injury with Conventional Ultrasound Combined with Shear-wave Elastography in Rabbit Models].

Objective To explore the value of conventional ultrasound combined with shear-wave elastography in the quantitative evaluation of sciatic nerve crush injury in rabbit models. Methods Forty healthy male New Zealand white rabbits were randomly divided into four groups (n=10 in each group):three crush injury (CI) groups (2,4,and 8 weeks after crush) and control group (without injury). The thickness and stiffness of the crushed sciatic nerves and denervated triceps surae muscles were measured at different time points and compared with histopathologic parameters. Inter-reader variability was assessed with intraclass correlation coefficients. Results Compared with the control group,the inner diameters of the sciatic nerves significantly increased in the 2-week CI group [(1.65±0.34) mm vs. (0.97±0.15) mm,P=0.00] but recovered to the nearly normal level in the 8-week CI group [(1.12±0.18) mm vs. (0.97±0.15) mm,P=0.06];however,compared with control group [(8.75±1.02)kPa],the elastic modulus of the nerves increased significantly in all the CI groups [2-week:(14.77±2.53) kPa;4-week:(19.12±3.46) kPa;and 8-week:(28.39±5.26) kPa;all P=0.00];pathologically,massive hyperplasia of collagen fibers were found in the nerve tissues. The thickness of denervated triceps surae muscle decreased gradually,and the elastic modulus decreased 2 weeks after injury but increased gradually in the following 6 weeks;pathologically,massive hyperplasia of collagen fibers and adipocytes infiltration were visible,along with decreased muscle wet-weight ratio and muscle fiber cross-sectional area. The inter-reader agreements were good. Conclusion Conventional ultrasound combined with shear-wave elastography is feasible for the quantitative evaluation of the morphological and mechanical properties of crushed nerves and denervated muscles.

Bioinspired hierarchical helical nanocomposite macrofibers based on bacterial cellulose nanofibers.

Bio-sourced nanocellulosic materials are promising candidates for spinning high-performance sustainable macrofibers for advanced applications. Various strategies have been pursued to gain nanocellulose-based macrofibers with improved strength. However, nearly all of them have been achieved at the expense of their elongation and toughness. Inspired by the widely existed hierarchical helical and nanocomposite structural features in biosynthesized fibers exhibiting exceptional combinations of strength and toughness, we report a design strategy to make nanocellulose-based macrofibers with similar characteristics. By combining a facile wet-spinning process with a subsequent multiple wet-twisting procedure, we successfully obtain biomimetic hierarchical helical nanocomposite macrofibers based on bacterial cellulose nanofibers, realizing impressive improvement in their tensile strength, elongation and toughness simultaneously. The achievement certifies the validity of the bioinspired hierarchical helical and nanocomposite structural design proposed here. This bioinspired design strategy provides a potential platform for further optimizing or creating many more strong and tough nanocomposite fiber materials for diverse applications.

Bio-Inspired Synthesis of Hematite Mesocrystals by Using Xonotlite Nanowires as Growth Modifiers and Their Improved Oxygen Evolution Activity.

Bio-inspired synthesis of functional materials with highly ordered structure and tunable properties is of particular interest, but efficient approaches that allow the access of these materials are still limited. A method has been developed for the preparation of hematite particles by using xonotlite nanowires (XNWs) as growth modifiers. The concentration of the XNWs has a profound effect on the final morphology of the products, whereas the concentration of the iron(III) ions can control the size of the hematite particles. The underlying mechanism of the bio-inspired XNW-modified mineralization process has been proposed. The obtained hematite particles exhibit good catalytic performance in the oxygen evolution reaction (OER), affording a current density of 10 mA cm-2 with an overpotential of 370 mV, a small Tafel slope of 65 mV dec-1 , and good stability in alkaline electrolyte. This strategy for preparing functional materials by using nanowires as the growth modifiers has great potential for future application in the construction of various materials with hierarchical structures.

A general aerosol-assisted biosynthesis of functional bulk nanocomposites.

Although a variety of nanoparticles with better-than-bulk material performances can be synthesized, it remains a challenge to scale the extraordinary properties of individual nanoscale units to the macroscopic level for bulk nanostructured materials. Here, we report a general and scalable biosynthesis strategy that involves simultaneous growth of cellulose nanofibrils through microbial fermentation and co-deposition of various kinds of nanoscale building blocks (NBBs) through aerosol feeding on solid culture substrates. We employ this biosynthesis strategy to assemble a wide range of NBBs into cellulose nanofibril-based bulk nanocomposites. In particular, the biosynthesized carbon nanotubes/bacterial cellulose nanocomposites that consist of integrated 3D cellulose nanofibril networks simultaneously achieve an extremely high mechanical strength and electrical conductivity, and thus exhibit outstanding performance as high-strength lightweight electromagnetic interference shielding materials. The biosynthesis approach represents a general and efficient strategy for large-scale production of functional bulk nanocomposites with enhanced performances for practical applications. Industrial-scale production of these bulk nanocomposite materials for practical applications can be expected in the near future.