The Influence of Oxygen Plasma on Methylammonium Lead Iodide (MAPbI3) Film Doped with Lead Cesium Triiodide (CsPbI3).

In recent years, the study of organic-inorganic halide perovskite as an optoelectronics material has been a significant line of research, and the power conversion efficiency of solar cells based on these materials has reached 25.5%. However, defects on the surface of the film are still a problem to be solved, and oxygen plasma is one of the ways to passivate surface defects. In order to avoid destroying the methylammonium lead iodide (MAPbI3), the influence of plasma powers on film was investigated and the cesium triiodide (CsPbI3) quantum dots (QDs) were doped into the film. In addition, it was found that oxygen plasma can enhance the mobility and carrier concentration of the MAPbI3 film.

Effect of Growth Temperature on the Characteristics of CsPbI3-Quantum Dots Doped Perovskite Film.

In this study, adding CsPbI3 quantum dots to organic perovskite methylamine lead triiodide (CH3NH3PbI3) to form a doped perovskite film filmed by different temperatures was found to effectively reduce the formation of unsaturated metal Pb. Doping a small amount of CsPbI3 quantum dots could enhance thermal stability and improve surface defects. The electron mobility of the doped film was 2.5 times higher than the pristine film. This was a major breakthrough for inorganic quantum dot doped organic perovskite thin films.

Improved Color Purity of Blue Organic Light-Emitting Diodes with Double Hole-Transporting Structure.

A blue organic light-emitting diode with a double hole-transporting (DHT) structure has been developed. The device, ITO/N,N'-Bis (naphthalene-1-yl)-N,N'-bis(phenyl)-benzidine/4,4'-Bis (N-carbazolyl)-1,1'-biphenyl (CBP)/4,4'-Bis(2,2-diphenylethen-yl) diphenyl/CBP/tris(8-hydroxyquinolate)aluminum/lithium fluoride/aluminum, consists of a hole-transporting layer, a DHT structure layer and an electron-transporting layer. The blue color purity is improved by modulation the thickness of CBP layer. When the thicknesses of left CBP and right CBP are respectively 8 nm and 2 nm, the more pure blue coordinates (0.155, 0.079) are obtained at 9 V, which are very close to the national television system committee standard blue coordinate (0.14, 0.08). Furthermore the current density, brightness and the luminous efficiency of device with the left CBP of 8 nm and the right CBP of 2 nm are respectively 144.7 mA/cm2, 1065 cd/m2 and 0.93 cd/A at voltage of 9 V.

Surface plasma resonant effect of gold nanoparticles on the photoelectrodes of dye-sensitized solar cells.

In this study, we prepared different shapes of gold nanoparticles by seed-mediated growth method and applied them on the photoelectrodes of dye-sensitized solar cells (DSSCs) to study the surface plasma resonant (SPR) effect of gold nanoparticles on the photoelectrodes of dye-sensitized solar cells. The analyses of field emission scanning electron microscopy show that the average diameter of the spherical gold nanoparticles is 45 nm, the average length and width of the short gold nanorods were 55 and 22 nm, respectively, and the average length and width of the long gold nanorods were 55 and 14 nm, respectively. The aspect ratio of the short and long gold nanorods was about 2.5 and 4, respectively. The results of ultraviolet-visible absorption spectra show that the absorption wavelength is about 540 nm for spherical gold nanoparticles, and the absorption of the gold nanorods reveals two peaks. One is about 510 to 520 nm, and the other is about 670 and 710 nm for the short and long gold nanorods, respectively. The best conversion efficiency of the dye-sensitized solar cells with spherical gold nanoparticles and short and long gold nanorods added in is 6.77%, 7.08%, and 7.29%, respectively, and is higher than that of the cells without gold nanoparticles, which is 6.21%. This result indicates that the effect of gold nanoparticles on the photoelectrodes can increase the conductivity and reduce the recombination of charges in the photoelectrodes, resulting in the increase of conversion efficiency for DSSCs. In addition, the long gold nanorods have stronger SPR effect than the spherical gold nanoparticles and short gold nanorods at long wavelength. This may be the reason for the higher conversion efficiency of DSSCs with long gold nanorods than those of the cells with spherical gold nanoparticles and short gold nanorods.

Effect of TiO2 nanotubes with TiCl4 treatment on the photoelectrode of dye-sensitized solar cells.

In this study, we used the electrochemical anodization to prepare TiO2 nanotube arrays and applied them on the photoelectrode of dye-sensitized solar cells. In the field emission scanning electron microscopy analysis, the lengths of TiO2 nanotube arrays prepared by electrochemical anodization can be obtained with approximately 10 to 30 µm. After titanium tetrachloride (TiCl4) treatment, the walls of TiO2 nanotubes were coated with TiO2 nanoparticles. XRD patterns showed that the oxygen-annealed TiO2 nanotubes have a better anatase phase. The conversion efficiency with different lengths of TiO2 nanotube photoelectrodes is 3.21%, 4.35%, and 4.34% with 10, 20, and 30 µm, respectively. After TiCl4 treatment, the efficiency of TiO2 nanotube photoelectrode for dye-sensitized solar cell can be improved up to 6.58%. In the analysis of electrochemical impedance spectroscopy, the value of Rk (charge transfer resistance related to recombination of electrons) decreases from 26.1 to 17.4 Ω when TiO2 nanotubes were treated with TiCl4. These results indicate that TiO2 nanotubes treated with TiCl4 can increase the surface area of TiO2 nanotubes, resulting in the increase of dye adsorption and have great help for the increase of the conversion efficiency of DSSCs.

Investigation of hole transport layer in relation to the properties of organic solar cells.

Organic solar cells based on a blend of copper phthalocyanine and bulk fullerene are fabricated with a double hole transport layer system. The double hole transport layer was composed of poly3,4-ethylenedioxythiophene:polystyrenesulfonate, and copper phthalocyanine and inserted between the anode and active layer. The double hole transport layer system utilizes advantages of both layer. The poly3,4-ethylenedioxythiophene:polystyrenesulfonate layer modifies the surface morphology of the ITO anode and the copper phthalocyanine layer enhances hole transport. In order to enhance the conductivity of the modification layer, the optimal amount of glycerol is doped into poly3,4-ethylenedioxythiophene:polystyrenesulfonate. Furthermore, the photovoltaic characteristics are further improved. Insertion of the double hole transport layer with a 4 nm-thick copper phthalocyanine layer resulted in open circuit voltage, short current, and power conversion efficiency as high as 0.46 V, 8.8 mA/cm2 and 1.37%, respectively.