RESUMO
Insensitivity to external optical feedback is experimentally demonstrated in a self-chaotic deformed square microcavity laser for the first time, to the best of our knowledge. Both the optical and radio frequency (RF) spectra of the microlaser remain unaffected for external optical feedback with feedback strength as high as 9.9â dB. In addition, the autocorrelation function curve exhibits no time-delayed peaks. The insensitivity makes the self-chaotic microcavity laser promising for applications in feedback-insensitive optical sources.
RESUMO
A multiwavelength Brillouin fiber laser (MBFL) with a switchable channel spacing is demonstrated using a 1.55-µm single-mode AlGaInAs/InP hybrid square-rectangular laser as a seeding source. The scheme employs a highly nonlinear fiber loop with a feedback path to generate a 10-GHz-spacing MBFL. Then, assisted by a tunable optical bandpass filter, MBFLs with spacing from 20 GHz to 100 GHz at a step of 10 GHz are generated in another highly nonlinear fiber loop based on the cavity-enhanced four-wave mixing. More than 60 lasing lines with an optical signal-to-noise ratio over 10 dB are obtained successfully in all the switchable spacings. The total output power and the channel spacing of the MBFLs are proved to be stable.
RESUMO
A waveguide-connected deformed circular-side triangular microresonator is proposed and fabricated. Room temperature unidirectional light emission is experimentally demonstrated in the far-field pattern with a divergence angle of 38°. Single mode lasing at 1545.4â nm is realized at an injection current of 12â mA. The emission pattern changes drastically upon the binding of a nanoparticle with radius down to several nanometers, predicting applications in electrically pumped, cost-effective, portable and highly sensitive far-field detection of nanoparticles.
RESUMO
A narrow linewidth optical frequency comb (OFC) based on a directly modulated microcavity laser with external optical feedback is investigated numerically and demonstrated experimentally. Based on the numerical simulations with rate equations, the evolution of the optical and electrical spectra is presented for the direct-modulated microcavity laser with increased feedback strength, and the linewidth property is improved at suitable feedback conditions. The simulation results also show good robustness for the generated OFC in terms of feedback strength and phase. Moreover, the OFC generation experiment is performed by combining with the dual-loop feedback structure to suppress the side mode, and an OFC with a side-mode suppression ratio of 31â dB is realized. Thanks to the high electro-optical response of the microcavity laser, a 15-tone OFC with a frequency interval of 10â GHz is obtained. Finally, the linewidth of each comb tooth is measured to be around 7 kHz under the feedback power of 47 µW, which indicates an enormous compression of approximately 2000 times compared with the free-running continuous-wave microcavity laser.
RESUMO
The emerging hybrid integrated quantum photonics combines the advantages of different functional components into a single chip to meet the stringent requirements for quantum information processing. Despite the tremendous progress in hybrid integrations of III-V quantum emitters with silicon-based photonic circuits and superconducting single-photon detectors, on-chip optical excitations of quantum emitters via miniaturized lasers towards single-photon sources (SPSs) with low power consumptions, small device footprints, and excellent coherence properties is highly desirable yet illusive. In this work, we present realizations of bright semiconductor SPSs heterogeneously integrated with on-chip electrically-injected microlasers. Different from previous one-by-one transfer printing technique implemented in hybrid quantum dot (QD) photonic devices, multiple deterministically coupled QD-circular Bragg Grating (CBG) SPSs were integrated with electrically-injected micropillar lasers at one time via a potentially scalable transfer printing process assisted by the wide-field photoluminescence (PL) imaging technique. Optically pumped by electrically-injected microlasers, pure single photons are generated with a high-brightness of a count rate of 3.8 M/s and an extraction efficiency of 25.44%. Such a high-brightness is due to the enhancement by the cavity mode of the CBG, which is confirmed by a Purcell factor of 2.5. Our work provides a powerful tool for advancing hybrid integrated quantum photonics in general and boosts the developments for realizing highly-compact, energy-efficient and coherent SPSs in particular.
RESUMO
An optical black-hole cavity based on transformation optics enables Q-factor enhancement and strong field confinement, by eliminating the intrinsic radiation loss of the conventional whispering-gallery modes, holding potential for applications in energy harvesting and optoelectronics.
RESUMO
Liquid-crystal microcavity lasers have attracted considerable attention because of their extraordinary tunability and sensitive response to external stimuli, and because they operate generally within a specific phase. Here, we demonstrate a liquid-crystal microcavity laser operated in the phase transition in which the reorientation of liquid-crystal molecules occurs from aligned to disordered states. A significant wavelength shift of the microlaser is observed, resulting from the dramatic changes in the refractive index of liquid-crystal microdroplets during the phase transition. This phase-transition microcavity laser is then exploited for sensitive thermal sensing, enabling a two-order-of-magnitude enhancement in sensitivity compared with the nematic-phase microlaser operated far from the transition point. Experimentally, we demonstrate an exceptional sensitivity of -40 nm/K and an ultrahigh resolution of 320 µK. The phase-transition microcavity laser features compactness, softness, and tunability, showing great potential for high-performance sensors, optical modulators, and soft matter photonics.
RESUMO
The pursuit of compact lasers with low thresholds has imposed strict requirements on tight light confinements with minimized radiation losses. Bound states in the continuum (BICs) have been recently demonstrated as an effective mechanism to trap light. However, most reported BIC lasers are still bulky due to the absence of in-plane light confinement. Here, we combine BICs and photonic bandgaps to realize three-dimensional light confinements, as referred to miniaturized BICs (mini-BICs). We demonstrate highly compact active mini-BIC resonators with a record high-quality (Q) factor of up to 32,500, which enables single-mode lasing with the lowest threshold of 80 W/cm2 among the reported BIC lasers. In addition, photon statistics measurements further confirm the occurrence of the stimulated emission in our devices. Our work reveals a path toward compact BIC lasers with ultralow power consumption and potentially boosts the applications in cavity quantum electrodynamics, nonlinear optics, and integrated photonics.
RESUMO
Mode selection is crucial to achieving stable single-mode lasing in microlasers. Here, we demonstrate experimentally a dual-port square microresonator for single-mode lasing with a side-mode-suppression ratio (SMSR) exceeding 40â dB. By connecting waveguides at two opposite vertices, the quality factor for the antisymmetric mode (ASM) is much higher than that of the symmetric mode (SM), enabling single-mode lasing. Furthermore, far-field interference patterns similar to Young's two-slit interference are observed. This microlaser is capable of providing two optical sources simultaneously for optical signal processing in high-density integrated photonic circuits.
RESUMO
Label-free sensors are highly desirable for biological analysis and early-stage disease diagnosis. Optical evanescent sensors have shown extraordinary ability in label-free detection, but their potentials have not been fully exploited because of the weak evanescent field tails at the sensing surfaces. Here, we report an ultrasensitive optofluidic biosensor with interface whispering gallery modes in a microbubble cavity. The interface modes feature both the peak of electromagnetic-field intensity at the sensing surface and high-Q factors even in a small-sized cavity, enabling a detection limit as low as 0.3 pg/cm2 The sample consumption can be pushed down to 10 pL due to the intrinsically integrated microfluidic channel. Furthermore, detection of single DNA with 8 kDa molecular weight is realized by the plasmonic-enhanced interface mode.
Assuntos
Técnicas Biossensoriais/métodos , Microfluídica/métodos , Nanotecnologia/métodosRESUMO
We propose a novel deformed square resonator which has four asymmetric circular sides. Photons leak out from specific points, depending on the interplay between stable islands and unstable manifolds in phase space. By carefully breaking the mirror reflection symmetry, optical modes with strong chirality approaching 1 and unidirectional emission can be achieved simultaneously. Upon binding of a nanoparticle, the far-field emission pattern of the deformed microcavity changes drastically. Due to the EP point of the degenerate mode pairs in the deformed cavity, chirality-based far-field detection of nanoparticles with ultra-small size can be realized.
RESUMO
Optical microresonators have attracted intense interests in highly sensitive molecular detection and optical precision measurement in the past decades. In particular, the combination of a high quality factor with a small mode volume significantly enhances the nonlinear light-matter interaction in whispering-gallery mode (WGM) microresonators, which greatly boost nonlinear optical sensing applications. Nonlinear WGM microsensors not only allow for label-free detection of molecules with an ultrahigh sensitivity but also support new functionalities in sensing such as the specific spectral fingerprinting of molecules with frequency conversion involved. Here, we review the mechanisms, sensing modalities, and recent progresses of nonlinear optical sensors along with a brief outlook on the possible future research directions of this rapidly advancing field.
RESUMO
A high-Q hybrid plasmonic-photonic microresonator, which consists of a dielectric microdisk hybridized with a plasmonic nanoantenna dimer, enables an enlarged local density of states of the optical field and chiral propagation of photons inside the cavity.
RESUMO
In the study, the chemically-derived reduced graphene oxide flakes on the pyramidal Si substrate to construct the heterojunction solar cells via simple spin-coating process have been presented. The total reflectance of chemically-derived graphene on pyramidal Si is ~12% at the wavelength of 550 nm which is remarkably reduced compared with that of reduced graphene oxide on planar Si. By modifying the density and distribution of reduced graphene oxide flakes on Si, the power conversion efficiency of 5.20% is achieved. Additionally, the simulated absorbance of different-thick graphene is implemented to optimize the performance of graphene/pyramidal Si devices. The fabrication technique for rGO-based devices has the merits of simplicity, large scale, high throughput and low cost, which is a new starting point in the direction of graphene-based material for the applications of next generation optoelectronics.
RESUMO
OBJECTIVES: Elderly persons with low muscle mass (LMM) or sarcopenia are prone to frailty and functional decline. This study aimed to investigate the relationship between serum selenium level and skeletal muscle mass in community-dwelling elderly. DESIGN: Cross-sectional observational study. SETTING AND PARTICIPANTS: A total of 327 elderly Taipei citizens (mean age 71.5 ± 4.7 years) were recruited from the community. MEASUREMENTS: Skeletal muscle mass was measured by bioelectrical impedance analysis. LMM was defined by low skeletal muscle index (SMI: muscle mass (kg)/[height (m)](2)). All participants were further divided into quartiles by serum selenium level and the risk for LMM among these quartiles was examined using multivariate logistic regression analyses. Estimated serum selenium levels for the LMM group vs the normal group and estimated SMI in the quartiles of serum selenium were computed by least square method in linear regression models. RESULTS: The estimated mean (±standard deviation) of serum selenium level was significantly lower in the LMM group compared with the normal group after adjusting for confounders (1.01 ± 0.03 µmol/L vs 1.14 ± 0.02 µmol/L, P < .001). After adjusting for age, sex, lifestyle, and physical and metabolic factors, the odds ratios (95% confidence interval, P value) of LMM in the bottom, second, and third selenium quartile groups were 4.62 (95% CI 2.11-10.10, P < .001), 2.30 (95% CI 1.05-5.03, P < .05) and 1.51 (95% CI 0.66-3.46, P = .327), respectively, compared with the top quartile group of serum selenium level. The least square mean of SMI increased with the quartiles of serum selenium (P < .001). CONCLUSIONS: This is the first study to demonstrate that low serum selenium is independently associated with low muscle mass in the elderly. The causality and underlying mechanism between selenium and low muscle mass or sarcopenia warrant further research.
Assuntos
Músculo Esquelético/fisiologia , Selênio/sangue , Idoso , Estudos Transversais , Impedância Elétrica , Humanos , Características de Residência , TaiwanRESUMO
OBJECTIVE: To develop an internet-based expert diagnostic system for common respiratory diseases. METHODS: SaaS system was used to build architecture; pattern of forward reasoning was applied for inference engine design; ASP.NET with C# from the tool pack of Microsoft Visual Studio 2005 was used for website-interview medical expert system.The database of the system was constructed with Microsoft SQL Server 2005. RESULTS: The developed expert system contained large data memory and high efficient function of data interview and data analysis for diagnosis of various diseases.The users were able to perform this system to obtain diagnosis for common respiratory diseases via internet. CONCLUSION: The developed expert system may be used for internet-based diagnosis of various respiratory diseases,particularly in telemedicine setting.
Assuntos
Diagnóstico por Computador , Sistemas Inteligentes , Doenças Respiratórias/diagnóstico , Internet , TelemedicinaRESUMO
We demonstrate that the nonlinear optomechanical interaction leads to parametric down-conversion, capable of generating polariton pairs formed by photons and phonons. The nonlinearity is resonantly enhanced through frequency matching, and such parametric down-conversion does not require the stringent condition that the single-photon optomechanical coupling strength g be on the order of the mechanical resonance frequency ω(m). We provide analytical results for the frequency matching condition and derive the nonlinear coefficient. Numerical simulations on polariton pair generation are presented, showing that photonlike polaritons, phononlike polaritons, and mixed photon-phonon polaritons can be selectively generated. Such nonlinear interaction offers a promising way for harnessing the optomechanical nonlinearity to manipulate photons and phonons.