Plant polysaccharides extracted by high pressure: A review on yields, physicochemical, structure properties, and bioactivities.

Polysaccharides are biologically essential macromolecules, widely exist in plants, which are used in food, medicine, bioactives' encapsulation, targeted delivery and other fields. Suitable extraction technology can not only improve the yield, but also regulate the physicochemical, improve the functional property, and is the basis for the research and application of polysaccharide. High pressure (HP) extraction (HPE) induces the breakage of raw material cells and tissues through rapid changes in pressure, increases extraction yield, reduces extraction time, and modifies structure of polysaccharides. However, thus far, literature review on the mechanism of extraction, improved yield and modified structure of HPE polysaccharide is lacking. Therefore, the present work reviews the mechanism of HPE polysaccharide, increasing extraction yield, regulating physicochemical and functional properties, modifying structure and improving activity. This review contributes to a full understanding of the HPE or development of polysaccharide production and modification methods and promotes the application of HP technology in polysaccharide production.

Dormancy break, sprouting and later tuber reproduction in response to different tuber sizes of tiger nut (Cyperus esculentus L.).

Dormancy release pattern, sprout growth and later reproduction were studied among various tuber sizes of Cyperus esculentus to determine effective methods to release dormancy and further to select suitable tuber size of this species in production. The results showed that medium tubers performed better during sprouting than large and small tubers under all pre-sprouting treatments. Pre-sprouting treatments at 25°C, 35°C, RT (room temperature) and -2°C were effective in relieving dormancy in medium tubers. Tiller number from medium tubers were significantly higher under 25°C, RT and 45°C than under 35°C and -2°C. Shoot and root mass from medium tubers were significantly higher under the 25°C, 35°C and RT than under other treatments. Tiller and tuber numbers both decreased with decreasing tuber size, as did tuber yield after three months of growth. Furthermore, leftover mass decreased with decreasing tuber mass and remained unchanged at sprouting and maturity periods. A significantly negative allometric correlation was found between plant mass and tuber mass from small tubers. However, a significantly positive allometric correlation was found between tuber size and tuber number from large tubers. In conclusion, medium tubers had a competitive advantage in sprouting, growth and reproduction.

Essential role of lattice oxygen in methanol electrochemical refinery toward formate.

Developing technologies based on the concept of methanol electrochemical refinery (e-refinery) is promising for carbon-neutral chemical manufacturing. However, a lack of mechanism understanding and material properties that control the methanol e-refinery catalytic performances hinders the discovery of efficient catalysts. Here, using 18O isotope-labeled catalysts, we find that the oxygen atoms in formate generated during the methanol e-refinery reaction can originate from the catalysts' lattice oxygen and the O-2p-band center levels can serve as an effective descriptor to predict the catalytic performance of the catalysts, namely, the formate production rates and Faradaic efficiencies. Moreover, the identified descriptor is consolidated by additional catalysts and theoretical mechanisms from density functional theory. This work provides direct experimental evidence of lattice oxygen participation and offers an efficient design principle for the methanol e-refinery reaction to formate, which may open up new research directions in understanding and designing electrified conversions of small molecules.

Joint Entity and Relation Extraction With Set Prediction Networks.

Joint entity and relation extraction is an important task in natural language processing, which aims to extract all relational triples mentioned in a given sentence. In essence, the relational triples mentioned in a sentence are in the form of a set, which has no intrinsic order between elements and exhibits the permutation invariant feature. However, previous seq2seq-based models require sorting the set of relational triples into a sequence beforehand with some heuristic global rules, which destroys the natural set structure. In order to break this bottleneck, we treat joint entity and relation extraction as a direct set prediction problem, so that the extraction model is not burdened with predicting the order of multiple triples. To solve this set prediction problem, we propose networks featured by transformers with non-autoregressive parallel decoding. In contrast to autoregressive approaches that generate triples one by one in a specific order, the proposed networks are able to directly output the final set of relational triples in one shot. Furthermore, we also design a set-based loss that forces unique predictions through bipartite matching. Compared with cross-entropy loss that highly penalizes small shifts in triple order, the proposed bipartite matching loss is invariant to any permutation of predictions; thus, it can provide the proposed networks with a more accurate training signal by ignoring triple order and focusing on relation types and entities. Various experiments on two benchmark datasets demonstrate that our proposed model significantly outperforms the current state-of-the-art (SoTA) models. Training code and trained models are now publicly available at http://github.com/DianboWork/SPN4RE.

Navigating surface reconstruction of spinel oxides for electrochemical water oxidation.

Understanding and mastering the structural evolution of water oxidation electrocatalysts lays the foundation to finetune their catalytic activity. Herein, we demonstrate that surface reconstruction of spinel oxides originates from the metal-oxygen covalency polarity in the MT-O-MO backbone. A stronger MO-O covalency relative to MT-O covalency is found beneficial for a more thorough reconstruction towards oxyhydroxides. The structure-reconstruction relationship allows precise prediction of the reconstruction ability of spinel pre-catalysts, based on which the reconstruction degree towards the in situ generated oxyhydroxides can be controlled. The investigations of oxyhydroxides generated from spinel pre-catalysts with the same reconstruction ability provide guidelines to navigate the cation selection in spinel pre-catalysts design. This work reveals the fundamentals for manipulating the surface reconstruction of spinel pre-catalysts for water oxidation.

Transcriptome and metabolome analyses reveal anthocyanins pathways associated with fruit color changes in plum (Prunus salicina Lindl.).

Plum (Prunus salicina Lindl.) is one of the most widely cultivated and important fruit trees in temperate and cold regions. Fruit color is a significant trait relating to fruit quality in plum. However, its development mechanism has not been studied from the aspects of transcriptional regulation and metabolomic progress. To reveal the mechanism of fruit color developments in plums, we selected the fruits of two plum cultivars, 'Changli84' (Ch84, red fruit) and 'Dahuangganhe' (D, yellow fruit) as plant materials for transcriptome sequencing and metabolomic analysis were performed. Based on the data of transcriptome and metabolome at three fruit developmental stages, young fruit stage, color-change stage, and maturation stage, we identified 2,492 differentially expressed genes (DEGs) and 54 differential metabolites (DMs). The KEGG analysis indicated that "Flavonoid biosynthesis" was significantly enriched during three fruit development stages. Some DEGs in the "Flavonoid biosynthesis" pathway, had opposite trends between Ch84 and D, including chalcone synthase (CHS), dihydroflavonol 4-reductase (DFR) and flavonol synthase (FLS). Also, the genes encoding MYB-bHLH-WD (MBW) protein complexes, especially MYBs and bHLHs, showed a close relationship with plum fruit color. In the current study, DMs like procyanidin B1, cyanidin 3-glucoside, and cyanidin-3-O-alpha-arabinopyranoside were key pigments (or precursors), while the carotene and carotenoids did not show key relationships with fruit color. In conclusion, the anthocyanins dominate the color change of plum fruit. Carotenes and carotenoids might be related to the color of plum fruit, but do not play a dominate role.

Enhanced oxygen evolution over dual corner-shared cobalt tetrahedra.

Developing efficient catalysts is of paramount importance to oxygen evolution, a sluggish anodic reaction that provides essential electrons and protons for various electrochemical processes, such as hydrogen generation. Here, we report that the oxygen evolution reaction (OER) can be efficiently catalyzed by cobalt tetrahedra, which are stabilized over the surface of a Swedenborgite-type YBCo4O7 material. We reveal that the surface of YBaCo4O7 possesses strong resilience towards structural amorphization during OER, which originates from its distinctive structural evolution toward electrochemical oxidation. The bulk of YBaCo4O7 composes of corner-sharing only CoO4 tetrahedra, which can flexibly alter their positions to accommodate the insertion of interstitial oxygen ions and mediate the stress during the electrochemical oxidation. The density functional theory calculations demonstrate that the OER is efficiently catalyzed by a binuclear active site of dual corner-shared cobalt tetrahedra, which have a coordination number switching between 3 and 4 during the reaction. We expect that the reported active structural motif of dual corner-shared cobalt tetrahedra in this study could enable further development of compounds for catalyzing the OER.

Lattice site-dependent metal leaching in perovskites toward a honeycomb-like water oxidation catalyst.

Metal leaching during water oxidation has been typically observed in conjunction with surface reconstruction on perovskite oxide catalysts, but the role of metal leaching at each geometric site has not been distinguished. Here, we manipulate the occurrence and process of surface reconstruction in two model ABO3 perovskites, i.e., SrSc0.5Ir0.5O3 and SrCo0.5Ir0.5O3, which allow us to evaluate the structure and activity evolution step by step. The occurrence and order of leaching of Sr (A-site) and Sc/Co (B-site) were controlled by tailoring the thermodynamic stability of B-site. Sr leaching from A-site mainly generates more electrochemical surface area for the reaction, and additional leaching of Sc/Co from B-site triggers the formation of a honeycomb-like IrOxHy phase with a notable increase in intrinsic activity. A thorough surface reconstruction with dual-site metal leaching induces an activity improvement by approximately two orders of magnitude, which makes the reconstructed SrCo0.5Ir0.5O3 among the best for water oxidation in acid.

Active Phase on SrCo1-x Fe x O3-δ (0 ≤ x ≤ 0.5) Perovskite for Water Oxidation: Reconstructed Surface versus Remaining Bulk.

Perovskite oxides based on earth-abundant transition metals have been extensively explored as promising oxygen evolution reaction (OER) catalysts in alkaline media. The (electro)chemically induced transformation of their initially crystalline surface into an amorphous state has been reported for a few highly active perovskite catalysts. However, little knowledge is available to distinguish the contribution of the amorphized surface from that of the remaining bulk toward the OER. In this work, we utilize the promoting effects of two types of Fe modification, i.e., bulk Fe dopant and Fe ions absorbed from the electrolyte, on the OER activity of SrCoO3-δ model perovskite to identify the active phase. Transmission electron microscopy and X-ray photoelectron spectroscopy confirmed the surface amorphization of SrCoO3-δ as well as SrCo0.8Fe0.2O3-δ after potential cycling in Fe-free KOH solution. By further cycling in Fe-spiked electrolyte, Fe was incorporated into the amorphized surface of SrCoO3-δ (SrCoO3-δ + Fe3+), yielding approximately sixfold increase in activity. Despite the difference in remaining perovskites, SrCoO3-δ + Fe3+ and SrCo0.8Fe0.2O3-δ exhibited remarkably similar activity. These results reflect that the in situ developed surface species are directly responsible for the measured OER activity, whereas the remaining bulk phases have little impact.

High-Performance Perovskite Composite Electrocatalysts Enabled by Controllable Interface Engineering.

Single-phase perovskite oxides that contain nonprecious metals have long been pursued as candidates for catalyzing the oxygen evolution reaction, but their catalytic activity cannot meet the requirements for practical electrochemical energy conversion technologies. Here a cation deficiency-promoted phase separation strategy to design perovskite-based composites with significantly enhanced water oxidation kinetics compared to single-phase counterparts is reported. These composites, self-assembled from perovskite precursors, comprise strongly interacting perovskite and related phases, whose structure, composition, and concentration can be accurately controlled by tailoring the stoichiometry of the precursors. The composite catalyst with optimized phase composition and concentration outperforms known perovskite oxide systems and state-of-the-art catalysts by 1-3 orders of magnitude. It is further demonstrated that the strong interfacial interaction of the composite catalysts plays a key role in promoting oxygen ionic transport to boost the lattice-oxygen participated water oxidation. These results suggest a simple and viable approach to developing high-performance, perovskite-based composite catalysts for electrochemical energy conversion.

Recent Development of Oxygen Evolution Electrocatalysts in Acidic Environment.

The proton exchange membrane (PEM) water electrolysis is one of the most promising hydrogen production techniques. The oxygen evolution reaction (OER) occurring at the anode dominates the overall efficiency. Developing active and robust electrocatalysts for OER in acid is a longstanding challenge for PEM water electrolyzers. Most catalysts show unsatisfied stability under strong acidic and oxidative conditions. Such a stability challenge also leads to difficulties for a better understanding of mechanisms. This review aims to provide the current progress on understanding of OER mechanisms in acid, analyze the promising strategies to enhance both activity and stability, and summarize the state-of-the-art catalysts for OER in acid. First, the prevailing OER mechanisms are reviewed to establish the physicochemical structure-activity relationships for guiding the design of highly efficient OER electrocatalysts in acid with stable performance. The reported approaches to improve the activity, from macroview to microview, are then discussed. To analyze the problem of instability, the key factors affecting catalyst stability are summarized and the surface reconstruction is discussed. Various noble-metal-based OER catalysts and the current progress of non-noble-metal-based catalysts are reviewed. Finally, the challenges and perspectives for the development of active and robust OER catalysts in acid are discussed.

Anodic Oxidation Enabled Cation Leaching for Promoting Surface Reconstruction in Water Oxidation.

A rational design for oxygen evolution reaction (OER) catalysts is pivotal to the overall efficiency of water electrolysis. Much work has been devoted to understanding cation leaching and surface reconstruction of very active electrocatalysts, but little on intentionally promoting the surface in a controlled fashion. We now report controllable anodic leaching of Cr in CoCr2 O4 by activating the pristine material at high potential, which enables the transformation of inactive spinel CoCr2 O4 into a highly active catalyst. The depletion of Cr and consumption of lattice oxygen facilitate surface defects and oxygen vacancies, exposing Co species to reconstruct into active Co oxyhydroxides differ from CoOOH. A novel mechanism with the evolution of tetrahedrally coordinated surface cation into octahedral configuration via non-concerted proton-electron transfer is proposed. This work shows the importance of controlled anodic potential in modifying the surface chemistry of electrocatalysts.

Efficient Water Splitting Actualized through an Electrochemistry-Induced Hetero-Structured Antiperovskite/(Oxy)Hydroxide Hybrid.

Exploring active, stable, and low-cost bifunctional electrocatalysts for oxygen evolution reaction (OER) and hydrogen evolution reaction (HER) is crucial for water splitting technology associated with renewable energy storage in the form of hydrogen fuel. Here, a newly designed antiperovskite-based hybrid composed of a conductive InNNi3 core and amorphous InNi(oxy)hydroxide shell is first reported as promising OER/HER bifunctional electrocatalyst. Prepared by a facile electrochemical oxidation strategy, such unique hybrid (denoted as EO-InNNi3 ) exhibits excellent OER and HER activities in alkaline media, benefiting from the inherent high-efficiency HER catalytic nature of InNNi3 antiperovskite and the promoting role of OER-active InNi(oxy)hydroxide thin film, which is confirmed by theoretical simulations and in situ Raman studies. Moreover, an alkaline electrolyzer integrated EO-InNNi3 as both anode and cathode delivers a low voltage of 1.64 V at 10 mA cm-2 , while maintaining excellent durability. This work demonstrates the application of antiperovskite-based materials in the field of overall water splitting and inspires insights into the development of advanced catalysts for various energy applications.

Direct evidence of boosted oxygen evolution over perovskite by enhanced lattice oxygen participation.

The development of oxygen evolution reaction (OER) electrocatalysts remains a major challenge that requires significant advances in both mechanistic understanding and material design. Recent studies show that oxygen from the perovskite oxide lattice could participate in the OER via a lattice oxygen-mediated mechanism, providing possibilities for the development of alternative electrocatalysts that could overcome the scaling relations-induced limitations found in conventional catalysts utilizing the adsorbate evolution mechanism. Here we distinguish the extent to which the participation of lattice oxygen can contribute to the OER through the rational design of a model system of silicon-incorporated strontium cobaltite perovskite electrocatalysts with similar surface transition metal properties yet different oxygen diffusion rates. The as-derived silicon-incorporated perovskite exhibits a 12.8-fold increase in oxygen diffusivity, which matches well with the 10-fold improvement of intrinsic OER activity, suggesting that the observed activity increase is dominantly a result of the enhanced lattice oxygen participation.

Self-Assembled Ruddlesden-Popper/Perovskite Hybrid with Lattice-Oxygen Activation as a Superior Oxygen Evolution Electrocatalyst.

The oxygen evolution reaction (OER) is pivotal in multiple gas-involved energy conversion technologies, such as water splitting, rechargeable metal-air batteries, and CO2 /N2 electrolysis. Emerging anion-redox chemistry provides exciting opportunities for boosting catalytic activity, and thus mastering lattice-oxygen activation of metal oxides and identifying the origins are crucial for the development of advanced catalysts. Here, a strategy to activate surface lattice-oxygen sites for OER catalysis via constructing a Ruddlesden-Popper/perovskite hybrid, which is prepared by a facile one-pot self-assembly method, is developed. As a proof-of-concept, the unique hybrid catalyst (RP/P-LSCF) consists of a dominated Ruddlesden-Popper phase LaSr3 Co1.5 Fe1.5 O10-δ (RP-LSCF) and second perovskite phase La0.25 Sr0.75 Co0.5 Fe0.5 O3-δ (P-LSCF), displaying exceptional OER activity. The RP/P-LSCF achieves 10 mA cm-2 at a low overpotential of only 324 mV in 0.1 m KOH, surpassing the benchmark RuO2 and various state-of-the-art metal oxides ever reported for OER, while showing significantly higher activity and stability than single RP-LSCF oxide. The high catalytic performance for RP/P-LSCF is attributed to the strong metal-oxygen covalency and high oxygen-ion diffusion rate resulting from the phase mixture, which likely triggers the surface lattice-oxygen activation to participate in OER. The success of Ruddlesden-Popper/perovskite hybrid construction creates a new direction to design advanced catalysts for various energy applications.

MiR-139-5p influences hepatocellular carcinoma cell invasion and proliferation capacities via decreasing SLITRK4 expression.

The microRNA, miR-139-5p, has been proved to play important roles in regulating tumor progression, including prostate cancer, osteosarcoma, esophageal cancer, and so on, but its correlation of hepatocellular carcinoma (HCC) still remains unclear. Here we found that hsa-miR-139-5p (miR-139-5p) was decreased in HCC samples compared with normal liver tissues, and a lower expression of miR-139-5p was connected to a poorer prognosis. Mechanism study indicated that a decreased/increased miR-139-5p could increase/decrease HCC cells invasion and proliferation capacities via increasing SLITRK4 expression, what's more, the reverse assays also confirmed the conclusion when we knocked down SLITRK4 in the miR-139-5p low-expression cells. Luciferase assay confirmed that miR-139-5p could directly bind to the 3'UTR of SLITRK4 mRNA to regulate its expression. Together, these findings show the importance of miR-139-5p/SLITRK4 pathway in HCC growth and progression and may provide new targets for us to better arrange the progression of HCC.

A Cobalt-Free Multi-Phase Nanocomposite as Near-Ideal Cathode of Intermediate-Temperature Solid Oxide Fuel Cells Developed by Smart Self-Assembly.

An ideal solid oxide fuel cell (SOFC) cathode should meet multiple requirements, i.e., high activity for oxygen reduction reaction (ORR), good conductivity, favorable stability, and sound thermo-mechanical/chemical compatibility with electrolyte, while it is very challenging to achieve all these requirements based on a single-phase material. Herein, a cost-effective multi-phase nanocomposite, facilely synthesized through smart self-assembly at high temperature, is developed as a near-ideal cathode of intermediate-temperature SOFCs, showing high ORR activity (an area-specific resistance of ≈0.028 Ω cm2 and a power output of 1208 mW cm-2 at 650 °C), affordable conductivity (21.5 S cm-1 at 650 °C), favorable stability (560 h operation in single cell), excellent chemical compatibility with Sm0.2 Ce0.8 O1.9 electrolyte, and reduced thermal expansion coefficient (≈16.8 × 10-6 K-1 ). Such a nanocomposite (Sr0.9 Ce0.1 Fe0.8 Ni0.2 O3- δ ) is composed of a single perovskite main phase (77.2 wt%), a Ruddlesden-Popper (RP) second phase (13.3 wt%), and surface-decorated NiO (5.8 wt%) and CeO2 (3.7 wt%) minor phases. The RP phase promotes the oxygen bulk diffusion while NiO and CeO2 nanoparticles facilitate the oxygen surface process and O2- migration from the surface to the main phase, respectively. The strong interaction between four phases in nanodomain creates a synergistic effect, leading to the superior ORR activity.

Chlorine-Doped Perovskite Oxide: A Platinum-Free Cathode for Dye-Sensitized Solar Cells.

Triiodide/iodide (I3-/I-) redox couple-mediated solar cells, batteries, and electrochromic devices require highly efficient and stable electrocatalysts for I3- reduction reaction (IRR) to overcome performance limitations, whereas the widely used platinum (Pt) cathode for IRR has limitations of high price and unfavorable durability. In this work, we present a halogen element (chlorine) doping strategy to design low-cost perovskite-type electrocatalysts with enhanced IRR activity and stability. The dye-sensitized solar cell (DSSC) assembled by the LaFeO2.965-δCl0.035 cathode delivers an attractive power conversion efficiency (PCE) of 11.4% with a remarkable PCE enhancement factor of 23% compared with Pt, which is higher than most of the reported non-Pt DSSC cathodes. Attractively, LaFeO2.965-δCl0.035 displays superior IRR activity/stability and structural stability in the I3-/I--based electrolyte compared to pristine LaFeO3 because chlorine doping facilitates the creation of oxygen vacancies (active sites) and enhances surface acidity simultaneously. This study provides a new way for designing outstanding IRR electrocatalysts, which could be applied to many redox couple-mediated photo/electrochemical devices.

Rationally designed Water-Insertable Layered Oxides with Synergistic Effect of Transition-Metal Elements for High-Performance Oxygen Evolution Reaction.

Oxygen evolution reaction (OER) is a key step in many energy conversion and storage processes. Here, by rationally adding an appropriate amount of Mn into the lattice of a layered NaxCoO2 parent oxide, high solubility of iron into the NaxCoO2 oxide lattice is realized without the use of an extremely air-sensitive Na2O2 raw material, and the synergy created between the Co and Fe can boost the catalytic activity of the layered oxide for OER. Moreover, the water intercalation capability of the layered oxides can be utilized to make the oxide resemble mixed metal hydroxides, which will also bring a beneficial effect for OER. As a result, the as-developed Na0.67Mn0.5Co0.3Fe0.2O2 (CF-32) layered oxide with an optimal Co/Fe ratio and water intercalation shows high OER performance in alkaline media, overperforming the benchmark IrO2 catalyst. In 0.1 M KOH solution, the novel catalyst shows 0.39 V overpotential at 10 mA cm-2 and favorable stability. The excellent OER performance of CF-32 is due to the synergistic effect of transition-metal elements (Co and Fe) and water intercalation, leading to little charge transfer resistance, large amounts of exposed catalytic active sites, plenty of surface high oxidation state O22-/O- oxygen species, and hydroxide-rich surface. The facile synthesis and high OER performance of CF-32 enriches the non-noble metal family of OER catalysts and boosts the practical application of non-noble metal catalysts.

Exceptionally active iridium evolved from a pseudo-cubic perovskite for oxygen evolution in acid.

Exploring robust catalysts for water oxidation in acidic electrolyte is challenging due to the limited material choice. Iridium (Ir) is the only active element with a high resistance to the acid corrosion during water electrolysis. However, Ir is rare, and its large-scale application could only be possible if the intrinsic activity of Ir could be greatly enhanced. Here, a pseudo-cubic SrCo0.9Ir0.1O3-δ perovskite, containing corner-shared IrO6 octahedrons, is designed. The Ir in the SrCo0.9Ir0.1O3-δ catalyst shows an extremely high intrinsic activity as reflected from its high turnover frequency, which is more than two orders of magnitude higher than that of IrO2. During the electrochemical cycling, a surface reconstruction, with Sr and Co leaching, over SrCo0.9Ir0.1O3-δ occurs. Such reconstructed surface region, likely contains a high amount of structural domains with corner-shared and under-coordinated IrOx octahedrons, is responsible for the observed high activity.