Synthesis of palladium-decorated defective tungsten oxide heterostructures with enhanced photothermal catalytic activity for hydrodeoxygenation of vanillin.

The selective hydrodeoxygenation (HDO) of sustainable lignocellulosic biomass plays a pivotal role in the conversion of biomass into high-value fuels and chemicals. Nevertheless, HDO for biomass upgrading always demands high temperatures and high hydrogen (H2) pressure. Photothermal catalysis has been recognized as an effective approach for boosting chemical reactions under mild conditions while maintaining superior selectivity. Herein, we report the design of palladium-decorated defective tungsten oxide (Pd/WO3-x) catalysts with enhanced photothermal catalytic performances for the efficient HDO of vanillin. Pd/WO3-x nanoflowers have been synthesized through a solvothermal/in-situ reduction two-step strategy, and they exhibit notable photoabsorption in a wide range (200-1100 nm), high photothermal conversion and efficient charge separation efficiency. Under simulated sunlight irradiation (0.3 W cm-2), Pd/WO3-x exhibits a maximum vanillin conversion up to 86.8 % with a 2-methoxy-4-methylphenol (MMP) selectivity of 100 %, which is obviously higher than that (vanillin conversion = 33.1 %, MMP selectivity = 100 %) in the oil bath at the same temperature. Such higher conversion efficiency and selectivity under sunlight should result from the synergistic integration of hot electrons and photothermal heating, both of which are derived from localized surface plasmon resonance (LSPR) in WO3-x. Importantly, Pd/WO3-x catalyst demonstrates good stability and high selectivity to MMP even after 5 cycles. This work may offer a novel viewpoint on the advancement of photothermal catalysts and the realization of photothermal catalytic biomass conversion under mild conditions.

Free-space coupled, large-active-area superconducting microstrip single-photon detector for photon-counting time-of-flight imaging.

Numerous applications at the photon-starved regime require a free-space coupling single-photon detector with a large active area, low dark count rate (DCR), and superior time resolutions. Here, we developed a superconducting microstrip single-photon detector (SMSPD), with a large active area of 260 µm in diameter, a DCR of ∼5k c p s, and a low time jitter of ∼171p s, operated at a near-infrared of 1550 nm and a temperature of ∼2.0K. As a demonstration, we applied the detector to a single-pixel galvanometer scanning system and successfully reconstructed the object information in depth and intensity using a time-correlated photon counting technology.

Nonlinear Optics: feature issue introduction.

This joint issue of Optics Express and Optical Materials Express showcases 29 articles that report the latest advancements in nonlinear optics. These articles include contributions from authors who participated in the Optica Nonlinear Optics Topical Meeting, which took place in Honolulu, Hawaii, from July 10th to July 14th, 2023. The conference was organized by Optica (formerly known as OSA). As an introduction, the editors provide a summary of these articles, which cover a broad range of topics in nonlinear optics, spanning from fundamental nonlinear optical concepts to novel nonlinear effects, and from innovative nonlinear materials to topics such as ultrafast optics, machine learning empowered nonlinear optics, and unconventional applications. This diverse array of contributions reflects the dynamic and interdisciplinary nature of contemporary research in the field of nonlinear optics while showcasing some of the most recent developments.

Biomechanical analysis of a new cannulated screw for unstable femoral neck fractures.

Background: The treatment of unstable femoral neck fractures (FNFs) remains a challenge. In this study, a new cannulated screw for unstable FNFs was designed to provide a new approach for the clinical treatment of these injuries, and its biomechanical stability was analyzed using finite element analysis and mechanical tests. Methods: An unstable FNF model was established. An internal fixation model with parallel inverted triangular cannulated screws (CSs) and a configuration with two superior cannulated screws and one inferior new cannulated screw (NCS) were used. The biomechanical properties of the two fixation methods were compared and analyzed by using finite element analysis and mechanical tests. Results: The NCS model outperformed the CSs model in terms of strain and stress distribution in computer-simulated reconstruction of the inverted triangular cannulated screw fixation model for unstable FNFs. In the biomechanical test, the NCS group showed significantly smaller average femoral deformation (1.08 ± 0.15 mm vs. 1.50 ± 0.37 mm) and fracture line displacement (1.43 ± 0.30 mm vs. 2.01 ± 0.47 mm). In the NCS group, the mean stiffness was significantly higher than that in the CSs group (729.37 ± 82.20 N/mm vs. 544.83 ± 116.07 N/mm), and the mean compression distance was significantly lower than that in the CSs group (2.87 ± 0.30 mm vs. 4.04 ± 1.09 mm). Conclusion: The NCS combined with two ordinary cannulated screws in an inverted triangle structure to fix unstable FNFs can provide better biomechanical stability than CSs and exhibit a length- and angle-stable construct to prevent significant femoral neck shortening.

Erythrocyte-Membrane-Camouflaged Magnetic Nanocapsules With Photothermal/Magnetothermal Effects for Thrombolysis.

Venous/arterial thrombosis poses significant threats to human health. However, drug-enabled thrombolysis treatment often encounters challenges such as short half-life and low bioavailability. To address these issues, the design of erythrocyte-membrane (EM) camouflaged nanocapsules (USIO/UK@EM) incorporating ultra-small iron oxide (USIO) and urokinase (UK) drug, which exhibits remarkable photothermal/magnetothermal effects and drug delivery ability for venous/arterial thrombolysis, is reported. USIO, UK, and EM are coextruded to fabricate USIO/UK@EM with average sizes of 103.7 nm. As USIO/UK@EM possesses wide photoabsorption and good magnetic properties, its solution demonstrates a temperature increase to 41.8-42.9 °C within 5 min when exposed to an 808 nm laser (0.33 mW cm-2) or alternating magnetic field (AMF). Such photothermal/magnetothermal effect along with UK confers impressive thrombolytic rates of 82.4% and 74.2%, higher than that (≈15%) achieved by UK alone. Further, the EM coating extends the circulating half-life (t1/2 = 3.28 h). When USIO/UK@EM is administered to mice and rabbits, tail vein thrombus in mice and femoral artery thrombus in rabbits can be dissolved by the synergetic effect of thermothrombolysis and UK. Therefore, this study not only offers insights into the rational design of multifunctional biomimetic nanocapsules but also showcases a promising thrombolysis strategy utilizing nanomedicine.

Machine learning reveals ferroptosis features and a novel ferroptosis classifier in patients with sepsis.

OBJECTIVE: Sepsis is an organ malfunction disease that may become fatal and is commonly accompanied by severe complications such as multiorgan dysfunction. Patients who are already hospitalized have a high risk of death due to sepsis. Even though early diagnosis is very important, the technology and clinical approaches that are now available are inadequate. Hence, there is an immediate necessity to investigate biological markers that are sensitive, specific, and reliable for the prompt detection of sepsis to reduce mortality and improve patient prognosis. Mounting research data indicate that ferroptosis contributes to the occurrence, development, and prevention of sepsis. However, the specific regulatory mechanism of ferroptosis remains to be elucidated. This research evaluated the expression profiles of ferroptosis-related genes (FRGs) and the diagnostic significance of the ferroptosis-related classifiers in sepsis. METHODS AND RESULTS: We collected three peripheral blood data sets from septic patients, integrated the clinical examination data and mRNA expression profile of these patients, and identified 13 FRGs in sepsis through a co-expression network and differential analysis. Then, an optimal classifier tool for sepsis was constructed by integrating a variety of machine learning algorithms. Two key genes, ATG16L1 and SRC, were shown to be shared between the algorithms, and thus were identified as the FRG signature of classifier. The tool exhibited satisfactory diagnostic efficiency in the training data set (AUC = 0.711) and two external verification data sets (AUC = 0.961; AUC = 0.913). In the rat cecal ligation puncture sepsis model, in vivo experiments verified the involvement of ATG16L1 and SRC in the early sepsis process. CONCLUSION: These findings confirm that FRGs may participate in the development of sepsis, the ferroptosis related classifiers can provide a basis for the development of new strategies for the early diagnosis of sepsis and the discovery of new potential therapeutic targets for life-threatening infections.

Isolation and Identification of Morganella morganii from Rhesus Monkey (Macaca mulatta) in China.

A bacterium was isolated and identified from the secretion of a rhesus monkey with endometritis. The morphological results showed that the strain exhibited round, convex, gray-white colonies with smooth surfaces and diameters ranging from 1 to 2 mm when cultured on Columbia blood agar at 37 °C for 24 h; on salmonella-shigella agar (S.S.) at 37 °C for 24 h, the colonies appeared round, flat, and translucent. Gram staining showed negative results with blunt ends and non-spore-forming characteristics. Molecular biology results showed that the 16S rRNA sequence of the strain revealed over 96.9% similarity with published sequences of M. morganii from different sources in the NCBI GenBank database. Morphological and molecular biology analysis confirmed that the strain (RM2023) isolated from cervical secretions of rhesus monkey was M. morganii. Drug sensitivity testing demonstrated that the isolated strain (RM2023) was sensitive to ceftriaxone, amikacin, gentamicin, cefazolin, cefuroxime, ceftazidime, levofloxacin, cotrimoxazole, norfloxacin, and tetracycline; moderately sensitive to ampicillin; and resistant to penicillin, vancomycin, ciprofloxacin, and clindamycin. The research findings provide valuable insights for disease prevention in rhesus monkeys and contribute to molecular epidemiological studies.

High-performance flexible p-type Ce-filled Fe3CoSb12 skutterudite thin film for medium-to-high-temperature applications.

P-type Fe3CoSb12-based skutterudite thin films are successfully fabricated, exhibiting high thermoelectric performance, stability, and flexibility at medium-to-high temperatures, based on preparing custom target materials and employing advanced pulsed laser deposition techniques to address the bonding challenge between the thin films and high-temperature flexible polyimide substrates. Through the optimization of fabrication processing and nominal doping concentration of Ce, the thin films show a power factor of >100 µW m-1 K-2 and a ZT close to 0.6 at 653 K. After >2000 bending cycle tests at a radius of 4 mm, only a 6 % change in resistivity can be observed. Additionally, the assembled p-type Fe3CoSb12-based flexible device exhibits a power density of 135.7 µW cm-2 under a temperature difference of 100 K with the hot side at 623 K. This work fills a gap in the realization of flexible thermoelectric devices in the medium-to-high-temperature range and holds significant practical application value.

A Study of the Relationship Between the Severity of Posterior Capsular Opacification Detected by Objective Detection Techniques and Visual Acuity.

PURPOSE: To explore the severity of posterior capsule opacification (PCO) using objective detection techniques and its relationship with visual acuity. SETTING: The First Affiliated Hospital of Soochow University, Suzhou, Jiangsu, China. DESIGN: Prospective cohort study. METHODS: All patients underwent slit-lamp examination, intraocular pressure measurement (IOP), best-corrected visual acuity (BCVA) before neodymium: yttrium aluminium garnet (Nd:YAG) laser capsulotomy, followed by examination after fully dilated, including IOLMaster 700, optical coherence tomography (OCT), Sirius anterior segment analysis system (Sirius), color fundus photography (CFP). Conducting BCVA and IOP post-treatment again. Recording the thickness and density of posterior capsule, color fundus photography quality (CFPQ) and OCT Signal Strength (OCTSS). Analysis using Spearman correlation analysis, heatmaps, and ROC curves. RESULTS: A total of 83 eyes in 78 patients were included in this study. Spearman correlation analysis revealed correlations between pre-treatment BCVA and IOLMaster 700 PCO thickness (MT), IOLMaster 700 cumulative effect (MCE), Sirius PCO thickness (ST), Sirius maximum density (SMD), Sirius cumulative effect (SCE), OCTSS, and CFPQ (correlation coefficients were 0.500, 0.484, 0.465, -0.256, 0.317, -0.442, -0.412, all P＜0.05). The improvement of Vision Acuity (ImpVA) showed correlations with MT, MCE, ST, SCE, OCTSS, and CFPQ (correlation coefficients were -0.452, -0.471, -0.346, -0.278, 0.320, 0.381, all P＜0.05). For ImpVA, the predictive ability of IOLMaster 700 was superior to Sirius, and the joint model was significantly better than single factors. CONCLUSIONS: Posterior capsule thickness and cumulative effect were reliable indicators for evaluating PCO. Compared to Sirius, IOLMaster 700 demonstrates superior predictive ability and higher correlation.

A Functional "Key" Amplified Piezoelectric Effect Modulates ROS Storm with an Open Source for Multimodal Synergistic Cancer Therapy.

Chemodynamic therapy (CDT) is a non-invasive strategy for generating reactive oxygen species (ROS) and is promising for cancer treatment. However, increasing ROS in tumor therapy remains challenging. Therefore, exogenous excitation and inhibition of electron-hole pair recombination are attractive for modulating ROS storms in tumors. Herein, a Ce-doped BiFeO3 (CBFO) piezoelectric sonosensitizer to modulate ROS generation and realize a synergistic mechanism of CDT/sonodynamic therapy and piezodynamic therapy (PzDT) is proposed. The mixed Fe2+ and Ce3+ can implement a circular Fenton/Fenton-like reaction in the tumor microenvironment. Abundant ·OH can be generated by ultrasound (US) stimulation to enhance CDT efficacy. As a typical piezoelectric sonosensitizer, CBFO can produce O2 - owing to the enhanced polarization by the US, resulting in the motion of charge carriers. In addition, CBFO can produce a piezoresponse irradiated upon US, which accelerates the migration rate of electrons/holes in opposite directions and results in energy band bending, further achieving toxic ROS production and realizing PzDT. Density functional theory calculations confirmed that Ce doping shortens the diffusion of electrons and improves the conductivity and catalytic activity of CBFO. This distinct US-enhanced strategy emphasizes the effects of doping engineering and piezoelectric-optimized therapy and shows great potential for the treatment of malignant tumors.

Exploring ALK fusion in colorectal cancer: a case series and comprehensive analysis.

Anaplastic lymphoma kinase (ALK) fusion-positive colorectal cancer (CRC) is a rare and chemotherapy-refractory subtype that lacks established and effective treatment strategies. Additionally, the efficacy and safety of ALK inhibitors (ALKi) in CRC remain undetermined. Herein, we examined a series of ALK-positive CRC patients who underwent various lines of ALKi treatment. Notably, we detected an ALK 1196M resistance mutation in a CRC patient who received multiple lines of chemotherapy and ALKi treatment. Importantly, we found that Brigatinib and Lorlatinib demonstrated some efficacy in managing this patient, although the observed effectiveness was not as pronounced as in non-small cell lung cancer cases. Furthermore, based on our preliminary analyses, we surmise that ALK-positive CRC patients are likely to exhibit inner resistance to Cetuximab. Taken together, our findings have important implications for the treatment of ALK-positive CRC patients.

Zinc peroxide-based nanotheranostic platform with endogenous hydrogen peroxide/oxygen generation for enhanced photodynamic-chemo therapy of tumors.

Nanotheranostic platforms, which can respond to tumor microenvironments (TME, such as low pH and hypoxia), are immensely appealing for photodynamic therapy (PDT). However, hypoxia in solid tumors harms the treatment outcome of PDT which depends on oxygen molecules to generate cytotoxic singlet oxygen (1O2). Herein, we report the design of TME-responsive smart nanotheranostic platform (DOX/ZnO2@Zr-Ce6/Pt/PEG) which can generate endogenously hydrogen peroxide (H2O2) and oxygen (O2) to alleviate hypoxia for improving photodynamic-chemo combination therapy of tumors. DOX/ZnO2@Zr-Ce6/Pt/PEG nanocomposite was prepared by the synthesis of ZnO2 nanoparticles, in-situ assembly of Zr-Ce6 as typical metal-organic framework (MOF) on ZnO2 surface, in-situ reduction of Pt nanozymes, amphiphilic lipids surface coating and then doxorubicin (DOX) loading. DOX/ZnO2@Zr-Ce6/Pt/PEG nanocomposite exhibits average sizes of ∼78 nm and possesses a good loading capacity (48.8 %) for DOX. When DOX/ZnO2@Zr-Ce6/Pt/PEG dispersions are intratumorally injected into mice, the weak acidic TEM induces the decomposition of ZnO2 core to generate endogenously H2O2, then Pt nanozymes catalyze H2O2 to produce O2 for alleviating tumor hypoxia. Upon laser (630 nm) irradiation, the Zr-Ce6 component in DOX/ZnO2@Zr-Ce6/Pt/PEG can produce cytotoxic 1O2, and 1O2 generation rate can be enhanced by 2.94 times due to the cascaded generation of endogenous H2O2/O2. Furthermore, the generated O2 can suppress the expression of hypoxia-inducible factor α, and further enable tumor cells to become more sensitive to chemotherapy, thereby leading to an increased effectiveness of chemotherapy treatment. The photodynamic-chemo combination therapy from DOX/ZnO2@Zr-Ce6/Pt/PEG nanoplatform exhibits remarkable tumor growth inhibition compared to chemotherapy or PDT. Thus, the present study is a good demonstration of a TME-responsive nanoplatform in a multimodal approach for cancer therapy.

Elk1 enhances inflammatory cell infiltration and exacerbates acute lung injury/acute respiratory distress syndrome by suppressing Fcgr2b transcription.

OBJECTIVE: Acute lung injury (ALI) and acute respiratory distress syndrome (ARDS) are associated with significant mortality rates. The role of Fcgr2b in the pathogenesis of ALI/ARDS is not fully elucidated. This study aimed to investigate the functions of Fcgr2b in ALI/ARDS and explore its underlying mechanisms. METHODS: Methods: In this study, rat models of ARDS and pulmonary microvascular endothelial cell (PMVEC) injury models were established through the administration of lipopolysaccharide (LPS). The expression levels of Fcgr2b and Elk1 were quantified in both LPS-induced ARDS rats and PMVECs. Subsequent gain- and loss-of-function experiments were conducted, followed by comprehensive assessments of lung tissue for pathomorphological changes, edema, glycogen storage, fibrosis, and infiltration of inflammatory cells. Additionally, bronchoalveolar lavage fluid was analyzed for T-helper 17 (Th17) cell infiltration, inflammatory response, and microvascular permeability to evaluate lung injury severity in ARDS models. Furthermore, the activity, cytotoxicity, apoptosis, and angiogenic potential of PMVECs were assessed to gauge cell injury. The interaction between Elk1 and Fcgr2b was also examined to confirm their regulatory relationship. RESULTS: In the context of LPS-induced ARDS and PMVEC injury, Fcgr2b expression was markedly reduced, whereas Elk1 expression was elevated. Overexpression of Fcgr2b led to a decrease in Th17 cell infiltration and mitigated lung tissue damage in ARDS models, in addition to reducing LPS-induced injury in PMVECs. Elk1 was found to suppress Fcgr2b transcription through the recruitment of histone 3 lysine 9 trimethylation (H3K9me3). Knockdown of Elk1 diminished Th17 cell infiltration and lung tissue damage in ARDS models, and alleviated LPS-induced injury in PMVECs, effects that were reversed upon Fcgr2b upregulation. CONCLUSION: Elk1 negatively regulates Fcgr2b transcription, thereby augmenting the inflammatory response and exacerbating lung injury in LPS-induced ALI/ARDS.

The efficacy of coaxial percutaneous iodine-125 seed implantation combined with arterial infusion chemotherapy for advanced pancreatic cancer: a randomized clinical trial.

BACKGROUND: This study aimed to evaluate the clinical efficacy of coaxial percutaneous Iodine-125 (125I) seed implantation in combination with arterial infusion chemotherapy for the treatment of advanced pancreatic cancer (PC) through a randomized controlled trial. METHODS: A total of 101 patients with advanced PC were randomized into two groups: control group treated with systemic intravenous chemotherapy and experimental group that received 125I seed implantation in combination with arterial infusion chemotherapy. Outcomes, including tumor control, abdominal pain relief, and survival time were compared between these two groups (Trial Registration No. KYKT2018-65). RESULTS: Pretreatment abdominal pain scores were comparable between the two groups, whereas the abdominal pain scores at 1- and 3-month post-treatment were significantly lower in the control group than those in the experimental group (1-month: 3.74 ± 1.54 vs. 4.48 ± 1.46, p = .015; 3-month: 3.64 ± 2.21 vs. 5.40 ± 1.56, p < .001). At 3-month post-treatment, computed tomography (CT) scan revealed a significantly higher disease control rate in the experimental group than that in the control group (94.0% vs. 74.5%, p = .007). The median survival time in the experimental group was significantly longer than that in the control group (15-month vs. 9-month, p < .001). CONCLUSION: The combination of coaxial percutaneous 125I seed implantation with arterial infusion chemotherapy could significantly alleviate abdominal pain, improve tumor control rates, and prolong survival time in patients with advanced PC.

Changes in Spino-pelvic Sagittal Parameters after Oblique Lateral Lumbar Interbody Fusion and Their Correlation with Clinical Outcome.

Objective: The study aimed to evaluate the impact of OLIF on spinal-pelvic sagittal parameters and its correlation with clinical outcomes in patients with degenerative lumbar spondylolisthesis. Methods: A retrospective analysis of 43 patients (23 males, 20 females) with lumbar 4/5 degenerative spondylolisthesis who underwent OLIF from January 2018 to January 2023 was conducted. Key parameters studied included SP, DH, FH, AS, LL, SS, PT, PI, and LASD. Results: All surgeries were successfully completed according to the original plan, and the minimum follow-up time was greater than 6 months, with a mean operation time of 198.21±51.32 min; the mean intraoperative bleeding volume was 121.00±56.88 ml. The VAS score of lumbar pain and ODI index decreased from the preoperative VAS score, and the ODI index of lower lumbar pain from the preoperative VAS score of 6.50±1.36 and 74.36±6.27 to the postoperative Lumbar pain of 3.20±1.28 and 32.41±8.21, respectively, and the differences were statistically significant (P < .05). 6.27 to 3.20±1.28 and 32.41±8.21 at the final follow-up visit. The differences were statistically significant (P < .05). The results of Pearson correlation analysis showed positive correlation between postoperative LL and FH, SP and AS, VAS (P < .05), and service correlation between SP and SS, LASD (P < .05), and correlation between pre- and post-surgery difference of LL, FH, SP and the improvement rate of ODI and VAS scores (P < .05), with the difference of pre- and post-surgery difference of LL, FH and the ODI, VAS score improvement rate were the strongest correlation. Postoperatively, significant improvements were observed in LL and FH. Pearson correlation analysis indicated a positive correlation between changes in sagittal parameters and clinical outcomes, measured by VAS and ODI scores. Conclusion: The postoperative spine-pelvis sagittal parameters were significantly improved compared with the preoperative ones, and the changes of the spine-pelvis sagittal parameters before and after the operation were correlated with the clinical outcomes, among which the differences of LL and FH had the strongest correlation with the improvement rates of ODI and VAS scores. OLIF effectively improved spinal-pelvic sagittal parameters and clinical outcomes in degenerative lumbar spondylolisthesis, with changes in LL and FH showing the strongest correlation with patient-reported outcome improvements. An oblique lateral interbody fusion can effectively reconstruct spine-pelvis sagittal parameters in patients with degenerative lumbar spondylolisthesis.

Boosting thermoelectric performance of single-walled carbon nanotubes-based films through rational triple treatments.

Single-walled carbon nanotubes (SWCNTs)-based thermoelectric materials, valued for their flexibility, lightweight, and cost-effectiveness, show promise for wearable thermoelectric devices. However, their thermoelectric performance requires significant enhancement for practical applications. To achieve this goal, in this work, we introduce rational "triple treatments" to improve the overall performance of flexible SWCNT-based films, achieving a high power factor of 20.29 µW cm-1 K-2 at room temperature. Ultrasonic dispersion enhances the conductivity, NaBH4 treatment reduces defects and enhances the Seebeck coefficient, and cold pressing significantly densifies the SWCNT films while preserving the high Seebeck coefficient. Also, bending tests confirm structural stability and exceptional flexibility, and a six-legged flexible device demonstrates a maximum power density of 2996 µW cm-2 at a 40 K temperature difference, showing great application potential. This advancement positions SWCNT films as promising flexible thermoelectric materials, providing insights into high-performance carbon-based thermoelectrics.

Silver Copper Chalcogenide Thermoelectrics: Advance, Controversy, and Perspective.

Thermoelectric technology, which enables a direct and pollution-free conversion of heat into electricity, provides a promising path to address the current global energy crisis. Among the broad range of thermoelectric materials, silver copper chalcogenides (AgCuQ, Q = S, Se, Te) have garnered significant attention in thermoelectric community in light of inherently ultralow lattice thermal conductivity, controllable electronic transport properties, excellent thermoelectric performance across various temperature ranges, and a degree of ductility. This review epitomizes the recent progress in AgCuQ-based thermoelectric materials, from the optimization of thermoelectric performance to the rational design of devices, encompassing the fundamental understanding of crystal structures, electronic band structures, mechanical properties, and quasi-liquid behaviors. The correlation between chemical composition, mechanical properties, and thermoelectric performance in this material system is also highlighted. Finally, several key issues and prospects are proposed for further optimizing AgCuQ-based thermoelectric materials.

Primate Model Carrying LMNA Mutation Develops Dilated Cardiomyopathy.

To solve the clinical transformation dilemma of lamin A/C (LMNA)-mutated dilated cardiomyopathy (LMD), we developed an LMNA-mutated primate model based on the similarity between the phenotype of primates and humans. We screened out patients with LMD and compared the clinical data of LMD with TTN-mutated and mutation-free dilated cardiomyopathy to obtain the unique phenotype. After establishment of the LMNA c.357-2A>G primate model, primates were continuously observed for 48 months, and echocardiographic, electrophysiological, histologic, and transcriptional data were recorded. The LMD primate model was found to highly simulate the phenotype of clinical LMD. In addition, the LMD primate model shared a similar natural history with humans.

A mechanical-assisted post-bioprinting strategy for challenging bone defects repair.

Bioprinting that can synchronously deposit cells and biomaterials has lent fresh impetus to the field of tissue regeneration. However, the unavoidable occurrence of cell damage during fabrication process and intrinsically poor mechanical stability of bioprinted cell-laden scaffolds severely restrict their utilization. As such, on basis of heart-inspired hollow hydrogel-based scaffolds (HHSs), a mechanical-assisted post-bioprinting strategy is proposed to load cells into HHSs in a rapid, uniform, precise and friendly manner. HHSs show mechanical responsiveness to load cells within 4 s, a 13-fold increase in cell number, and partitioned loading of two types of cells compared with those under static conditions. As a proof of concept, HHSs with the loading cells show an enhanced regenerative capability in repair of the critical-sized segmental and osteoporotic bone defects in vivo. We expect that this post-bioprinting strategy can provide a universal, efficient, and promising way to promote cell-based regenerative therapy.

Engineering topological interface states in metal-wire waveguides for broadband terahertz signal processing.

Innovative terahertz waveguides are in high demand to serve as a versatile platform for transporting and manipulating terahertz signals for the full deployment of future six-generation (6G) communication systems. Metal-wire waveguides have emerged as promising candidates, offering the crucial advantage of sustaining low-loss and low-dispersion propagation of broadband terahertz pulses. Recent advances have opened up new avenues for implementing signal-processing functionalities within metal-wire waveguides by directly engraving grooves along the wire surfaces. However, the challenge remains to design novel groove structures to unlock unprecedented signal-processing functionalities. In this study, we report a plasmonic signal processor by engineering topological interface states within a terahertz two-wire waveguide. We construct the interface by connecting two multiscale groove structures with distinct topological invariants, i.e., featuring a π-shift difference in the Zak phases. The existence of this topological interface within the waveguide is experimentally validated by investigating the transmission spectrum, revealing a prominent transmission peak in the center of the topological bandgap. Remarkably, we show that this resonance is highly robust against structural disorders, and its quality factor can be flexibly controlled. This unique feature not only facilitates essential functions such as band filtering and isolating but also promises to serve as a linear differential equation solver. Our approach paves the way for the development of new-generation all-optical analog signal processors tailored for future terahertz networks, featuring remarkable structural simplicity, ultrafast processing speeds, as well as highly reliable performance.