A carboxylate linker strategy mediated densely accessible Fe-N4 sites for enhancing oxygen electroreduction in Zn-air batteries.

Iron-nitrogen-carbon single-atom catalysts derived from zeolitic-imidazolate-framework-8 (ZIF-8) have presented its great potential for the oxygen reduction reaction (ORR) in Zn-air batteries (ZABs). However, due to insufficient active Fe-N sites, its ORR activity is inferior to Pt-based catalysts. Herein, a carboxylate (OAc) linker strategy is proposed to design a ZIF-8-derived FeNCOAc catalyst with abundant accessible Fe-N4 single-atom sites. Except that imidazole groups can coordinate with Fe ions, the OAc linker on the unsaturated coordination Zn nodes can anchor and coordinate with more Fe ions, resulting in a significant increase in Fe-N4 site density. Meanwhile, the corrosion of carbon skeleton by OAc oxidation during heat-treatment leads to improved porosity of catalyst. Benefitting from the highly dense Fe-N4 sites and hierarchical pores, the FeNCOAc endows superior performance in alkaline medium (E1/2 = 0.906 V), which is confirmed by density functional theory calculation results. Meanwhile, the assembled liquid ZAB delivers a favorable peak power density of 173.9 mW cm-2, and a high specific capacity of 770.9 mAh g-1 as well as outstanding durability. Besides, the solid-state ZAB also shows outstanding discharge performance.

An electrochemiluminescence sensor based on Ag NPs amplifying PDDA-modified TbPO4:Ce NWs signal for sensitive detection of lincomycin.

The residue of lincomycin in water will not only aggravate the drug resistance of bacteria but also cause damage to the human body through biological accumulation. In this work, an electrochemiluminescence (ECL) aptasensor for the detection of lincomycin was constructed based on polydimethyldiallylammonium chloride (PDDA) functionalized Ce-doped TbPO4 nanowires (PDDA-TbPO4:Ce NWs) and silver nanoparticles (Ag NPs). TbPO4:Ce NWs were used as the luminophore, and PDDA was used to functionalize the luminophore to make the surface of the luminophore positively charged. The negatively charged silver nanoparticles were combined with PDDA-TbPO4:Ce NWs by electrostatic interaction. Ag NPs accelerated the electron transfer rate and promoted the ECL efficiency, which finally increased the ECL intensity of TbPO4:Ce NWs by about 4 times. Under the optimal conditions, the detection limit of the ECL sensor was as low as 4.37 × 10-16 M, and the linear range was 1 × 10 - 15 M to 1 × 10 - 5 M, with good selectivity, stability, and repeatability. The sensor can be applied to the detection of lincomycin in water, and the recovery rate is 97.7-103.4 %, which has broad application prospects.

A dual-mode biosensor based on silica inverse opal photonic crystals modulated electrochemiluminescence and dye displacement colorimetry for the sensitive detection of synthetic cathinone in water environment.

To address the challenges posed by signal capacity limitations and the reliance of sensing methods on single analytical information, this study developed an electrochemiluminescence (ECL) and colorimetric dual-mode sensing platform for the precise detection of 4-chloroethcathinone (4-CEC) in water environments. Firstly, the accurate alignment of the reflection wavelength of appropriately sized silica inverse opal photonic crystals (SIOPCs) with the ECL emission wavelength of luminescent metal-organic frameworks (PCN-224) has been achieved via diameter modulation. This innovative design, which cleverly utilized the band-edge effect, improved the luminous intensity of the ECL sensor, leading to a significant boost in analytical performance. Secondly, the establishment of a colorimetric detection method for confirming the presence of 4-CEC in samples through visual observation of color changes was achieved by employing an aptamer-based dye displacement reaction, utilizing differential binding affinities between the aptamer and both the sulforhodamine B (SRB) and 4-CEC. Under the optimal experimental conditions, the dual-mode sensor demonstrated ECL detection of limits (LOD) of 2.6 × 10-13 g/L and colorimetric LOD of 6.5 ng/L for 4-CEC. These findings highlighted the tremendous potential of developing streamlined and efficient dual-signal readout platforms using ECL aptamer sensors for the precise determination of other Synthetic cathinones (SCs) in water environments.

A zinc-air battery assisted self-powered electrochemical sensor for sensitive detection of microcystin-RR.

Building a high-performance sensing platform is the key to developing sensitive sensors. Herein, a highly sensitive self-powered electrochemical sensor (SPES) was constructed using a WO3·H2O film as the cathode prepared by a hydrothermal method and Zn as the anode, and it could be applied to sensitive detection of microcystin (MC-RR). The WO3·H2O film with a larger specific surface area could boost the oxygen reduction reaction (ORR), which could achieve signal amplification and significantly increase the sensitivity of the sensors. Under the optimal conditions, there was a good linear relationship between the increased electrical power density and the logarithm of MC-RR concentration with a detection limit of 1.31 × 10-15 M (S/N = 3). This method had good anti-interference ability and stability when applied to the determination of MC-RR content in actual samples, which could boost the potential application of electrochemical sensors in the field of environmental monitoring.

Morphological control and performance engineering of Co-based materials for supercapacitors.

As one of the most promising energy storage devices, supercapacitors exhibit a higher power density than batteries. However, its low energy density usually requires high-performance electrode materials. Although the RuO2 material shows desirable properties, its high cost and toxicity significantly limit its application in supercapacitors. Recent developments demonstrated that Co-based materials have emerged as a promising alternative to RuO2 for supercapacitors due to their low cost, favorable redox reversibility and environmental friendliness. In this paper, the morphological control and performance engineering of Co-based materials are systematically reviewed. Firstly, the principle of supercapacitors is briefly introduced, and the characteristics and advantages of pseudocapacitors are emphasized. The special forms of cobalt-based materials are introduced, including 1D, 2D and 3D nanomaterials. After that, the ways to enhance the properties of cobalt-based materials are discussed, including adding conductive materials, constructing heterostructures and doping heteroatoms. Particularly, the influence of morphological control and modification methods on the electrochemical performances of materials is highlighted. Finally, the application prospect and development direction of Co-based materials are proposed.

A bioengineered anti-VEGF protein with high affinity and high concentration for intravitreal treatment of wet age-related macular degeneration.

Intravitreal (IVT) injection of anti-vascular endothelial growth factor (anti-VEGF) has greatly improved the treatment of many retinal disorders, including wet age-related macular degeneration (wAMD), which is the third leading cause of blindness. However, frequent injections can be difficult for patients and may lead to various risks such as elevated intraocular pressure, infection, and retinal detachment. To address this issue, researchers have found that IVT injection of anti-VEGF proteins at their maximally viable concentration and dose can be an effective strategy. However, the intrinsic protein structure can limit the maximum concentration due to stability and solution viscosity. To overcome this challenge, we developed a novel anti-VEGF protein called nanoFc by fusing anti-VEGF nanobodies with a crystallizable fragment (Fc). NanoFc has demonstrated high binding affinity to VEGF165 through multivalency and potent bioactivity in various bioassays. Furthermore, nanoFc maintains satisfactory chemical and physical stability at 4°C over 1 month and is easily injectable at concentrations up to 200 mg/mL due to its unique architecture that yields a smaller shape factor. The design of nanoFc offers a bioengineering strategy to ensure both strong anti-VEGF binding affinity and high protein concentration, with the goal of reducing the frequency of IV injections.

Supersensitive detection of lincomycin with an ECL aptasensor based on the synergistic integration of gold-functionalized upconversion nanoparticles and thiolated 3,4,9,10-perylene tetracarboxylic acid.

In this work, the supersensitive and selective determination of lincomycin (Lin) was achieved using a novel electroluminescent (ECL) aptasensor based on the synergistic integration of gold functionalized upconversion nanoparticles (UCNPs) and thiolated 3,4,9,10-perylene tetracarboxylic acid (PTCA). The integration of two luminophores of UCNPs and PTCA combined the merits of the cathodoluminescence stability of UCNPs and the high quantum yield of PTCA, which significantly promoted the ECL signal and analytical performance of the proposed sensor. The introduction of gold nanoparticles in UCNPs can not only improve the conductivity and ECL performance of UCNPs but also cause them to easily integrate with thiolated PTCA (t-PTCA) via an Au-S bond. The ECL signal of UCNPs@Au/t-PTCA/GCE was almost twice as strong as that of t-PTCA/GCE and tenfold higher than that of UCNPs@Au/GCE. Because of the non-conductive protein of the Lin aptamer, the ECL intensity of apt/UCNPs@Au/t-PTCA/GCE noticeably decreased. In the presence of Lin, the aptamer was pulled down from the sensing interface, resulting in the recovery of the ECL intensity of the sensor. Under optimal conditions, our proposed sensor can quantify the concentration of Lin in the range from 1.0 × 10-15 to 1.0 × 10-7 M with a low detection limit of 2.4 × 10-16 M (S/N = 3), exhibiting high sensitivity and specificity for the determination of Lin.

Three-dimensional flower-like Ni-S/Co-MOF grown on Ni foam as a bifunctional electrocatalyst for efficient overall water splitting.

Poor conductivity of the metal-organic frameworks (MOFs) limits their applications in overall water splitting. Surface sulfur (S) doping transition metal hydroxides would effectively improve the conductivity and adjust the electronic structure to generate additional electroactive sites. Herein, we fabricated a Ni-S/Co-MOF/NF catalyst by electroplating a Ni-S film on the 3D flower-like Co-MOF. Because the 3D flower-like structures are covered in Ni foam, the high exposure of active sites and good conductivity are obtained. Moreover, the synergistic effect between Ni-S and Co-MOF contributes to the redistribution of electrons in the catalyst, which can then optimize the catalytic performance of the material. The obtained 3D flower-like Ni-S/Co-MOF/NF demonstrates excellent activity toward both the oxygen evolution reaction (OER) and the hydrogen evolution reaction (HER) in 1 M KOH, which only requires a low overpotential of 248 mV@10 mA cm-2 for the OER and 127 mV@10 mA cm-2 for the HER, respectively. At a current density of 10 mA cm-2, the Ni-S/Co-MOF/NF‖Ni-S/Co-MOF/NF requires a low cell voltage of 1.59 V to split overall water splitting.

Quantifying Protein Shape to Elucidate Its Influence on Solution Viscosity in High-Concentration Electrolyte Solutions.

Therapeutic proteins with a high concentration and low viscosity are highly desirable for subcutaneous and certain local injections. The shape of a protein is known to influence solution viscosity; however, the precise quantification of protein shape and its relative impact compared to other factors like charge-charge interactions remains unclear. In this study, we utilized seven model proteins of varying shapes and experimentally determined their shape factors (v) based on Einstein's viscosity theory, which correlate strongly with the ratios of the proteins' surface area to the 2/3 power of their respective volumes, based on protein crystal structures resolved experimentally or predicted by AlphaFold. This finding confirms the feasibility of computationally estimating protein shape factors from amino acid sequences alone. Furthermore, our results demonstrated that, in high-concentration electrolyte solutions, a more spherical protein shape increases the protein's critical concentration (C*), the transition concentration beyond which protein viscosity increases exponentially relative to concentration increases. In summary, our work elucidates protein shape as a key determinant of solution viscosity through quantitative analysis and comparison with other contributing factors. This provides insights into molecular engineering strategies to optimize the molecular design of therapeutic proteins, thus optimizing their viscosity.

A high-throughput molecular dynamics screening (HTMDS) approach to the design of novel cyclopeptide inhibitors of ATAD2B based on the non-canonical combinatorial library.

Cyclic peptides (CPs) are a promising class of drugs because of their high biological activity and specificity. However, the design of CP remains challenging due to their conformational flexibility and difficulties in designing stable binding conformation. Herein, we present a high-throughput MD screening (HTMDS) process for the iterative design of stable CP binders with a combinatorial CP library composed of canonical and non-canonical amino acids. As a proof of concept, we apply our methods to design CP inhibitors for the bromodomain (BrD) of ATAD2B. 698,800 CP candidates with a total of 25,570 ns MD simulations were performed to study the protein-ligand binding interactions. The binding free energies (ΔGbind) estimated by MM/PBSA approach for eight lead CP designs were found to be low. CP-1st.43 was the best CP candidate with an estimated ΔGbind of -28.48 kcal/mol when compared to the standard inhibitor C-38 which has been experimentally validated and shown to exhibit ΔGbind of -17.11 kcal/mol. The major contribution of binding sites for BrD of ATAD2B involved the hydrogen-bonding anchor within the Aly-binding pocket, salt bridging, and hydrogen-bonding mediated stabilization of the ZA loop and BC loop, and the complementary Van der Waals attraction. Our methods demonstrate encouraging results by yielding conformationally stable and high-potential CP binders that should have potential applicability in future CP drug development.Communicated by Ramaswamy H. Sarma.

A high-throughput MD screening (HTMDS) process for cyclic peptides (CPs) binders designed with canonical and non-canonical amino acids.698,800 CP candidates with a total of 25,570 ns MD simulations were performed to study the protein-ligand binding interactions and CP design.Some potent CP candidates were obtained with high binding free energies (ΔGbind) estimated by the MM/PBSA approach compared with the standard inhibitor C-38 against the bromodomain (BrD) of ATAD2B.

Translational Challenges and Prospective Solutions in the Implementation of Biomimetic Delivery Systems.

Biomimetic delivery systems (BDSs), inspired by the intricate designs of biological systems, have emerged as a groundbreaking paradigm in nanomedicine, offering unparalleled advantages in therapeutic delivery. These systems, encompassing platforms such as liposomes, protein-based nanoparticles, extracellular vesicles, and polysaccharides, are lauded for their targeted delivery, minimized side effects, and enhanced therapeutic outcomes. However, the translation of BDSs from research settings to clinical applications is fraught with challenges, including reproducibility concerns, physiological stability, and rigorous efficacy and safety evaluations. Furthermore, the innovative nature of BDSs demands the reevaluation and evolution of existing regulatory and ethical frameworks. This review provides an overview of BDSs and delves into the multifaceted translational challenges and present emerging solutions, underscored by real-world case studies. Emphasizing the potential of BDSs to redefine healthcare, we advocate for sustained interdisciplinary collaboration and research. As our understanding of biological systems deepens, the future of BDSs in clinical translation appears promising, with a focus on personalized medicine and refined patient-specific delivery systems.

Synergistic Multieffect Catalytic Amplified Cathodic Electrochemiluminescence Biosensor via Target Binding-Induced Aptamer Conformational Changes for the Ultrasensitive Detection of Synthetic Cathinone.

Signal amplification is a powerful approach to increasing the detection sensitivity of electrochemiluminescence (ECL). Here, we developed synergistic multieffect catalytic strategies based on CuCo2O4 nanorod combination of Ag NPs as coreaction accelerators to fabricate an efficient covalent organic framework (PTCA-COF)-based ternary ECL biosensor. Concretely, the high redox reversibility of Co3+/Co2+ and Cu2+/Cu+ would constantly promote the decomposition of S2O82- for ECL emission. Meanwhile, the introduction of Ag NPs with excellent electrocatalytic activity further realized multiple amplification of the ECL signal. Furthermore, the good hydrogen evolution reaction (HER) ability of Ag@CuCo2O4 nanorods could accelerate the proton transmission rate of the system to amplify ECL behavior. In the presence of the target synthetic cathinone 4-chloroethcathinone (4-CEC) as the quenching ECL signal-response probe, the Ferrocene (Fc)-labeled aptamer folded into the conformationally limited stem-loop structure, bringing Fc near the ECL luminophore and resulting in quenched ECL emission. The quenching effect was connected with target-induced aptamer conformational changes and consequently reflected the target concentration. Under optimum conditions, the proposed biosensor realized a highly sensitive assay for 4-CEC with a large dynamic range from 1.0 × 10-12 to 1.0 × 10-6 g/L and a detection limit as low as 2.5 × 10-13 g/L. This study integrated multiple amplification strategies for efficient ECL enhancement, which provided a novel approach to constructing highly bioactive and sensitive sensors.

A molecularly imprinted polypyrrole electrochemiluminescence sensor based on a novel zinc-based metal-organic framework and chitosan for determination of enrofloxacin.

Nowadays, bacterial resistance caused by the abuse of antibiotics has become a worldwide problem. In this work, a quinolone antibiotic, enrofloxacin (ENR), was rapidly monitored by combining a selective molecular imprinting polymer (MIP) with the electrochemiluminescence (ECL) method. Zn-PTC, a novel zinc-based metal-organic framework (MOF) that has a large specific surface area and ultra-high luminous efficiency, was used as the ECL luminophore. Chitosan (CHIT) was used to contact the specific surface area of molecularly imprinted polymer films and further improved the detection sensitivity. Subsequently, the molecularly imprinted polypyrrole was electropolymerized on the surface of the Zn-PTC and CHIT modified glassy carbon electrode (GCE). The specific sites that could target recombining ENR were shaped on the surface of MIP after extracting the ENR templates. The specific concentrations of ENR could be detected according to the difference in ECL intensity (ΔECL) between the eluting and rebinding of ENR. After optimization, a good linear response of ΔECL and a logarithm of specific ENR concentrations could be obtained in the range of 1.0 × 10-12-1.0 × 10-4 mol L-1, with a detection limit of 9.3 × 10-13 mol L-1 (S/N = 3). Notably, this study provided a rapid, convenient, and cheap method for the detection of ENR in actual samples.

Clinical characteristics and prognostic risk factors of candidemia in non-neutropenic patients: a retrospective cohort study.

This study aimed to determine the clinical characteristics and the prognostic risk factors in non-neutropenic patients with candidemia. Data were retrospectively collected through the medical record information system. Non-neutropenic patients with candidemia were relatively aged, with a more than one-third rate of in-hospitalization mortality. In multivariate analysis, APACHE II score (adjusted odds ratio [aOR], 1.138; 95% confidence interval [CI], 1.067-1.213), septic shock (aOR, 5.704; 95% CI, 2.639-12.326) and RRT (aOR, 16.152; 95% CI, 2.628-99.275) (all P < 0.01) were independent related with non-survivors. In conclusion, non-neutropenic patients with candidemia have a high in-hospitalization mortality, and APACHE II, septic shock, and RRT are independently factors.

Synergistic Interfacial Engineering of Heterostructured Cobalt Phosphide Spheres/Cobalt Hydroxide Nanosheets for Overall Water Splitting.

Recently, transition metal phosphides (TMPs) have been widely explored for the hydrogen evolution reaction (HER) due to their advantaged activity. Nevertheless, the OER performance of TMPs in an alkaline medium is still unsatisfactory. Therefore, interfacial engineering of TMPs to enhance the OER performance is highly desirable. Herein, a Co(OH)2 nanosheet coupled with a CoP sphere supported on nickel foam (NF) is developed by a simple two-step electrodeposition. The large surface area derived from stacked nanosheets and the electronic regulation induced by heterostructure can significantly enhance charge/mass transfer and expose more active sites, thus accelerating the kinetics of the reaction. In addition, the strong electronic interaction between CoP and Co(OH)2 is conducive to the generation of a high valence cobalt center; thus, the electrocatalytic performances toward HER and OER are remarkably improved. Impressively, the optimized CoP/Co(OH)2@NF heterostructure obtains an excellent HER and OER performance with low overpotentials of 76 and 266 mV at 10 mA cm-2, respectively, superior to the commercial Pt/C and RuO2. Moreover, the optimized CoP/Co(OH)2@NF can afford the lowest cell voltage of 1.58 V to achieve 10 mA cm-2 for alkaline overall water splitting and shows outstanding long-term stability.

Ultrasensitive electrochemiluminescence sensor for the detection of synthetic cannabinoids based on perovskite as coreaction accelerator and light-scattering effects of photonic crystals.

As is common knowledge, a strong electrochemiluminescence (ECL) signal is required to ensure the high sensitivity of trace target detection. Here, a dual signal amplification strategy by integrating of perovskite and photonic crystal was fabricated for quantitative synthetic cannabinoids (AB-PINACA) detection based on Zr-connected PTCA and TCPP (PTCA-TCPP) with excellent ECL performance as luminophores. On the one hand, the co-reaction accelerator perovskite (LaCoO3) improved the effective electroactive area of the electrode and promoted the decomposition of K2S2O8, resulting in a stronger ECL signal value. On the other hand, polystyrene inverse opal (PIOPCs) formed after the swelling of PS microspheres not only taken advantage of the light scattering effect and excellent catalytic property of photonic crystals to amplify the ECL signal, but also could be used as a binder to fix LaCoO3 and PTCA-TCPP on the electrode surface to generate unprecedented ECL response and stable ECL signals. Subsequently, the detection substance AB-PINACA was loaded on the electrode surface via the amide bond with the luminophores PTCA-TCPP, thus quenching the ECL signal, so as to realize the sensitive detection of synthetic cannabinoids. Under the optimal conditions, the proposed sensor achieved highly sensitive AB-PINACA detection with a dynamic range from 1.0 × 10-12 to 1.0 × 10-3 g/L and the detection limit was 1.1 × 10-13 g/L, which had great application potential in the detection of synthetic cannabinoids.

A metal-organic framework regulated graphdiyne-based electrochemiluminescence sensor with a electrocatalytic self-acceleration effect for the detection of di-(2-ethylhexyl) phthalate.

In this work, a super-sensitive electrochemiluminescence (ECL) aptamer sensor was constructed using a multiple signal amplification strategy to realize ultra-sensitive detection of di-(2-ethylhexyl) phthalate (DEHP). The incorporation of a highly efficient electrocatalytic metal-organic framework (NH2-Zr-MOF) and graphdiyne (GDY) composite has significantly enhanced the overall electrochemically active surface area, facilitating electron transfer during the entire electrochemical reaction process, and the large number of pores in graphdiyne and NH2-Zr-MOF limited a series of redox reactions within a certain range. This resulted in the generation of a greater number of SO4˙- radicals, thereby boosting the ECL intensity of the GDY in the K2S2O8 system. To increase the performance of the sensor even further, sodium ascorbate (NaAsc) as an accelerator was added to the co-reactant system. Additionally, nitrogen micro-nano bubbles with higher stability and stronger mass transfer have been introduced into the ECL system for the first time. Based on these, the aptamer as the recognition element realized the ultra-sensitive detection of DEHP in the linear range of 1.0 × 10-12 to 1.0 × 10-4 mg mL-1 with the limit of detection (LOD) of 2.43 × 10-13 mg mL-1. In summary, we have utilized the electrocatalytic activity of the porous MOF and the reducing capability of sodium ascorbate to enhance the ECL emission of GDY, which has been successfully applied to the detection of DEHP in water samples.

Evaluation of Bacterial Activity Based on the Electrochemical Properties of Tetrazolium Salts.

This study focused on the electrochemical properties of tetrazolium salts to develop a simple method for evaluating viable bacterial counts, which are indicators of hygiene control at food and pharmaceutical manufacturing sites. Given that the oxidized form of 3-(4,5-di-methylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT), which has excellent cell membrane permeability, changes to the insoluble reduced form of formazan inside the cell, the number of viable cells was estimated by focusing on the reduction current of MTT remaining in the suspension. Dissolved oxygen is an important substance for bacterial activity; however, it interferes with the electrochemical response of MTT. We investigated the electrochemical properties of MTT to obtain a potential-selective current response that was not affected by dissolved oxygen. Real-time observation of viable bacteria in suspension revealed that uptake of MTT into bacteria was completed within 10 min, including the lag period. In addition, we observed that the current response depends on viable cell density regardless of the bacterial species present. Our method enables a rapid estimation of the number of viable bacteria, making it possible to confirm the safety of food products before they are shipped from the factory and thereby prevent food poisoning.

Novel inner filter effect-based near-infrared electrochemiluminescence sensor mediated by well-matched AgBr-nitrogen-doped Ti3C2 MXene and nonmetallic plasmon WO3•H2O.

The development of innovative and efficient strategy is of paramount importance for near-infrared (NIR) electrochemiluminescence (ECL) sensing, which can substantially promote ECL detection in a wide range of situations. Herein, the inner filter effect (IFE) strategy was designed to construct an ultrasensitive NIR ECL biosensor based on the well-matched AgBr nanocrystals (NCs) decorated nitrogen-doped Ti3C2 MXene nanocomposites (AgBr-N-Ti3C2) and hydrated defective tungsten oxide nanosheets (dWO3•H2O). Specifically, the AgBr-N-Ti3C2 nanocomposites displayed extremely effective NIR ECL emission because N-doping could accelerate electron transfer and boost the red-shift of the ECL spectrum. The nonmetallic plasmon dWO3•H2O was used as an absorber due to its facile tuning of the spectra overlap and higher molar extinction coefficients. Time-resolved emission decay curves proved that the decreased ECL intensity was ascribed to the IFE-based steady quenching mechanism. With the support of tetracycline (TC) aptamer and the complementary DNA chain, the fabricated NIR ECL-IFE biosensor performed a wide linear range of 100 nM âˆ¼ 10 fM with a low detection limit of 2.2 fM (S/N = 3), and it exhibited excellent stability, sensitivity, and reproducibility, so as to be applied to real samples. This strategy opens a new avenue to constructing an efficient NIR ECL-IFE system and shows excellent practical potential in actual sample analysis.

A novel molecularly imprinting polypyrrole electrochemiluminescence sensor based on MIL-101-g-C3N4 for supersensitive determination of ciprofloxacin.

Ciprofloxacin (CIP), a quinolone antibiotic, was rapidly and sensitively detected by integrating the molecularly imprinted polymer (MIP) with an ultra-sensitive electrochemiluminescence (ECL) method. g-C3N4, a typical polymer semiconductor, exhibited outstanding ECL efficiency and excellent ECL stability after combining with an iron-based metal-organic framework (MIL-101). Subsequently, the molecularly imprinted polypyrrole was electropolymerized on the composites of MIL-101-g-C3N4 modified glassy carbon electrode (GCE). The specific sites that could target rebinding the CIP molecules were formed on the surface of MIP after extracting the CIP templates. The determination of specific concentrations of CIP could be realized according to the difference in ECL intensity (△ECL) between the eluting and rebinding of the CIP. Under optimal conditions, a good linear response of △ECL and the logarithm of CIP concentrations was obtained in the range 1.0 × 10-9 ~ 1.0 × 10-5 mol/L, with a detection limit of 4.5 × 10-10 mol/L (S/N = 3) (the working potential was -1.8 ~ 0 V). The RSD of all points in the calibration plot was less than 5.0% and the real samples recovery was between 98.0 and 104%. This paper displays satisfactory selectivity and sensitivity, providing a rapid, convenient, and cheap method for the determination of CIP in real samples.