Control of positive and negative photo- and thermal-responses in a single PbI2@CH3NH3PbI3 micro/nanowire-based device for real-time sensing, nonvolatile memory, and logic operation.

CH3NH3PbI3 has shown great potential for photodetectors and photovoltaic devices due to its excellent positive response to visible light. However, its real-time response characteristics hinder its application in optical memory and logic operation; moreover, the presence of excessive PbI2 is a double-edged sword. Herein, we constructed a dual-terminal device using a single CH3NH3PbI3 micro/nanowire with two Ag electrodes, and then in situ introduced PbI2 quantum dots (QDs) as hole trap centres by thermal decomposition at 160 °C. An anomalous negative photoconductivity (NPC) effect for sub-bandgap light below the PbI2 bandgap is obtained. Importantly, an electrically erasable nonvolatile photomemory can be realized. Furthermore, the device also exhibits an abnormal positive thermal resistance (PTR)-related thermomemory effect, and the thermal-induced high-resistance state (HRS) can be erased by a large bias or an illumination of 365 nm super-bandgap UV light. Additionally, logical "OR" gate operations are achieved through a combination of 650 nm sub-bandgap light and a 70 °C temperature-induced HRS, as well as a large bias and 365 nm super-bandgap light-triggered low-resistance state. These effects are attributed to the excitation and injection of holes in QDs and structural defect traps. This multifunctional device, integrating real-time sensing, nonvolatile memory, and logical operation, holds significant potential for novel electronic and optoelectronic applications.

Three-Dimensional Multihierarchical Hexagonal/Cubic ZnIn2S4 S-Scheme Heterophase Junction for Superior Photocatalysis.

It is an important strategy to design composite materials with a special microstructure and a tunable electronic structure through structural compatibility. In this work, a novel hexagonal/cubic ZnIn2S4 polymorphic heterophase junction with a three-dimensional multihierarchical structure is successfully constructed by in situ growth of hexagonal ZnIn2S4 nanosheets on the surface of cubic ZnIn2S4 flower-like microspheres prepared by topological chemical synthesis. On the one hand, the multihierarchical architecture provides large specific surface area, abundant active sites, and excellent light trapping capability. On the other hand, the construction of a direct S-scheme heterophase junction enables the formation of a special charge-transfer channel under the force of a built-in electric field, which not only improves the separation efficiency of carriers but also ensures the stronger reaction activity of charges. The prepared ZnIn2S4 heterophase junction composite photocatalyst exhibits greatly boosted photocatalytic efficiency in rhodamine B degradation, hexavalent chromium reduction, and water splitting for hydrogen production, which are 12.3, 6.5, and 3.1 times higher than that of pure hexagonal ZnIn2S4 and 8.1, 5.1, and 2.3 times higher than that of pure cubic ZnIn2S4, respectively, demonstrating its significant potential for applications in energy and environmental fields.

Attaining inhibition of sneak current and versatile logic operations in a singular halide perovskite memristive device by introducing appropriate interface barriers.

Emerging resistive switching devices hold the potential to realize densely packed passive nanocrossbar arrays, suitable for deployment as random access memory devices (ReRAMs) in both embedded and high-capacity storage applications. In this study, we have engineered ReRAMs comprising ITO/(UVO-treated) amorphous ZnO (a-ZnO)/MAPbI3/Ag which effectively mitigate cross-talk currents without additional components. Significantly, we successfully executed a comprehensive set of 12 distinct 2-input sequential logic functions in a single halide perovskite ReRAM unit for the first time. Furthermore, these logic functions are devoid of any dependency on external light sources, entail merely 1 or 2 logic steps, and showcase symmetrical operability. A superior resistive switching behavior was achieved by harmonizing the charge transport within the bulk MAPbI3 and the tunneling barriers at the interfaces. The outcomes indicate progress in mitigating cross-talk and executing multiple logic functions within a single halide perovskite ReRAM unit, offering a new perspective for the advancement of halide perovskite ReRAMs.

Self-Powered Photodetector Based on Ag/CH3NH3PbI3/C Asymmetric Dual-Terminal Device.

CH3NH3PbI3 is capable of exhibiting a superior photoresponse to visible light, but its self-powered devices are typically formed through p-n junctions. In this study, we fabricated a Ag/CH3NH3PbI3/C dual-terminal asymmetric electrode device using a single CH3NH3PbI3 perovskite micro/nanowire, enabling both the photoresponse and self-powered characteristics of CH3NH3PbI3 to visible light. Compared with traditional p-n junction devices, this simple device demonstrates enhanced interface photovoltaic effects by optimizing the combination of the Ag electrode with CH3NH3PbI3, resulting in superior self-powered characteristics. Under low bias voltage, the device achieves a significant on/off ratio of 103, with superior sensitivity and responsivity as well as a maximum rectification ratio of about 12. The photogenerated voltage and current reach approximately 0.8 V and 2 nA, respectively. This simple, compact, and self-powered asymmetric device exhibits great potential for applications in self-powered optoelectronics and wearable devices. This research provides a promising approach for recognizing and utilizing surface state effects in single nanoscale structures.

Controllably modulated asymmetrical photoresponse with a nonvolatile memory effect in a single CH3NH3PbI3 micro/nanowire for photorectifiers and photomemory.

Nanostructured hybrid organic-inorganic perovskites exhibit remarkable photodetection performance due to their abundant surface states and high responsivity to visible light. However, in traditional photodetectors with a symmetrical configuration of two-terminal electrodes, the photoresponse is independent of bias polarity. Moreover, for self-powered photodetectors, an asymmetric structure of the chemical composition, such as p-n and Schottky junctions, and two different electrodes are necessary. Herein, we demonstrate a modulable asymmetrical photoresponse by packing only one electrode end in a single CH3NH3PbI3 micro/nanowire with two symmetrical Ag electrodes. This not only enables the high performance of light- and bias-modulated multifunctional photorectifiers and self-powered photodetectors, but also allows controllable implementation of nonvolatile photomemory with a tunable spectral responsivity and range. At an unpacked electrode interface, trace moisture in the environment promotes a good bonding of Ag+ and I-, substantially decreasing the interface barrier. Conversely, at a packed electrode interface, abundant surface states can be well preserved, leading to a high interface barrier. Notably, under a large voltage and strong light, the redox of Ag/AgI at the unpacked electrode interface and the injection and ejection of holes at the packed electrode interface can be reversibly conducted by inverting the voltage polarity, enabling a controllable nonvolatile modulation. Therefore, by clarifying the actual origin of the photoelectrical response of CH3NH3PbI3 micro/nanowires at electrode interfaces, high-performance multifunctional photorectifiers and self-powered photodetectors based on asymmetrical interface photovoltaic effects with two symmetrical electrodes can be controllably realized. Furthermore, by precise cooperative modulation of two electrode interface states with a large voltage and strong illumination, nonvolatile photomemory with a tunable spectral responsivity and range can be implemented.

Regulable in-situ autoredox for anchoring synergistic Ni/NiO nanoparticles on reduced graphene oxide with boosted alkaline electrocatalytic oxygen evolution.

To develop ideal alternatives to noble metal catalysts, transition metal catalysts supported on graphene have been receiving extensive attention in the field of electrochemical energy. In this work, using graphene oxide (GO) and nickel formate as precursors, Ni/NiO synergistic nanoparticles with regulable composition are anchored on reduced graphene oxide (RGO) to prepare Ni/NiO/RGO composite electrocatalysts through in-situ autoredox. Thanks to the synergistic effect of Ni3+ active sites and Ni electron donors, the as-prepared Ni/NiO/RGO catalysts exhibit efficient electrocatalytic oxygen evolution performance in 1.0 M KOH electrolyte. The optimal sample has an overpotential of only 275 mV at a current density of 10 mA cm-2 and a small Tafel slope of 90 mV dec-1, which are very comparable to those of commercial RuO2 catalyst. Additionally, the catalytic capacity and structure remain stable after 2000 cyclic voltammetry cycles. For the electrolytic cell assembled with the best-performing sample as anode and commercial Pt/C as cathode, the current density can reach 10 mA cm-2 at a low potential of 1.57 V and remains stable after 30 h of continuous work. It would be expected that the as-developed Ni/NiO/RGO catalyst with high activity should have broad application prospects.

Oxygen-Defect-Mediated ZnCr2O4/ZnIn2S4 Z-Scheme Heterojunction as Photocatalyst for Hydrogen Production and Wastewater Remediation.

Photocatalysis has long been considered a promising technology in green energy and environmental remediation. Since the poor performance of single components greatly limits the practical applications, the construction of heterostructures has become one of the most important technical means to improve the photocatalytic activity. In this work, based on the synthesis of oxygen-vacancy-rich ZnCr2O4 nanocrystals, ZnCr2O4/ZnIn2S4 composites are prepared via a low-temperature in situ growth, and the oxygen-vacancy-induced Z-scheme heterojunction is successfully constructed. The unique core-shell structure offers a tight interfacial contact, increases the specific surface area, and promotes the rapid charge transfer. Meanwhile, the oxygen-vacancy defect level not only enables wide-bandgap ZnCr2O4 to be excited by visible light enhancing the light absorption, but also provides necessary conditions for the construction of Z-scheme heterojunctions promoting charge separation and migration and allowing more reactive charges. The reaction rates of visible-light-driven photocatalytic hydrogen production (3.421 mmol g-1 h-1), hexavalent chromium reduction (0.124 min-1), and methyl orange degradation (0.067 min-1) of the composite reach 3.6, 6.5, and 8.4 times those of pure ZnIn2S4, and 15.8, 41.3, and 67.0 times those of pure ZnCr2O4, respectively. This work presents a novel option for constructing high-performance photocatalysts.

Vacancy-Mediated Z-Scheme Heterostructure in SnO2-Decorated Spinel In3-xS4 with Boosted Photocatalytic Activity.

The widespread application of dyes and heavy metals causes increasing environmental pollution. One effective way to mitigate environmental pollution is to use semiconductor photocatalysts for redox purification of pollutants. Heterostructured photocatalysts can reduce the electron-hole recombination rate and improve light utilization. In this work, a novel SnO2/In3-xS4 composite with oxygen vacancy defect-mediated Z-scheme heterostructure is constructed for the first time by a one-pot method, in which SnO2 ultrasmall nanocrystals are decorated on nanopetals of flower-like In3-xS4. Material analyses show that the as-built three-dimensional hierarchical architecture is able to essentially increase the specific surface area and thus the active sites of the products. More importantly, the formation of Z-scheme heterojunction between the oxygen vacancy-induced SnO2 defect level and the In3-xS4 band structure not only promotes the separation of photogenerated charges but also makes them more reactive. Through the optimization of the composition ratio between the two phases, the visible-light-driven photocatalytic reaction rates of rhodamine B degradation and Cr(VI) reduction for the developed SnO2/In3-xS4 composite photocatalyst are 12.8 and 6.3 times of bare In3-xS4 and 32.0 and 76.0 times of bare SnO2, respectively. This work should provide a promising implication for designing new high-performance composite photocatalysts.

FeCoNi Ternary Nano-Alloys Embedded in a Nitrogen-Doped Porous Carbon Matrix with Enhanced Electrocatalysis for Stable Lithium-Sulfur Batteries.

The application of composite materials that combine the advantages of carbonaceous material and metal alloy proves to be a valid method for improving the performance of lithium-sulfur batteries (LSBs). Herein iron-cobalt-nickel (FeCoNi) ternary alloy nanoparticles (FNC) that spread on nitrogen-doped carbon (NC) are obtained by a strategy of low-temperature sol-gel followed by annealing at 800 °C under an argon/hydrogen atmosphere. Benefiting from the synergistic effect of different components of FNC and the conductive network provided by the NC, not only can the "shuttle effect" of lithium polysulfides (LiPS) be suppressed, but also the conversion of LiPS, the diffusion of Li+, and the deposition of Li2S can be accelerated. Taking advantage of those merits, the batteries assembled with an FNC@NC-modified polypropylene (PP) separator (FNC@NC//PP) can deliver a high reversible specific capacity of 1325 mAh g-1 at 0.2 C and maintain 950 mAh g-1 after 200 cycles, and they can also achieve a low capacity fading rate of 0.06% per cycle over 500 cycles at 1 C. More impressively, even under harsh test conditions (the ratio of electrolyte to sulfur (E/S) = 6 µL mg-1 and sulfur loading = 4.7 mg cm-2 and E/S = 10 µL mg-1 and sulfur loading = 5.9 mg cm-2), the area capacity of batteries is still much higher than 4 mAh cm-2.

Actual origin and precise control of asymmetrical hysteresis in an individual CH3NH3PbI3 micro/nanowire for optical memory and logic operation.

Although CH3NH3PbI3 can present an excellent photoresponse to visible light, its application in solar cells and photodetectors is seriously hindered due to hysteresis behaviour. Moreover, for its origin, there exist different opinions. Herein, we demonstrate a route to realize precise control for the electrical transport of a single CH3NH3PbI3 micro/nanowire by constructing a two-terminal device with asymmetric Ag and C electrodes, and its hysteresis can be clearly identified as a synergistic effect of the redox reaction at the interface of the Ag electrode and the injection and ejection of holes in the interfacial traps of the C electrode rather than its bulk effect. The device can show superior bias amplitude and illumination intensity dependence of hysteresis loops with typical bipolar resistive switching features. Thus, an excellent multilevel nonvolatile optical memory can be effectively realized by the modulation of the illumination and bias, and moreover a logic OR gate operation can be successfully implemented with voltage and illumination as input signals as well. This work clearly reveals and provides a new insight of hysteresis origin that can be attributed to a synergistic effect of two asymmetrical electrode interfaces, and therefore precisely controlling its electrical transport to realize an outstanding application potential in multifunctional devices integrated with optical nonvolatile memory and logic OR gate operation.

Sulfur-source-dependent phase-selective preparation of Cu3NiInSnS6 nanocrystals and their optical and magnetic properties.

Multifunctional multinary metal chalcogenides have long been a research hotspot in the field of materials chemistry due to their rich composition, flexible structure, excellent properties and wide range of applications. However, the exploration of complex quinary chalcogenides is still challenging. In this work, for the first time, we have developed the controlled synthesis of quinary Cu3NiInSnS6 nanocrystals, realizing the selective preparation of hexagonal wurtzite and cubic zinc blende metastable phases by simply tuning the sulfur source. The phase structure analysis reveals that both metastable phases possess a disordered structure with a random distribution of metal atoms in the unit cells. The fabricated wurtzite and zinc blende-structure Cu3NiInSnS6 nanocrystals have a direct band gap of 1.82 and 1.94 eV, respectively, and both exhibit superparamagnetic behavior at low temperatures. This work is of great significance for the development of novel multifunctional materials based on metastable multinary metal chalcogenide phases.

Self-supported electrode based on two-dimensional NiPS3 for supercapacitor application.

Two-dimensional (2D) layered materials hold great promise for electrochemical energy storage due to their unique structure. It is always desirable to explore new-type high-performance 2D structured electrode materials in energy field. In this work, layered transition-metal chalcogenophosphite is developed as the electrode material for supercapacitors for the first time. NiPS3 nanosheet arrays are successfully in-situ grown on carbon cloth via a chemical vapor deposition method, and then directly used as the self-supported electrode for supercapacitors. The fabricated carbon cloth supported NiPS3 nanosheet arrays offer obviously superior electrochemical performance to the powdery NiPS3 nanosheets sample. The self-supported NiPS3 electrode exhibits a high specific capacitance of 1148F g-1 at a current density of 1 A g-1, and a good cycling stability with capacitance retention of 81.4% over 5000 cycles at 10 A g-1. Moreover, the assembled asymmetric supercapacitor device delivers a specific capacitance of 61.3F g-1 at a current density of 1 A g-1, and an energy density of 19.2 Wh kg-1 at a power density of 750 W kg-1 with a voltage window of 1.5 V. This work is of great significance for pioneering the application of 2D transition-metal chalcogenophosphites in supercapacitors.

Revealing the synergistic mechanism of multiply nanostructured V2O3 hollow nanospheres integrated with doped N, Ni heteroatoms, in-situ grown carbon nanotubes and coated carbon nanolayers for the enhancement of lithium-sulfur batteries.

Lithium sulfur (Li-S) batteries are regarded as one of the most promising future energy storage candidates on account of high theoretical specific capacity of 1675 mAh g-1 and energy density of 2600 Wh kg-1. However, their practical application is seriously hindered due to the poor conductivity and volume expansion of sulfur, the weak redox kinetics of lithium polysulfide (LPS), and the severe shuttle effect of LPS. Herein, V2O3@N,Ni-C nanostructures, multiply integrated with zero-dimensional (0D) V2O3 nanoparticles, 1D carbon nanotubes, 2D carbon coating layers and graphene, 3D hollow spheres, and doped N and Ni heteroatoms, were synthesized via a solvothermal method followed by chemical vapor deposition. After being used as a modifier for traditional commercial separator of Li-S batteries, the shuttle effect of LPS can be effectively suppressed owing to the abundant active physical and chemical adsorption sites derived from large specific surface area, rich porosity, and tremendous polarity of the V2O3 nanoparticles with multiple secondary nanostructure integration. Meanwhile, the transfer of Li+ ions and electrons can be effectively enhanced by the highly conductive 2D carbon network, and the kinetics of redox reaction (Li2Sn â†” Li2S) can be accelerated by the doped N and Ni heteroatoms, leading to a synergistic promotion on the reutilization of the adsorbed LPS. Additionally, the unique 3D hollow structure can not only enhance the penetration of electrolyte, but also buffer the volume expansion of sulfur to some extent. Therefore, the rate capacity and cycling performance can be significantly enhanced by the multifunction synergism of adsorption, conductivity, catalysis, and volume buffering. An initial discharge capacity of 1590.4 mAh g-1can be achieved at 0.1C, and the discharge capacity of 803.5 mAh g-1can be still exhibited when increasing to 2C. After a long period of 500 cycles, additionally, the discharge specific capacity of 1142.2 mAh g-1 and capacity attenuation of 0.0617% per cycle can be obtained at 1C.

An individual sandwich hybrid nanostructure of cobalt disulfide in-situ grown on N doped carbon layer wrapped on multi-walled carbon nanotubes for high-efficiency lithium sulfur batteries.

Binding and trapping of lithium polysulfide (LPS) are being conceived as the most effective strategies to improve lithium-sulfur (Li-S) battery performance. Therefore, exploiting a simple but cost-effective approach for the absorption and conversion of LPS and the transfer of electrons and Li+ ions is of paramount importance. Herein, sandwich structure MWCNTs@N-doped-C@CoS2 integrated with multiple nanostructures of zero-dimensional (0D) CoS2 nanoparticles, 1D carbon nanotubes (CNTs), and 2D N-doped amorphous carbon layer was obtained, where MWCNTs was firstly uniformly attached with a polydopamine (PDA) of excellent adhesion, followed by hydrothermal method, the Co2+ nanoparticles were in-situ grown on the PDA by the formation of complex compound of Co2+ and N atoms in PDA, and then the CoS2 nanoparticles were in-situ grown on CNTs in a point-surface contact way by a bridging of N-doped amorphous carbon layer derived from the carbonization of attached PDA after the vulcanization at 500 °C under Ar atmosphere. The multifunction synergism of absorption, conductivity, and the kinetics of LPS redox is significantly improved, consequently effectively suppressing the shuttle effect and tremendously increasing the utilization rate of active substance. For the Li-S battery assembled with MWCNTs@N-doped-C@CoS2-modified separator, its rate capacity and cycling performance can be greatly enhanced. It can exhibit a high initial discharge capacity of 1590 mAh g-1 at 0.1 C, a stable long-term cycling performance with a relatively low capacity decay of 0.07% per cycle during 500 cycles at 1 C, and a reversible capacity of 772 mAh g-1 and a capacity decay of 0.04% per cycle during 250 cycles at 2 C. Even at a large current density of 4 C, an initial specific discharge capacity of 634 mAh g-1 can still be delivered. With a high sulfur loading of 5.0 mg cm-2, additionally, an outstanding cycling stability can also be well maintained at 685 mAh g-1 at 0.1 C after 50 cycles. This work provides a novel and simple but effective strategy to develop such sandwich hybrid materials comprised of polar metal sulfides and conductive networks via an effective bridging to help realize durable and stable Li-S battery.

Giant Piezoresistive Effect of CdS@C Hybrid Nanobelts for Volatile Real-Time Sensor and Erasable Nonvolatile Memory to Stress.

Here, CdS@C nanohybrid composites, where CdS quantum dots (QDs) are uniformly embedded in carbon micro-/nanobelt matrixes, are synthesized via a combustion synthesis followed by a postvulcanization. In the nanohybrids, trap centers are effectively created by the introduction of QDs and moreover their barrier height and filling level can be effectively modulated through a coupling of externally loaded strain and bias. Thus, a single CdS@C micro-/nanobelt-based two-terminal device can exhibit an ultrahigh real-time response to compressive and tensile strains with a tremendous gauge factor of above 104, high sensitivity, and fast response and recovery. More importantly, the trapped charges can be mechanically excited by stress, and furthermore, the stress-triggered high-resistance state can be well-maintained at room temperature and a relatively low operation bias. However, it can be back to its initial low resistance state by loading a relatively large bias, showing a superior erasable stress memory function with a window of about 103. By an effective construction of trap centers in hybrid composites, not only can an ultrahigh performance of volatile real-time stress sensor be obtained under the synergism of external stress and electric field but also can an outstanding erasable nonvolatile stress memory be successfully realized.

Scalable Fabrication of Kevlar/Ti3C2Tx MXene Intelligent Wearable Fabrics with Multiple Sensory Capabilities.

Fiber-based wearable electronics are highly desirable for wearable devices that are expected to be lightweight, easily prepared, durable, flexible, washable, and conformable. However, developing fiber-based fabric electronics to simulate human perceptual systems or even transcend the sensory capabilities of natural creatures is still a pivotal challenge. Herein, we present a Kevlar/MXene (KM) intelligent wearable fabric with multiple sensory capabilities using an ingenious strategy of continuous wet-spinning. The KM fibers can be washed, knitted, sewed, and fabricated into smart KM fabric sensory systems. An intelligent KM sensory mask is prepared to monitor human breathing in time to detect respiratory problems with high accuracy and portability. It provides an important reference for judging diseases and achieving remote diagnosis. Additionally, a smart temperature-responsive sensory glove is developed to help people make proper behavioral prejudgments and prevent potential injuries by sensing surrounding hazards beforehand. Moreover, this sensory system allows soft robotics to make a rough identification about the basic properties of unknown liquid molecules. Overall, by the virtue of the ultrafast responsiveness (90 ms), resilience (110 ms), and ultrasensitive capability in pressure responding, this KM sensory system offers a gentle approach for wireless detection in information encryption, transmission, and preservation by touching the sensory system with variable pressing time on the basis of the International Morse code principles, establishing a competitive and promising candidate for next generation wearable flexible fabric electronics.

Bi19S27I3 nanorods: a new candidate for photothermal therapy in the first and second biological near-infrared windows.

Near-infrared (NIR) light-induced photothermal cancer therapy using nanomaterials as photothermal agents has attracted considerable research interest over the past few years. As the key factor in photothermal therapy systems, a variety of photothermal agents have been developed. However, the exploration of novel photothermal therapy nanoplatforms with high NIR absorption remains a significant challenge, especially those working in both NIR-I and NIR-II windows. In this work, Bi19S27I3 nanorods with remarkably high absorption covering the whole visible light to the entire NIR-I and NIR-II regions have been successfully prepared through a facile solvothermal approach. The as-synthesized Bi19S27I3 nanorods have a high photothermal conversion efficiency of 42.7% at 808 nm (NIR-I) and 41.5% at 1064 nm (NIR-II), making them a promising candidate for photothermal therapy. In vitro cell viability assay reveals that the Bi19S27I3 sample has good biocompatibility and exhibits significant cell-killing effect under NIR irradiation. In vivo anti-tumor experiments demonstrate that the tumor growth can be effectively inhibited by fatal hyperthermia ablation mediated by Bi19S27I3 nanorods under the irradiation of an 808 nm or 1064 nm laser. Therefore, this study should be primarily beneficial for the development of new materials for NIR photothermal therapy applications.

Magnetic nanocarriers as a therapeutic drug delivery strategy for promoting pain-related motor functions in a rat model of cartilage transplantation.

Cartilage is an avascular tissue with low cellularity and insufficient self-repair response. In clinical practice, a large articular cartilage defect is usually fixed by cartilage transplantation. Importantly, the fast repair process has been demanded postoperatively in the area between the host cartilage and the transplanted cartilage. In the past few years, magnetic nanoparticles have drawn great attention due to their biocompatible, biodegradable, and nontoxic properties. In addition, the nanoparticles can easily pass through the cell plasma membrane and increase the cellular uptake efficiency. Here, a therapeutic drug delivery strategy was proposed for cartilage repair. The prepared kartogenin (KGN)-conjugated magnetic nanocarriers (KGN@NCs) promoted the viability of chondrocytes in vitro. In a rat model of cartilage transplantation, intra-articularly delivered KGN@NCs generated cartilage with a flat surface and a high level of aggrecan in vivo. Notably, KGN@NCs were also capable of improving the pain-related motor functions. They promoted the motor functional parameters including the print area and intensity to restore to a normal level compared with the single KGN. Therefore, these therapeutic drug nanocarriers provided the potential for cartilage repair.

Recycled Iontronic from Discarded Chewed Gum for Personalized Healthcare Monitoring and Intelligent Information Encryption.

With the explosive development of smart wearable devices, a serious situation that a large amount of energy waste and environmental pollution caused by electronic discarding needs to be solved urgently. Here, as a throwaway waste material, a chewed gum can be reused for the preparation of wearable iontronics simply. A new gum sensor was constructed by regularly stretching a chewed gum in 6 M NaCl aqueous or even a Chinese edible salt solution for increasing the ionic conductivity. This gum sensor can be shaped arbitrarily, and the preparation process is green, pollution-free, with low energy consumption, and repeatable. Herein, this gum sensor can be utilized for real-time human healthcare monitoring effectively (i.e., facial mood changes, finger flexion, long time walking, and continuous ankle movement) and shows a fast response time of 297 ms and a reliable cycling performance in monitoring body motions. Furthermore, the gum sensor (containing edible salt) can act as a signal transmitter for intelligent information encryption and transmission in the light of the international Morse code with excellent repeatability and stability. Hence, this work will greatly possess wide potential application prospects in wearable electronics and information encryption. This gum sensor also provides a ponderable option in the next generation of artificial intelligence devices, which can address the troubles of material selections in sensor preparation.

Wurtzite CuNi2InS4 Nanocrystals: A Quaternary Chalcogenide Magnetic Semiconductor.

For the first time, quaternary chalcogenide CuNi2InS4 nanocrystals with a wurtzite structure have been designed and fabricated as a new magnetic semiconductor. The phase structure analysis suggests that the synthesized wurtzite CuNi2InS4 phase has a disordered structure in which Cu+, Ni2+, and In3+ ions share the same lattice site of the unit cell with a random cation distribution. The prepared CuNi2InS4 nanocrystals have uniform bullet-like morphology, small size distribution, good monodispersity, and high crystallinity. The magnetic properties investigation reveals that the wurtzite CuNi2InS4 nanocrystals can exhibit a weak ferromagnetic moment with the blocking temperature at around 13 K thanks to the disordered wurtzite structure and the high content of magnetic Ni2+ ions. As for the semiconducting properties, the as-obtained wurtzite CuNi2InS4 nanocrystals show a strong and broad visible light absorption and have a direct bandgap of 1.45 eV. Due to their favorable optical properties, the fabricated thin film of CuNi2InS4 nanocrystals exhibits a good photoelectric response to the solar spectrum, which makes the obtained new phase potential candidate for applications in the photovoltaics. This work demonstrates a new metastable I-II2-III-VI4 chalcogenide that can be used to render multiple functionalities and applications.