Hydrogen-bonded cytosine-endowed supramolecular polymeric nanogels: Highly efficient cancer cell targeting and enhanced therapeutic efficacy.

We demonstrate that cytosine moieties within physically cross-linked supramolecular polymers not only manipulate drug delivery and release, but also confer specific targeting of cancer cells to effectively enhance the safety and efficacy of chemotherapy-and thus hold significant potential as a new perspective for development of drug delivery systems. Herein, we successfully developed physically cross-linked supramolecular polymers (PECH-PEG-Cy) comprised of hydrogen-bonding cytosine pendant groups, hydrophilic poly(ethylene glycol) side chains, and a hydrophobic poly(epichlorohydrin) main chain. The polymers spontaneously self-assemble into a reversibly hydrogen-bonded network structure induced by cytosine and directly form spherical nanogels in aqueous solution. Nanogels with a high hydrogen-bond network density (i.e., a higher content of cytosine moieties) exhibit outstanding long-term structural stability in cell culture substrates containing serum, whereas nanogels with a relatively low hydrogen-bond network density cannot preserve their structural integrity. The nanogels also exhibit numerous unique physicochemical characteristics in aqueous solution, such as a desirable spherical size, high biocompatibility with normal and cancer cells, excellent drug encapsulation capacity, and controlled pH-responsive drug release properties. More importantly, in vitro experiments conclusively indicate the drug-loaded PECH-PEG-Cy nanogels can selectively induce cancer cell-specific apoptosis and cell death via cytosine receptor-mediated endocytosis, without significantly harming normal cells. In contrast, control drug-loaded PECH-PEG nanogels, which lack cytosine moieties in their structure, can only induce cell death in cancer cells through non-specific pathways, which significantly inhibits the induction of apoptosis. This work clearly demonstrates that the cytosine moieties in PECH-PEG-Cy nanogels confer selective affinity for the surface of cancer cells, which enhances their targeted cellular uptake, cytotoxicity, and subsequent induction of programmed cell death in cancer cells.

CO2-Responsive Water-Soluble Conjugated Polymers as a Multifunctional Fluorescent Probe for Bioimaging Applications.

We describe important progress in the synthesis and development of gas-responsive water-soluble conjugated polymers (WSCPs) with potential as multifunctional fluorescent materials for biomedical imaging and probes. A water-soluble WSCP (I-PT) composed of a hydrophobic fluorescent polythiophene backbone and a hydrophilic imidazole side chain was successfully prepared through a facile and efficient two-step synthetic route. Owing to the repulsive force between the hydrophilic and hydrophobic segments and the highly sensitive carbon dioxide (CO2)- and nitrogen (N2)-responsive imidazole groups in its structure, I-PT can spontaneously self-assemble into spherical-like nanoparticles in an aqueous environment, and thus exhibits unique light absorption and fluorescence properties as well as rapid responsiveness to CO2 and N2. In addition, its structure, optical absorption/fluorescence behavior, and surface potential can be quickly turned on and off through alternating cycles of CO2 and N2 bubbling and exhibit controllable cyclic switching stability, thereby allowing effective manipulation of its hierarchical structure and chemical-physical characteristics. More importantly, a series of in vitro cell experiments confirmed that, compared to the significant cytotoxicity of pristine and N2-treated I-PT nanoparticles, CO2-treated I-PT nanoparticles exhibit extremely low cytotoxicity in normal and cancer cells and undergo greatly accelerated cellular uptake, resulting in a significant increase in the intensity and stability of their fluorescence signal in the intracellular environment. Overall, this newly discovered CO2/N2-responsive system provides new insights to effectively enhance the biocompatibility, cellular internalization, and intracellular fluorescence characteristics of WSCPs and holds great potential for biomedical imaging/sensing applications.

Hydrogen-Bonding Interactions from Nucleobase-Decorated Supramolecular Polymer: Synthesis, Self-Assembly and Biomedical Applications.

The fabrication of supramolecular materials for biomedical applications such as drug delivery, bioimaging, wound-dressing, adhesion materials, photodynamic/photothermal therapy, infection control (as antibacterial), etc. has grown tremendously, due to their unique properties, especially the formation of hydrogen bonding. Nevertheless, void space in the integration process, lack of feasibility in the construction of supramolecular materials of natural origin in living biological systems, potential toxicity, the need for complex synthesis protocols, and costly production process limits the actual application of nanomaterials for advanced biomedical applications. On the other hand, hydrogen bonding from nucleobases is one of the strategies that shed light on the blurred deployment of nanomaterials in medical applications, given the increasing reports of supramolecular polymers that promote advanced technologies. Herein, we review the extensive body of literature about supramolecular functional biomaterials based on nucleobase hydrogen bonding pertinent to different biomedical applications. It focuses on the fundamental understanding about the synthesis, nucleobase-decorated supramolecular architecture, and novel properties with special emphasis on the recent developments in the assembly of nanostructures via hydrogen-bonding interactions of nucleobase. Moreover, the challenges, plausible solutions, and prospects of the so-called hydrogen bonding interaction from nucleobase for the fabrication of functional biomaterials are outlined.

Photocurable Carbon Nanotube/Polymer Nanocomposite for the 3D Printing of Flexible Capacitive Pressure Sensors.

A photocurable resin/carbon nanotube (CNT) nanocomposite was fabricated from aligned CNTs in an acrylic matrix. The conductivity of the nanocomposite increased rapidly and then stabilized when the CNT content was increased up to and beyond the percolation threshold. Various structures were created using a digital light processing (DLP) 3D printer. Various polymeric dispersants (SMA-amide) were designed and synthesized to improve the CNT dispersion and prevent aggregation. The benzene rings and lone electron pairs on the dispersant interacted with aromatic groups on the CNTs, causing the former to wrap around the latter. This created steric hindrance, thereby stabilizing and dispersing the CNTs in the solvent. CNT/polymer nanocomposites were created by combining the dispersant, CNTs, and a photocurable resin. The CNT content of the nanocomposite and the 3D printing parameters were tuned to optimize the conductivity and printing quality. A touch-based human interface device (HID) that utilizes the intrinsic conductivity of the nanocomposite and reliably detects touch signals was fabricated, enabling the free design of sensors of various styles and shapes using a low-cost 3D printer. The production of sensors without complex circuitry was achieved, enabling novel innovations.

A CO2-Responsive Imidazole-Functionalized Fluorescent Material Mediates Cancer Chemotherapy.

We present a breakthrough in the synthesis and development of functional gas-responsive materials as highly potent anticancer agents suitable for applications in cancer treatment. Herein, we successfully synthesised a stimuli-responsive multifunctional material (I-R6G) consisting of a carbon dioxide (CO2)-sensitive imidazole moiety and spirolactam-containing conjugated rhodamine 6G (R6G) molecule. The resulting I-R6G is highly hydrophobic and non- or weakly fluorescent. Simple CO2 bubbling treatment induces hydrophobic I-R6G to completely dissolve in water and subsequently form self-assembled nanoparticles, which exhibit unique optical absorption and fluorescence behaviours in water and extremely low haemolytic ability against sheep red blood cells. Reversibility testing indicated that I-R6G undergoes reversible CO2/nitrogen (N2)-dependent stimulation in water, as its structural and physical properties can be reversibly and stably switched by alternating cycles of CO2 and N2 bubbling. Importantly, in vitro cellular assays clearly demonstrated that the CO2-protonated imidazole moiety promotes rapid internalisation of CO2-treated I-R6G into cancer cells, which subsequently induces massive levels of necrotic cell death. In contrast, CO2-treated I-R6G was not internalised and did not affect the viability of normal cells. Therefore, this newly created system may provide an innovative and efficient route to remarkably improve the selectivity, safety and efficacy of cancer treatment.

Photoreactive Mercury-Containing Metallosupramolecular Nanoparticles with Tailorable Properties That Promote Enhanced Cellular Uptake for Effective Cancer Chemotherapy.

A new potential route to enhance the efficiency of supramolecular polymers for cancer chemotherapy was successfully demonstrated by employing a photosensitive metallosupramolecular polymer (Hg-BU-PPG) containing an oligomeric poly(propylene glycol) backbone and highly sensitive pH-responsive uracil-mercury-uracil (U-Hg-U) bridges. This route holds great promise as a multifunctional bioactive nano-object for development of more efficient and safer cancer chemotherapy. Owing to the formation of uracil photodimers induced by ultraviolet irradiation, Hg-BU-PPG can form a photo-cross-linked structure and spontaneously forms spherical nanoparticles in aqueous solution. The irradiated nanoparticles possess many unique characteristics, such as unique fluorescence behavior, highly sensitive pH-responsiveness, and intriguing phase transition behavior in aqueous solution as well as high structural stability and antihemolytic activity in biological media. More importantly, a series of cellular studies clearly confirmed that the U-Hg-U photo-cross-links in the irradiated nanoparticles substantially enhance their selective cellular uptake by cancer cells via macropinocytosis and the mercury-loaded nanoparticles subsequently induce higher levels of cytotoxicity in cancer cells (compared to non-irradiated nanoparticles), without harming normal cells. These results are mainly attributed to cancer cell microenvironment-triggered release of mercury ions from disassembled nanoparticles, which rapidly induce massive levels of apoptosis in cancer cells. Overall, the pH-sensitive U-Hg-U photo-cross-links within this newly discovered supramolecular system are an indispensable factor that offers a potential path to remarkably enhance the selective therapeutic effects of functional nanoparticles toward cancer cells.

Fabrication of localized surface plasmon resonance sensors with scalable polyvinyltetrazole/copper cluster hybrid ring-array for Cu(II) detection.

The bottom of a hole-array photoresist template deposited with a hydrophobic atom-transfer radical polymerization (ATRP) initiator was wetted by treatment with oxygen plasma. After the removal of the photoresist template, ring patterns of the ATRP initiator were formed at the interface between the hydrophobic and wetting regions. Polyacrylonitrile (PAN) was grafted from the initiator ring array to covert to polyvinyltetrazole (PVT) rings via a cyano-to-tetrazole reaction, which could adsorb Cu(II) at various concentrations. The Cu(II) ions within the PVT rings were reduced to form a PVT-copper hybrid ring (VCHR), resulting in a blue-shift of the localized surface plasmon resonance (LSPR) peak as the Cu(II) was adsorbed by the PVT rings. The blue-shift and Cu(II) concentration were linearly correlated, with a detection limit of ∼25 pg mL-1 and a linear range of 25-400 pg mL-1 for Cu(II) detection. Although the PVT rings also chelated Pb(II) and Cr(III), these ions did not exhibit obvious LSPR peaks. The VCHR LSPR sensor exhibited excellent selectivity for Cu(II) detection. Combining lithography and plasma technology provides a versatile platform for developing the scalable ring structure of copper for highly sensitive and selective Cu(II) sensing.

Water-soluble graphene quantum dot-based polymer nanoparticles with internal donor/acceptor heterojunctions for efficient and selective detection of cancer cells.

We present a new, insightful donor-acceptor (D-A) energy transfer-based strategy for the preparation and development of water-soluble multifunctional pH-responsive heterojunction nanoparticles. Hydrophilic tertiary amine-grafted polythiophene (WPT) as a donor and blue fluorescent graphene quantum dots (GQD) as an acceptor spontaneously form co-assembled nanoparticles that function as a highly pH-sensitive and efficient biosensor appropriate for the detection of cancer cells. These WPT/GQD nanoparticles exhibit a number of unique physical characteristics-such as broad-range, tunable GQD-loading contents and particle sizes, extremely low cytotoxicity in normal and cancer cells, and highly sensitive pH-responsiveness and rapid acid-triggered fluorescent behavior under aqueous acidic conditions. We show these features are conferred by self-aggregation of the GQD within the nanoparticles and subsequent aggregation-induced fluorescence of GQD after disassembly of the nanoparticles and dissociation of the D-A interactions under acidic conditions. Importantly, in vitro fluorescence imaging experiments clearly demonstrated the WPT/GQD nanoparticles were gradually taken up into normal and cancer cells in vitro. Selective formation of GQD aggregates subsequently occurred in the acidic microenvironment of the cancer cells and the interior of the cancer cells exhibited strong blue fluorescence; these phenomena did not occur in normal cells. In contrast, pristine WPT and GQD did not exhibit cellular microenvironment-triggered fluorescence transitions in cancer or normal cell lines. Therefore, this newly discovered water-soluble heterojunction system may represent a strongly fluorescent highly pH-sensitive bioprobe for rapid detection of cancer cells.

Graphene Nanoplatelet/Multiwalled Carbon Nanotube/Polypyrrole Hybrid Fillers in Polyurethane Nanohybrids with 3D Conductive Networks for EMI Shielding.

This work reports the preparation of graphene nanoplatelet (GNP)/multiwalled carbon nanotube (MWCNT)/polypyrrole (PPy) hybrid fillers via in situ chemical oxidative polymerization with the addition of a cationic surfactant, hexadecyltrimethylammonium bromide. These hybrid fillers were incorporated into polyurethane (PU) to prepare GNP/MWCNT/PPy/PU nanohybrids. The electrical conductivity of the nanohybrids was synergistically enhanced by the high conductivity of the hybrid fillers. Furthermore, the electromagnetic interference (EMI) shielding effectiveness (SE) was greatly increased by interfacial polarization between the GNPs, MWCNTs, PPy, and PU. The optimal formulation for the preparation of GNP/MWCNT/PPy three-dimensional (3D) nanostructures was determined by optimization experiments. Using this formulation, we successfully prepared GNP/PPy nanolayers (two-dimensional) that are extensively covered by MWCNT/PPy nanowires (one-dimensional), which interconnect to form GNP/MWCNT/PPy 3D nanostructures. When incorporated into a PU matrix to form a nanohybrid, these 3D nanostructures form a continuous network of conductive GNP-PPy-CNT-PPy-GNP paths. The EMI SE of the nanohybrid is 35-40 dB at 30-1800 MHz, which is sufficient to shield over 99.9% of electromagnetic waves. Therefore, this EMI shielding material has excellent prospects for commercial use. In summary, a nanohybrid with excellent EMI SE performance was prepared using a facile and scalable method and was shown to have great commercial potential.

LSPR Sensing of Epithelial Cell Adhesion Molecules through Sphere and Cavity Plasmons of a Composite Ring Array of Poly[2-(dimethylamino)ethyl methacrylate]/Gold Nanoparticles.

Self-organization facilitates the formation of specific structures as a result of constituent interactions. In this study, the bottom of a 600 nm hole array photoresist template, which was deposited with a hydrophobic atom transfer radical polymerization (ATRP) initiator, was wetted by treatment with oxygen plasma. After the removal of the photoresist template, ring patterns of the ATRP initiator were formed at the interface between the hydrophobic and wetting regions. Poly[2-(dimethylamino)ethyl methacrylate] (PDMAEMA) was grafted from the ring array of the initiator to immobilize gold nanoparticles (AuNPs) as a uniform ring array on a silicon substrate via repeated swelling/shrinking cycles. The localized surface plasmon resonance (LSPR) peak of the PDMAEMA-AuNP hybrid ring (PAHR) red-shifted after 12 swelling/shrinking cycles. In comparison to gold nanoparticles, scalable gold nanorings can effectively develop a variety of nanostructures to design LSPR-based sensors and optimize the sensing accuracy and stability. To detect epithelial cell adhesion molecules (EpCAM) during the structural change from a ring to a disk, antiEpCAM was anchored onto the PAHR as a biosensor during swelling/shrinking. The coupling of antiEpCAM and EpCAM led to asymptotical convergence from rings to disks as well as blue shifts of the LSPR peaks. Linear correlation between the blue shift and EpCAM concentration showed a limit of detection of ∼27 pg mL-1 and a linear range of 25-200 pg mL-1 for the detection of EpCAM within 30 min. The simple method of combining lithography and plasma technology provides a versatile platform for developing the scalable ring structure of AuNPs for highly sensitive and selective biosensing.

Self-Assembled Supramolecular Micelles Based on Multiple Hydrogen Bonding Motifs for the Encapsulation and Release of Fullerene.

Living creatures involve several defense mechanisms, such as protecting enzymes to protect organs and cells from the invasion of free radicals. Developing antioxidant molecules and delivery systems to working with enzymes is vital. In this study, a supramolecular polymer PNI-U-DPy was used to encapsulate C60, a well-known antioxidant that is hard to dissolve or disperse in the aqueous media. PNI-U-DPy exhibits characteristics similar to PNIPAM but could form micelles even when the environment temperature is lower than its LCST. The U-DPy moieties could utilize their strong complementary hydrogen bonding-interaction to create a physically crosslinked network within PNIPAM micelles, thus adjusting its LCST to a value near the physiological temperature. Morphological studies suggested that C60 could be effectively loaded into PNI-U-DPy micelles with a high loading capacity (29.12%), and the resulting complex PNI-C60 is stable and remains temperature responsive. A series of measurements under variable temperatures was carried out and showed that a controlled release process proceeded. Furthermore, PNI-C60 exhibits hydroxyl radicals scavenging abilities at a low dosage and could even be adjusted by temperature. It can be admitted that the micelle system can be a valuable alternative for radical scavengers and may be delivered to the desired position with good dispersibility and thermo-responsivity. It is beneficial to the search progress of scientists for drug delivery systems for chemotherapeutic treatments and biomedical applications.

Multi-Biofunctional Silver-Containing Metallosupramolecular Nanogels for Efficient Antibacterial Treatment and Selective Anticancer Therapy.

We develop a simple and efficient route for the fabrication of water-soluble metallosupramolecular polymers. We demonstrate that the introduction of environment-responsive metal-organic complexes within supramolecular polymers endows the resulting self-assembled nano-objects with outstanding antibacterial activity and may significantly improve the efficacy and safety of selective cancer therapy. Herein, we successfully developed a silver-containing supramolecular polymer (Ag-Cy-J) possessing a hydrophilic Jeffamine backbone and highly sensitive pH-responsive cytosine-silver-cytosine (Cy-Ag-Cy) linkages, which spontaneously self-assemble to produce sterically stabilized spherical nanogels in water. The resulting nanogels exhibit several attractive features such as unique fluorescence behavior in water, highly stable self-assembled structures in biological media, significant antihemolytic capability, highly sensitive pH-responsiveness and broad-spectrum antibacterial activity against various bacteria strains. Importantly, in vitro cellular assays clearly demonstrated Ag-Cy-J nanogels highly selectively target and induce cytotoxicity in cancer cells, without affecting normal cells. The selective cytotoxic activity in cancer cells is attributed to rapid dissociation of the Cy-Ag-Cy complexes within the nanogels in the cancer cell microenvironment, followed by the intracellular release of silver ions and induction of rapid, massive apoptosis. Overall, the pH-sensitive Cy-Ag-Cy complexes within this supramolecular nanogel system may provide a route to remarkably improve the efficacy of both antibacterial and cancer drug therapies. STATEMENT OF SIGNIFICANCE: We present a significant breakthrough in the development of a water-soluble silver-containing metallosupramolecular polymer (Ag-Cy-J) that spontaneously self-assembles in water into a spherical nanogel with unique physical characteristics due to the existence of highly sensitive pH-responsive cytosine-silver-cytosine (Cy-Ag-Cy) linkages within the nanogels. Importantly, a series of in vitro antibacterial and anticancer assays demonstrated the Ag-Cy-J nanogels not only exert strong antibacterial activity against various bacterial strains, but also exhibit a high degree of selective uptake and rapidly induce massive apoptosis in cancer cells without harming normal cells. Thus, this newly discovered supramolecular system may potentially provide a multi-biofunctional soft nanomaterial for efficient and safe antibacterial and cancer therapies.

Highly Thermally Conductive Epoxy Composites with AlN/BN Hybrid Filler as Underfill Encapsulation Material for Electronic Packaging.

In this study, the effects of a hybrid filler composed of zero-dimensional spherical AlN particles and two-dimensional BN flakes on the thermal conductivity of epoxy resin were studied. The thermal conductivity (TC) of the pristine epoxy matrix (EP) was 0.22 W/(m K), while the composite showed the TC of 10.18 W/(m K) at the 75 wt% AlN-BN hybrid filler loading, which is approximately a 46-fold increase. Moreover, various essential application properties were examined, such as the viscosity, cooling rate, coefficient of thermal expansion (CTE), morphology, and electrical properties. In particular, the AlN-BN/EP composite showed higher thermal stability and lower CTE (22.56 ppm/°C) than pure epoxy. Overall, the demonstrated outstanding thermal performance is appropriate for the production of electronic packaging materials, including next-generation flip-chip underfills.

PAMAM Dendritic Nanoparticle-Incorporated Hydrogel to Enhance the Immunogenic Cell Death and Immune Response of Immunochemotherapy.

The efficiency of chemotherapy is frequently affected by its multidrug resistance, immune suppression, and severe side effects. Its combination with immunotherapy to reverse immune suppression and enhance immunogenic cell death (ICD) has emerged as a new strategy to overcome the aforementioned issues. Herein, we construct a pH-responsive PAMAM dendritic nanocarrier-incorporated hydrogel for the co-delivery of immunochemotherapeutic drugs. The stepwise conjugation of moieties and drug load was confirmed by various techniques. In vitro experimental results demonstrated that PAMAM dendritic nanoparticles loaded with a combination of drugs exhibited spherical nanosized particles, facilitated the sustained release of drugs, enhanced cellular uptake, mitigated cell viability, and induced apoptosis. The incorporation of PAB-DOX/IND nanoparticles into thermosensitive hydrogels also revealed the formation of a gel state at a physiological temperature and further a robust sustained release of drugs at the tumor microenvironment. Local injection of this formulation into HeLa cell-grafted mice significantly suppressed tumor growth, induced immunogenic cell death-associated cytokines, reduced cancer cell proliferation, and triggered a CD8+ T-cell-mediated immune response without obvious systemic toxicity, which indicates a synergistic ICD effect and reverse of immunosuppression. Hence, the localized delivery of immunochemotherapeutic drugs by a PAMAM dendritic nanoparticle-incorporated hydrogel could provide a promising strategy to enhance antitumor activity in cancer therapy.

Conductive Supramolecular Polymer Nanocomposites with Tunable Properties to Manipulate Cell Growth and Functions.

Synthetic bioactive nanocomposites show great promise in biomedicine for use in tissue growth, wound healing and the potential for bioengineered skin substitutes. Hydrogen-bonded supramolecular polymers (3A-PCL) can be combined with graphite crystals to form graphite/3A-PCL composites with tunable physical properties. When used as a bioactive substrate for cell culture, graphite/3A-PCL composites have an extremely low cytotoxic activity on normal cells and a high structural stability in a medium with red blood cells. A series of in vitro studies demonstrated that the resulting composite substrates can efficiently interact with cell surfaces to promote the adhesion, migration, and proliferation of adherent cells, as well as rapid wound healing ability at the damaged cellular surface. Importantly, placing these substrates under an indirect current electric field at only 0.1 V leads to a marked acceleration in cell growth, a significant increase in total cell numbers, and a remarkable alteration in cell morphology. These results reveal a newly created system with great potential to provide an efficient route for the development of multifunctional bioactive substrates with unique electro-responsiveness to manipulate cell growth and functions.

Immobilization of Air-Stable Copper Nanoparticles on Graphene Oxide Flexible Hybrid Films for Smart Clothes.

Through the use of organic/inorganic hybrid dispersants-which are composed of polymeric dispersant and two-dimension nanomaterial graphene oxide (GO)-copper nanoparticles (CuNPs) were found to exhibit nano stability, air-stable characteristics, as well as long-term conductive stability. The polymeric dispersant consists of branched poly(oxyethylene)-segmented esters of trimellitic anhydride adduct (polyethylene glycol-trimethylolpropane-trimellitic anhydride, designated as PTT). PTT acts as a stabilizer for CuNPs, which are synthesized via in situ polymerization and redox reaction of the precursor Cu(CH3COO)2 within an aqueous system, and use graphene oxide to avoid the reduction reaction of CuNPs. The results show that after 30 days of storage the CuNPs/PTT/GO composite film maintains a highly conductive network (9.06 × 10-1 Ω/sq). These results indicate that organic/inorganic PTT/GO hybrid dispersants can effectively maintain the conductivity stability of CuNPs and address the problem of CuNP oxidation. Finally, the new CuNPs/PTT/GO composite film was applied to the electrocardiogram (ECG) smart clothes. This way, a stable and antioxidant-sensing electrode can be produced, which is expected to serve as a long-term ECG monitoring device.

Piezoelectric Property Enhancement of PZT/Poly(vinylidenefluoride-co-trifluoroethylene) Hybrid Films for Flexible Piezoelectric Energy Harvesters.

In this study, lead zirconate titanate (PZT) ceramic particles were added for further improvement. PZT belongs to the perovskite family and exhibits good piezoelectricity. Thus, it was added in this experiment to enhance the piezoelectric response of the poly(vinylidenefluoride-co-trifluoroethylene) (PVDF-TrFE) copolymer, which produced a voltage output of 1.958 V under a cyclic pressure of 290 N. In addition, to further disperse the PZT particles in the PVDF-TrFE matrix, tetradecylphosphonic acid (TDPA) was synthesized and employed to modify the PZT surface, after which the surface-modified PZT (m-PZT) particles were added to the PVDF-TrFE matrix. The TDPA on the PZT surface made it difficult for the particles to aggregate, allowing them to disperse in the polymer solution more stably. In this way, the PZT particles with piezoelectric responses could be uniformly dispersed in the PVDF-TrFE film, thereby further enhancing its overall piezoelectric response. The test results showed that upon the addition of 10 wt % m-PZT, the piezoelectric coefficient of m-PZT/PVDF-TrFE 10 wt % was 27 pC/N; and under a cyclic pressure of 290 N, the output voltage reached 3.426 V, which demonstrated a better piezoelectric response than the polymer film with the original PZT particles. Furthermore, the piezoelectric coefficient of m-PZT/PVDF-TrFE 10 wt % was 27.1 pC/N. This was exhibited by maintaining a piezoelectric coefficient of 26.8 pC/N after 2000 cycles. Overall, a flexible piezoelectric film with a high piezoelectric coefficient was prepared by following a simple fabrication process, which showed that this film possesses great commercial potential.

Complementary Nucleobase Interactions Drive Co-Assembly of Drugs and Nanocarriers for Selective Cancer Chemotherapy.

A new concept in cooperative adenine-uracil (A-U) hydrogen bonding interactions between anticancer drugs and nanocarrier complexes was successfully demonstrated by invoking the co-assembly of water soluble, uracil end-capped polyethylene glycol polymer (BU-PEG) upon association with the hydrophobic drug adenine-modified rhodamine (A-R6G). This concept holds promise as a smart and versatile drug delivery system for the achievement of targeted, more efficient cancer chemotherapy. Due to A-U base pairing between BU-PEG and A-R6G, BU-PEG has high tendency to interact with A-R6G, which leads to the formation of self-assembled A-R6G/BU-PEG nanogels in aqueous solution. The resulting nanogels exhibit a number of unique physical properties, including extremely high A-R6G-loading capacity, well-controlled, pH-triggered A-R6G release behavior, and excellent structural stability in biological media. Importantly, a series of in vitro cellular experiments clearly demonstrated that A-R6G/BU-PEG nanogels improved the selective uptake of A-R6G by cancer cells via endocytosis and promoted the intracellular release of A-R6G to subsequently induce apoptotic cell death, while control rhodamine/BU-PEG nanogels did not exert selective toxicity in cancer or normal cell lines. Overall, these results indicate that cooperative A-U base pairing within nanogels is a critical factor that improves selective drug uptake and effectively promotes apoptotic programmed cell death in cancer cells.

Photoreactive Cytosine-Functionalized Self-Assembled Micelles with Enhanced Cellular Uptake Capability for Efficient Cancer Chemotherapy.

Design, fabrication, and control of photoreactive supramolecular macromers─which are composed of a thermoresponsive polymer backbone and photoreactive nucleobase end-groups─to achieve the desired physical-chemical performance and provide the high efficiency required for chemotherapy drug delivery purposes still present challenges. Herein, a difunctional cytosine-terminated supramolecular macromer was successfully obtained at high yield. UV-irradiation induces the formation of cytosine photodimers within the structure. The irradiated macromer can self-assemble into nanosized spherical micelles in water that possess a number of interesting and unique features, such as desired micellar size and morphology, tunable drug-loading capacity, and excellent structural stability in serum-containing medium, in addition to well-controlled drug-release behaviors in response to changes in environmental temperature and pH; these extremely desirable, rare features are required to augment the functions of polymeric nanocarriers for drug delivery. Importantly, a series of in vitro studies demonstrated that photodimerized cytosine moieties within the drug-loaded micelles substantially enhance their internalization and accumulation inside cells via endocytosis and subsequently lead to induction of massive apoptotic cell death compared with the corresponding nonirradiated micelles. Thus, this newly developed "photomodified" nanocarrier system could provide a potentially fruitful route to enhance the drug delivery performance of nanocages without the need to introduce targeting moieties or additional components.

Polymer-Assisted Dispersion of Boron Nitride/Graphene in a Thermoplastic Polyurethane Hybrid for Cooled Smart Clothes.

The avoidance and mitigation of energy wastage have attracted increasing attention in the context of global warming and climate change. With advances in materials science, diverse multifunctional materials with high thermal conductivity have shown excellent energy-saving potential. In this study, a hybrid film exhibiting high thermal conductivity with excellent stretchability and washability was prepared. First, a simple surface modification of boron nitride (BN) was performed to realize a modified boron nitride (BNOH) filler. Next, an organic dispersant was synthesized to enhance the dispersion of BNOH and graphene nanoplatelets (GNPs) in the proposed composite. Subsequently, a simple procedure was used to combine the dispersed GNPs and BNOH fillers with thermoplastic polyurethane (TPU) to fabricate a hybrid structure. The hybrid films composed of BNOH-GNP/TPU with a dispersant exhibited a high thermal conductivity of 12.62 W m-1 K-1 at a low filler loading of 20 wt.%. This hybrid film afforded excellent stretchability and washability, as indicated by the very small thermal-conductivity reduction to only 12.23 W m-1 K-1 after 100 cycles of fatigue testing and to 12.01 W m-1 K-1 after 10 washing cycles. Furthermore, the cooling and hydrophobicity properties of the hybrid film were enhanced when compared with neat TPU. Overall, our approach demonstrates a simple and novel strategy to break the passive effect of traditional commercial cooling clothing by combining a high-thermal-conductivity film with an active cooling source to amplify the cooling effect and develop wearable cooled smart clothes with great commercial potential.