Self-injection locking efficiency of a UV Fabry-Perot laser diode.

In this Letter, we have studied the performance of a gallium nitride 370 nm Fabry-Perot laser diode self-injection locked via a high quality (Q-) factor magnesium fluoride whispering gallery mode (WGM) resonator and show that the state of locking strongly depends on frequency detuning between the internal laser cavity and the resonator modes. Optimizing the detuning, we were able to observe monochromatic laser emission with a sub-100 kHz linewidth. The Q-factor of the resonator measured in this regime exceeded 109.

Generation of 43 W of quasi-continuous 780 nm laser light via high-efficiency, single-pass frequency doubling in periodically poled lithium niobate crystals.

We demonstrate high-efficiency frequency doubling of the combined output of two 1560 nm 30 W fiber amplifiers via single pass through periodically poled lithium niobate (PPLN) crystals. The temporal profile of the 780 nm output is controlled by adjusting the relative phase between the seeds of the amplifiers. We obtain a peak power of 34 W of 780 nm light by passing the combined output through one PPLN crystal, and a peak power of 43 W by passing through two cascading PPLN crystals. This source provides high optical power, excellent beam quality and spectral purity, and agile frequency and amplitude control in a simple and compact setup, which is ideal for applications such as atom optics using Rb atoms.

A high-performance magnetic shield with large length-to-diameter ratio.

We have demonstrated a 100-fold improvement in the magnetic field uniformity on the axis of a large aspect ratio, cylindrical, mumetal magnetic shield by reducing discontinuities in the material of the shield through the welding and re-annealing of a segmented shield. The three-layer shield reduces Earth's magnetic field along an 8 m region to 420 µG (rms) in the axial direction, and 460 and 730 µG (rms) in the two transverse directions. Each cylindrical shield is a continuous welded tube which has been annealed after manufacture and degaussed in the apparatus. We present both experiments and finite element analysis that show the importance of uniform shield material for large aspect ratio shields, favoring a welded design over a segmented design. In addition, we present finite element results demonstrating the smoothing of spatial variations in the applied magnetic field by cylindrical magnetic shields. Such homogenization is a potentially useful feature for precision atom interferometric measurements.

102ℏk large area atom interferometers.

We demonstrate atom interferometers utilizing a novel beam splitter based on sequential multiphoton Bragg diffractions. With this sequential Bragg large momentum transfer (SB-LMT) beam splitter, we achieve high contrast atom interferometers with momentum splittings of up to 102 photon recoil momenta (102ℏk). To our knowledge, this is the highest momentum splitting achieved in any atom interferometer, advancing the state-of-the-art by an order of magnitude. We also demonstrate strong noise correlation between two simultaneous SB-LMT interferometers, which alleviates the need for ultralow noise lasers and ultrastable inertial environments in some future applications. Our method is intrinsically scalable and can be used to dramatically increase the sensitivity of atom interferometers in a wide range of applications, including inertial sensing, measuring the fine structure constant, and detecting gravitational waves.

Noise-immune conjugate large-area atom interferometers.

We present a pair of simultaneous conjugate Ramsey-Bordé atom interferometers using large (20variant Planck's over 2pik)-momentum transfer beam splitters, where variant Planck's over 2pik is the photon momentum. Simultaneous operation allows for common-mode rejection of vibrational noise. This allows us to surpass the enclosed space-time area of previous interferometers with a splitting of 20variant Planck's over 2pik by a factor of 2500. Using a splitting of 10variant Planck's over 2pik, we demonstrate a 3.4 ppb resolution in the measurement of the fine structure constant. Examples for applications in tests of fundamental laws of physics are given.

Atom interferometers with scalable enclosed area.

Bloch oscillations (i.e., coherent acceleration of matter waves by an optical lattice) and Bragg diffraction are integrated into light-pulse atom interferometers with large momentum splitting between the interferometer arms, and hence enhanced sensitivity. Simultaneous acceleration of both arms in the same internal states suppresses systematic effects, and simultaneously running a pair of interferometers suppresses the effect of vibrations. Ramsey-Bordé interferometers using four such Bloch-Bragg-Bloch beam splitters exhibit 15% contrast at 24variant Planck's over 2pik splitting, the largest so far (variant Planck's over 2pik is the photon momentum); single beam splitters achieve 88variant Planck's over 2pik. The prospects for reaching 100 s of variant Planck's over 2pik and applications such as gravitational wave sensors are discussed.

6W, 1 kHz linewidth, tunable continuous-wave near-infrared laser.

A modified Coherent 899-21 titanium sapphire laser is injection locked to produce 6-6.5 W of single-frequency light at 852 nm. After closed-loop amplitude control and frequency stabilization to a high-finesse cavity, it delivers 4-4.5 W with < 1 kHz linewidth at the output of a single-mode fiber. The laser is tunable from about 700-1000 nm; up to 8 W should be possible at 750-810 nm.

Atom interferometry with up to 24-photon-momentum-transfer beam splitters.

We present up to 24-photon Bragg diffraction as a beam splitter in light-pulse atom interferometers to achieve the largest splitting in momentum space so far. Relative to the 2-photon processes used in the most sensitive present interferometers, these large momentum transfer beam splitters increase the phase shift 12-fold for Mach-Zehnder (MZ) and 144-fold for Ramsey-Bordé (RB) geometries. We achieve a high visibility of the interference fringes (up to 52% for MZ or 36% for RB) and long pulse separation times that are possible only in atomic fountain setups. As the atom's internal state is not changed, important systematic effects can cancel.

Atom-interferometry tests of the isotropy of post-Newtonian gravity.

We present a test of the local Lorentz invariance of post-Newtonian gravity by monitoring Earth's gravity with a Mach-Zehnder atom interferometer that features a resolution of up to 8 x 10{-9}g/sqrt[Hz], the highest reported thus far. Expressed within the standard model extension (SME) or Nordtvedt's anisotropic universe model, the analysis limits four coefficients describing anisotropic gravity at the ppb level and three others, for the first time, at the 10 ppm level. Using the SME we explicitly demonstrate how the experiment actually compares the isotropy of gravity and electromagnetism.

Extended-cavity diode lasers with tracked resonances.

We present a painless, almost-free upgrade to present extended-cavity diode lasers (ECDLs) that improves the long-term mode-hop-free performance by stabilizing the resonance of the internal cavity to the external cavity. This stabilization is based on the observation that the frequency or amplitude noise of the ECDL is lowest at the optimum laser diode temperature or injection current. Thus, keeping the diode current at the level where the noise is lowest ensures mode-hop-free operation within one of the stable regions of the mode chart, even if these should drift due to external influences. This method can be applied directly to existing laser systems without modifying the optical setup. We demonstrate the method in two ECDLs stabilized to vapor cells at 852 and 895 nm wavelengths. We achieve long-term mode-hop-free operation and low noise at low power consumption, even with an inexpensive non-antireflection-coated diode.

Nanosecond electro-optical switching with a repetition rate above 20 MHz.

We describe an electro-optical switch based on a commercial electro-optic modulator (modified for high-speed operation) and a 340 V pulser having a rise time of 2.2 ns (at 250 V). It can produce arbitrary pulse patterns with an average repetition rate beyond 20 MHz. It uses a grounded-grid triode driven by transmitting power transistors. We discuss variations that enable analog operation, use the step-recovery effect in bipolar transistors, or offer other combinations of output voltage, size, and cost.

Phase-locked, low-noise, frequency agile titanium:sapphire lasers for simultaneous atom interferometers.

We demonstrate a laser system consisting of a >1.6 W titanium:sapphire laser that is phase locked to another free-running titanium:sapphire laser at a wavelength of 852 nm with a phase noise of -138 dBc/Hz at 1 MHz from the carrier, using an intracavity electro-optic phase modulator. The residual phase variance is 2.5 x 10(-8) rad2 integrated from 1 Hz to 10 kHz. This system can phase-continuously change the offset frequency within 200 ns with frequency steps up to 4 MHz. Simultaneous atom interferometers can make full use of this ultralow phase noise in differential measurements, where influences from the vibration of optics are greatly suppressed in common mode.

Active sub-Rayleigh alignment of parallel or antiparallel laser beams.

We measure and stabilize the relative angle of parallel and antiparallel laser beams to 5 nrad/(square root of)Hz resolution by comparing the phases of radio frequency beat notes on a quadrant photodetector. The absolute accuracy is 5.1 and 2.1 microrad for antiparallel and parallel beams, respectively, which is more than 6 and 16 times below the Rayleigh criterion.