Precise control over gas-transporting channels in zeolitic imidazolate framework glasses.

Porous metal-organic frameworks have emerged to resolve important challenges of our modern society, such as CO2 sequestration. Zeolitic imidazolate frameworks (ZIFs) can undergo a glass transition to form ZIF glasses; they combine the liquid handling of classical glasses with the tremendous potential for gas separation applications of ZIFs. Using millimetre-sized ZIF-62 single crystals and centimetre-sized ZIF-62 glass, we demonstrate the scalability and processability of our materials. Further, following the evolution of gas penetration into ZIF crystals and ZIF glasses by infrared microimaging techniques, we determine the diffusion coefficients and changes to the pore architecture on the ångström scale. The evolution of the material on melting and processing is observed in situ on different length scales by using a microscope-coupled heating stage and analysed microstructurally by transmission electron microscopy. Pore collapse during glass processing is further tracked by changes in the volume and density of the glasses. Mass spectrometry was utilized to investigate the crystal-to-glass transition and thermal-processing ability. The controllable tuning of the pore diameter in ZIF glass may enable liquid-processable ZIF glass membranes for challenging gas separations.

Hydrocarbon Sorption in Flexible MOFs-Part II: Understanding Adsorption Kinetics.

The rate of sorption of n-butane on the structurally flexible metal-organic framework [Cu2(H-Me-trz-ia)2], including its complete structural transition between a narrow-pore phase and a large-pore phase, was studied by sorption gravimetry, IR spectroscopy, and powder X-ray diffraction at close to ambient temperature (283, 298, and 313 K). The uptake curves reveal complex interactions of adsorption on the outer surface of MOF particles, structural transition, of which the overall rate depends on several factors, including pressure step, temperature, as well as particle size, and the subsequent diffusion into newly opened pores. With the aid of a kinetic model based on the linear driving force (LDF) approach, both rates of diffusion and structural transition were studied independently of each other. It is shown that temperature and applied pressure steps have a strong effect on the rate of structural transition and thus, the overall velocity of gas uptake. For pressure steps close to the upper boundary of the gate-opening, the rate of structural transition is drastically reduced. This feature enables a fine-tuning of the overall velocity of sorption, which can even turn into anti-Arrhenius behavior.

Metal-Organic Framework Co-MOF-74-Based Host-Guest Composites for Resistive Gas Sensing.

Increasing demands in the field of sensing, especially for gas detection applications, require new approaches to chemical sensors. Metal-organic frameworks (MOFs) can play a decisive role owing to their outstanding performances regarding gas selectivity and sensitivity. The tetrathiafulvalene (TTF)-infiltrated MOF, Co-MOF-74, has been prepared following the host-guest concept and evaluated in resistive gas sensing. The Co-MOF-74-TTF crystal morphology has been characterized via X-ray diffraction and scanning electron microscopy, while the successful incorporation of TTF into the MOF has been validated via X-ray photoemission spectroscopy, thermogravimetric analysis, UV/vis, infrared (IR), and Raman investigations. We demonstrate a reduced yet ample uptake of CO2 in the pores of the new material by IR imaging and adsorption isotherms. The nanocomposite Co-MOF-74-TTF exhibits an increased electrical conductivity in comparison to Co-MOF-74 which can be influenced by gas adsorption from a surrounding atmosphere. This effect could be used for gas sensing.

Ethane diffusion in mixed linker zeolitic imidazolate framework-7-8 by pulsed field gradient NMR in combination with single crystal IR microscopy.

Pulsed field gradient (PFG) NMR was used in combination with single crystal IR microscopy (IRM) to study diffusion of ethane inside crystals of a mixed linker zeolitic imidazolate framework (ZIF) of the type ZIF-7-8 under comparable experimental conditions. These crystals contain 2-methylimidazolate (ZIF-8 linker) and benzimidazolate (ZIF-7 linker). It was observed that the PFG NMR attenuation curves measured for ethane in ZIF-7-8 exhibit deviations from the monoexponential behaviour, thereby indicating that the ethane self-diffusivity in different crystals of a crystal bed can be different. Measurements of the ethane uptake curves performed by IRM under the same conditions in different ZIF-7-8 crystals of the bed yield different transport diffusivities thus confirming that the rate of ethane diffusion is different in different ZIF-7-8 crystals. The IRM observation that the fractions of ZIF-8 and ZIF-7 linkers are different in different ZIF-7-8 crystals allowed attributing the observed heterogeneity in diffusivities to the heterogeneity in the linker fraction. The quantitative comparison of the average ethane self-diffusivities measured by PFG NMR in ZIF-7-8 with the corresponding data on corrected diffusivities from IRM measurements revealed a good agreement between the results obtained by the two techniques. In agreement with the expectation of smaller aperture sizes in ZIF-7-8 than in ZIF-8, the average ethane self-diffusivities in ZIF-7-8 were found to be significantly lower than the corresponding self-diffusivities in ZIF-8.

Anomaly in the Chain Length Dependence of n-Alkane Diffusion in ZIF-4 Metal-Organic Frameworks.

Molecular diffusion is commonly found to slow down with increasing molecular size. Deviations from this pattern occur in some host materials with pore sizes approaching the diameters of the guest molecules. A variety of theoretical models have been suggested to explain deviations from this pattern, but robust experimental data are scarcely available. Here, we present such data, obtained by monitoring the chain length dependence of the uptake of n-alkanes in the zeolitic imidazolate framework ZIF-4. A monotonic decrease in diffusivity from ethane to n-butane was observed, followed by an increase for n-pentane, and another decrease for n-hexane. This observation was confirmed by uptake measurements with n-butane/n-pentane mixtures, which yield faster uptake of n-pentane. Further evidence is provided by the observation of overshooting effects, i.e., by transient n-pentane concentrations exceeding the (eventually attained) equilibrium value. Accompanying grand canonical Monte Carlo simulations reveal, for the larger n-alkanes, significant differences between the adsorbed and gas phase molecular configurations, indicating strong confinement effects within ZIF-4, which, with increasing chain length, may be expected to give rise to configurational shifts facilitating molecular propagation at particular chain lengths.

Revealing the Transient Concentration of CO2 in a Mixed-Matrix Membrane by IR Microimaging and Molecular Modeling.

Through IR microimaging the spatially and temporally resolved development of the CO2 concentration in a ZIF-8@6FDA-DAM mixed matrix membrane (MMM) was visualized during transient adsorption. By recording the evolution of the CO2 concentration, it is observed that the CO2 molecules propagate from the ZIF-8 filler, which acts as a transport "highway", towards the surrounding polymer. A high-CO2 -concentration layer is formed at the MOF/polymer interface, which becomes more pronounced at higher CO2 gas pressures. A microscopic explanation of the origins of this phenomenon is suggested by means of molecular modeling. By applying a computational methodology combining quantum and force-field based calculations, the formation of microvoids at the MOF/polymer interface is predicted. Grand canonical Monte Carlo simulations further demonstrate that CO2 tends to preferentially reside in these microvoids, which is expected to facilitate CO2 accumulation at the interface.

The role of crystal diversity in understanding mass transfer in nanoporous materials.

Nanoporous materials find widespread applications in our society: from drug delivery to environmentally friendly catalysis and separation technologies. The efficient design of these processes depends crucially on understanding the mass transfer mechanism. This is conventionally determined by uptake or release experiments, carried out with assemblages of nanoporous crystals, assuming all crystals to be identical. Using micro-imaging techniques, we now show that even apparently identical crystals (that is, crystals of similar size and shape) from the same batch may exhibit very different uptake rates. The relative contribution of the surface resistance to the overall transport resistance varied with both the crystal and the guest molecule. As a consequence of this crystal diversity, the conventional approach may not distinguish correctly between the different mass transfer mechanisms. Detection of this diversity adds an important new piece of evidence in the search for the origin of the surface barrier phenomenon. Our investigations were carried out with the zeolite SAPO-34, a key material in the methanol-to-olefins (MTO) process, propane-propene separation and adsorptive heat transformation.

Transport in Nanoporous Materials Including MOFs: The Applicability of Fick's Laws.

Diffusion in nanoporous host-guest systems is often considered to be too complicated to comply with such "simple" relationships as Fick's first and second law of diffusion. However, it is shown herein that the microscopic techniques of diffusion measurement, notably the pulsed field gradient (PFG) technique of NMR spectroscopy and microimaging by interference microscopy (IFM) and IR microscopy (IRM), provide direct experimental evidence of the applicability of Fick's laws to such systems. This remains true in many situations, even when the detailed mechanism is complex. The limitations of the diffusion model are also discussed with reference to the extensive literature on this subject.

Uphill diffusion and overshooting in the adsorption of binary mixtures in nanoporous solids.

Under certain conditions, during binary mixture adsorption in nanoporous hosts, the concentration of one component may temporarily exceed its equilibrium value. This implies that, in contrast to Fick's Law, molecules must diffuse in the direction of increasing rather than decreasing concentration. Although this phenomenon of 'overshooting' has been observed previously, it is only recently, using microimaging techniques, that diffusive fluxes in the interior of nanoporous materials have become accessible to direct observation. Here we report the application of interference microscopy to monitor 'uphill' fluxes, covering the entire period of overshooting from initiation until final equilibration. It is shown that the evolution of the profiles can be adequately predicted from the single-component diffusivities together with the binary adsorption equilibrium data. The guest molecules studied (carbon dioxide, ethane and propene) and the host material (ZSM-58 or DDR) are of practical interest in relation to the development of kinetically selective adsorption separation processes.

Microimaging of transient concentration profiles of reactant and product molecules during catalytic conversion in nanoporous materials.

Microimaging by IR microscopy is applied to the recording of the evolution of the concentration profiles of reactant and product molecules during catalytic reaction, notably during the hydrogenation of benzene to cyclohexane by nickel dispersed within a nanoporous glass. Being defined as the ratio between the reaction rate in the presence of and without diffusion limitation, the effectiveness factors of catalytic reactions were previously determined by deliberately varying the extent of transport limitation by changing a suitably chosen system parameter, such as the particle size and by comparison of the respective reaction rates. With the novel options of microimaging, effectiveness factors become accessible in a single measurement by simply monitoring the distribution of the reactant molecules over the catalyst particles.

Water-mediated proton conduction in a robust triazolyl phosphonate metal-organic framework with hydrophilic nanochannels.

The development of water-mediated proton-conducting materials operating above 100 °C remains challenging because the extended structures of existing materials usually deteriorate at high temperatures. A new triazolyl phosphonate metal-organic framework (MOF) [La3L4(H2O)6]Cl⋅x H2O (1, L(2-) = 4-(4H-1,2,4-triazol-4-yl)phenyl phosphonate) with highly hydrophilic 1D channels was synthesized hydrothermally. Compound 1 is an example of a phosphonate MOF with large regular pores with 1.9 nm in diameter. It forms a water-stable, porous structure that can be reversibly hydrated and dehydrated. The proton-conducting properties of 1 were investigated by impedance spectroscopy. Magic-angle spinning (MAS) and pulse field gradient (PFG) NMR spectroscopies confirm the dynamic nature of the incorporated water molecules. The diffusivities, determined by PFG NMR and IR microscopy, were found to be close to that of liquid water. This porous framework accomplishes the challenges of water stability and proton conduction even at 110 °C. The conductivity in 1 is proposed to occur by the vehicle mechanism.

Microimaging of transient guest profiles to monitor mass transfer in nanoporous materials.

The intense interactions of guest molecules with the pore walls of nanoporous materials is the subject of continued fundamental research. Stimulated by their thermal energy, the guest molecules in these materials are subject to a continuous, irregular motion, referred to as diffusion. Diffusion, which is omnipresent in nature, influences the efficacy of nanoporous materials in reaction and separation processes. The recently introduced techniques of microimaging by interference and infrared microscopy provide us with a wealth of information on diffusion, hitherto inaccessible from commonly used techniques. Examples include the determination of surface barriers and the sticking coefficient's analogue, namely the probability that, on colliding with the particle surface, a molecule may continue its diffusion path into the interior. Microimaging is further seen to open new vistas in multicomponent guest diffusion (including the detection of a reversal in the preferred diffusion pathways), in guest-induced phase transitions in nanoporous materials and in matching the results of diffusion studies under equilibrium and non-equilibrium conditions.

Diffusion Study by IR Micro-Imaging of Molecular Uptake and Release on Mesoporous Zeolites of Structure Type CHA and LTA.

The presence of mesopores in the interior of microporous particles may significantly improve their transport properties. Complementing previous macroscopic transient sorption experiments and pulsed field gradient NMR self-diffusion studies with such materials, the present study is dedicated to an in-depth study of molecular uptake and release on the individual particles of mesoporous zeolitic specimens, notably with samples of the narrow-pore structure types, CHA and LTA. The investigations are focused on determining the time constants and functional dependences of uptake and release. They include a systematic variation of the architecture of the mesopores and of the guest molecules under study as well as a comparison of transient uptake with blocked and un-blocked mesopores. In addition to accelerating intracrystalline mass transfer, transport enhancement by mesopores is found to be, possibly, also caused by a reduction of transport resistances on the particle surfaces.

Micro-imaging of transient guest profiles in nanoporous host systems of cylindrical symmetry.

Nanoporous host materials giving rise to transient guest profiles of cylindrical symmetry during molecular uptake and release are shown to provide particularly advantageous conditions for the study of guest diffusion by micro-imaging. Considering zeolites of structure type DDR (Deca-dodecasil 3R) as a host system and short-chain length hydrocarbons as guest molecules, the benefits thus attainable in micro-imaging studies using interference microscopy are shown to include the determination of transient concentration profiles with improved accuracy, the option to overcome the disturbing impact of surface imperfections, and easy access to concentration-dependent diffusivities.

Monitoring molecular mass transfer in cation-free nanoporous host crystals of type AlPO-LTA.

Micro-imaging is employed to monitor the evolution of intra-crystalline guest profiles during molecular adsorption and desorption in cation-free zeolites AlPO-LTA. The measurements are shown to provide direct evidence on the rate of intra-crystalline diffusion and surface permeation and their inter-relation. Complemented by PFG NMR and integral IR measurements, a comprehensive overview of the diffusivities of light hydrocarbons in this important type of host materials is provided.

Micro-Imaging by Interference Microscopy: A Case Study of Orientation-Dependent Guest Diffusion in MFI-Type Zeolite Host Crystals.

Because of the small particle size, orientation-dependent diffusion measurements in microporous materials remains a challenging task. We highlight here the potential of micro-imaging by interference microscopy in a case study with MFI-type crystals in which, although with different accuracies, transient concentration profiles in all three directions can be observed. The measurements, which were performed with "rounded-boat" shaped crystals, reproduce the evolution patterns of the guest profiles recorded in previous studies with the more common "coffin-shaped" MFI crystals. The uptake and release patterns through the four principal faces (which in the coffin-shaped crystals extend in the longitudinal direction) are essentially coincident and there is no perceptible mass transfer in the direction of the long axis. The surface resistances of the four crystal faces through which mass transfer occurs are relatively small and have only a minor effect on the mass transfer rate. As a result of the pore structure, diffusion in the crystallographic c direction (which corresponds to the direction of the long axis) is expected to be much slower than in the transverse directions. This could explain the very low rate of mass transfer observed in the direction of the long axis, but it is also possible that the small end faces of the crystal may have high surface resistance. It is not possible to distinguish unequivocally between these two possibilities. All guest molecules studied (methyl-butane, benzene and 4-methyl-2-pentyne) show the same orientation dependence of mass transfer. The long 4-methyl-2-pentyne molecules would be expected to propagate at very different rates through the straight and sinusoidal channels. The coinciding patterns for uptake through the mutually perpendicular crystal faces therefore provide clear evidence that both the coffin shaped crystals and the rounded-boat-shaped crystals considered in this study, must be intergrowths rather than pure single crystals.

Nanoporous glass as a model system for a consistency check of the different techniques of diffusion measurement.

The remarkable differences in the guest diffusivities in nanoporous materials commonly found with the application of different measuring techniques are usually ascribed to the existence of a hierarchy of transport resistances in addition to the diffusional resistance of the pore system and their differing influence due to the differing diffusion path lengths covered by the different measuring techniques. We report diffusion measurements with nanoporous glasses where the existence of such resistances could be avoided. Molecular propagation over diffusion path lengths from hundreds of nanometers up to millimeters was thus found to be controlled by a uniform mechanism, appearing in coinciding results of microscopic and macroscopic diffusion measurement.

The nature of surface barriers on nanoporous solids explored by microimaging of transient guest distributions.

Nanoporous solids are attractive materials for energetically efficient and environmentally friendly catalytic and adsorption separation processes. Although the performance of such materials is largely dependent on their molecular transport properties, our fundamental understanding of these phenomena is far from complete. This is particularly true for the mechanisms that control the penetration rate through the outer surface of these materials (commonly referred to as surface barriers). Recent detailed sorption rate measurements with Zn(tbip) crystals have greatly enhanced our basic understanding of such processes. Surface resistance in this material has been shown to arise from the complete blockage of most of the pore entrances on the outer surface, while the transport resistance of the remaining open pores is negligibly small. More generally, the revealed correlation between intracrystalline diffusion and surface permeation provides a new view of the nature of transport resistances in nanoporous materials acting in addition to the diffusion resistance of the regular pore network, leading to a rational explanation of the discrepancy which is often observed between microscopic and macroscopic diffusion measurements.

In situ study on molecular diffusion phenomena in nanoporous catalytic solids.

As an omnipresent phenomenon in nature, diffusion is among the rate-determining processes in many technological processes. This is in particular true for catalytic conversion in nanoporous materials. We provide a critical review of the possibilities of exploring diffusion phenomena over microscopic dimensions in such media by direct experimental observation. By monitoring the probability distribution of molecular displacements as a function of time, the pulsed field gradient technique of NMR (PFG NMR) records the rate of molecular re-distribution. By varying the observation time, PFG NMR is thus able to trace even hierarchies of transport resistances as occurring, e.g., in catalyst particles in the form of binder-compacted assemblages of zeolite crystallites. Alternatively, and complementary to this information, interference microscopy (IFM) and IR microscopy (IRM) are able to follow the evolution of intracrystalline concentration profiles during uptake and release. This allows, in particular, an accurate quantification of the transport resistances on the surface of the individual crystallites and of the probability that reactant molecules from the gas phase, upon colliding with the external surface, are able to penetrate through such "surface barriers" into the crystal bulk phase. Being able to distinguish between different molecular species, IRM is able to record the evolution of intracrystalline concentration profiles even during multi-component adsorption and catalytic reactions (169 references).