Microwave-Dependent Thermo-Release Approach for Oligonucleotides 5'-Phosphorylation.

A method for phosphorylating oligonucleotides using a thermosensitive "trigger" is hereby presented. The recovery of the phosphate specifically takes place under neutral conditions when subjected to an elevated temperature. Two identical thermolabile protecting groups are differentially removed with the initial release occurring swiftly and the second at a more gradual pace. The delayed deprotection of the second group led to the development of a method for the purification of 5'-phosphorylated oligonucleotides. Microwave irradiation enables the rapid attainment of complete deprotection, in contrast to conventional heating methods.

From CPG to hybrid support: Review on the approaches in nucleic acids synthesis in various media.

Solid-phase synthesis is, to date, the preferred method for the manufacture of oligonucleotides, in quantities ranging from a few micrograms for research purposes to several kilograms for therapeutic or commercial use. But for large-scale oligonucleotide manufacture, scaling up and hazardous waste production pose challenges that necessitate the investigation of alternate synthetic techniques. Despite the disadvantages of glass supports, using soluble supports as a substitute presents difficulties because of their high overall yield and complex purification steps. To address these challenges, various independent approaches have been developed; however, other problems such as insufficient cycle efficiency and synthesis of oligonucleotide chains of desired length continue to exist. In this study, we present a review of the current developments, advantages, and difficulties of recently reported alternatives to supports based on controlled pore glass, and discuss the importance of a support choice to resolve issues arising during oligonucleotide synthesis.

Structural and Spectroscopic Properties of Isoconazole and Bifonazole-Experimental and Theoretical Studies.

The paper compares the experimental FT-IR, UV-vis, and 1H NMR spectra of isoconazole and bifonazole with the density functional theory (DFT) calculations using different functionals. The results were compared with previously reported data related to their analogue, posaconazole. The analysis of calculated IR spectra with use of CAM-B3LYP (isoconazole) or B3LYP (bifonazole) functionals shows good accordance with the experimental IR spectrum. The best compatibility between the experimental and theoretical UV spectra was observed with the use of B3LYP or wB97XD functionals for isoconazole or bifonazole, respectively. The reason for the difference in the UV-vis spectra of isoconazole and bifonazole was discussed based on linear response time-dependent DFT and natural bond orbital methods. The calculated 1H NMR spectrum shows that the DFT formalism, particularly the B3LYP functional, give an accurate description of the isoconazole and bifonazole chemical shifts.

Structure and Oligonucleotide Binding Efficiency of Differently Prepared Click Chemistry-Type DNA Microarray Slides Based on 3-Azidopropyltrimethoxysilane.

The structural characterization of glass slides surface-modified with 3-azidopropyltrimethoxysilane and used for anchoring nucleic acids, resulting in the so-called DNA microarrays, is presented. Depending on the silanization conditions, the slides were found to show different oligonucleotide binding efficiency, thus, an attempt was made to correlate this efficiency with the structural characteristics of the silane layers. Atomic force microscopy (AFM), X-ray photoelectron spectroscopy (XPS) and X-ray reflectometry (XRR) measurements provided information on the surface topography, chemical composition and thickness of the silane films, respectively. The surface for which the best oligonucleotides binding efficiency is observed, has been found to consist of a densely-packed silane layer, decorated with a high-number of additional clusters that are believed to host exposed azide groups.

Disulfide bridge cross-linking between protein and the RNA backbone as a tool to study RNase H1.

The chemical cross-linking of complexes of proteins with nucleic acids is often used in structural and mechanistic studies of these oftentimes unstable and transient complexes. To date, no method has been reported for the thiol-based conjugation of proteins with an RNA backbone, mainly because of instability of the modified ribonucleic acid that is functionalized at the phosphodiester and its rapid hydrolysis. Here, we report the site-specific synthesis of stable RNA oligonucleotides with a thiol-bearing linker that was attached to the phosphodiester backbone, where the ribonucleotide at the cross-linking site was either replaced with 2'-deoxy- or 2'-fluororibonucleotide. The utility of this approach was validated in cross-linking tests with RNase H1, a model protein for RNA/DNA binding and key effector in DNA-like antisense drug therapy. Furthermore, scale-up cross-linking and purification of the complexes confirmed that the method is useful for obtaining preparations of protein-RNA/DNA complexes with purity and stability that are suitable for further biochemical and structural studies. The present approach broadens the repertoire of disulfide-based cross-linking strategies and is a novel tool for the stabilization of protein-RNA complexes in which the interaction occurs via the RNA backbone. This methodology may be broadly applicable to studies of otherwise unstable or transient complexes of proteins with RNA and RNA/DNA.

Disulfide bridge as a linker in nucleic acids' bioconjugation. Part II: A summary of practical applications.

Disulfide conjugation invariably remains a key tool in research on nucleic acids. This versatile and cost-effective method plays a crucial role in structural studies of DNA and RNA as well as their interactions with other macromolecules in a variety of biological systems. In this article we review applications of disulfide-bridged conjugates of oligonucleotides with other (bio)molecules such as peptides, proteins etc. and present key findings obtained with their help.

Fluorescent 2-(Pyridin-2-yl)vinyl Pyridine Dyes and Their Thermocontrolled Release.

The generation of unique thermosensitive fluorescent dyes via heteroaromatic Heck cross-coupling and N-pyridin-2-yl nucleophilic substitution was described. To demonstrate thermosensitive properties, the precursor was converted into carbonates or phosphates and heated at various temperatures and for various time periods. Significant changes in the fluorescence intensity and emission wavelengths, between carbonates and the cyclic product, were observed, and it was proved that the dyes may serve as removable fluorescent labels with large Stokes shifts (>80 nm). The application of thermosensitive fluorescent dyes in oligonucleotide labeling has been demonstrated.

Disulfide bridge as a linker in nucleic acids' bioconjugation. Part I: An overview of synthetic strategies.

This 2-part article reviews methods of oligonucleotides functionalization with thiol tethers and their consecutive use in conjugation with other (macro)molecules via a disulfide bridge. This relatively inexpensive, robust and reversible method of conjugation of DNAs, RNAs and their analogs holds a prominent position in a modern biochemistry toolbox and therefore there is a wealth of literature on the subject. In part I methods of thiol/disulfide groups introduction into oligonucleotide strands have been systematized and discussed. A digest of conjugation methods is presented as well.

Experimental and computational studies on a protonated 2-pyridinyl moiety and its switchable effect for the design of thermolytic devices.

1D and 2D NMR investigations as well as computational studies, including static quantum-mechanics calculations, density function theory formalism, and classical molecular dynamics, were applied to determine the protonation sites in the thermolabile protecting group (TPG) containing a 2-pyridynyl moiety within its structure. This protecting group has three possible sites for protonation: an azomethine (pyridinic) atom (N1), 2-aminoethanol residue (N2), and 4-amino substituent (N4). Our investigations showed that the protonation mainly occurs on the N1 atom. Such protonation seems to be a major inhibitory factor in the thermal removal of 2-pyridynyl TPG by the "chemical switch" approach and decreases the aromaticity of the pyridine ring. We also discussed possible participation of N2 nitrogen in irreversible intramolecular cyclization under acidic conditions.

Silica Surface Modification and Its Application in Permanent Link with Nucleic Acids.

In this paper, the Pt-catalyzed hydrosilylation of hydroxyl ethers is described. Various bifunctional alkoxysilanes were obtained and applied in O-silylation of free hydroxyl groups on the silica surface. These modified solid materials have been used as excellent supports for linking synthetic nucleic acids. Nucleic acids permanently attached to the solid surface were tested in hybridization with complementary fluorescence-labeled sequences. Detection of nucleic acids anchored to the solid support was performed by fluorescence microscopy after hybridization.

EvOligo: A Novel Software to Design and Group Libraries of Oligonucleotides Applicable for Nucleic Acid-Based Experiments.

Experimental methods based on DNA and RNA hybridization, such as multiplex polymerase chain reaction, multiplex ligation-dependent probe amplification, or microarray analysis, require the use of mixtures of multiple oligonucleotides (primers or probes) in a single test tube. To provide an optimal reaction environment, minimal self- and cross-hybridization must be achieved among these oligonucleotides. To address this problem, we developed EvOligo, which is a software package that provides the means to design and group DNA and RNA molecules with defined lengths. EvOligo combines two modules. The first module performs oligonucleotide design, and the second module performs oligonucleotide grouping. The software applies a nearest-neighbor model of nucleic acid interactions coupled with a parallel evolutionary algorithm to construct individual oligonucleotides, and to group the molecules that are characterized by the weakest possible cross-interactions. To provide optimal solutions, the evolutionary algorithm sorts oligonucleotides into sets, preserves preselected parts of the oligonucleotides, and shapes their remaining parts. In addition, the oligonucleotide sets can be designed and grouped based on their melting temperatures. For the user's convenience, EvOligo is provided with a user-friendly graphical interface. EvOligo was used to design individual oligonucleotides, oligonucleotide pairs, and groups of oligonucleotide pairs that are characterized by the following parameters: (1) weaker cross-interactions between the non-complementary oligonucleotides and (2) more uniform ranges of the oligonucleotide pair melting temperatures than other available software products. In addition, in contrast to other grouping algorithms, EvOligo offers time-efficient sorting of paired and unpaired oligonucleotides based on various parameters defined by the user.

2-Pyridinyl Thermolabile Groups as General Protectants for Hydroxyl, Phosphate, and Carboxyl Functions.

Application of 2-pyridinyl thermolabile protecting groups (2-PyTPGs) for protection of hydroxyl, phosphate, and carboxyl functions is presented in this unit. Their characteristic feature is a unique removal process following the intramolecular cyclization mechanism and induced only by temperature rise. Deprotection rate of 2-PyTPGs is dependent on certain parameters, such as solvent (aqueous or non-aqueous medium), pH values, and electron distribution in a pyridine ring. The presented approach pertains not only to protecting groups but also to an advanced system of controlling certain properties of 2-pyridinyl derivatives. We improved the "chemical switch" method, allowing us to regulate the protecting group stability by inversing the electron distribution in 2-PyTPG. Together with pH values manipulation, this allows us to regulate the protecting group stability. Moreover, phosphite cyclization to oxazaphospholidine provides a very stable but easily reversible tool for phosphate protection/modifications. For all TPGs we confirmed their utility in a system of protecting groups. This concept can contribute to designing the general protecting group that could be useful in bioorganic chemistry. © 2017 by John Wiley & Sons, Inc.

2-Pyridinyl-N-(2,4-difluorobenzyl)aminoethyl Group As Thermocontrolled Implement for Protection of Carboxylic Acids.

A thermolabile protecting group strategy for carboxylic acids is expanded. Thermosensitive esters are readily prepared using a known procedure, and their stability under neutral condition is investigated. Effective thermolytic deprotection initiated only by temperature for different carboxylic acids is demonstrated, and the compatibility of a thermolytic protecting group with acidic and basic protecting groups in an orthogonal protection strategy is also presented. This study showed interesting correlations between the pKa of acids and the deprotection rate of their well-protected moieties.

Gel electrophoresis in a polyvinylalcohol coated fused silica capillary for purity assessment of modified and secondary-structured oligo- and polyribonucleotides.

Application of a polyvinylalcohol-coated (PVA-coated) capillary in capillary gel electrophoresis (CGE) enables the selective separation of oligoribonucleotides and their modifications at high resolution. Quality assessment of shorter oligomers of small interfering RNA (siRNA) is of key importance for ribonucleic acid (RNA) technology which is increasingly being applied in medical applications. CGE is a technique of choice for calculation of chemically synthesized RNAs and their modifications which are frequently obtained as a mixture including shorter oligoribonucleotides. The use of CGE with a PVA-coated capillary to analyze siRNA mixtures presents an alternative to conventionally employed techniques. Here, we present study on identification of the length and purity of RNA mixture ingredients by using PVA-coated capillaries. Also, we demonstrate the use of PVA-coated capillaries to identify and separate phosphorylated siRNAs and secondary structures (e.g. siRNA duplexes).

The "Clickable" Method for Oligonucleotide Immobilization Onto Azide-Functionalized Microarrays.

The DNA microarray technique was supposed to help identifying and analyzing the expression level of tens of thousands of genes in the whole genome. But there is a serious problem concerning fabrication of the microarrays by chemical synthesis, such as specific and efficient linking of probes to a solid support. Therefore, we reckon that applying "click" chemistry to covalently anchor oligonucleotides on chemically modified supports may help construct microarrays in applications such as gene identification. Silanization of the glass support with organofunctional silane makes it possible to link azide groups on glass surface and the nucleic acid probe that is equipped with a pentynyl group. This is followed by direct spotting of the nucleic acid on the azide-modified glass support in the presence of copper ions, and this is a frequently applied method of "click" chemistry.

Modulating the Stability of 2-Pyridinyl Thermolabile Hydroxyl Protecting Groups via the "Chemical Switch" Approach.

A novel and effective method is presented for modulating the stability of 2-Pyridinyl Thermolabile Protecting Groups (2-Py TPGs) in the "chemical switch" approach. The main advantage of the discussed approach is the possibility of changing the nucleophilic character of pyridine nitrogen using different switchable factors, which results in an increase or decrease in the thermal deprotection rate. One of the factors is transformation of a nitro into an amine group via reduction with a low-valent titanium in mild conditions. The usefulness of our approach is corroborated using 3'-O-acetyl nucleosides as model compounds. Their stability in various solvents and temperatures before and after reduction is also examined. Pyridine N-oxide and pH are other factors responsible for the nucleophilicity and stability of 2-Pyridinyl Thermolabile Protecting Groups in thermal deprotection. Protonation of 4-amino 2-Pyridinyl Thermolabile Protecting Groups is demonstrated by (1)H-(15)N HMBC and HSQC NMR analysis.

Boron Clusters as a Platform for New Materials: Synthesis of Functionalized o-Carborane (C2 B10 H12 ) Derivatives Incorporating DNA Fragments.

A synthetic strategy for functionalization of the three vertices of o-carborane and the attachment of the obtained triped to the solid support was developed. Further functionalization of the triped with short DNA sequences by automated DNA synthesis was achieved. The proposed methodology is a first example of boron cluster chemistry on a solid support opening new perspectives in boron cluster functionalization.

Investigations on Synperiplanar and Antiperiplanar Isomers of Losartan: Theoretical and Experimental NMR Studies.

Losartan inhibits the renin-angiotensin-aldosterone system by blocking the angiotensin II receptor. It is commonly used in cardiovascular diseases, such as hypertension. Several publications applied the ab initio and density functional theory methods to investigate the molecule of losartan. Only in one of them were the nuclear magnetic resonance spectra calculations carried out, and their results were correlated with the experimental values. The authors focused their attention on calculations of the anion form of losartan, taking into consideration both its synperiplanar and antiperiplanar configurations. Coefficients of determination and mean absolute deviation parameters were calculated for the experimental and calculated chemical shifts for every used basis set. They showed a noticeably stronger correlation for the anti-isomers than for the syn-isomers. Moreover, the solvation model increased the value of this parameter. The results of calculations confirmed that an anti-conformation of the analyte seems to be the preferred one, and such an orientation might be most potent within the receptor cavity, which is in agreement with the results of previous studies.

Novel method of synthesis of 5''-phosphate 2'-O-ribosyl-ribonucleosides and their 3'-phosphoramidites.

Synthesis of 5''-phosphate 2'-O-ribosylribonucleosides [Nr(p)] of four common ribonucleosides, and 3'-phosphoramidites of 5''-phosphate 2'-O-ribosyladenosine and 2'-O-ribosylguanosine using the H-phosphonate chemistry is described. An additional ring protected by benzoyl groups was incorporated into the main ribosyl ring in the reaction with 1-O-acetyl-2,3,5-tri-O-benzoyl-ß-D-ribofuranose in the presence of SnCl4. The obtained 2'-O-ribosylribonucleosides (Nr) were applied in the subsequent transformations with selective deprotection. Ethanolamine was applied as a very convenient reagent for selective removal of benzoyl groups. Additionally, the tetraisopropyldisiloxane-1,3-diyl (TIPDSi) group was found to be stable under these deprotection conditions. Thus, the selectively deprotected 5''-hydroxyl group of Nr was transformed into an H-phosphonate monoester which was found to be stable under the following conditions: the removal of the TIPDSi group with triethylammonium fluoride and the dimethoxytritylation of the 5''-hydroxyl function. The 5''-H-phosphonate of Nr precursors was easily transformed to the corresponding dicyanoethyl 5''-O-phosphotriesters before phosphitylation, which gave 3'-phosphoramidite units of Nr(p) in high yield. The derived phosphoramidite units were used in an automated oligonucleotide synthesizer to produce dimer Ar(p)T via the phosphoramidite approach. The obtained products were fully deprotected under standard deprotection conditions giving dimers with a 5''-phosphate monoester function. Application of an alkaline phosphatase to prove the presence of an additional phosphate group was described.

Oxidation of H-phosphonates with iodine by intramolecular support of a 2-pyridyl thermolabile protecting group.

Acceleration of H-phosphonate diester oxidation with iodine accompanied by a thermolabile protecting group (TPG) is presented. It is shown that the intermediate product of this reaction is an oxazaphospholidine oxide which forms a phosphate diester only when a 2-pyridyl TPG is applied. The intermediate product is formed with exocyclic nitrogen. The absolute configurations of phosphorothioate diesters, H-phosphonate diesters, and oxazaphospholidine oxides were determined. (31)P NMR spectroscopy was used to evaluate the relationship between chemical shift and absolute configuration at the phosphorus center of H-phosphonate diesters and oxazaphospholidine oxides.