Precision-Engineered Medium-Sized Molecular Host and Emitter for Ensuring Consistent Performance in Solution-Processed Narrowband OLEDs.

In this study, two novel multiple resonance (MR) emitters, DtCzBN and Cy-DtCzBN, were designed based on the well-known BCzBN structure and synthesized for narrowband solution-processed organic light-emitting diodes (OLEDs). Cy-DtCzBN possesses a dimeric V-shaped structure formed by coupling two individual DtCzBN units via a nonconjugated cyclohexane linker. When compared with DtCzBN, Cy-DtCzBN, as a medium-sized molecule, was found to maintain the optical and photophysical properties of the corresponding monomeric unit, DtCzBN, but exhibits high thermal stability, excellent solubility, and good film-forming ability. Additionally, solution-processed OLEDs were fabricated by using two sets of molecules: one set of small molecular hosts and emitters (i.e., mCP and DtCzBN) and the other set of medium-sized molecular hosts and emitters (i.e., Cy-mCP and Cy-DtCzBN). Notably, devices using medium-sized molecular hosts and emitters exhibited similar optical and photophysical properties but showed significantly improved reproducibility and thermal stability compared with those based on small molecular hosts and emitters. Our current study provides some insights into molecular design strategies for thermally stable hosts and emitters, which are highly suitable for solution-processed OLEDs.

Stretchable Semiconducting Polymers with Hydrogen-Bonding-Capable Conjugation Breakers: Synthesis and Application in Organic Thin-Film Transistors.

Diketopyrrolopyrrole (DPP)-based conjugated copolymers are important organic semiconductors for applications in high-efficiency organic thin-film transistors (OTFTs). However, the direct application of these polymers with rigid backbones in stretchable devices has limitations. In this study, we designed and synthesized three kinds of DPPBT-based copolymers, DPPBT-A1, DPPBT-A3, and DPPBT-A5, which have amide-coupled alkylene conjugation breakers capable of hydrogen bonding. Linkers with different segment lengths were copolymerized with DPP and bithiophene (BT) backbone units. A DPP-based copolymer with alternating BT moieties, DPPBT, was synthesized as a reference fully conjugated copolymer. The synthesized polymers with freely rotational backbone linkers have sufficient flexibility to develop ordered phase domains, even in thin films, in comparison to the reference copolymer. However, the introduction of the conjugation breakers, which disconnect the intramolecular π-π overlapping, tends to decrease the hole mobility (µ) from 0.76 to 0.20 cm2 V-1 s-1 in the corresponding OTFT devices. The TFT fabricated using DPPBT-A3 showed a mobility of 0.50 cm2 V-1 s-1, and the mobility value did not show a significant change even when elongated by more than 50%. Therefore, the molecular design strategy of introducing amide-coupled alkylene conjugation breakers into conjugated polymer chains can contribute significantly to the development of high-mobility stretchable conjugated polymers in future.

Novel π-Extended Indolocarbazole-Based Deep-Blue Fluorescent Emitter with Remarkably Narrow Bandwidth for Solution-Processed Organic Light-Emitting Diodes.

In solution-processed organic light-emitting diodes (OLEDs), achieving high color purity and efficiency is as important as that in vacuum processes. Emitters suitable for solution processing must have excellent solubility in organic solvents, high molecular weight, and compatibility with the host materials. In this study, we synthesized a deep-blue emitter that satisfies the above conditions by introducing a 1,4-bis(indolo[3,2,1-jk]carbazol-2-yl)benzene-based planar emitting core (DICz) structure and four 3,6-di-tert-butyl-9-phenyl-9H-carbazole (tCz) peripheral units, namely, 4tCz-DICz. A comparative compound, 4Hex-DICz, incorporating hexyl phenyl groups was synthesized. In contrast to 4Hex-DICz, 4tCz-DICz exhibited exceptional solubility in organic solvents and superior film-forming properties attributed to the presence of tCz units. Additionally, in the film state, the effective encapsulation of the emitting core (DICz) by the tCz units in 4tCz-DICz helps prevent undesirable molecular aggregation. The solution-processed OLEDs employing the CH-2D1 film, doped with 5 wt % 4tCz-DICz as the emitting layer, exhibited a deep-blue emission at 424 nm, characterized by a narrow bandwidth of 22 nm, and achieved a maximum external quantum efficiency (EQE) of approximately 4.0%. In contrast, the 4Hex-DICz-based device demonstrated an EQE of 2.91%. Consequently, we have successfully demonstrated that the introduction of four bulky tCz units into the DICz core is a promising molecular design strategy for the development of soluble indolocarbazole-based emitters, especially those used in high-performance deep-blue fluorescent OLEDs.

Influence of Chemical and Genetic Manipulations on Cellular Organelles Quantified by Label-Free Optical Diffraction Tomography.

Label-free optical diffraction tomography provides three-dimensional imaging of cells and organelles, along with their refractive index (RI) and volume. These physical parameters are valuable for quantitative and accurate analysis of the subcellular microenvironment and its connections to intracellular biological properties. In biological and biochemical cell analysis, various invasive cell manipulations are used, such as temperature change, chemical fixation, live cell staining with fluorescent dye, and gene overexpression of exogenous proteins. However, it is not fully understood how these various manipulations affect the physicochemical properties of different organelles. In this study, we investigated the impact of these manipulations on the cellular properties of single HeLa cells. We found that after cell fixation and an increase in temperature, the RI value of organelles, such as the nucleus and cytoplasm, significantly decreased overall. Interestingly, unlike the cell nuclei, cytoplasmic RI values were hardly detected after membrane permeation, indicating that only intracytoplasmic components were largely lost. Additionally, our findings revealed that the expression of GFP and GFP-tagged proteins significantly increased the RI values of organelles in living cells compared to the less effective RI changes observed with chemical fluorescence staining for cell organelles. The result demonstrates that distinct types of invasive manipulations can alter the microenvironment of organelles in different ways. Our study sheds new light on how chemical and genetic manipulations affect organelles.

Rational Molecular Design Strategy for Host Materials in Thermally Activated Delayed Fluorescence-OLEDs Suitable for Solution Processing.

Herein, a novel core molecule for V-shaped host molecules was synthesized, wherein two carbazoles were directly linked to cyclohexane. Cy-mCP and Cy-mCBP hosts were also successfully prepared for solution-processable thermally activated delayed fluorescence organic light-emitting diodes (TADF-OLEDs). The Cy-mCP and Cy-mCBP molecules contained a cyclohexane linker directly linked to two small molecular hosts (mCP and mCBP), exhibiting twice the molecular weight while maintaining the basic properties of a single host molecule with improved film-forming ability and solubility in organic solvents. These host materials showed superior thermal stability and high glass transition temperatures compared to lower molecular weight hosts. Green TADF-OLEDs were prepared using the two host materials and 2,4,5,6-tetra(3,6-di-tert-butylcarbazol-9-yl)-1,3-dicyanobenzene (t4CzIPN) emitter, achieving device efficiencies similar to that of a low-molecular-weight host. However, after the incorporation of a V-shaped host, superior characteristics were observed in terms of the thermal stability and operational stability of the device. The synthesis of V-shaped molecules by directly linking two carbazoles to a cyclohexane linker is promising for the development of different hosts for solution-processable OLEDs.

Enhanced Efficiency and Stability of Novel Pseudo-ternary Polymer Solar Cells Enabled by a Conjugated Donor Block Copolymer.

The recent breakthrough in power conversion efficiencies (PCEs) of polymer solar cells (PSCs) that contain an active layer of a ternary system has achieved values of 18-19%; this has sparked interest for further research. However, this system has difficulties in optimizing the composition and controlling the interaction between the three active materials. In this study, we investigated the use of a donor1 (D1)-donor2 (D2) conjugated block copolymer (CBP), PM6-b-TT, to replace the physical blend of two donors. PM6-b-TT, which exhibits an extended absorption range, was synthesized by covalently bonding PM6, a medium-band gap polymer, with PBDT-TT, a wide-band gap polymer. The blend films containing PM6-b-TT and Y6-BO acceptor, demonstrated excellent crystallinity and a film morphology favorable for PSCs. The corresponding pseudo-ternary PSC exhibited significantly higher PCE and thermal stability than the PM6:PBDT-TT-based ternary device. This study unambiguously demonstrates that the novel D1-D2 CBP strategy, combined with the conventional binary and ternary system advantages, is a promising material production strategy that can boost the performance of future PSCs.

Universal Polymeric Hole Transporting Material for Solution-Processable Green and Blue Thermally Activated Delayed Fluorescence OLEDs.

To obtain high-efficiency solution-processed organic light-emitting diodes (OLEDs), a hole transport material (HTM) capable of solution processing with excellent charge transport properties is required. In this study, a new vinyl polymer (PmCP) containing hole-transporting 1,3-di(9H-carbazol-9-yl)benzene (mCP) in the side chain was successfully synthesized via radical polymerization. PmCP showed good film-forming ability and thermal stability. Moreover, PmCP has a higher triplet energy value and hole mobility than poly(N-vinylcarbazole) (PVK) used as a reference HTM, which can be applied as a hole transport layer (HTL) in thermally activated delayed fluorescence (TADF) OLEDs, providing green and blue emissions. PmCP-based solution-processable TADF-OLEDs containing green- and blue-emitting layers were easily fabricated without damaging the lower HTL while using ethyl acetate as an orthogonal solvent. The corresponding OLEDs possess high external quantum efficiencies of 29.60% and 11.00% for the green- and blue-emitting devices, respectively. They show superior performances compared to PVK-based devices used as a reference. It was confirmed that PmCP as a solution-processable HTM can replace PVK and is universally applicable to both green- and blue-emitting devices.

Uniform Silver Nanowire Patterned Electrode on Robust PEN Substrate Using Poly(2-hydroxyethyl methacrylate) Underlayer.

Silver nanowire (AgNW) electrodes are among the most essential flexible transparent electrodes (FTEs) emerging as promising alternatives to brittle indium tin oxide (ITO) electrodes. The polymer comprising the plastic substrate to which the AgNWs are applied must also satisfy the mechanical requirements of the final device and withstand the device processing conditions. However, AgNW-based FTEs have some limitations, such as poor adhesion to coated plastic substrates, surface roughness, and difficulty in patterning. This study demonstrates a new strategy for creating AgNW-based patterned flexible poly(ethylene 2,6-naphthalate) (PEN)-based electrodes with appreciable optical and electrical properties. Introducing poly(2-hydroxyethyl methacrylate) on the PEN substrate enhanced the adhesion between the substrate and AgNWs and improved the dispersibility of the AgNWs. Poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) and a small amount of 2,4-hexadiyne-1,6-diol as a photosensitizer were coated onto the AgNW layer to improve the surface roughness and achieve an effective electrode pattern. By varying the AgNW concentration, we could tune the density and thickness of the AgNWs to optimize the sheet resistance and transmittance. Optimized AgNWs with a sheet resistance of 22.6 Ω/□ and transmittance of 92.3% at 550 nm were achieved. A polymer solar cell (PSC) was fabricated to evaluate the characteristics of the device employing the flexible electrodes. This PSC showed not only a high power conversion efficiency of 11.20%, similar to that of ITO-based devices, but also excellent mechanical stability, which is difficult to achieve in ITO-based flexible devices.

Customized Orthogonal Solvent System with Various Hole-Transporting Polymers for Highly Reproducible Solution-Processable Organic Light-Emitting Diodes.

Recently, various hosts and emitters for solution-processable thermally activated delayed fluorescence organic light-emitting diodes (TADF-OLEDs) have been developed. However, a few studies have been conducted on hole transport materials (HTMs) with differentiated solubility characteristics for manufacturing multilayer OLEDs using a solution process. Here, three new hole transport (HT) styrene polymers, PICz, PPBCz, and PTPCz, were synthesized by radical polymerization. Each of the polymers exhibited increases in their highest occupied molecular orbital (HOMO) levels and better hole-transporting abilities than poly(9-vinylcarbazole) (PVK) as a reference HT polymer. Furthermore, the three HT polymers exhibited different solubilities in toluene. Therefore, it was not possible to use a toluene solution to prepare the emitting layer (EML). To overcome this problem, ethyl acetate (EA), in which the three HT polymers are insoluble, was used as an orthogonal solvent to prepare an EML solution. In EA-solution-processed green-emitting TADF-OLEDs, the three HT-polymer-based devices displayed somewhat low turn-on voltages of 2.8 V and high external quantum efficiencies (EQEs) of >23%. These values are superior to those of a device with a PVK-HT layer. In addition, the devices manufactured with the EA solution showed high-performance reproducibility owing to the stable formation of each layer. In this study, we removed the HTM solubility constraint by dramatically changing the solvent for preparing the EML solution and provided an efficient strategy for the fabrication of OLED devices via solution processes in the future.

Mapping the broadband circular dichroism of copolymer films with supramolecular chirality in time and space.

Measurements of the electronic circular dichroism (CD) are highly sensitive to the absolute configuration and conformation of chiral molecules and supramolecular assemblies and have therefore found widespread application in the chemical and biological sciences. Here, we demonstrate an approach to simultaneously follow changes in the CD and absorption response of photoexcited systems over the ultraviolet-visible spectral range with 100 fs time resolution. We apply the concept to chiral polyfluorene copolymer thin films and track their electronic relaxation in detail. The transient CD signal stems from the supramolecular response of the system and provides information regarding the recovery of the electronic ground state. This allows for a quantification of singlet-singlet annihilation and charge-pair formation processes. Spatial mapping of chiral domains on femtosecond time scales with a resolution of 50 µm and diffraction-limited steady-state imaging of the circular dichroism and the circularly polarised luminescence (CPL) of the films is demonstrated.

Patterned Sandwich-Type Silver Nanowire-Based Flexible Electrode by Photolithography.

Silver nanowires (AgNWs) are one of the important flexible electrode material candidates that can replace brittle indium tin oxide (ITO). In this work, we demonstrated novel patterned sandwich-type AgNW-based transparent electrodes easily prepared using the photolithography method for application in flexible devices. A cross-linked underlayer was introduced to increase the adhesion properties between a poly(ethylene terephthalate) substrate and AgNWs, and as a result, a uniform AgNW layer was easily deposited. Finally, the AgNW layer could be easily patterned by introducing a photocross-linkable upper layer without lift-off, dry transfer, and removal methods. A mixture of poly(sodium-4-styrene sulfonate) (PSS-Na+) and 2,4-hexadiyne-1,6-diol (HDD), which is a component of the upper layer, exhibited good cross-linking properties as well as excellent adhesion to the AgNW layer. Through the above method, it was possible to easily fabricate a patterned electrode with smooth surface morphology. Moreover, AgNW-based patterned electrodes exhibit good optical and electrical properties (Rs = 29.8 Ω/□, T550 nm = 94.6%), making them suitable for optoelectronic devices. Flexible polymer solar cells (PSCs) using patterned AgNW electrodes showed a high power conversion efficiency of over 10%, which is comparable to that of PSCs using rigid ITO electrodes. In addition, the high mechanical stability of AgNW-based PSCs was confirmed by bending experiments.

Aryl-Annulated [3,2-a] Carbazole-Based Deep-Blue Soluble Emitters for High-Efficiency Solution-Processed Thermally Activated Delayed Fluorescence Organic Light-Emitting Diodes with CIEy <0.1.

In this study, we demonstrated two deep-blue TADF emitters, BO-tCzPhICz and BO-tCzDICz, for solution-processable thermally activated delayed fluorescence organic light-emitting diodes (TADF-OLEDs). They were synthesized by employing an organoboron acceptor and 9-(3,6-di-tert-butyl-9H-carbazol-9-yl)-5-phenyl-5,12-dihydroindolo[3,2-a]carbazole (tCzPhICz) and 12-(3,6-di-tert-butyl-9H-carbazol-9-yl)-15H-diindolo[2,3-b:1',2',3'-lm]carbazole (tCzDICz) as bulky aryl-annulated [3,2-a] carbazole donors, respectively. Both emitters showed sufficient solubility in organic solvents, narrow deep-blue emission, and small energy difference (ΔEST) between singlet and triplet states, which can be applied to solution-processable deep-blue TADF-OLEDs. Solution-processed OLEDs exploiting these TADF emitters displayed deep-blue electroluminescence with CIEy <0.1, and high external quantum efficiencies of 17.8 and 14.8% were observed for BO-tCzPhICz and BO-tCzDICz, respectively. The emitter bearing bulky ICz-based donating units shows highly promising potential for high-efficiency solution-processable deep-blue TADF-OLEDs.

Physical Properties of Thermally Crosslinked Fluorinated Polyimide and Its Application to a Liquid Crystal Alignment Layer.

This study demonstrated the use of a thermally crosslinked polyimide (PI) for the liquid crystal (LC) alignment layer of an LC display (LCD) cell. Polyamic acid was prepared using 4,4'-oxydianiline (ODA) and 4,4'-(hexafluoroisopropylidene) diphthalic anhydride (6FDA). The 6FDA-ODA-based polyimide (PI) prepared by the thermal cyclic dehydration of the polyamic acid (PAA) was soluble in various polar solvents. After forming a thin film by mixing trifunctional epoxide [4-(oxiran-2-ylmethoxy)-N,N-bis(oxiran-2-ylmethyl)aniline] with the 6FDA-ODA-based PAA, it was confirmed that thermal curing at -110 °C caused an epoxy ring opening reaction, which could result in the formation of a networked polyimide not soluble in tetrahydrofuran. The crosslinked PI film showed a higher rigidity than the neat PI films, as measured by the elastic modulus. Furthermore, based on a dynamic mechanical analysis of the neat PI and crosslinked PI films, the glass transition temperatures (Tgs) were 217 and 339 °C, respectively, which provided further evidence of the formation of crosslinking by the addition of the epoxy reagent. After mechanical rubbing using these two PI films, an LC cell was fabricated using an anisotropic PI film as an LC alignment film. LC cells with crosslinked PI layers showed a high voltage holding ratio and low residual direct current voltage. This suggests that the crosslinked PI has good potential for use as an LC alignment layer material in advanced LCD technologies that require high performance and reliability.

Novel V-Shaped Bipolar Host Materials for Solution-Processed Thermally Activated Delayed Fluorescence OLEDs.

Three V-shaped host molecules with a cyclohexane linker were successfully synthesized for thermally activated delayed fluorescence organic light-emitting diodes (TADF-OLEDs). The unipolar host molecules, BBCzC and BTDC, contained two 9-phenyl-9H-3,9'-bicarbazole (PBCz) moieties and two 2,12-di-tert-butyl-7-phenyl-5,9-dioxa-13b-boranaphtho[3,2,1-de]anthracene (PDBNA) moieties, respectively. BCzTC, a bipolar host molecule, consisted of a donor unit, PBCz, and an acceptor unit, PDBNA, connected by a cyclohexane linker. Three host molecules showed good solubility in various organic solvents, making them suitable for solution processing. Among the solution-processed green TADF-OLEDs using three host molecules and a green TADF emitter, the one with BCzTC showed the highest external quantum efficiency of up to 30% with a high power efficiency of 71 lm W-1 and a current efficiency of 102 cd A-1. Compared with BBCzC and BTDC, BCzTC exhibited a relatively high photoluminescence quantum yield (PLQY), an excellent balance in hole and electron transport properties in the emitting layer, and more efficient energy transfer to the emitter, giving such an excellent device performance.

Improved Stability of All-Polymer Solar Cells Using Crosslinkable Donor and Acceptor Polymers Bearing Vinyl Moieties in the Side-Chains.

Crosslinkable polymers have attracted tremendous attention in various fields of science and technology, owing to their potential utilization in applications requiring dimensional and morphological stability under thermal and mechanical stress. In this study, random terpolymers were successfully synthesized by introducing thiophene-based monomers bearing vinyl functional groups in the side-chain of the polymer donor (PBDBT-BV20) and polymer acceptor (N2200-TV10) structures. The physical properties of the blend films of PBDBT-BV20 and N2200-TV10 before and after thermal crosslinking were extensively investigated and compared to those of the homogeneous individual polymer films. The results revealed that a network polymer with donor and acceptor polymer chains, which can lock the internal morphology, could be achieved by inducing crosslinking between the vinyl groups in the mixed state of PBDBT-BV20 and N2200-TV10. In addition, the power conversion efficiency (PCE) of the polymer solar cells (PSCs) containing the blend films that were crosslinked by a two-step thermal annealing process was improved. The enhanced PCE could be attributed to the individual crystallization of PBDBT-BV20 and N2200-TV10 in the blend phase at 120 °C and then thermal crosslinking at 140 °C. In addition, the PSCs with the crosslinked blend film exhibited an excellent shelf-life of over 1200 h and a thermally stable PCE. Furthermore, the crosslinked blend film exhibited excellent mechanical stability under bending stress in flexible PSCs using plastic substrates.

Nonhalogenated Solvent-Processed High-Performance Indoor Photovoltaics Made of New Conjugated Terpolymers with Optimized Monomer Compositions.

Conjugated random terpolymers, PJ-25, PJ-50, and PJ-75 were successfully synthesized from three different monomers. Fluorine-substituted benzotriazole (2F-BTA) was incorporated into 4,8-bis(4-chlorothiophen-2-yl)benzo[1,2-b:4,5-b']dithiophene (BDT-T-Cl) and a 1,3-bis(4-(2-ethylhexyl)thiophen-2-yl)-5,7-bis(2-alkyl)benzo[1,2-c:4,5-c']dithiophene-4,8-dione (BDD)-based alternating copolymer PM7 as a third monomeric unit. The solubility of the random terpolymers in nonhalogenated solvents increased with the number of 2F-BTA units in PM7. The random terpolymers were mixed with 3,9-bis(2-methylene-((3-(1,1-dicyanomethylene)-6,7-difluoro)-indanone))-5,5,11,11-tetrakis(4-hexylphenyl)-dithieno[2,3-d:2',3'-d']-s-indaceno[1,2-b:5,6-b']dithiophene (IT-4F) to fabricate organic photovoltaic (OPV) cells. Among the three terpolymers and two related binary copolymers (e.g., PM7 and J52-Cl), outdoor photovoltaic (PV) cells (AM 1.5G) based on the PJ-50:IT-4F blend showed a high power conversion efficiency (PCE) of 11.34%. In addition, PJ-50 was employed as a donor in indoor PV (IPV) cells and was blended with nonfullerene acceptors, which have different absorption ranges. Among them, the PJ-50:IT-4F-based IPV device had the highest PCE of 17.41% with a Jsc of 54.75 µA cm-2 and an FF of 0.77 under 160 µW cm-2 light-emitting diode (LED) light. The terpolymer introduced in this study can be regarded as a promising material for the fabrication of outdoor PV and IPV cells with excellent performance involving the use of an eco-friendly solvent.

Dynamics of Photoinduced Energy Transfer in Fully and Partially Conjugated Polymers Bearing π-Extended Donor and Acceptor Monomers.

The photophysical properties of donor (D)-acceptor (A) polymers were studied by designing two types of polymers, (D-σ-A) n and (D-π-A) n , with non-conjugated alkyl (sp 3) and π-conjugated (sp 2) linkers using π-extended donor and acceptor monomers that exhibit planar A-D-A structures. The non-conjugated alkyl linker provides structural flexibility to the (D-σ-A) n polymers, while the π-conjugated linker retains the rigid structure of the (D-π-A) n polymers. Photoinduced energy transfer occurs from the large donor to acceptor units in both polymers. However, the photoinduced energy transfer dynamics are found to be dependent on the conformation of the polymers, where the difference is dictated by the types of linkers between the donor and acceptor units. In solution, intramolecular energy transfer is relatively favorable for the (D-σ-A) n polymers with flexible linkers that allow the donor and acceptor units to be proximally located in the polymers. On the other hand, intermolecular (or interchain) energy transfer is dominant in the two polymer films because the π-extended donor and acceptor units in polymers are closely packed. The structural flexibility of the linkers between the donor and acceptor repeating units in the polymers affects the efficiency of energy transfer between the donor and acceptor units and the overall photophysical properties of the polymers.

Asymmetric Host Molecule Bearing Pyridine Core for Highly Efficient Blue Thermally Activated Delayed Fluorescence OLEDs.

In this study, two host materials, pCzBzbCz and pCzPybCz, are synthesized to achieve a high efficiency and long lifetime of blue thermally activated delayed fluorescence organic light-emitting diodes (TADF-OLEDs). The molecular design strategy involves the introduction of a pyridine group into the core structure of pCzPybCz as an electron-withdrawing unit, and an electron-donating phenyl group into the structure of pCzBzbCz. These host materials demonstrate good thermal stability and high triplet energy (T1 =3.07 eV for pCzBzbCz and 3.06 eV for pCzPybCz) for the fabrication of blue TADF-OLEDs. In particular, pCzPybCz-based OLED devices demonstrate an external quantum efficiency (EQE) of 22.7 % and an operational lifetime of 24 h (LT90 , time to attain 90 % of initial luminance) at an initial luminance of 1000 cd m-2 . This superior lifetime could be explained by the C-N bond dissociation energy (BDE) in the host molecular structure. Furthermore, a mixed-host system using the electron-deficient 2,4-bis(dibenzo[b,d]furan-2-yl)-6-phenyl-1,3,5-triazine (DDBFT) is proposed to inhibit the formation of the anion state of our host materials. In short, the device operational lifetime is further improved by applying DDBFT. The carbazole-based asymmetric host molecule containing a pyridine core realizes a high-efficiency blue TADF-OLED showing a positive effect on the operating lifetime, and can provide useful strategies for designing new host materials.

High-Performance, Solution-Processable Thermally Activated Delayed Fluorescent Organic Light-Emitting Diodes Realized via the Adjustment of the Composition of the Organoboron Acceptor Monomer in Copolymer Host Materials.

Organic polymers that exhibit features pertinent to functioning as host materials for thermally activated delayed fluorescence (TADF) emitters have considerable potential in solution-processable organic light-emitting diodes (OLEDs), allowing simple, low-cost, and large-area applications. In particular, polymer hosts have superior characteristics, including facile functionality to introduce various electron donor and acceptor entities, the ability to uniformly disperse and contain small molecular dopants, and the ability to produce more smooth and homogeneous films, compared to those of their small-molecule counterparts. This manuscript describes the design and development of three new styrene-based copolymers (ABP91, ABP73, and ABP55) bearing diphenylacridine as the electron donor and 2,12-di-tert-butyl-7-phenyl-5,9-dioxa-13b-boranaphtho[3,2,1-de]anthracene as the electron acceptor. In particular, ABP91, ABP73, and ABP55 were synthesized via variations in the ratio of donor to acceptor monomers to substantiate their influence in OLED applications. With the ability of the styrene backbone of interrupting the direct electronic coupling between the adjacent electron donor and acceptor entities through non-conjugated linkages, high triplet energy can be inherited by the resulting polymers (>2.70 eV). Furthermore, these materials manifest thermal robustness through high decomposition temperatures (between 348 and 366 °C) and high glass transition temperatures (between 234 and 277 °C). Consequently, solution-processable OLEDs fabricated using the newly synthesized copolymers as host materials and the familiar t4CzIPN as a green-emissive TADF dopant deliver state-of-the-art performance with maximum external quantum efficiencies of 21.8, 22.2, and 19.7% for ABP91, ABP73, and ABP55, respectively. To our knowledge, this is, to date, the best performance reported when organic polymers are used as host materials in solution-processable TADF OLEDs. The pragmatic outcomes obtained in this study can provide useful insights into the structure-property relationship to the OLED community for the further development of efficient polymer hosts for use in solution-processable TADF OLEDs.

5H-Benzo[d]Benzo[4,5]Imidazo[2,1-b][1,3]Thiazine as a Novel Electron-Acceptor Cored High Triplet Energy Bipolar Host Material for Efficient Solution-Processable Thermally Activated Delayed Fluorescence Organic Light-Emitting Diodes.

Organic entities that can transport electrons are seldom available to develop adequate bipolar host materials applicable for solution-processable thermally activated delayed fluorescence (TADF)-organic light-emitting diodes (OLEDs). Therefore, the introduction of new electron-affine entities that plausibly demonstrate high triplet energy (E T) is of urgent need. In this contribution, we introduced benzimidazo[1,2-a][3,1]benzothiazine (BBIT) as a novel electron-affine entity and developed two new bipolar host materials, CzBBIT and 2CzBBIT. Both host materials exhibit high E T of 3.0 eV, superior thermal robustness with the thermal decomposition temperature of up to 392°C, a glass transition temperature of up to 161°C, and high solubility in common organic solvents. Consequently, the solution-processable OLEDs fabricated using a recognized IAcTr-out as the green TADF emitter doped into CzBBIT as the host, realized a maximum external quantum efficiency (EQE) of 23.3%, while the 2CzBBIT:IAcTr-out blend film-based device displayed an EQE of 18.7%. These outcomes corroborated that this work could shed light on the scientific community on the design of new electron-affine entities to establish the effective use of bipolar host materials toward proficient solution-processable TADF-OLEDs.