RESUMO
Neuroblastoma is the most common extracranial malignant tumor of childhood, accounting for 15% of all pediatric cancer deaths. Despite significant advances in our understanding of neuroblastoma biology, five-year survival rates for high-risk disease remain less than 50%, highlighting the importance of identifying novel therapeutic targets to combat the disease. MYCN amplification is the most frequent and predictive molecular aberration correlating with poor outcome in neuroblastoma. N-Myc is a short-lived protein primarily due to its rapid proteasomal degradation, a potentially exploitable vulnerability in neuroblastoma. AF1q is an oncoprotein with established roles in leukemia and solid tumor progression. It is normally expressed in brain and sympathetic neurons and has been postulated to play a part in neural differentiation. However, no role for AF1q in tumors of neural origin has been reported. In this study, we found AF1q to be a universal marker of neuroblastoma tumors. Silencing AF1q in neuroblastoma cells caused proteasomal degradation of N-Myc through Ras/ERK and AKT/GSK3ß pathways, activated p53 and blocked cell cycle progression, culminating in cell death via the intrinsic apoptotic pathway. Moreover, silencing AF1q attenuated neuroblastoma tumorigenicity in vivo signifying AF1q's importance in neuroblastoma oncogenesis. Our findings reveal AF1q to be a novel regulator of N-Myc and potential therapeutic target in neuroblastoma.
Assuntos
Neuroblastoma , Criança , Humanos , Proteína Proto-Oncogênica N-Myc/genética , Proteína Proto-Oncogênica N-Myc/metabolismo , Neuroblastoma/patologia , Proteínas Oncogênicas/metabolismo , Transformação Celular Neoplásica , Fatores de Transcrição/metabolismo , Carcinogênese/genética , Linhagem Celular Tumoral , Regulação Neoplásica da Expressão GênicaRESUMO
Legacy polyfluoroalkyl substances (PFAS) [perfluorooctanesulfonate (PFOS) and perfluorooctanoic acid (PFOA)] are being replaced by various other fluorinated compounds, such as hexafluoropropylene oxide dimer acid (GenX). These alternatives are thought to be less bioaccumulative and, therefore, less toxic than legacy PFAS. Contaminant exposures occur concurrently with exposure to natural stressors, including the fungal pathogen Batrachocytrium dendrobatidis (Bd). Despite evidence that other pollutants can increase the adverse effects of Bd on anurans, no studies have examined the interactive effects of Bd and PFAS. This study tested the growth and developmental effects of PFOS, PFOA, and GenX on gray treefrog (Hyla versicolor) tadpoles, followed by a Bd challenge after metamorphosis. Despite PFAS exposure only occurring during the larval stage, carry-over effects on growth were observed post metamorphosis. Further, PFAS interacted with Bd exposure to influence growth; Bd-exposed animals had significantly shorter SVL [snout-vent length (mm)] with significantly increased body condition, among other time-dependent effects. Our data suggest that larval exposure to PFAS can continue to impact growth in the juvenile stage after exposure has ended. Contrary to predictions, GenX affected terrestrial performance more consistently than its legacy congener, PFOA. Given the role of Bd in amphibian declines, further investigation of interactions of PFAS with Bd and other environmentally relevant pathogens is warranted.
Assuntos
Ácidos Alcanossulfônicos , Fluorocarbonos , Animais , Larva/microbiologia , Fluorocarbonos/toxicidade , Anuros/microbiologia , Ácidos Alcanossulfônicos/toxicidadeRESUMO
While foam fractionation (FF) process has emerged as a promising technology for removal of per- and polyfluoroalkyl substances (PFASs) from contaminated groundwater, management of the resulting foam concentrates with elevated concentrations of PFASs (e.g., >1 g/L) remains a challenge. Here, we applied hydrothermal alkaline treatment (HALT) to two foam concentrates derived from FF field demonstration projects that treated aqueous film-forming foam (AFFF)-impacted groundwater. Results showed >90% degradation and defluorination within 90 min of treatment (350 °C, 1 M NaOH) of all 62 PFASs (including cations, anions, and zwitterions) identified in foam concentrates. Observed rate constants for degradation of individual perfluoroalkyl sulfonates (PFSAs, CnF2n+1-SO3-), the most recalcitrant class of PFASs, in both foam concentrates were similar to values measured previously in other aqueous matrices, indicating that elevated initial PFAS concentrations (e.g., PFHxSinit = 0.55 g/L), dissolved organic carbon (DOC; up to 4.5 g/L), and salt levels (e.g., up to 325 mg/L chloride) do not significantly affect PFAS reaction kinetics. DOC was partially mineralized by treatment, but a fraction (â¼15%) was recalcitrant. Spectroscopic characterization revealed molecular features of the HALT-recalcitrant DOC fraction, and nontarget high-resolution mass spectrometry tentatively identified 129 nonfluorinated HALT-recalcitrant molecules. Analysis of process energy requirements shows that treating PFAS-contaminated foam concentrates with HALT would add minimally (<5%) to the overall energy requirements of an integrated FF-HALT treatment train.
Assuntos
Fluorocarbonos , Água Subterrânea , Poluentes Químicos da Água , Poluentes Químicos da Água/análise , Fluorocarbonos/análise , Água Subterrânea/química , Água , Cloretos/análiseRESUMO
Drinking water treatment residuals (DWTRs), solid by-products of drinking water treatment, are dominated by calcium (Ca), iron (Fe), or aluminum (Al), depending on the coagulant used. DWTRs are often landfilled, but current research is exploring options for beneficial reuse. Previous studies have shown that Al- and Fe-rich materials have potential to reduce the mobility of per- and polyfluoroalkyl substances (PFAS). Here, we investigated how amending biosolids with 5% wt/wt DWTRs affected plant bioavailable PFAS in two different simulated scenarios: (1) agricultural scenario with Solanum lycopersicum (tomato) grown in soil amended with an agronomically relevant rate of DWTR-amended biosolids (0.9% w/w, resulting in 0.045% w/w DWTR in the biosolids-amended soil) and (2) mine reclamation scenario examining PFAS uptake by Lolium perenne (perennial ryegrass) grown in soil that received DWTR-amended biosolids amendment at a rate consistent with the mine remediation (13% w/w, resulting in 0.65% w/w DWTR in the biosolids-amended soil). Amending biosolids with Ca-DWTR significantly reduced perfluorobutanoic acid (PFBA) uptake in ryegrass and perfluorohexanoic acid uptake in tomatoes, possibly due to DWTR-induced pH elevation, while Fe-DWTR amendment reduced PFBA bioaccumulation in ryegrass. The Al-DWTR did not induce a significant reduction in accumulated PFAS compared to controls. Although the reasons for this finding are unclear, the relatively low PFAS concentrations in the biosolids and relatively high Al content in the biosolids and soil may be partially responsible.
RESUMO
Per- and polyfluoroalkyl substances (PFAS) occur in the environment as mixtures, yet mixture toxicity remains poorly understood. Aqueous film-forming foams (AFFFs) are a common source of PFAS. Our objective was to examine chronic effects of a complex PFAS mixture on amphibian growth and development. We tested toxicity of a five-chemical PFAS mixture summing to 10 µg/L and that accounts for >90% of the PFAS in AFFF-affected surface waters: perfluorooctane sulfonate (PFOS, 40%), perfluorohexane sulfonic acid (PFHxS, 30%), perflurooctanoic acid (PFOA, 12.5%), perfluorohexanoic acid (PFHxA, 12.5%), and perfluoropentanoic acid (PFPeA, 5%). We also included treatments to determine whether PFOS drove mixture toxicity and whether PFOS and mixture components act additively. We exposed Northern leopard frog (Rana pipiens) larvae through metamorphosis (â¼130 d) in outdoor mesocosms. After 21 days of exposure, the larval body condition fell â¼5% relative to controls in the 4 µg/L PFOS treatment and mixtures lacking PFOS. At metamorphosis, the full 5-component 10 µg/L PFAS mixture reduced mass by 16% relative to controls. We did not observe effects on development. Our results indicate that toxicity of PFOS and other PFAS mixtures typical of AFFF sites act additively and that PFOS is not more inherently toxic than other mixture components.
Assuntos
Ácidos Alcanossulfônicos , Fluorocarbonos , Poluentes Químicos da Água , Animais , Água , Rana pipiens , Poluentes Químicos da Água/toxicidade , Poluentes Químicos da Água/análise , Ácidos Alcanossulfônicos/toxicidade , Fluorocarbonos/toxicidade , Fluorocarbonos/análise , Larva , Tamanho CorporalRESUMO
Air-water interfacial retention of poly- and perfluoroalkyl substances (PFASs) is increasingly recognized as an important environmental process. Herein, column transport experiments were used to measure air-water interfacial partitioning values for several perfluoroalkyl ethers and for PFASs derived from aqueous film-forming foam, while batch experiments were used to determine equilibrium Kia data for compounds exhibiting evidence of rate-limited partitioning. Experimental results suggest a Freundlich isotherm best describes PFAS air-water partitioning at environmentally relevant concentrations (101-106 ng/L). A multiparameter regression analysis for Kia prediction was performed for the 15 PFASs for which equilibrium Kia values were determined, assessing 246 possible combinations of 8 physicochemical and system properties. Quantitative structure-property relationships (QSPRs) based on three to four parameters provided predictions of high accuracy without model overparameterization. Two QSPRs (R2 values of 0.92 and 0.83) were developed using an assumed average Freundlich n value of 0.65 and validated across a range of relevant concentrations for perfluorooctane sulfonate (PFOS), perfluorooctanoate (PFOA), and hexafluoropropylene oxide-dimer acid (i.e., GenX). A mass action model was further modified to account for the changing ionic strength on PFAS air-water interfacial sorption. The final result was two distinct QSPRs for estimating PFAS air-water interfacial partitioning across a range of aqueous concentrations and ionic strengths.
Assuntos
Ácidos Alcanossulfônicos , Fluorocarbonos , Poluentes Químicos da Água , Água , Fluorocarbonos/análise , Éteres , Poluentes Químicos da Água/análise , Concentração OsmolarRESUMO
Per- and polyfluoroalkyl substances (PFAS) are a class of highly persistent contaminants that have been linked to human health effects at low exposure concentrations. Public concerns exist that land-application of biosolids may result in the release of PFAS into terrestrial and aquatic ecosystems. The relative importance of inorganic constituents such as Fe and Al, which are known to impact PFAS retention/release behavior in soils, on PFAS release from wastewater residuals (WWRs, i.e., biosolids and sewage sludges) is not well understood. Here, we examine native concentrations and WWR-water partition coefficients of a range of PFAS in the context of WWRs characteristics including oxalate-extractable Fe and Al, organic matter (OM), dissolved organic carbon, and total protein content. Total PFAS concentrations, which included perfluoroalkyl carboxylates, perfluoroalkyl sulfonates, fluorotelomer sulfonates and some sulfonamides, ranged from â¼480 to 3500 µg PFAS kg-1 dry weight. PFAS WWR-water partition coefficients ranged from â¼10 to 20,000 L kg-1, consistent with the literature. PFAS partitioning was significantly correlated to oxalate extractable Al and Fe as well as bulk OM and protein content. These results have important implications for wastewater treatment facilities that recycle Al- and Fe-based drinking water treatment residuals in terms of both PFAS retention and loading.
Assuntos
Fluorocarbonos , Poluentes Químicos da Água , Humanos , Águas Residuárias , Fluorocarbonos/análise , Biossólidos , Ecossistema , Esgotos , Poluentes Químicos da Água/análiseRESUMO
Per- and polyfluoroalkyl substances (PFAS) pose significant environmental and human health risks and thus require solutions for their removal and destruction. However, PFAS cannot be destroyed by widely used removal processes like nanofiltration (NF). A few scarcely implemented advanced oxidation processes can degrade PFAS. In this study, we apply an electric field to a membrane system by placing a nanofiltration membrane between reactive electrodes in a crossflow configuration. The performance of perfluorooctanoic acid (PFOA) rejection, water flux, and energy consumption were evaluated. The reactive and robust SnO2-Sb porous anode was created via a sintering and sol-gel process. The characterization and analysis techniques included field emission scanning electron microscopy (FE-SEM), X-ray photoelectron spectroscopy (XPS), X-ray diffraction (XRD), ion chromatography, mass spectroscopy, porosimeter, and pH meter. The PFOA rejection increased from 45% (0 V) to 97% (30 V) when the electric field and filtration were in the same direction, while rejection capabilities worsened in opposite directions. With saline solutions (1 mM Na2SO4) present, the induced electro-oxidation process could effectively mineralize PFOA, although this led to unstable removal and water fluxes. The design achieved an exceptional performance in the nonsaline feed of 97% PFOA rejection and water flux of 68.4 L/m2 hr while requiring only 7.31 × 10-5 kWh/m3/order of electrical energy. The approach's success is attributed to the proximity of the electrodes and membrane, which causes a stronger electric field, weakened concentration polarization, and reduced mass transfer distances of PFOA near the membrane. The proposed electric field-assisted nanofiltration design provides a practical membrane separation method for PFAS removal from water.
Assuntos
Fluorocarbonos , Poluentes Químicos da Água , Humanos , Água , Caprilatos/química , Eletricidade , Poluentes Químicos da Água/químicaRESUMO
The exceptional thermal and chemical stability and the amphiphilicity of per- and polyfluoroalkyl substances (PFAS) have resulted in widespread use and subsequent contamination in environmental media and biota. Concerns surrounding toxicity have led to numerous animal-based toxicity studies. Due to the ubiquity of PFAS and the low parts per trillion (ppt) health advisory levels for drinking water, several contamination elimination protocols have been implemented. In addition, it is urgently necessary to perform low-dose experiments, but due to unknown pathways for entry of unwanted PFAS, low-dose studies are extremely challenging to conduct. However, animal feed sources are a likely route that could introduce unwanted PFAS into experiments, yet investigations of PFAS in common animal feeds are lacking. Here, we report the examination of PFAS levels in eighteen different animal feeds, representing a range of diets fed to diverse taxa. We evaluated whether PFAS levels in feeds were correlated with ingredient composition (plant versus animal-based) or dietary habits of lab animals (amphibian, fish, invertebrate, mammal). PFOS, PFHxS, PFOA, and short-chain perfluoroalkyl carboxylic acids had the highest detection levels and frequencies across all samples. Different food ingredients led to different PFAS profiles. No meaningful levels of PFAS precursors were detected. We demonstrate that PFAS contamination in animal feed is pervasive. Reducing food-sourced PFAS is a critical, albeit challenging task to improve interpretability of in vivo exposures.
Assuntos
Ácidos Alcanossulfônicos , Água Potável , Fluorocarbonos , Poluentes Químicos da Água , Animais , Fluorocarbonos/toxicidade , Fluorocarbonos/análise , Água Potável/química , Dieta , Ração Animal , Ácidos Carboxílicos , Ácidos Alcanossulfônicos/toxicidade , Poluentes Químicos da Água/toxicidade , MamíferosRESUMO
Per- and polyfluoroalkyl substances (PFAS) are persistent environmental contaminants known to adversely affect health and development in many taxa. Although PFAS generally occur as mixtures in the environment, little is known about the effects of PFAS mixtures on organisms compared to single chemical exposures. Moreover, PFAS exposure in nature occurs alongside biotic factors such as parasitism. Even though host-parasite interactions are common in natural systems, there is little information about how PFAS affect these interactions. Here, we examined the effects of PFAS mixtures on the susceptibility of larval American bullfrogs (Rana catesbeiana) to echinostomes. Our PFAS treatments included perfluorooctanesulfonic acid (PFOS) at 4 and 10 ppb, two mixtures without PFOS as a component at 6 and 10 ppb total PFAS, and a mixture containing PFOS at 10 ppb total PFAS. We found that a 62-day PFAS exposure increased parasite loads by 42-100% in all treatments relative to the control. Additionally, we found that the singular exposure to PFOS increased parasite loads by â¼40% compared to a mixture containing PFOS suggesting antagonism among PFAS in mixtures. Our results highlight the need for further investigation into the effects of PFAS mixtures on organisms and how PFAS affect common ecological interactions.
Assuntos
Ácidos Alcanossulfônicos , Poluentes Ambientais , Fluorocarbonos , Parasitos , Animais , Fluorocarbonos/toxicidade , Fluorocarbonos/análise , Rana catesbeiana , Larva , Ácidos Alcanossulfônicos/toxicidadeRESUMO
Sites impacted by aqueous film-forming foam (AFFF) contain co-contaminants that can stimulate biotransformation of polyfluoroalkyl substances. Here, we compare how microbial enrichments from AFFF-impacted soil amended with diethyl glycol monobutyl ether (found in AFFF), aromatic hydrocarbons (present in co-released fuels), acetate, and methane (substrates used or formed during bioremediation) impact the aerobic biotransformation of an AFFF-derived six-carbon electrochemical fluorination (ECF) precursor N-dimethyl ammonio propyl perfluorohexane sulfonamide (AmPr-FHxSA). We found that methane- and acetate-oxidizing cultures resulted in the highest yields of identifiable products (38 and 30%, respectively), including perfluorohexane sulfonamide (FHxSA) and perfluorohexane sulfonic acid (PFHxS). Using these data, we propose and detail a transformation pathway. Additionally, we examined chemical oxidation products of AmPr-FHxSA and FHxSA to provide insights on remediation strategies for AmPr-FHxSA. We demonstrate mineralization of these compounds using the sulfate radical and test their transformation during the total oxidizable precursor (TOP) assay. While perfluorohexanoic acid accounted for over 95% of the products formed, we demonstrate here for the first time two ECF-based precursors, AmPr-FHxSA and FHxSA, that produce PFHxS during the TOP assay. These findings have implications for monitoring poly- and perfluoroalkyl substances during site remediation and application of the TOP assay at sites impacted by ECF-based precursors.
Assuntos
Fluorocarbonos , Poluentes Químicos da Água , Fluorocarbonos/análise , Carbono , Poluentes Químicos da Água/análise , Água , Sulfanilamida , Sulfonamidas , MetanoRESUMO
Hydrothermal alkaline treatment (HALT) can effectively degrade per- and polyfluoroalkyl substances (PFASs) present in aqueous film-forming foam (AFFF). However, information is lacking regarding the treatment of PFASs in actual groundwater and soil from AFFF-impacted sites, especially for complex soil matrices. Given the lack of studies on direct soil treatment for PFAS destruction, we herein applied HALT to two groundwater samples and three soil samples from AFFF-impacted sites and characterized the destruction of PFASs using high-resolution mass spectrometry. Results showed that the 148 PFASs identified in all collected field samples, including 10 cationic, 98 anionic, and 40 zwitterionic PFASs, were mostly degraded to nondetectable levels within 90 min when treated with 5 M NaOH at 350 °C. The near-complete defluorination, as evidenced by fluoride release measurements, confirmed the complete destruction of PFASs. While many structures, including perfluoroalkyl carboxylic acids and polyfluorinated substances, were readily degraded, perfluoroalkyl sulfonates (PFSAs, CnF2n+1-SO3-), most notably with short chain lengths (n = 3-5), were more recalcitrant. Rates of PFSA destruction in groundwater samples were similar to those measured in laboratory water solutions, but reactions in soil were slow, presumably due to base-neutralizing properties of the soil. Further, the degradation of PFASs in groundwaters and soils was found to be a function of reaction temperature, NaOH concentration, and reaction time. These findings have important implications for the remediation of AFFF-impacted sites.
Assuntos
Fluorocarbonos , Água Subterrânea , Poluentes Químicos da Água , Fluorocarbonos/análise , Água Subterrânea/química , Hidróxido de Sódio/análise , Solo , Água , Poluentes Químicos da Água/análiseRESUMO
Predicting the transport of perfluoroalkyl acids (PFAAs) in the vadose zone is critically important for PFAA site cleanup and risk mitigation. PFAAs exhibit several unusual and poorly understood transport behaviors, including partitioning to the air-water interface, which is currently the subject of debate. This study develops a novel use of quasi-saturated (residual air saturation) column experiments to estimate chemical partitioning parameters of both linear and branched perfluorooctane sulfonate (PFOS) in unsaturated soils. The ratio of linear-to-branched air-water interfacial partitioning constants for all six experiments was 1.62 ± 0.24, indicating significantly greater partitioning of linear PFOS isomers at the air-water interface. Standard breakthrough curve analysis and numerical inversion of HYDRUS models support the application of a Freundlich isotherm for PFOS air-water interfacial partitioning below a critical reference concentration (CRC). Data from this study and previously reported unsaturated column data on perfluorooctanoate (PFOA) were reevaluated to examine unsaturated systems for transport nonidealities. This reanalysis suggests both transport nonidealities and Freundlich isotherm behavior for PFOA below the CRC using drainage-based column methods, contrary to the assertions of the original authors. Finally, a combined Freundlich-Langmuir isotherm was proposed to describe PFAA air-water interfacial partitioning across the full range of relevant PFAA concentrations.
Assuntos
Ácidos Alcanossulfônicos , Fluorocarbonos , Poluentes Químicos da Água , Ácidos Alcanossulfônicos/análise , Caprilatos/análise , Fluorocarbonos/análise , Isomerismo , Porosidade , Água , Poluentes Químicos da Água/análiseRESUMO
Per- and polyfluoroalkyl substances (PFASs) used in aqueous film-forming foam (AFFF) comprise some perfluoroalkyl substances but a larger variety of polyfluoroalkyl substances. Despite their abundance in AFFF, information is lacking on the potential transformation of these polyfluoroalkyl substances. Due to the biological and chemical stability of the repeating perfluoroalkyl -(CF2)n- moiety common to all known AFFF-derived PFASs, it is not immediately evident whether the microbial biotransformation mechanisms observed for other organic contaminants also govern the microbial biotransformation of polyfluoroalkyl substances. Herein, we aim to: 1) review the literature on the aerobic or anaerobic microbial biotransformation of AFFF-derived polyfluoroalkyl substances in environmental media; 2) compile and summarize proposed microbial biotransformation pathways for major classes of polyfluoroalkyl substances; 3) identify the dominant biotransformation intermediates and terminal biotransformation products; and 4) discuss these findings in the context of environmental monitoring and source allocation. This analysis revealed that much more is currently known about aerobic microbial biotransformation of polyfluoroalkyl substances, as compared to anaerobic biotransformation. Further, there are some similarities in microbial biotransformations of fluorotelomer and electrochemical fluorination-derived polyfluoroalkyl substances, but differences may be largely due to head group composition. Dealkylation, oxidation, and hydrolytic reactions appear to be particularly important for microbial biotransformation of AFFF-derived polyfluoroalkyl substances, and these biotransformations may lead to formation of some semi-stable intermediates. Finally, this review discusses key knowledge gaps and opportunities for further research.
Assuntos
Fluorocarbonos , Poluentes Químicos da Água , Biotransformação , Monitoramento Ambiental , Fluorocarbonos/análise , Água/análise , Poluentes Químicos da Água/análiseRESUMO
Aqueous film-forming foams (AFFFs) are important sources of per- and polyfluoroalkyl substances (PFASs) in soil, groundwater, and surface water. Soil microorganisms can convert polyfluorinated substances into persistent perfluoroalkyl acids, but the understanding of co-contaminant stimulation or inhibition of PFASs biotransformation is limited. In this study, we investigate how aerobic biotransformation of polyfluorinated substances was affected by common AFFF co-contaminants, such as gasoline aromatics: benzene, toluene, ethylbenzene, and o-xylene (BTEX). We performed aerobic microcosm studies by inoculating AFFF-impacted soil with medium containing 6:2 fluorotelomer thioether amido sulfonate (FtTAoS) and either diethyl glycol monobutyl ether (DGBE), a common AFFF ingredient, or BTEX compounds as the main carbon and energy source. BTEX-amended microcosms produced 4.3-5.3 fold more perfluoroalkyl carboxylates (PFCAs) than DGBE-amended ones, even though both organic carbon sources induced similar 6:2 FtTAoS biotransformation rates. In enrichments of AFFF-impacted solids selecting for BTEX biodegradation, we detected the presence of genes encoding toluene dioxygenase as well as larger abundances of transformation products from thioether oxidation that complement larger quantities of terminal transformation products. Our findings indicate that enrichment of BTEX-degrading microorganisms in the AFFF-impacted soil enhanced the conversion of 6:2 FtTAoS to PFCAs. These results provide insights into the high ratio of PFAAs to precursors at AFFF-impacted sites with history of BTEX bioremediation.
Assuntos
Fluorocarbonos , Poluentes Químicos da Água , Biodegradação Ambiental , Biotransformação , Ácidos Carboxílicos , Fluorocarbonos/análise , Sulfetos , Tensoativos , Poluentes Químicos da Água/análiseRESUMO
A key gap in the literature on the treatment of per- and polyfluoroalkyl substances (PFAS) in impacted water is the absence of a review article dedicated to anion exchange resin (AER) treatment. This gap is important because previous research has consistently shown adsorption by AER to be one of the most effective treatment processes for PFAS removal from impacted water, and AER is one of the most commonly deployed technologies in the field. Given the scope of the previous review articles on PFAS removal by various adsorbent types, the sections on AER do not explore the full depth of PFAS and AER interactions nor cover the breadth of AER testing conditions. Accordingly, the goal of this paper was to critically review the available peer-reviewed literature on PFAS removal from water by AER. The specific objectives of the review were to synthesize the previous literature results on (1) batch adsorption behavior, (2) impact of water chemistry conditions, (3) continuous-flow adsorption, (4) adsorption modeling, (5) regeneration, and (6) weak-base AER. Following from critical review of the literature, the future research priorities discussed include: (i) improving the underlying science that governs PFAS-resin interactions, (ii) improving methods for resin regeneration and management of PFAS-contaminated concentrate streams, and (iii) comparative life cycle environmental and economic analyses for ion exchange treatment systems relative to competing technologies.
Assuntos
Fluorocarbonos , Poluentes Químicos da Água , Purificação da Água , Resinas de Troca Aniônica , Fluorocarbonos/análise , Água , Poluentes Químicos da Água/análiseRESUMO
Per-and poly-fluoroalkyl substances (PFASs) are a class of persistent compounds that are resistant to degradation. Here we developed an effective method of degrading perfluorooctanesulfonate (PFOS) by hydrated electrons (eaq-) that are generated from 3-indole-acetic-acid (IAA) upon UV irradiation. The method takes advantage of spatial proximity of IAA and PFOS by their co-sorption to an organic polymer, 12-aminolauric acid (ALA), which was pre-intercalated into the interlayer space of an expandable clay mineral, montmorillonite. The interlayer spacing of this clay nanocomposite is greatly expanded relative to unmodified montmorillonite. The maximum adsorption capacity of IAA and PFOS is 168 and 1550 mmol/kg, respectively. This process achieved 40-70% defluorination of a 10 ppm PFOS solution at neutral pH in a 325 mL vessel. The presence of bicarbonate and chloride ions, or natural groundwater showed a minimal impact on PFOS degradation. Based on identification of prominent degradation products, a degradation pathway is proposed, where the primary degradation process is breakage of the C-F bonds (with fluorine replaced by hydrogen), with some cleavage of the CC bond. This approach provides an alternative for treating concentrated PFAS solutions under ambient conditions.
Assuntos
Ácidos Alcanossulfônicos , Fluorocarbonos , Bentonita , ElétronsRESUMO
Despite benefits to the firefighting industry, the release of per- and polyfluoroalkyl substances (PFASs) from aqueous film-forming foam (AFFF) into aquatic systems poses significant risks to human health and other organisms. While anion-exchange technologies have proven to be effective for removing perfluoroalkyl acids (PFAAs) from water, their effectiveness for removing the diverse PFAS structures discovered in AFFF remains unknown. Here, we report on the adsorption of 75 PFASs, including 63 polyfluorinated substances, in a diluted AFFF mixture using 14 commercially available ion-exchange (IX)/nonionic resins and granular activated carbon (GAC). Results showed that anion-exchange resins (AERs) exhibited significant adsorption of PFASs compared to cation-exchange resins (CERs), nonionic resins (NIRs), and GAC regardless of the PFAS's predicted charge. Isotherm data showed that macroporous AERs have a higher PFAS adsorption capacity compared to gel-type AERs. Cross-correlation comparison of PFAS/Cl- selectivity coefficients (Kex) for each PFAS-AER combination showed that the hydrophobicity of the AER functional group, and polymer matrix played a dominant role in determining resin affinity for PFASs. PFAS structural characteristics also significantly affected adsorption, with increasing chain length and a net negative charge increasing the extent of adsorption. Results from this study provide guidelines for the selection of resins to adsorb a wider range of PFASs and meaningful insights for the development of quantitative models for IX treatment of AFFF-impacted water.
Assuntos
Fluorocarbonos , Poluentes Químicos da Água , Aerossóis , Carvão Vegetal , Fluorocarbonos/análise , Humanos , Água , Poluentes Químicos da Água/análiseRESUMO
The widespread use of aqueous film-forming foam (AFFF) for firefighting activities (e.g., fire training to extinguish fuel-based fires at aircraft facilities) has led to extensive groundwater and soil contamination by per- and polyfluoroalkyl substances (PFASs) that are highly recalcitrant to destruction using conventional treatment technologies. This study reports on the hydrothermal alkaline treatment of diverse PFASs present in AFFFs. Quantitative and semiquantitative high-resolution mass spectrometry analyses of PFASs demonstrate a rapid degradation of all 109 PFASs identified in two AFFFs (sulfonate- and fluorotelomer-based formulations) in water amended with an alkali (e.g., 1-5 M NaOH) at near-critical temperature and pressure (350 °C, 16.5 MPa). This includes per- and polyfluoroalkyl acids and a range of acid precursors. Most PFASs were degraded to nondetectable levels within 15 min, and the most recalcitrant perfluoroalkyl sulfonates were degraded within 30 min when treated with 5 M NaOH. 19F NMR spectroscopic analysis and fluoride ion analysis confirm the near-complete defluorination of PFASs in both dilute and concentrated AFFF mixtures, and no stable volatile organofluorine species were detected in reactor headspace gases by the gas chromatography-mass spectrometry analysis. These findings indicate a significant potential for application of hydrothermal treatment technologies to manage PFAS waste streams, including on-site treatment of unused AFFF chemical stockpiles, investigation-derived wastes, and concentrated source zone materials.
Assuntos
Fluorocarbonos , Água Subterrânea , Poluentes Químicos da Água , Fluorocarbonos/análise , Solo , Água , Poluentes Químicos da Água/análiseRESUMO
The degradation and distribution of bisphenol A (BPA), bisphenol S (BPS) and bisphenol AF (BPAF) were evaluated in dilute anaerobic sludge slurries amended with a single bisphenol or a mixture of all three and maintained under methanogenic conditions over a 28-d period. No significant degradation of the bisphenols was observed in methane-generating microcosms. Rapid sorption to sludge particles was the primary removal process with sorption observed: BPAF > BPA > BPS. Several other trace organic chemicals of concern in the sludge were detected using quadrupole time of flight mass spectrometry. Of those detected, triclosan and triclocarban had sufficiently high intensities to quantify changes over the 28-d period in the bisphenol-amended microcosms. Similar to the bisphenols, triclosan and triclocarban concentrations also did not significantly change over the 28-d period with concentrations quantified at 2021 ± 627 and 1864 ± 769â µg/kg dry weight, respectively. Findings exemplify that methane-generating microcosms do not appear conducive to significant degradation of trace organics of concern in anaerobic sludge digesters.