RESUMO
Global warming and climate change represent the most significant threats to humanity in the 21st century, both of which are manmade catastrophes. Addressing climate change requires corrective action across all aspects of modern human life and work, including the medical field. Among healthcare sectors, dialysis units stand out as major contributors to plastic waste and excessive water consumption. It is imperative for hemodialysis units to lead by example in the judicious use of natural resources. This systemic review is aimed to establish a bare minimum of recommendations for environmental sustainability across Indian dialysis units, and to guide future initiatives to reduce the environmental impact of dialysis process. A literature search was conducted on PubMed, and Google to retrieve articles or studies related to green dialysis. The predefined keyword search yielded a total of 291 studies. A total of 54 studies and articles which were relevant to study question, and fulfilled inclusion criteria, were retrieved and analyzed to form opinions on the implementation of green dialysis initiatives from an Indian perspective. Green dialysis initiatives are much-needed reforms to be adopted by the Indian dialysis community. Through careful planning and minimal efforts, substantial amounts of water used in hemodialysis can be conserved and repurposed for other hospital activities. Similarly, the vast majority of discarded plastic waste can be recycled or reused. Despite controversy, reconsidering the risk-benefit aspects of dialyzer reuse is essential, particularly in the context of resource-limited developing nations like India.
RESUMO
Background: In the current scenario, the synthesis of nanoparticles (NPs) using environmentally benign methods has gained significant attention due to their facile processes, cost-effectiveness, and eco-friendly nature. Methods: In the present study, copper oxide nanoparticles (CuO NPs) were synthesized using aqueous extract of Coelastrella terrestris algae as a reducing, stabilizing, and capping agent. The synthesized CuO NPs were characterized by X-ray diffraction (XRD), UV-visible spectroscopy (UV-Vis), Fourier transform infrared spectroscopy (FTIR), dynamic light scattering (DLS), and field emission scanning electron microscopy (FE-SEM) coupled with energy-dispersive X-ray spectroscopy (EDS). Results: XRD investigation revealed that the biosynthesized CuO NPs were nanocrystalline with high-phase purity and size in the range of 4.26 nm to 28.51 nm. FTIR spectra confirmed the existence of secondary metabolites on the surface of the synthesized CuO NPs, with characteristic Cu-O vibrations being identified around 600 cm-1, 496 cm-1, and 440 cm-1. The FE-SEM images predicted that the enhancement of the algal extract amount converted the flattened rice-like structures of CuO NPs into flower petal-like structures. Furthermore, the degradation ability of biosynthesized CuO NPs was investigated against Amido black 10B (AB10B) dye. The results displayed that the optimal degradation efficacy of AB10B dye was 94.19%, obtained at 6 pH, 50 ppm concentration of dye, and 0.05 g dosage of CuO NPs in 90 min with a pseudo-first-order rate constant of 0.0296 min-1. The CuO-1 NPs synthesized through algae exhibited notable antibacterial efficacy against S. aureus with a zone of inhibition (ZOI) of 22 mm and against P. aeruginosa with a ZOI of 17 mm. Conclusion: Based on the findings of this study, it can be concluded that utilizing Coelastrella terrestris algae for the synthesis of CuO NPs presents a promising solution for addressing environmental contamination.
Assuntos
Antibacterianos , Cobre , Química Verde , Nanopartículas Metálicas , Cobre/química , Antibacterianos/química , Antibacterianos/farmacologia , Antibacterianos/síntese química , Química Verde/métodos , Nanopartículas Metálicas/química , Catálise , Extratos Vegetais/química , Extratos Vegetais/farmacologia , Tamanho da Partícula , Testes de Sensibilidade Microbiana , Staphylococcus aureus/efeitos dos fármacos , Difração de Raios X , Espectroscopia de Infravermelho com Transformada de FourierRESUMO
In recent years, there has been an increasing interest in the green synthesis of metallic nanoparticles, mostly because of the evident limitations associated with chemical and physical methods. Green synthesis, commonly referred to as "biogenic synthesis," is seen as an alternative approach to produce AgNPs (silver nanoparticles). The current work focuses on the use of Asterarcys sp. (microalga) for biological reduction of AgNO3 to produce AgNPs. The optimal parameters for the reduction of AgNPs were determined as molarity of 3 mM for AgNO3 and an incubation duration of 24 h at pH 9, using a 20:80 ratio of algal extract to AgNO3. The biosynthesized Ast-AgNPs were characterised using ultraviolet-visible spectroscopy (UV-Vis), zeta potential, scanning electron microscopy (SEM), Fourier-transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), energy-dispersive X-ray spectroscopy (EDX), and high-resolution transmission electron microscopy (HR-TEM) with selected area electron diffraction (SAED) patterns. The nanoparticles exhibited their highest absorption in the UV-visible spectra at 425 nm. The X-ray diffraction (XRD) investigation indicated the presence of characteristic peaks at certain angles: 38.30° (1 1 1), 44.40° (2 0 0), 64.64° (2 2 0), and 77.59° (3 1 1) according to the JCPDS file No. 04-0783. Based on SEM and TEM, the Ast-AgNPs had an average size of 35 nm and 52 nm, respectively. The zeta potential was determined to be - 20.8 mV, indicating their stability. The highest antibacterial effectiveness is shown against Staphylococcus aureus, with a zone of inhibition of 25.66 ± 1.52 mm at 250 µL/mL conc. of Ast-AgNPs. Likewise, Ast-AgNPs significantly suppressed the growth of Fusarium sp. and Curvularia sp. by 78.22% and 85.05%, respectively, at 150 µL/mL conc. of Ast-AgNPs. In addition, the Ast-AgNPs exhibited significant photocatalytic activity in degrading methylene blue (MB), achieving an 88.59% degradation in 120 min, revealing multiple downstream applications of Ast-AgNPs.
Assuntos
Química Verde , Nanopartículas Metálicas , Prata , Prata/química , Nanopartículas Metálicas/química , Química Verde/métodos , Antibacterianos/química , Antibacterianos/farmacologia , Microalgas/química , Testes de Sensibilidade Microbiana , Difração de Raios X , Staphylococcus aureus/efeitos dos fármacosRESUMO
BACKGROUND: The challenge of pigeonpea breeding lies in its photosensitivity and seasonal specificity. This poses a problem to the breeder, as it restricts to single generation advancement in a year. Currently, the cross to cultivar gap is twelve to thirteen years resulting in a limited number of varietal releases over the past six decades. Shortening the breeding cycle was need of the hour, unlikely achieved by conventional breeding. To overcome these hindrances speed breeding was a necessary leap. An experiment was planned to optimize the speed breeding coupled with single seed descent and seed or pod chip-based genotyping to shorten the breeding cycle in pigeonpea at ICRISAT, Hyderabad. Monitored photoperiod, light wavelength, temperature and crop management regime were the indicators attributing to the success of speed breeding. RESULT: A photoperiod of 13 h: 8 h: 13 h at vegetative: flowering and pod filling stages is ideal for shortening the breeding cycle. Broad spectrum light (5700 K LED) hastened early vegetative growth and pod formation. Whereas far-red (735 nm) light favoured early flowering. A significant difference between the photoperiods, genotypes as well as photoperiod x genotype interaction for both days to flowering and plant height was noted. CONCLUSION: The optimized protocol serves as a road map for rapid generation advancement in pigeonpea. Deploying this protocol, it is possible to advance 2-4 generations per year. The breeding cycle can be reduced to 2-4 years which otherwise takes 7 years under conventional breeding. Single Seed Descent and seed or pod chip-based genotyping for early generation marker assisted selection, strengthened the precision of this technique aiding in high throughput line development.
RESUMO
The present article explores the synthesis of copper oxide nanoparticles (CuO NPs) utilizing Asterarcys quadricellulare algal extract and examines the effect of various reaction parameters on the size and morphology of the nanoparticles. The samples were thoroughly characterized using XRD, FTIR, UV-vis, FE-SEM, and EDS techniques. The XRD analysis disclosed that the size of the synthesized nanoparticles could be controlled by adjusting the reaction parameters, ranging from 4.76 nm to 13.70 nm along the highest intensity plane (111). FTIR spectroscopy provided evidence that the phytochemicals are present in the algal extract. We have compared the photocatalytic activity of biologically and chemically synthesized CuO NPs and observed that biologically synthesized CuO NPs showed better photocatalytic activity than chemically synthesized CuO NPs. The biosynthesized CuO NPs (S8) demonstrated outstanding photodegradation activity towards four different organic dyes, namely BBY, BG, EBT, and MG, with degradation percentages of 95.78%, 98.02%, 94.15%, and 96.04%, respectively. The maximum degradation efficacy of 98.02% was observed for the BG dye at optimized reaction conditions and 60 min of visible light exposure. The kinetics of the photodegradation reaction followed the pseudo-first-order kinetic model, and the rate constant (k) was calculated using the Langmuir-Hinshelwood model for each dye. This study provides an efficient and sustainable approach for synthesizing CuO NPs with superior photocatalytic degradation efficiency towards organic dyes.
RESUMO
Introduction: Millets are nutritionally superior and climate-resilient short-duration crops and hold a prominent place in cropping sequences around the world. They have immense potential to grow in a marginal environment due to diverse adaptive mechanisms. Methods: An experiment was conducted in an organic production system in the North Eastern Himalayan foothills of India for 3 consecutive years by evaluating high-yielding varieties (HYVs) of different millets, viz., finger millet, foxtail millet, little millet, barnyard millet, proso millet, and browntop millet, along with local landraces of finger millets (Sikkim-1 and Sikkim-2; Nagaland-1 and Nagaland-2) to identify stable, high-yielding, and nutritionally superior genotypes suited for the region. Results: Among the various millets, finger millet, followed by little millet and foxtail millet, proved their superiority in terms of productivity (ranging between 1.16 and 1.43 Mg ha-1) compared to other millets. Among different varieties of finger millets, cv. VL Mandua 352 recorded the highest average grain yield (1.43 Mg ha-1) followed by local landraces, Nagaland-2 (1.31 Mg ha-1) and Sikkim-1 (1.25 Mg ha-1). Root traits such as total root length, root volume, average diameter of roots, and root surface area were significantly higher in finger millet landraces Nagaland-1, Nagaland-2, and Sikkim-1 compared to the rest of the millet genotypes. The different millets were found to be rich sources of protein as recorded in foxtail millet cv. SiA 3088 (12.3%), proso millet cv. TNAU 145 (11.5%), and finger millet landraces, Sikkim-1 and Nagaland-2 (8.7% each). Finger millet landrace Sikkim-2 recorded the highest omega-6 content (1.16%), followed by barnyard millet cv. VL 207 (1.09%). Barnyard millet cv. VL 207 recorded the highest polyunsaturated fatty acid (PUFA) content (1.23%), followed by foxtail millet cv. SiA 3088 (1.09%). The local finger millet landraces Sikkim-1 and Sikkim-2 recorded the highest levels of histidine (0.41%) and tryptophan (0.12%), respectively. Sikkim-1 and Nagaland-2 recorded the highest level of thiamine (0.32%) compared to the HYVs. Conclusion: These findings indicate that finger millet has great potential in the organic production system of the North Eastern Himalayan Region (NEHR) of India, and apart from HYVs like VL Mandua 352, local landraces, viz., Nagaland-2 and Sikkim-1, should also be promoted for ensuring food and nutritional security in this fragile ecosystem.
RESUMO
Recent lifestyle changes have resulted in tremendous peer pressure and mental stress, and increased the incidences of chronic psychological disorders; like addiction, depression and anxiety (ADA). In this context, the stress-tolerance levels vary amongst individuals and genetic factors play prominent roles. Vulnerable individuals may often be drawn towards drug-addiction to combat stress. This systematic review critically appraises the relationship of various genetic factors linked with the incidences of ADA development. For coherence, we focused solely on cocaine as a substance of abuse in this study. Online scholarly databases were used to screen pertinent literature using apt keywords; and the final retrieval included 42 primary-research articles. The major conclusion drawn from this systematic analysis states that there are 51 genes linked with the development of ADA; and 3 (BDNF, PERIOD2 and SLC6A4) of them are common to all the three aspects of ADA. Further, inter-connectivity analyses of the 51 genes further endorsed the central presence of BDNF and SLC6A4 genes in the development of ADA disorders. The conclusions derived from this systematic study pave the way for future studies for the identification of diagnostic biomarkers and drug targets; and for the development of novel and effective therapeutic regimens against ADA.
Assuntos
Transtornos Relacionados ao Uso de Cocaína , Cocaína , Humanos , Transtornos Relacionados ao Uso de Cocaína/genética , Depressão/genética , Fator Neurotrófico Derivado do Encéfalo/genética , Ansiedade/genética , Transtornos de Ansiedade , Proteínas da Membrana Plasmática de Transporte de SerotoninaRESUMO
The extensive usage of iron oxide nanoparticles (FeO NPs) in commercial and biomedical applications raises the risk of releasing their remains into the aquatic ecosystems and this could possibly cause cytotoxic effects on aquatic organisms. Thus, the toxicity assessment of FeO NPs on cyanobacteria, which are primary producers at the bottom of food chain in aquatic ecosystems, is essential to gain information about the potential ecotoxicological threat on aquatic biota. The present study investigated the cytotoxic effects of FeO NPs on Nostoc ellipsosporum using different concentrations (0, 10, 25, 50 and 100 mg L-1) to track the time-dependent and dose-dependent effects and compared with its bulk equivalent. In addition, the impacts of FeO NPs and bulk counterpart on cyanobacterial cells were assessed under nitrogen as well as nitrogen-deficient conditions, because of ecological role of cyanobacteria in nitrogen fixation. The study revealed that the highest protein content was observed in the control in both types of BG-11 media compared to treatments of nano and bulk particles of Fe2O3. A 23% reduction in protein in nanoparticle treatment and a 14% reduction in bulk treatment at 100 mg L-1 was observed in BG-11 medium. At same concentration, in BG-110 media, this decline was even more intense with 54% reduction in nanoparticle and a 26% reduction in bulk. Catalytic activity of catalase and superoxide dismutase was found to be linearly correlated with the dose concentration for nano and bulk form in BG-11 as well as BG-110 media. The increased levels of lactate dehydrogenase act as biomarker of the cytotoxicity brought on by nanoparticles. Optical, scanning electron, and transmission electron microscopy all demonstrated the cell entrapment, nanoparticle deposition on the cell surface, cell wall collapse and membrane degradation. A cause for concern is that nanoform was found to be more hazardous than bulk form.
Assuntos
Nanopartículas Metálicas , Nanopartículas , Nostoc , Ecossistema , Nanopartículas/toxicidade , Proteínas , Água Doce , Nitrogênio , Nanopartículas Magnéticas de Óxido de FerroRESUMO
Production of phosphorus efficient genotypes in groundnut can improve and also reduces environmental pollution. Identification of P-efficient groundnut genotypes is a need of the hour to sustain in P-deficient soils. The pot experiment showed significant differences between genotypes (G) and treatments (T) for all the traits and G × T interaction for majority of traits. The G × T × Y interaction effects were also significant for all the traits except leaf P% (LP%), leaf acid phosphatase (LAP) and root dry weight (RDW). In lysimeter experiment, the effect of G, T and G × T were significant for leaf dry weight (LDW), stem dry weight (SDW), total transpiration (TT) and transpiration efficiency (TE). For traits, LDW, SDW, TT, TE, ICGV 00351 and ICGS 76; for SDW, TT, ICGV 02266 are best performers under both P-sufficient and deficient conditions. Based on P-efficiency indices and surrogate traits of P-uptake, ICGV's 02266, 05155, 00308, 06040 and 06146 were considered as efficient P-responding genotypes. From GGE biplot, ICGV 06146 under P-deficient and TAG 24 under both P-sufficient and deficient conditions are portrayed as best performer. ICGV 06146 was identified as stable pod yielder and a promising genotype for P-deficient soils. The genotypes identified in this study can be used as a parent in developing mapping population to decipher the genetics and to devleop groundnut breeding lines suitable to P-deficient soils.
Assuntos
Arachis , Fósforo , Arachis/genética , Melhoramento Vegetal , Fenótipo , SoloRESUMO
BACKGROUND: In India, raw peanuts are obtained by aggregators from smallholder farms in the form of whole pods and the price is based on a manual estimation of basic peanut pod and kernel characteristics. These methods of raw produce evaluation are slow and can result in procurement irregularities. The procurement delays combined with the lack of storage facilities lead to fungal contaminations and pose a serious threat to food safety in many regions. To address this gap, we investigated whether X-ray technology could be used for the rapid assessment of the key peanut qualities that are important for price estimation. RESULTS: We generated 1752 individual peanut pod 2D X-ray projections using a computed tomography (CT) system (CTportable160.90). Out of these projections we predicted the kernel weight and shell weight, which are important indicators of the produce price. Two methods for the feature prediction were tested: (i) X-ray image transformation (XRT) and (ii) a trained convolutional neural network (CNN). The prediction power of these methods was tested against the gravimetric measurements of kernel weight and shell weight in diverse peanut pod varieties1. Both methods predicted the kernel mass with R2 > 0.93 (XRT: R2 = 0.93 and mean error estimate (MAE) = 0.17, CNN: R2 = 0.95 and MAE = 0.14). While the shell weight was predicted more accurately by CNN (R2 = 0.91, MAE = 0.09) compared to XRT (R2 = 0.78; MAE = 0.08). CONCLUSION: Our study demonstrated that the X-ray based system is a relevant technology option for the estimation of key peanut produce indicators (Figure 1). The obtained results justify further research to adapt the existing X-ray system for the rapid, accurate and objective peanut procurement process. Fast and accurate estimates of produce value are a necessary pre-requisite to avoid post-harvest losses due to fungal contamination and, at the same time, allow the fair payment to farmers. Additionally, the same technology could also assist crop improvement programs in selecting and developing peanut cultivars with enhanced economic value in a high-throughput manner by skipping the shelling of the pods completely. This study demonstrated the technical feasibility of the approach and is a first step to realize a technology-driven peanut production system transformation of the future.
RESUMO
Achieving global goals for sustainable nutrition, health, and wellbeing will depend on delivering enhanced diets to humankind. This will require instantaneous access to information on food-source quality at key points of agri-food systems. Although laboratory analysis and benchtop NIR spectrometers are regularly used to quantify grain quality, these do not suit all end users, for example, stakeholders in decentralized agri-food chains that are typical in emerging economies. Therefore, we explored benchtop and portable NIR instruments, and the methods that might aid these particular end uses. For this purpose, we generated NIR spectra for 328 grain samples from multiple cereals (finger millet, foxtail millet, maize, pearl millet, and sorghum) with a standard benchtop NIR spectrometer (DS2500, FOSS) and a novel portable NIR-based instrument (HL-EVT5, Hone). We explored classical deterministic methods (via winISI, FOSS), novel machine learning (ML)-driven methods (via Hone Create, Hone), and a convolutional neural network (CNN)-based method for building the calibrations to predict grain protein out of the NIR spectra. All of the tested methods enabled us to build relevant calibrations out of both types of spectra (i.e., R2 ≥ 0.90, RMSE ≤ 0.91, RPD ≥ 3.08). Generally, the calibration methods integrating the ML techniques tended to enhance the prediction capacity of the model. We also documented that the prediction of grain protein content based on the NIR spectra generated using the novel portable instrument (HL-EVT5, Hone) was highly relevant for quantitative protein predictions (R2 = 0.91, RMSE = 0.97, RPD = 3.48). Thus, the presented findings lay the foundations for the expanded use of NIR spectroscopy in agricultural research, development, and trade.
Assuntos
Proteínas de Grãos , Agricultura , Calibragem , Grão Comestível , Espectroscopia de Luz Próxima ao Infravermelho/métodosRESUMO
Pearl millet [Pennisetum glaucum (L.) R. Br.] is a C4 crop cultivated for its grain and stover in crop-livestock-based rain-fed farming systems of tropics and subtropics in the Indian subcontinent and sub-Saharan Africa. The intensity of drought is predicted to further exacerbate because of looming climate change, necessitating greater focus on pearl millet breeding for drought tolerance. The nature of drought in different target populations of pearl millet-growing environments (TPEs) is highly variable in its timing, intensity, and duration. Pearl millet response to drought in various growth stages has been studied comprehensively. Dissection of drought tolerance physiology and phenology has helped in understanding the yield formation process under drought conditions. The overall understanding of TPEs and differential sensitivity of various growth stages to water stress helped to identify target traits for manipulation through breeding for drought tolerance. Recent advancement in high-throughput phenotyping platforms has made it more realistic to screen large populations/germplasm for drought-adaptive traits. The role of adapted germplasm has been emphasized for drought breeding, as the measured performance under drought stress is largely an outcome of adaptation to stress environments. Hybridization of adapted landraces with selected elite genetic material has been stated to amalgamate adaptation and productivity. Substantial progress has been made in the development of genomic resources that have been used to explore genetic diversity, linkage mapping (QTLs), marker-trait association (MTA), and genomic selection (GS) in pearl millet. High-throughput genotyping (HTPG) platforms are now available at a low cost, offering enormous opportunities to apply markers assisted selection (MAS) in conventional breeding programs targeting drought tolerance. Next-generation sequencing (NGS) technology, micro-environmental modeling, and pearl millet whole genome re-sequence information covering circa 1,000 wild and cultivated accessions have helped to greater understand germplasm, genomes, candidate genes, and markers. Their application in molecular breeding would lead to the development of high-yielding and drought-tolerant pearl millet cultivars. This review examines how the strategic use of genetic resources, modern genomics, molecular biology, and shuttle breeding can further enhance the development and delivery of drought-tolerant cultivars.
RESUMO
This study tested whether machine learning (ML) methods can effectively separate individual plants from complex 3D canopy laser scans as a prerequisite to analyzing particular plant features. For this, we scanned mung bean and chickpea crops with PlantEye (R) laser scanners. Firstly, we segmented the crop canopies from the background in 3D space using the Region Growing Segmentation algorithm. Then, Convolutional Neural Network (CNN) based ML algorithms were fine-tuned for plant counting. Application of the CNN-based (Convolutional Neural Network) processing architecture was possible only after we reduced the dimensionality of the data to 2D. This allowed for the identification of individual plants and their counting with an accuracy of 93.18% and 92.87% for mung bean and chickpea plants, respectively. These steps were connected to the phenotyping pipeline, which can now replace manual counting operations that are inefficient, costly, and error-prone. The use of CNN in this study was innovatively solved with dimensionality reduction, addition of height information as color, and consequent application of a 2D CNN-based approach. We found there to be a wide gap in the use of ML on 3D information. This gap will have to be addressed, especially for more complex plant feature extractions, which we intend to implement through further research.
Assuntos
Algoritmos , Aprendizado de Máquina , Redes Neurais de ComputaçãoRESUMO
We have previously reported that there is a tight link between high transpiration efficiency (TE; shoot biomass per unit water transpired) and restriction of transpiration under high vapor pressure deficit (VPD). In this study, we examine other factors affecting TE among major C4 cereals, namely species' differences, soil type, and source-sink relationships. We found that TE in maize (10 genotypes) was higher overall than in pearl millet (10 genotypes), and somewhat higher than in sorghum (16 genotypes). Overall, transpiration efficiency was higher in high-clay than in sandy soil under high VPD, but the effect was species-dependent with maize showing large variations in TE and yield across different soil types whilst pearl millet showed no variation in TE. This suggested that species fitness was specific to soil type. Removal of cobs drastically decreased TE in maize under high VPD, but removal of panicles did not have the same effect in pearl millet, suggesting that source-sink balance also drove variations in TE. We interpret the differences in TE between species as being accounted for by differences in the capacity to restrict transpiration under high VPD, with breeding history possibly having favored the source-sink balance in maize. This suggests that there is also scope to increase TE in pearl millet and sorghum through breeding. With regards to soil conditions, our results indicate that it appears to be critical to consider hydraulic characteristics and the root system together in order to better understand stomatal regulation and restriction of transpiration under high VPD. Finally, our results highlight the importance of sink strength in regulating transpiration/photosynthesis, and hence in influencing TE.
Assuntos
Pennisetum , Transpiração Vegetal , Grão Comestível , Melhoramento Vegetal , Pressão de VaporRESUMO
This study compared maize, sorghum and pearl-millet, leading C4 cereals, for the transpiration rate (TR) response to increasing atmospheric and soil water stress. The TR response to transiently increasing VPD (0.9-4.1â¯kPa) and the transpiration and leaf area expansion response to progressive soil drying were measured in controlled conditions at early vegetative stage in 10-16 genotypes of each species grown in moderate or high vapor pressure deficit (VPD) conditions. Maize grown under moderate VPD conditions restricted TR under high VPD, but not sorghum and pearl millet. By contrast, when grown under high VPD, all species increased TR upon increasing VPD, suggesting a loss of TR responsiveness. Sorghum and pearl-millet grown under high VPD reduced leaf area, but not maize. Upon progressive soil drying, maize reduced transpiration at higher soil moisture than sorghum and pearl millet, especially under high VPD, and leaf area expansion declined at similar or lower soil moisture than transpiration in maize and sorghum. It is concluded that maize conserves water by restricting transpiration upon increasing VPD and under higher soil moisture than sorghum and millet, giving maize significantly higher TE, whereas sorghum and pearl millet rely mostly on reduced leaf area and somewhat on transpiration restriction.
Assuntos
Adaptação Fisiológica , Mudança Climática , Desidratação , Pennisetum/fisiologia , Sorghum/fisiologia , Zea mays/fisiologia , Transpiração Vegetal , Especificidade da EspécieRESUMO
AIM: To investigate by the finite element analysis comparison of stress distribution on the cortical and cancellous bone in an implant-supported yttrium tetragonal zirconia polycrystals (Y-TZP FPD) in four different widely used implant systems under different loading conditions. MATERIALS AND METHODS: Four 3-D finite element analysis (FEA) models of mandible having different implant systems with dimensions 8.0 mm × 5 mm in the second premolar and molar region were developed. In these models, abutment was tightened and 3-unit implant-supported Y-TZP FPD were cemented. A lateral force component of 100 N at 30° to the occlusal plane and a vertical intrusive force component of 250 N were applied to the central fossa of the FDP and the stress on bone around the implant was analyzed by FEA. RESULTS: In the four implant systems, the maximum stress values on the crestal bone differ for the different implant systems for the two loading conditions applied. In both cases, the maximum stress values on the cortical bone were in ADIN Touareg Closefit WP implants and the maximum stress on the cancellous bone was observed in the Nobel Speedy Groovy implants. CONCLUSION: The ADIN Touareg Closefit WP implant system induced maximum stress on the crestal bone in both axial and buccolingual loading. Nobel Speedy Groovy implant system favored more equitable load distribution to the peri-implant crestal bone when compared to the other three implant systems. CLINICAL SIGNIFICANCE: From this study, it was found that out of all the implants used for the study, the Nobel Speedy Groovy implant system favored more equitable load distribution due to the platform switch design contrary to the other systems and at the cancellous bone the least load was transferred by the Nobel Active implants due to the reverse buttress thread design and larger thread pitch.
Assuntos
Implantes Dentários , Fenômenos Biomecânicos , Simulação por Computador , Planejamento de Prótese Dentária , Prótese Dentária Fixada por Implante , Análise do Estresse Dentário , Análise de Elementos Finitos , Estresse MecânicoRESUMO
AIM: To compare the vertical margin accuracy of lost wax castings produced by the conventional casting technique with all metal (WIRONIUM®) and PFM alloy (WIRON®99) using a metal ring and ringless system. MATERIALS AND METHODS: A brass die assembly was used to fabricate standardized wax pattern crowns. A total of 100 wax patterns were made with both ringless and metal ring investment systems. Wax patterns were readapted and refined on the master die and divided into two groups, namely, group I and group II with 50 wax patterns in each group. Group I (ringless system) and group II (metal ring system) were further divided into subgroups having a sample size of 25 in each group. Each coping was invested and cast individually. The marginal discrepancy between the metal die and the castings were measured by a stereomicroscope and AutoCAD software 2013. Measurement was made on the facial area of the metal die. RESULTS: The resultant casts obtained from different casting systems show statistically significant difference found between the marginal discrepancies using metal ring and ringless castings system, and statistically nonsignificant difference was found between the marginal discrepancies using all metal alloy (WIRONIUM®) and PFM alloy (WIRON®99) within the same group. CONCLUSION: The marginal discrepancy for castings made with ringless casting system was less when compared to metal ring casting system, and there was no difference in marginal discrepancy when compared to all metal alloy (WIRONIUM®) and PFM alloy (WIRON®99) within the same group. CLINICAL SIGNIFICANCE: Marginal fit is influenced by several factors including type of crown, tooth preparation geometry, dimensional accuracy of impression materials, factors related to dental casting, type of cement, luting pressure, duration of cementation, and use of occlusal vents or die spacers.
Assuntos
Coroas , Técnica de Fundição Odontológica , Cimentação , Cimentos Dentários , Materiais para Moldagem Odontológica , Adaptação Marginal Dentária , Planejamento de Prótese DentáriaRESUMO
AIM: The aim of this study is to check the dimensional precision of stone models made by two different brands of polyvinyl siloxane impression materials using the monophase, one-step, and two-step putty/light-body impression techniques. MATERIALS AND METHODS: A metal model, having two crown preparations, was fabricated. With each technique, 40 impressions were made using two types of polyvinyl siloxane impression materials (Aquasil and Virtual). A total of 240 impressions were made with both the polyvinyl siloxane impression materials. Monophase impressions were made with a medium body using an acrylic custom tray. By simultaneous usage of putty and light-body, one-step impressions were made with a perforated metal stock tray. For two-step impressions, a 25-40 microns thick cellophane sheet spacer was used. The stone casts were obtained from the impressions of the stainless steel model. Three different dimensions (height, diameter, and inter-abutment distance) on these resultant stone casts were compared with the standard die. The accuracy of two different brands of impression materials was also compared. The results were then statistically analyzed. RESULTS: The resultant casts obtained from the different impression techniques had significantly larger dimensions in height and diameter, but smaller dimensions were observed for the inter-abutment distance. Larger deviation in resultant casts was observed in the monophase than one-step impression technique and the least deviation was observed in the two-step impression technique. CONCLUSION: The two-step impression technique produced the most accurate results in terms of the resultant casts. Out of the two different brands, Aquasil produced more fare results. CLINICAL SIGNIFICANCE: Adequate marginal adaptation, proper fit and least distortion of the castings, and the final prosthesis can be achieved by using the adequate impression technique and impression material.
Assuntos
Técnica de Moldagem Odontológica , Modelos Dentários , Materiais para Moldagem Odontológica , Teste de Materiais , Polivinil , Siloxanas , Propriedades de SuperfícieRESUMO
AIM: Proper stress distribution on dental implants is necessary in bar-retained implant overlay dentures. The purpose of the study is to comparatively assess the stress distribution pattern on the crestal bone at the bone-implant interface due to different bar heights using finite element models (FEMs). MATERIALS AND METHODS: Eight 3D FEMs were developed from mandibular overdentures with two implants in the canine region separated by a distance of 20 mm. In these models, four different bar heights from the mucosa (0.5, 1, 1.5, and 2 mm) with 12 mm occlusal plane height were analyzed. A unilateral and a bilateral vertical load of 150 N were applied to the central occlusal fossa of the first molar and the stress of bone around the implant was analyzed by finite element analysis (FEA). RESULTS: By increasing the bar height, the maximum stress values around implants on the crestal bone were found to be increased in unilateral and bilateral loading models. In unilateral loading models, the maximum stress was found in a model with a 2 mm bar height (0.46 MPa) on the distal side of the ipsilateral implant, and in bilateral loading cases, the maximum stress was also found in a model with a 2 mm bar height (0.456 MPa). CONCLUSION: As the vertical cantilever increases (here the bar height), the maximum stress on the crestal bone increases. A minimum of 0.5 mm of space is sufficient between the mucosa and the inferior border of the bar to maintain oral hygiene. CLINICAL SIGNIFICANCE: From the present study, it can be concluded that an increase in bar height causes an increase in stress levels on the peri-implant crestal bone.