Properties of Coatings Based on Calcium Phosphate and Their Effect on Cytocompatibility and Bioactivity of Titanium Nickelide.

Coatings based on calcium phosphate with thicknesses of 0.5 and 2 µm were obtained by high-frequency magnetron sputtering on NiTi substrates in an argon atmosphere. The coating was characterized using X-ray diffraction, scanning electron microscopy, atomic force microscopy, and in vitro cytocompatibility and bioactivity studies. A biphasic coating of tricalcium phosphate (Ca3(PO4)2) and hydroxyapatite (Ca10(PO4)6(OH)2) with a 100% degree of crystallinity was formed on the surface. The layer enriched in calcium, phosphorus, and oxygen was observed using scanning electron microscopy and energy-dispersive X-ray spectroscopy. Scanning electron microscopy showed that the surface structure is homogeneous without visible defects. The 2 µm thick coating obtained by sputtering with a deposition time of 4 h and a deposition rate of 0.43 µm/h is uniform, contains the highest amount of the calcium phosphate phase, and is most suitable for the faster growth of cells and accelerated formation of apatite layers. Samples with calcium phosphate coatings do not cause hemolysis and have a low cytotoxicity index. The results of immersion in a solution simulating body fluid show that NiTi with the biphasic coating promotes apatite growth, which is beneficial for biological activity.

Thickness Effects on the Martensite Transformations and Mechanical Properties of Nanocrystalline NiTi Wires.

This paper studied the features of the martensitic transformations and mechanical properties of 40, 60, and 90 µm thick NiTi wires with nanocrystalline B2 structures. It was established that the wires were composites and consisted of a TiNi matrix and a TiO2 + TiNi3 surface layer. Structural methods showed that the wire matrix was formed by grains of up to 20 nm in size. The method of measuring the electrical resistivity during cooling and heating revealed a two-stage nature of the martensitic transformation. Cyclic loading-unloading demonstrated that all the samples exhibited superelasticity effects and completely restored their shape when unloaded from a 4-8% relative strain at room temperature. An increase in mechanical characteristics with respect to the wire thickness was experimentally established. This was due to the change in the composition of the TiNi matrix during drawing.

Phase Composition, Microstructure, Multiple Shape Memory Effect of TiNi50-xVx (x = 1; 2; 4 at.%) System Alloys.

The phase composition, microstructure, and multiple shape memory effect of TiNi50-xVx alloys were studied in this work. The phase composition of the TiNi50-xVx system is the TiNi matrix, spherical particles of TiNiV, the secondary phase Ti2Ni(V). Doping of TiNi alloys with vanadium atoms leads to an increase in the stability of high-temperature B2 and rhombohedral R-phases. An increase in the atomic volume with an increase in the concentration of the alloying element V from 1 to 4 at.% was established. Vanadium doping of the Ti-Ni-V system alloys leads to an increase in the temperature interval for the manifestation of the multiple shape memory effect. It has been established that the value of the reversible deformation of the multiple shape memory effect both during heating and during cooling increases linearly from 2 to 4% with an increase in the vanadium concentration.

Adhesion, proliferation, and osteogenic differentiation of human mesenchymal stem cells on additively manufactured Ti6Al4V alloy scaffolds modified with calcium phosphate nanoparticles.

In the present study, biocomposites based on 3D porous additively manufactured Ti6Al4V (Ti64) scaffolds modified with biocompatible calcium phosphate nanoparticles (CaPNPs) were investigated. Ti64 scaffolds were manufactured via electron beam melting technology using an Arcam machine. Electrophoretic deposition was used to modify the scaffolds with CaPNPs, which were synthesized by precipitation in the presence of polyethyleneimine (PEI). Dynamic light scattering revealed that the CaP/PEI nanoparticles had an average size of 46 ± 18 nm and a zeta potential of +22 ± 9 mV. Scanning electron microscopy (SEM) revealed that the obtained spherical CaPNPs had an average diameter of approximately 90 nm. The titanium-based scaffolds coated with CaPNPs exhibited improved hydrophilic surface properties, with a water contact angle below 5°. Cultivation of human mesenchymal stem cells (hMSCs) on the CaPNPs-coated Ti64 scaffolds indicated that the improved hydrophilicity was beneficial for the attachment and growth of cells in vitro. The Ti6Al4V/CaPNPs scaffold supported an increase in the alkaline phosphatase (ALP) activity of cells. In addition to the favourable cell proliferation and differentiation, Ti6Al4V/CaPNPs scaffolds displayed increased mineralization compared to non-coated Ti6Al4V scaffolds. Thus, the developed composite 3D scaffolds of Ti6Al4V functionalized with CaPNPs are promising materials for different applications related to bone repair.

Functionalization of titania nanotubes with electrophoretically deposited silver and calcium phosphate nanoparticles: Structure, composition and antibacterial assay.

Herein TiO2 nanotubes (NTs) were fabricated via electrochemical anodization and coated with silver and calcium phosphate (CaP) nanoparticles (NPs) by electrophoretic deposition. Scanning electron microscopy (SEM) and energy-dispersive X-ray spectroscopy (EDX) revealed that Ag and CaP NPs were successfully deposited onto the TiO2 NTs. Using X-ray diffraction, only anatase and Ti were observed after deposition of Ag and CaP NPs. However, X-ray photoelectron spectroscopy (XPS) analysis revealed that the binding energy (BE) of the Ag and CaP NP core levels corresponded to metallic Ag, hydroxyapatite and amorphous calcium phosphate, based on the knowledge that CaP NPs synthesized by precipitation have the nanocrystalline structure of hydroxyapatite. The application of Ag NPs allows for decreasing the water contact angle and thus increasing the surface free energy. It was concluded that the CaP NP surfaces are superhydrophilic. A significant antimicrobial effect was observed on the TiO2 NT surface after the application of Ag NPs and/or CaP NPs compared with that of the pure TiO2 NTs. Thus, fabrication of TiO2 NTs, Ag NPs and CaP NPs with PEI is promising for diverse biomedical applications, such as in constructing a biocompatible coating on the surface of Ti that includes an antimicrobial effect.

Securinine Derivatives as Potential Anti-amyloid Therapeutic Approach.

BACKGROUND: Oxidative stress and amyloid deposition are tightly interconnected pathological features of Alzheimer disease. In this respect, both amyloid production and aggregation may be stimulated by oxidative stress and also the increase of pathogenic ß-amyloid and its aggregated form lead to oxidative stress progression. Therefore, the search for potential drugs with both antioxidant and antiaggregation properties are of great interest. METHODS: In this study, we described the stereospecific synthesis of alkaloid securinine aminoderivatives. RESULTS: We showed that the newly synthesized compounds possess antioxidant and metal-chelating properties. Indeed, we report that one compound has inhibitory effects towards µ-amyloid aggregation. CONCLUSION: Based on these results, aminoderivatives of securinine scaffold are promising compounds for development of new drugs for the treatment of neurodegenerative diseases.

Neuroprotective Effects of the Securinine-Analogues: Identification of Allomargaritarine as a Lead Compound.

Oxidative stress and mitochondrial disturbances are the common and important causative factors of aging, and play an important role in the late onset of sporadic neurodegenerative diseases, including Alzheimer disease (AD). Furthermore, emerging evidence from in vitro and in vivo disease models suggests that oxidative stress and increased vulnerability to induction of mitochondrial permeability transition leads to the pathogenesis of the neurological disorders. Towards the goals of developing effective neuroprotectors, this article describes the synthesis and neuroprotective studies of various derivatives of the naturally occurring alkaloid securinine, based on which a lead compound, allomargaritarine (a diastereomer of margaritarine), was identified as an effective therapeutic for neuroprotection. Allomargaritarine exhibits high antioxidant activity, and has significant mitoprotective effect on cellular models of neurodegeneration.