In Vitro Models of Bacterial Biofilms: Innovative Tools to Improve Understanding and Treatment of Infections.

Bacterial infections are a growing concern to the health care systems. Bacteria in the human body are often found embedded in a dense 3D structure, the biofilm, which makes their eradication even more challenging. Indeed, bacteria in biofilm are protected from external hazards and are more prone to develop antibiotic resistance. Moreover, biofilms are highly heterogeneous, with properties dependent on the bacteria species, the anatomic localization, and the nutrient/flow conditions. Therefore, antibiotic screening and testing would strongly benefit from reliable in vitro models of bacterial biofilms. This review article summarizes the main features of biofilms, with particular focus on parameters affecting biofilm composition and mechanical properties. Moreover, a thorough overview of the in vitro biofilm models recently developed is presented, focusing on both traditional and advanced approaches. Static, dynamic, and microcosm models are described, and their main features, advantages, and disadvantages are compared and discussed.

3D bioprinting for orthopaedic applications: Current advances, challenges and regulatory considerations.

In the era of personalised medicine, novel therapeutic approaches raise increasing hopes to address currently unmet medical needs by developing patient-customised treatments. Three-dimensional (3D) bioprinting is rapidly evolving and has the potential to obtain personalised tissue constructs and overcome some limitations of standard tissue engineering approaches. Bioprinting could support a wide range of biomedical applications, such as drug testing, tissue repair or organ transplantation. There is a growing interest for 3D bioprinting in the orthopaedic field, with remarkable scientific and technical advances. However, the full exploitation of 3D bioprinting in medical applications still requires efforts to anticipate the upcoming challenges in translating bioprinted products from bench to bedside. In this review we summarised current trends, advances and challenges in the application of 3D bioprinting for bone and cartilage tissue engineering. Moreover, we provided a detailed analysis of the applicable regulations through the 3D bioprinting process and an overview of available standards covering bioprinting and additive manufacturing.

Alternating block copolymer-based nanoparticles as tools to modulate the loading of multiple chemotherapeutics and imaging probes.

Cancer therapy often relies on the combined action of different molecules to overcome drug resistance and enhance patient outcome. Combined strategies relying on molecules with different pharmacokinetics often fail due to the lack of concomitant tumor accumulation and, thus, to the loss of synergistic effect. Due to their ability to enhance treatment efficiency, improve drug pharmacokinetics, and reduce adverse effects, polymer nanoparticles (PNPs) have been widely investigated as co-delivery vehicles for cancer therapies. However, co-encapsulation of different drugs and probes in PNPs requires a flexible polymer platform and a tailored particle design, in which both the bulk and surface properties of the carriers are carefully controlled. In this work, we propose a core-shell PNP design based on a polyurethane (PUR) core and a phospholipid external surface. The modulation of the hydrophilic/hydrophobic balance of the PUR core enhanced the encapsulation of two chemotherapeutics with dramatically different water solubility (Doxorubicin hydrochloride, DOXO and Docetaxel, DCTXL) and of Iron Oxide Nanoparticles for MRI imaging. The outer shell remained unchanged among the platforms, resulting in un-modified cellular uptake and in vivo biodistribution. We demonstrate that the choice of PUR core allowed a high entrapment efficiency of all drugs, superior or comparable to previously reported results, and that higher core hydrophilicity enhances the loading efficiency of the hydrophilic DOXO and the MRI contrast effect. Moreover, we show that changing the PUR core did not alter the surface properties of the carriers, since all particles showed a similar behavior in terms of cell internalization and in vivo biodistribution. We also show that PUR PNPs have high passive tumor accumulation and that they can efficient co-deliver the two drugs to the tumor, reaching an 11-fold higher DOXO/DCTXL ratio in tumor as compared to free drugs. STATEMENT OF SIGNIFICANCE: Exploiting the synergistic action of multiple chemotherapeutics is a promising strategy to improve the outcome of cancer patients, as different agents can simultaneously engage different features of tumor cells and/or their microenvironment. Unfortunately, the choice is limited to drugs with similar pharmacokinetics that can concomitantly accumulate in tumors. To expand the spectrum of agents that can be delivered in combination, we propose a multi-compartmental core-shell nanoparticles approach, in which the core is made of biomaterials with high affinity for drugs of different physical properties. We successfully co-encapsulated Doxorubicin Hydrochloride, Docetaxel, and contrast agents and achieved a significantly higher concomitant accumulation in tumor versus free drugs, demonstrating that nanoparticles can improve synergistic cancer chemotherapy.

Influence of Drug-Carrier Polymers on Alpha-Synucleinopathies: A Neglected Aspect in New Therapies Development.

Current therapeutic strategies to treat neurodegenerative diseases, such as alpha-synucleinopathies, aim at enhancing the amount of drug reaching the brain. Methods proposed, such as intranasal administration, should be able to bypass the blood brain barrier (BBB) and even when directly intracerebrally injected they could require a carrier to enhance local release of drugs. We have investigated the effect of a model synthetic hydrogel to be used as drug carrier on the amount of alpha-synuclein aggregates in cells in culture. The results indicated that alpha-synuclein aggregation was affected by the synthetic polymer, suggesting the need for testing the effect of any used material on the pathological process before its application as drug carrier.

In vitro evaluation of gelatin and chitosan electrospun fibres as an artificial guide in peripheral nerve repair: a comparative study.

Random and aligned gelatin (GL) and chitosan (CS) nano-fibres have been prepared by electrospinning tuning the collector rotation speed. The effect of fibre alignment on cell adhesion and proliferation was assessed in vitro by using different Schwann cell (SC) and neuronal models. Moreover, actin cytoskeleton organization, lamellipodia and filipodia formation, and axon outgrowth were evaluated. GL and CS fibres induced similar adhesion and proliferation rates. GL and CS random fibres promoted higher adhesion and proliferation rates induction in comparison to the aligned ones, although GL and CS fibres alignment resulted in SC and axon-oriented growth. Filipodia formation was higher on aligned fibres, suggesting that these substrates can promote higher cell migration in comparison to random ones. 50B11 (neuronal cell line) differentiation was higher on GL fibres, whereas no differences were observed in dorsal root ganglia explants model. These data suggest that both GL and CS fibres can be promising substrates to be used in peripheral nerve reconstruction. Copyright © 2016 John Wiley & Sons, Ltd.

Stem cells to restore insulin production and cure diabetes.

BACKGROUND: The advancement of knowledge in the field of regenerative medicine is increasing the therapeutic expectations of patients and clinicians on cell therapy approaches. Within these, stem cell therapies are often evoked as a possible therapeutic option for diabetes, already ongoing or possible in the near future. AIM: The purpose of this document is to make a point of the situation on existing knowledge and therapies with stem cells to treat patients with diabetes by focusing on some of the aspects that most frequently raise curiosity and discussion in clinical practice and in the interaction with the patient. In fact, at present there are no clinically approved treatments based on the use of stem cells for the treatment of diabetes, but several therapeutic approaches have already been evaluated or are being evaluated in clinical trials. DATA SYNTHESIS: It is possible to identify three large potential application fields: 1) the reconstruction of the ß cell mass; 2) the immunomodulation in type 1 diabetes (T1D); 3) the treatment of complications. In this study we will limit the discussion to approaches that have the potential for clinical translation, deliberately omitting aspects of basic biology and preclinical data. Also, we intentionally omit the treatment of the complications that will be the subject of a future document. Finally, an overview of the Italian situation regarding the storage of cord blood cells for the therapy of diabetes will be given.

Development and characterization of novel agar and gelatin injectable hydrogel as filler for peripheral nerve guidance channels.

Injectable hydrogels are becoming of increasing interest in the field of tissue engineering thanks to their versatile properties and to the possibility of being injected into tissues or devices during surgery. In peripheral nerve tissue engineering, injectable hydrogels having shear-thinning properties are advantageous as filler of nerve guidance channels (NGCs) to improve the regeneration process. In the present work, gelatin-based hydrogels were developed and specifically designed for the insertion into the lumen of hollow NGCs through a syringe during surgery. Injectable hydrogels were obtained using an agar-gelatin 20:80 weight ratio, (wt/wt) blend crosslinked by the addition of genipin (A/GL_GP). The physicochemical properties of the A/GL_GP hydrogels were analysed, including their injectability, rheological, swelling and dissolution behaviour, and their mechanical properties under compression. The hydrogel developed showed shear-thinning properties and was applied as filler of NGCs. The A/GL_GP hydrogel was tested in vitro using different cell lines, among them Schwann cells which have been used because they have an important role in peripheral nerve regeneration. Viability assays demonstrated the lack of cytotoxicity. In vitro experiments showed that the hydrogel is able to promote cell adhesion and proliferation. Two- and three-dimensional migration assays confirmed the capability of the cells to migrate both on the surface and within the internal framework of the hydrogel. These data show that A/GL_GP hydrogel has characteristics that make it a promising scaffold material for tissue engineering and nerve regeneration. Copyright © 2014 John Wiley & Sons, Ltd.

Gelatin-based hydrogel for vascular endothelial growth factor release in peripheral nerve tissue engineering.

Hydrogels are promising materials in regenerative medicine applications, due to their hydrophilicity, biocompatibility and capacity to release drugs and growth factors in a controlled manner. In this study, biocompatible and biodegradable hydrogels based on blends of natural polymers were used in in vitro and ex vivo experiments as a tool for VEGF-controlled release to accelerate the nerve regeneration process. Among different candidates, the angiogenic factor VEGF was selected, since angiogenesis has been long recognized as an important and necessary step during tissue repair. Recent studies have pointed out that VEGF has a beneficial effect on motor neuron survival and Schwann cell vitality and proliferation. Moreover, VEGF administration can sustain and enhance the growth of regenerating peripheral nerve fibres. The hydrogel preparation process was optimized to allow functional incorporation of VEGF, while preventing its degradation and denaturation. VEGF release was quantified through ELISA assay, whereas released VEGF bioactivity was validated in human umbilical vein endothelial cells (HUVECs) and in a Schwann cell line (RT4-D6P2T) by assessing VEGFR-2 and downstream effectors Akt and Erk1/2 phosphorylation. Moreover, dorsal root ganglia explants cultured on VEGF-releasing hydrogels displayed increased neurite outgrowth, providing confirmation that released VEGF maintained its effect, as also confirmed in a tubulogenesis assay. In conclusion, a gelatin-based hydrogel system for bioactive VEGF delivery was developed and characterized for its applicability in neural tissue engineering. Copyright © 2014 John Wiley & Sons, Ltd.

Chitosan crosslinked flat scaffolds for peripheral nerve regeneration.

Chitosan (CS) has been widely used in a variety of biomedical applications, including peripheral nerve repair, due to its excellent biocompatibility, biodegradability, readily availability and antibacterial activity. In this study, CS flat membranes, crosslinked with dibasic sodium phosphate (DSP) alone (CS/DSP) or in association with the γ-glycidoxypropyltrimethoxysilane (CS/GPTMS_DSP), were fabricated with a solvent casting technique. The constituent ratio of crosslinking agents and CS were previously selected to obtain a composite material having both adequate mechanical properties and high biocompatibility. In vitro cytotoxicity tests showed that both CS membranes allowed cell survival and proliferation. Moreover, CS/GPTMS_DSP membranes promoted cell adhesion, induced Schwann cell-like morphology and supported neurite outgrowth from dorsal root ganglia explants. Preliminary in vivo tests carried out on both types of nerve scaffolds (CS/DSP and CS/GPTMS_DSP membranes) demonstrated their potential for: (i) protecting, as a membrane, the site of nerve crush or repair by end-to-end surgery and avoiding post-operative nerve adhesion; (ii) bridging, as a conduit, the two nerve stumps after a severe peripheral nerve lesion with substance loss. A 1 cm gap on rat median nerve was repaired using CS/DSP and CS/GPTMS_DSP conduits to further investigate their ability to induce nerve regeneration in vivo. CS/GPTMS_DSP tubes resulted to be more fragile during suturing and, along a 12 week post-operative lapse of time, they detached from the distal nerve stump. On the contrary CS/DSP conduits promoted nerve fiber regeneration and functional recovery, leading to an outcome comparable to median nerve repaired by autograft.

Porous CS based membranes with improved antimicrobial properties for the treatment of infected wound in veterinary applications.

Recently, much attention has been given to the use of innovative solution for the treatment of infected wounds in animals. Current applied treatments are often un-effective leading to infection propagation and animal death. Novel engineered membranes based on chitosan (CS) can be prepared to combine local antimicrobial effect, high flexibility and easy manipulation. In this work, CS crosslinked porous membranes with improved antimicrobial properties were prepared via freeze-drying technique to promote wound healing and to reduce the bacterial proliferation in infected injuries. Silver nanoparticles (AgNPs) and gentamicin sulfate (GS) were incorporated into the CS matrices to impart antibacterial properties on a wild range of strains. CS based porous membranes were tested for their physicochemical, thermal, mechanical as well as swelling and degradation behavior at physiological condition. Additionally, GS release profile was investigated, showing a moderate burst effect in the first days followed by a decreasing release rate which it was maintained for at least 56 days. Moreover, porous membranes loaded with GS or AgNPs showed good bactericidal activity against both of Gram-positive and Gram-negative bacteria. The bacterial strains used in this work were collected in chelonians after carapace injuries to better mimic the environment after trauma.

Chitosan membranes for tissue engineering: comparison of different crosslinkers.

Chitosan (CS), a derivative of the naturally occurring biopolymer chitin, is an attractive material for biomedical applications thanks to its biocompatibility, biodegradability, antibacterial properties and ability to enhance cell adhesion and growth compared to other biopolymers. However, the physical and mechanical stability of CS based materials in aqueous solutions is limited and crosslinking agents are required to increase CS performances in a biological environment. In this work, the effect of three highly-biocompatible crosslinkers as genipin (GP), γ-glycidoxypropyltrimethoxysilane (GPTMS), dibasic sodium phosphate (DSP) and a combination of GPTMS and DSP (GPTMS_DSP) on CS physicochemical, thermal, morphological, mechanical properties, swelling and degradation behavior was investigated. Infrared spectroscopy and thermogravimetric analyses confirmed the chemical reaction between CS and the different crosslinkers. CS wettability was enhanced when CS was DSP ionically crosslinked showing contact angle values of about 65° and exhibiting a higher swelling behavior compared to covalently crosslinked films. Moreover, all the crosslinking methods analyzed improved the stability of CS in aqueous media, showed model molecule permeation in time and increased the mechanical properties when compared with non-crosslinked films. The possibility to tailor the final properties of CS scaffolds through crosslinking is a key strategy in applying CS in different biomedical and tissue engineering applications. The obtained results reveal that the optimization of the crosslinking mechanism provides CS membrane properties required in different biomedical applications.

The influence of electrospun fibre size on Schwann cell behaviour and axonal outgrowth.

Fibrous substrates functioning as temporary extracellular matrices can be prepared easily by electrospinning, yielding fibrous matrices suitable as internal fillers for nerve guidance channels. In this study, gelatin micro- or nano-fibres were prepared by electrospinning by tuning the gelatin concentration and solution flow rate. The effect of gelatin fibre diameter on cell adhesion and proliferation was tested in vitro using explant cultures of Schwann cells (SC) and dorsal root ganglia (DRG). Cell adhesion was assessed by quantifying the cell spreading area, actin cytoskeleton organization and focal adhesion complex formation. Nano-fibres promoted cell spreading and actin cytoskeleton organization, increasing cellular adhesion and the proliferation rate. However, both migration rate and motility, quantified by transwell and time lapse assays respectively, were greater in cells cultured on micro-fibres. Finally, there was more DRG axon outgrowth on micro-fibres. These data suggest that the topography of electrospun gelatin fibres can be adjusted to modulate SC and axon organization and that both nano- and micro-fibres are promising fillers for the design of devices for peripheral nerve repair.

Novel systems for tailored neurotrophic factor release based on hydrogel and resorbable glass hollow fibers.

A novel system for the release of neurotrophic factor into a nerve guidance channel (NGC) based on resorbable phosphate glass hollow fibers (50P2O5-30CaO-9Na2O-3SiO2-3MgO-2.5K2O-2.5TiO2 mol%) in combination with a genipin-crosslinked agar/gelatin hydrogel (A/G_GP) is proposed. No negative effect on the growth of neonatal olfactory bulb ensheathing cell line (NOBEC) as well as on the expression of pro- and anti-apoptotic proteins was measured in vitro in the presence of fiber dissolution products in the culture medium. For the release studies, fluorescein isothiocyanate-dextran (FD-20), taken as growth factor model molecule, was solubilized in different media and introduced into the fiber lumen exploiting the capillary action. The fibers were filled with i) FD-20/phosphate buffered saline (PBS) solution, ii) FD-20/hydrogel solution before gelation and iii) hydrogel before gelation, subsequently lyophilized and then filled with the FD-20/PBS solution. The different strategies used for the loading of the FD-20 into the fibers resulted in different release kinetics. A slower release was observed with the use of A/G_GP hydrogel. At last, poly(ε-caprolactone) (PCL) nerve guides containing the hollow fibers and the hydrogel have been fabricated.

Comparative evaluation of novel biodegradable nanoparticles for the drug targeting to breast cancer cells.

Nanomedicine formulations such as biodegradable nanoparticles (nps) and liposomes offer several advantages over traditional routes of administration: due to their small size, nanocarriers are able to selectively accumulate inside tumours or inflammatory tissues, resulting in improved drug efficacy and reduced side effects. To further augment targeting ability of nanoparticles towards tumour cells, specific ligands or antibodies that selectively recognise biomarkers over-expressed on cancer cells, can be attached to the surface either by chemical bond or by hydrophilic/hydrophobic interactions. In the present work, Herceptin (HER), a monoclonal antibody (mAb) able to selectively recognise HER-2 over-expressing tumour cells (such as breast and ovarian cancer cells), was absorbed on the surface of nanoparticles through hydrophilic/hydrophobic interactions. Nps were prepared by a modified single emulsion solvent evaporation method with five different polymers: three commercial polyesters (poly(ε-caprolactone) (PCL), poly (D,L-lactide) (PLA) and poly (D,L-lactide-co-.glycolide) (PLGA)) and two novel biodegradable polyesterurethanes (PURs) based on Poly(ε-caprolactone) blocks, synthesised with different chain extenders (1,4-cyclohexane dimethanol (CDM) and N-Boc-serinol). Polyurethanes were introduced as matrix-forming materials for nanoparticles due to their high chemical versatility, which allows tailoring of the materials final properties by properly selecting the reagents. All nps exhibited a small size and negative surface charge, suitable for surface functionalisation with mAb through hydrophilic/hydrophobic interactions. The extent of cellular internalisation was tested on two different cell lines: MCF-7 and SK-BR-3 breast cancer cells showing a normal and a high expression of the HER-2 receptor, respectively. Paclitaxel, a model anti-neoplastic drug, was encapsulated inside all nps, and release profiles and cytotoxicity on SK-BR-3 cells were also assessed. Interestingly, PUR nps were superior to commercial polyester-based nps in terms of higher cellular internalisation and cytotoxic activity on the tested cell lines. Results obtained warrants further investigation on the application of these PUR nps for controlled drug delivery and targeting.

Crosslinked gelatin nanofibres: preparation, characterisation and in vitro studies using glial-like cells.

Gelatin (GL) nanofibrous matrices mimicking the complex biological structure of the natural extracellular matrix (ECM) were prepared from aqueous solutions by electrospinning technique. GL nanofibres with a diameter size of around 300nm were obtained optimising the process and solution parameters. To increase the GL stability in aqueous environment γ-glycidoxypropyltrimethoxysilane (GPTMS) was used as GL crosslinker. GPTMS crosslinking did not modify the nanofibrous matrix morphology: fibre diameter and membrane pores size were 327±45 nm and 1.64±0.37 µm, respectively. The produced GPTMS crosslinked GL nanofibres (GL/GPTMS_NF) were found to support the in vitro adhesion, proliferation and survival of neonatal olfactory bulb ensheating cells (NOBECs).

Biological evaluation of materials for cardiovascular application: the role of the short-term inflammatory response in endothelial regeneration.

Because of their suitable bio-mechanical properties, polymeric materials, such as Poly(L-lactic acid) (PLLA), and poly (lactic-co-glycolic acid) (PLGA), are often used in the biomedical field, in particular for cardiovascular applications. Implanted materials induce several events related to the inflammatory reaction, such as macrophage adhesion and activation with following cytokine release. This work considered the effect of macrophage adhesion and related cytokine release on endothelial cells (PAOEC) proliferation and migration. Slight differences have been shown by the macrophages reaction when in contact with PLLA, PLGA, or PLLA/PLGA blend. However, these differences showed to differently enhance endothelial cells behavior in terms of wound healing. These data suggest the inflammatory reaction as a useful way to consider concerning materials biocompatibility, in order to optimize the endothelial regeneration following vascular prosthetic implants.

Study on the interaction between gelatin and polyurethanes derived from fatty acids.

In this study, gelatin was blended to proprietary noncytotoxic polyurethanes (PU) derived from vegetable oils with different weight ratios, as material for the preparation of novel biomedical products. The PU/gelatin blends were characterized for their morphology through scanning electron microscopy. Mechanical and thermal properties, chemical interactions between components, degradation behavior, surface properties, cell adhesion, and bioactivity were investigated as a function of the protein content. Higher blend miscibility was observed for the amorphous PUs, derived from oleic acid. Properties of PU/gelatin films were strongly influenced by the concentration of gelatin in the films. Gelatin enhanced the hydrophilicity, bioactivity, and cell adhesion of PUs.

Biomimetic coating on bioactive glass-derived scaffolds mimicking bone tissue.

Bioceramic "shell" scaffolds, with a morphology resembling the cancellous bone microstructure, have been recently obtained by means of a new protocol, developed with the aim to overcome the limits of the conventional foam replication technique. Because of their original microstructure, the new samples combine high porosity, permeability, and manageability. In this study, for the first time, the novel bioactive glass shell scaffolds are provided with a gelatin-based biomimetic coating to realize hybrid implants which mimic the complex morphology and structure of bone tissue. Moreover, the presence of the coating completely preserves the in vitro bioactivity of the bioactive glass samples, whose surfaces are converted into hydroxyapatite after a few days of immersion in a simulated body fluid solution (SBF).

Processing and characterization of innovative scaffolds for bone tissue engineering.

A new protocol, based on a modified replication method, is proposed to obtain bioactive glass scaffolds. The main feature of these samples, named "shell scaffolds", is their external surface that, like a compact and porous shell, provides both high permeability to fluids and mechanical support. In this work, two different scaffolds were prepared using the following slurry components: 59 % water, 29 % 45S5 Bioglass(®) and 12 % polyvinylic binder and 51 % water, 34 % 45S5 Bioglass(®), 10 % polyvinylic binder and 5 % polyethylene. All the proposed samples were characterized by a widespread microporosity and an interconnected macroporosity, with a total porosity of 80 % vol. After immersion in a simulated body fluid (SBF), the scaffolds showed strong ability to develop hydroxyapatite, enhanced by the high specific surface of the porous systems. Moreover preliminary biological evaluations suggested a promising role of the shell scaffolds for applications in bone tissue regeneration. As regards the mechanical behaviour, the shell scaffolds could be easily handled without damages, due to their resistant external surface. More specifically, they possessed suitable mechanical properties for bone regeneration, as proved by compression tests performed before and after immersion in SBF.

Comparative analysis of gelatin scaffolds crosslinked by genipin and silane coupling agent.

Scaffolds based on gelatin (G) are considered promising for tissue engineering, able to mimic the natural extracellular matrix. G drawback is its poor structural consistency in wet conditions. Therefore, crosslinking is necessary to fabricate stable G scaffolds. In this work, a comparative study between the performance of two different crosslinkers, genipin (GP) and γ-glycidoxypropyltrimethoxysilane (GPTMS), is presented. Flat membranes by solvent casting and porous crosslinked scaffolds by freeze-drying were prepared. Infrared spectroscopy and thermal analysis were applied to confirm G chain crosslinking. Moreover, GP and GPTMS increased the stability of G in aqueous media and improved the mechanical properties. Crosslinking reduced the wettability, especially in the case of G_GPTMS samples, due to the introduction of hydrophobic siloxane chains. Both G_GP and G_GPTMS scaffolds supported MG-63 osteoblast-like cell adhesion and proliferation.