Wafer-Scale Growth of Sb2Te3 Films via Low-Temperature Atomic Layer Deposition for Self-Powered Photodetectors.

In this work, we demonstrate the performance of a silicon-compatible, high-performance, and self-powered photodetector. A wide detection range from visible (405 nm) to near-infrared (1550 nm) light was enabled by the vertical p-n heterojunction between the p-type antimony telluride (Sb2Te3) thin film and the n-type silicon (Si) substrates. A Sb2Te3 film with a good crystal quality, low density of extended defects, proper stoichiometry, p-type nature, and excellent uniformity across a 4 in. wafer was achieved by atomic layer deposition at 80 °C using (Et3Si)2Te and SbCl3 as precursors. The processed photodetectors have a low dark current (∼20 pA), a high responsivity of (∼4.3 A/W at 405 nm and ∼150 mA/W at 1550 nm), a peak detectivity of ∼1.65 × 1014 Jones, and a quick rise time of ∼98 µs under zero bias voltage. Density functional theory calculations reveal a narrow, near-direct, type-II band gap at the heterointerface that supports a strong built-in electric field leading to efficient separation of the photogenerated carriers. The devices have long-term air stability and efficient switching behavior even at elevated temperatures. These high-performance and self-powered p-Sb2Te3/n-Si heterojunction photodetectors have immense potential to become reliable technological building blocks for a plethora of innovative applications in next-generation optoelectronics, silicon-photonics, chip-level sensing, and detection.

Two-Dimensional Cationic Aluminoborate as a New Paradigm for Highly Selective and Efficient Cr(VI) Capture from Aqueous Solution.

Water pollutants existing in their oxyanion forms have high solubility and environmental mobility. To capture these anionic pollutants, cost-effective inorganic materials with cationic frameworks and outstanding removal performance are ideal adsorbents. Herein, we report that two-dimensional (2D) cationic aluminoborate BAC(10) sets a new paradigm for highly selective and efficient capture of Cr(VI) and other oxyanions from aqueous solution. The structure of Cr(VI)-exchanged BAC(10) sample (Cr(VI)@BAC(10), H0.22·Al2BO4.3·(HCrO4)0.22·2.64H2O) has been successfully solved by continuous rotation electron diffraction. The crystallographic data show that the 2D cationic layer of BAC(10) is built by AlO6 octahedra, BO4 tetrahedra, and BO3 triangles. Partial chromate ions exchanged with Cl- ions are located within the interlayer region, which are chemically bonded to the aluminoborate layer. BAC(10) shows faster adsorption kinetics compared to the commercial anion exchange resin (AER) and layered double hydroxides (LDHs), a higher maximum adsorption capacity of 139.1 mg/g than that of AER (62.77 mg/g), LDHs (81.43 mg/g), and a vast majority of cationic MOFs, and a much broader working pH range (2-10.5) than LDHs. Moreover, BAC(10) also shows excellent Cr(VI) oxyanion removal performance for a solution with a low concentration (1-10 mg/L), and the residual concentration can be reduced to below 0.05 mg/L of the WHO drinking water criterion. These superior properties indicate that BAC(10) is a promising material for remediation of Cr(VI) and other harmful oxyanions from wastewater.

A Porphyrinic Zirconium Metal-Organic Framework for Oxygen Reduction Reaction: Tailoring the Spacing between Active-Sites through Chain-Based Inorganic Building Units.

The oxygen reduction reaction (ORR) is central in carbon-neutral energy devices. While platinum group materials have shown high activities for ORR, their practical uses are hampered by concerns over deactivation, slow kinetics, exorbitant cost, and scarce nature reserve. The low cost yet high tunability of metal-organic frameworks (MOFs) provide a unique platform for tailoring their characteristic properties as new electrocatalysts. Herein, we report a new concept of design and present stable Zr-chain-based MOFs as efficient electrocatalysts for ORR. The strategy is based on using Zr-chains to promote high chemical and redox stability and, more importantly, tailor the immobilization and packing of redox active-sites at a density that is ideal to improve the reaction kinetics. The obtained new electrocatalyst, PCN-226, thereby shows high ORR activity. We further demonstrate PCN-226 as a promising electrode material for practical applications in rechargeable Zn-air batteries, with a high peak power density of 133 mW cm-2. Being one of the very few electrocatalytic MOFs for ORR, this work provides a new concept by designing chain-based structures to enrich the diversity of efficient electrocatalysts and MOFs.

High-throughput continuous rotation electron diffraction data acquisition via software automation.

Single-crystal electron diffraction (SCED) is emerging as an effective technique to determine and refine the structures of unknown nano-sized crystals. In this work, the implementation of the continuous rotation electron diffraction (cRED) method for high-throughput data collection is described. This is achieved through dedicated software that controls the transmission electron microscope and the camera. Crystal tracking can be performed by defocusing every nth diffraction pattern while the crystal rotates, which addresses the problem of the crystal moving out of view of the selected area aperture during rotation. This has greatly increased the number of successful experiments with larger rotation ranges and turned cRED data collection into a high-throughput method. The experimental parameters are logged, and input files for data processing software are written automatically. This reduces the risk of human error, and makes data collection more reproducible and accessible for novice and irregular users. In addition, it is demonstrated how data from the recently developed serial electron diffraction technique can be used to supplement the cRED data collection by automatic screening for suitable crystals using a deep convolutional neural network that can identify promising crystals through the corresponding diffraction data. The screening routine and cRED data collection are demonstrated using a sample of the zeolite mordenite, and the quality of the cRED data is assessed on the basis of the refined crystal structure.

Dynamical observations on the crack tip zone and stress corrosion of two-dimensional MoS2.

Whether and how fracture mechanics needs to be modified for small length scales and in systems of reduced dimensionality remains an open debate. Here, employing in situ transmission electron microscopy, atomic structures and dislocation dynamics in the crack tip zone of a propagating crack in two-dimensional (2D) monolayer MoS2 membrane are observed, and atom-to-atom displacement mapping is obtained. The electron beam is used to initiate the crack; during in situ observation of crack propagation the electron beam effect is minimized. The observed high-frequency emission of dislocations is beyond previous understanding of the fracture of brittle MoS2. Strain analysis reveals dislocation emission to be closely associated with the crack propagation path in nanoscale. The critical crack tip plastic zone size of nearly perfect 2D MoS2 is between 2 and 5 nm, although it can grow to 10 nm under corrosive conditions such as ultraviolet light exposure, showing enhanced dislocation activity via defect generation.

Observing grain boundaries in CVD-grown monolayer transition metal dichalcogenides.

Two-dimensional monolayer transition metal dichalcogenides (TMdCs), driven by graphene science, revisit optical and electronic properties, which are markedly different from bulk characteristics. These properties are easily modified due to accessibility of all the atoms viable to ambient gases, and therefore, there is no guarantee that impurities and defects such as vacancies, grain boundaries, and wrinkles behave as those of ideal bulk. On the other hand, this could be advantageous in engineering such defects. Here, we report a method of observing grain boundary distribution of monolayer TMdCs by a selective oxidation. This was implemented by exposing directly the TMdC layer grown on sapphire without transfer to ultraviolet light irradiation under moisture-rich conditions. The generated oxygen and hydroxyl radicals selectively functionalized defective grain boundaries in TMdCs to provoke morphological changes at the boundary, where the grain boundary distribution was observed by atomic force microscopy and scanning electron microscopy. This paves the way toward the investigation of transport properties engineered by defects and grain boundaries.