Modeling Multi-Step Organic Reactions: Can Density Functional Theory Deliver Misleading Chemistry?

Many organic reactions are characterized by a complex mechanism with a variety of transition states and intermediates of different chemical natures. Their correct and accurate theoretical characterization critically depends on the accuracy of the computational method used. In this work, we study a complex ambimodal cycloaddition with five transition states, two intermediates, and three products, and we ask whether density functional theory (DFT) can provide a correct description of this type of complex and multifaceted reaction. Our work fills a gap in that most systematic benchmarks of DFT for chemical reactions have considered much simpler reactions. Our results show that many density functionals not only lead to seriously large errors but also differ from one another in predicting whether the reaction is ambimodal. Only a few of the available functionals provide a balanced description of the complex and multifaceted reactions. The parameters varied in the tested functionals are the ingredients, the treatment of medium-range and nonlocal correlation energy, and the inclusion of Hartree-Fock exchange. These results show a clear need for more benchmarks on the mechanisms of large molecules in complex reactions.

Effect of Polymer Composition on the Optical Properties of a New Aggregation-Induced Emission Fluorophore: A Combined Experimental and Computational Approach.

Nowadays, fluorophores with a tetraphenylethylene (TPE) core are considered interesting due to the aggregation-induced emission (AIE) behavior that enables their effective use in polymer films. We propose a novel TPE fluorophore (TPE-BPAN) bearing two dimethylamino push and a 4-biphenylacetonitrile pull moieties with the typical AIE characteristics in solution and in the solid state, as rationalized by DFT calculations. Five different host polymer matrices with different polarity have been selected: two homopolymers of poly(methylmethacrylate) (PMMA) and poly(cyclohexyl methacrylate) (PCHMA) and three copolymers at different compositions (P(MMA-co-CHMA) 75:25, 50:50, and 25:75 mol%). The less polar comonomer of CHMA appeared to enhance TPE-BPAN emission with the highest quantum yield (QY) of about 40% measured in P(MMA-co-CHMA) 75:25. Further reduction in polymer polarity lowered QY and decreased the film stability and adhesion to the glass surface. LSC performances were not significantly affected by the matrix's polarity and resulted in around one-third of the state-of-the-art due to the reduced QY of TPE-BPAN. The theoretical investigation based on density functional theory (DFT) calculations clarified the origin of the observed AIE and the role played by the environment in modulating the photophysical behavior.

Concerted versus stepwise proton transfer reactions in the [2, 2'-bipyridyl]-3-3'-diol molecule: A static and dynamic ab-initio investigation.

The double proton transfer (PT) reaction has been investigated in the [2,2'-bipyridyl]-3-3'-diol, a complex molecule where the proton movements is coupled to significant rearrangement of the electronic structure. Moreover, the reaction could be concerted, that is the two protons are exchanged simultaneously, or stepwise, where the two protons are transferred sequentially. To this end, a static exploration of the potential energy surface (PES) was carried together with the analysis of the free-energy surface (FES), both surfaces being evaluated at density functional theory level and different exchange-correlation functionals. While the concerted mechanism has been clearly discharged, the characteristics of the stepwise PT significantly depends on the chosen functionals, some suggesting a clear stepwise mechanism characterized by a stable reaction intermediates and two transitions states, whereas other approaches propend for a asynchronous PT, with a single TS. These features appear on both PES and FES, albeit some differences appears due to their different nature.

Barrier Heights for Diels-Alder Transition States Leading to Pentacyclic Adducts: A Benchmark Study of Crowded, Strained Transition States of Large Molecules.

Theoretical characterization of reactions of complex molecules depends on providing consistent accuracy for the relative energies of intermediates and transition states. Here we employ the DLPNO-CCSD(T) method with core-valence correlation, large basis sets, and extrapolation to the CBS limit to provide benchmark values for Diels-Alder transition states leading to competitive strained pentacyclic adducts. We then used those benchmarks to test a diverse set of wave function and density functional methods for the absolute and relative barrier heights of these transition states. Our results show that only a few of the tested density functionals can predict the absolute barrier heights satisfactorily, although relative barrier heights are more accurate. The most accurate functionals tested are ωB97M-V, M11plus, ωB97X-V, PBE-D3(0), M11, and MN15 with MUDs from best estimates less than 3.0 kcal. These findings can guide selection of density functionals for future studies of crowded, strained transition states of large molecules.

Organic compounds for solid state luminescence enhancement/aggregation induced emission: a theoretical perspective.

Organic luminophores displaying one or more forms of luminescence enhancement in solid state are extremely promising for the development and performance optimization of functional materials essential to many modern key technologies. Yet, the effort to harness their huge potential is riddled with hurdles that ultimately come down to a limited understanding of the interactions that result in the diverse molecular environments responsible for the macroscopic response. In this context, the benefits of a theoretical framework able to provide mechanistic explanations to observations, supported by quantitative predictions of the phenomenon, are rather apparent. In this perspective, we review some of the established facts and recent developments about the current theoretical understanding of solid-state luminescence enhancement (SLE) with an accent on aggregation-induced emission (AIE). A description of the macroscopic phenomenon and the questions it raises is accompanied by a discussion of the approaches and quantum chemistry methods that are more apt to model these molecular systems with the inclusion of an accurate yet efficient simulation of the local environment. A sketch of a general framework, building from the current available knowledge, is then attempted via the analysis of a few varied SLE/AIE molecular systems from literature. A number of fundamental elements are identified offering the basis for outlining design rules for molecular architectures exhibiting SLE that involve specific structural features with the double role of modulating the optical response of the luminophores and defining the environment they experience in solid state.

Absorption Spectra of Flexible Fluorescent Probes by a Combined Computational Approach: Molecular Dynamics Simulations and Time-Dependent Density Functional Theory.

A detailed understanding and interpretation of absorption spectra of molecular systems, especially in condensed phases, requires computational models that allow their structural and electronic features to be connected to the observed macroscopic spectra. This work is focused on modeling the electronic absorption spectrum of a fluorescent probe, namely, the 9-(4-((bis(2-((2-(ethylthio)ethyl)thio)ethyl)amino)methyl)phenyl)-6-(pyrrolidin-1-yl)-3H-xanthen-3-one molecule, depicted by a combined classical-quantum chemical approach. Particularly, first classical molecular dynamics (MD) has been used to explore the configurational space, and next, the absorption spectrum has been reconstructed by averaging the results of time-dependent density functional theory (TD-DFT) calculations performed on equispaced molecular conformations extracted from MD to properly sample the configurational space explored at finite temperature. To verify the effect of molecular conformation on the spectral profile, the generated electronic absorption spectra were compared with those obtained considering a single structure corresponding to the optimized one, an approach also referred to as static. This comparison allows one to highlight a sizable though small shift between the maxima of the corresponding reconstructed absorption spectra, highlighting the importance of conformational sampling in the case of this rather flexible molecule. Four different exchange and correlation functionals (PBE, BLYP, PBE0, B3LYP) were considered to compute vertical transition via TD-DFT calculations. From the results obtained in gas and in condensed, here solution, phases, it appears that the magnitude of the shift is actually more affected by the phase in which the system is found than by the functional used. This fact underlines the central importance of conformational mobility, that is flexibility, of this molecule. From a more quantitative point of view, a comparison with available experimental data shows that hybrid functionals, such as PBE0 and B3LYP, enable one to faithfully reproduce the observed absorption maxima.

Copper-Catalyzed Homocoupling of Boronic Acids: A Focus on B-to-Cu and Cu-to-Cu Transmetalations.

Controlling and understanding the Cu-catalyzed homocoupling reaction is crucial to prompt the development of efficient Cu-catalyzed cross-coupling reactions. The presence of a coordinating base (hydroxide and methoxide) enables the B-to-Cu(II) transmetalation from aryl boronic acid to CuIICl2 in methanol, through the formation of mixed Cu-(µ-OH)-B intermediates. A second B-to-Cu transmetalation to form bis-aryl Cu(II) complexes is disfavored. Instead, organocopper(II) dimers undergo a coupled transmetalation-electron transfer (TET) allowing the formation of bis-organocopper(III) complexes readily promoting reductive elimination. Based on this mechanism some guidelines are suggested to control the undesired formation of homocoupling product in Cu-catalyzed cross-coupling reactions.

DFT exchange: sharing perspectives on the workhorse of quantum chemistry and materials science.

In this paper, the history, present status, and future of density-functional theory (DFT) is informally reviewed and discussed by 70 workers in the field, including molecular scientists, materials scientists, method developers and practitioners. The format of the paper is that of a roundtable discussion, in which the participants express and exchange views on DFT in the form of 302 individual contributions, formulated as responses to a preset list of 26 questions. Supported by a bibliography of 777 entries, the paper represents a broad snapshot of DFT, anno 2022.

Following the density evolution using real time density functional theory and density based indexes: Application to model push-pull molecules.

Considering as test case a family of organic rod like push-pull molecules, we derived and applied density based index enabling the description and diagnostic of the electronic density evolution in real time-time dependent density functional theory (RT-TDDFT) simulations. In particular, both the charge transfer (CT) distance and a diagnostic index, the DCT and MAC RT respectively, were computed on the fly from the density distribution obtained at a given time and the reference ground state density and their mean values were compared with what obtained at Linear Response-TDDFT level. Besides giving a way of analyzing the density redistribution occurring in time, these tools allowed to show how RT-TDDFT, which is definitely a powerful method to model the evolution of the density in CT or charge separation processes, can be affected by the same artifacts known for LR-TDDFT approaches and, particularly, to those related to the use of approximate exchange correlation functionals. The analysis here performed allowed to identify and discard on fly the electronic configurations corresponding to spurious situations.

Modeling the spectral properties of poly(x-phenylenediamine) conducting polymers using a combined TD-DFT and electrostatic embedding approach.

The absorption spectra of polymers derived from ortho, meta and para phenylenediamines (o-PDA, m-PDA and p-PDA) have been simulated combining periodic density functional theory (DFT) calculations with time-dependent DFT simulations. These latter have been carried out on finite clusters embedded in a set of point charges devised to exactly reproduce the electrostatic potential of the periodic chains. The results are compared with those obtained for solvated o-PDA, m-PDA and p-PDA oligomers of increasing sizes extracted from the periodic structures. The electronic transitions involved have been investigated by a qualitative analysis based on isodensity maps completed by a quantitative analysis based on the density-based index (DCT ). For poly-(o)- and poly-(p)- phenylenediamines the agreement with the experimental data is achieved already by modeling solvated dimers whereas the inclusion of long-range electrostatic effects is mandatory for poly-(m)-phenylenediamine highlighting the importance of an accurate treatment of the electrostatic environment when a finite cluster approach is considered.

One-Pot anti-Michael Regio- and Stereoselective Hydroamination of Activated N-Allenamides.

N-Allenamides, substituted by an ester at the γ-position, were obtained through addition of terminal ynamides with ethyl diazoacetate under copper catalysis for the first time. Regio- and stereoselective hydroamination of those activated N-allenamides provided exclusively E-configured captodative enamimes through a one-pot anti-Michael addition. Numerous ynamides as well as various secondary amines were adapted in this process.

Free Energy Profiles of Proton Transfer Reactions: Density Functional Benchmark from Biased Ab Initio Dynamics.

By coupling an enhanced sampling algorithm with an orbital-localized variant of Car-Parrinello molecular dynamics, the so-called atomic centered density matrix propagation model, we reconstruct the free energy profiles along reaction pathways using different density functional approximations (DFAs) ranging from locals to hybrids. In particular, we compare the computed free energy barrier height of proton transfer (PT) reactions to those obtained by a more traditional static approach, based on the intrinsic reaction coordinate (IRC), for two case systems, namely malonaldehyde and formic acid dimer. The obtained results show that both the IRC profiles and the potentials of mean force, derived from biased dynamic trajectories, are very sensitive to the density functional approximation applied. More precisely, we observe that, with the notable exception of M06-L, local density functionals always strongly underestimate the reaction barrier heights. More generally, we find that also the shape of the free energy profile is very sensitive to the density functional choice, thus highlighting the effect, often neglected, that the choice of DFA has also in the case of dynamics simulations.

Copper-Catalyzed Synthesis of Terminal vs. Fluorine-Substituted N-Allenamides via Addition of Diazo Compounds to Terminal Ynamides.

A copper-mediated coupling reaction between ynamides and diazo-compounds to produce N-allenamides is reported for the first time. This method enables facile and rapid access to terminal N-allenamides by using commercially available TMS-diazomethane with wide functional group compatibility on the nitrogen. Furthermore, the ubiquity of molecules containing a fluorine moiety in medicine, in agricultural, and material science requires the continuous search of new building blocks, including this unique surrogate. The CuI/diazo protocol was successfully applied to the synthesis of fluorine-substituted N-allenamides. DFT calculations provided insights in the mechanism involved.

Chasing unphysical TD-DFT excited states in transition metal complexes with a simple diagnostic tool.

Transition Metal Complexes (TMCs) are known for the rich variety of their excited states showing different nature and degrees of locality. Describing the energies of these excited states with the same degree of accuracy is still problematic when using time-dependent density functional theory in conjunction with the most current density functional approximations. In particular, the presence of unphysically low lying excited states possessing a relevant Charge Transfer (CT) character may significantly affect the spectra computed at such a level of theory and, more relevantly, the interpretation of their photophysical behavior. In this work, we propose an improved version of the MAC index, recently proposed by the authors and collaborators, as a simple and computationally inexpensive diagnostic tool that can be used for the detection and correction of the unphysically predicted low lying excited states. The analysis, performed on five prototype TMCs, shows that spurious and ghost states can appear in a wide spectral range and that it is difficult to detect them only on the basis of their CT extent. Indeed, both delocalization of the excited state and CT extent are criteria that must be combined, as in the MAC index, to detect unphysical states.

Macrolactonization Reactions Driven by a Pentafluorobenzoyl Group*.

Macrolactones constitute a privileged class of natural and synthetic products with a broad range of applications in the fine chemicals and pharmaceutical industry. Despite all the progress made towards their synthesis, notably from seco-acids, a macrolactonization promoter system that is effective, selective, flexible, readily available, and, insofar as possible, compatible with manifold functional groups is still lacking. Herein, we describe a strategy that relies on the formation of a mixed anhydride incorporating a pentafluorophenyl group which, due to its high electronic activation enables a convenient access to macrolactones, macrodiolides and esters with a broad versatility. Kinetic studies and DFT computations were performed to rationalize the reactivity of the pentafluorophenyl group in macrolactonization reactions.

Direct Synthesis of CF2H-Substituted 2-Amidofurans via Copper-Catalyzed Addition of Difluorinated Diazoacetone to Ynamides.

The significance of molecules containing difluoromethyl groups is driven by their potential applications in pharmaceutical and agrochemical science. Methods for the incorporation of lightly fluorinated groups such as CF2H have been less well developed. Here we report the use of difluorinated diazoacetone as a practical reagent for the direct synthesis of CF2H-substituted 2-amidofurans through addition to ynamides. These newly designed difluorinated amidofurans were elaborated to create new nitrogen-containing frameworks that would be challenging to obtain otherwise.

Metal-Free Deoxygenation of Amine N-Oxides: Synthetic and Mechanistic Studies.

We report herein an unprecedented combination of light and P(III)/P(V) redox cycling for the efficient deoxygenation of aromatic amine N-oxides. Moreover, we discovered that a large variety of aliphatic amine N-oxides can easily be deoxygenated by using only phenylsilane. These practically simple approaches proceed well under metal-free conditions, tolerate many functionalities and are highly chemoselective. Combined experimental and computational studies enabled a deep understanding of factors controlling the reactivity of both aromatic and aliphatic amine N-oxides.

Modeling UV-Vis spectra of low dimensional materials using electrostatic embedding: The case of CdSe.

We present a generalization of a self-consistent electrostatic embedding approach (SC-Ewald) devised to investigate the photophysical properties of 3D periodic materials, to systems in one- or two-dimensional (2D) reduced periodicity. In this approach, calculations are carried out on a small finite molecular cluster extracted from a periodic model, while the crystalline environment is accounted for by an array of point charges which are fitted to reproduce the exact electrostatic potential (at ground or the excited state) of the infinite periodic system. Periodic density functional theory (DFT) calculations are combined with time dependent DFT calculations to simulate absorption and emission properties of the extended system under investigation. We apply this method to compute the UV-Vis. spectra of bulk and quantum-confined 0D quantum dots and 2D extended nanoplatelets of CdSe, due to their relevance as sensitizers in solar cells technologies. The influence of the size and shape of the finite cluster model chosen in the excited state calculations was also investigated and revealed that, although the long-range electrostatics of the environment are important for the calculation of the UV-Vis, a subtle balance between short- and long-range effects exists. These encouraging results demonstrate that this self-consistent electrostatic embedding approach, when applied in different dimensions, can successfully model the photophysical properties of diverse material classes, making it an attractive low-cost alternative to far more computationally demanding electronic structure methods for excited state calculations.

A combined Monte Carlo/DFT approach to simulate UV-vis spectra of molecules and aggregates: Merocyanine dyes as a case study.

The combination of a Monte Carlo (MC) sampling of the configurational space with time dependent-density functional theory (TD-DFT) to estimate vertical excitations energies has been applied to compute the absorption spectra of a family of merocyanine dyes in both their monomeric and dimeric forms. These results have been compared to those obtained using a static DFT/TD-DFT approach as well as to the available experimental spectra. Though suffering of the limitations related to the use of DFT and TD-DFT for this type of systems, our data clearly show that the classical MC sampling provides a suitable alternative to classical molecular dynamics to explore the structural flexibility of these donor-acceptor (D-π-A) chromophores enabling a realistic description of the potential energy surface of both their monomers and aggregates (here dimers) and thus of their spectra. Overall, the combination of MC sampling with quantum mechanics (TD-DFT) calculations, carried out in implicit dioxane solvent on random snapshots, provides a workable compromise to solve the combined challenge of accuracy and time-consuming problem not only for merocyanines momers, but also for their dimers, up to now less investigated. Indeed, the simulated absorption spectra fairly agree with the experimental ones, suggesting the general reliability of the method.

Assessing challenging intra- and inter-molecular charge-transfer excitations energies with double-hybrid density functionals.

We investigate the performance of a set of recently introduced range-separated double-hybrid functionals, namely ωB2-PLYP, ωB2GP-PLYP, RSX-0DH, and RSX-QIDH models for hard-to-calculate excitation energies. We compare with the parent (B2-PLYP, B2GP-PLYP, PBE0-DH, and PBE-QIDH) and other (DSD-PBEP86) double-hybrid models as well as with some of the most widely employed hybrid functionals (B3LYP, PBE0, M06-2X, and ωB97X). For this purpose, we select a number of medium-sized intra- and inter-molecular charge-transfer excitations, which are known to be challenging to calculate using time-dependent density-functional theory (TD-DFT) and for which accurate reference values are available. We assess whether the high accuracy shown by the newest double-hybrid models is also confirmed for those cases too. We find that asymptotically corrected double-hybrid models yield a superior performance, especially for the inter-molecular charge-transfer excitation energies, as compared to standard double-hybrid models. Overall, the PBE-QIDH and its corresponding range-separated RSX-QIDH functional are recommended for general-purpose TD-DFT applications, depending on whether long-range effects are expected to play a significant role.