Field assessment of metal and base cation accumulation in green stormwater infrastructure soils.

Green stormwater infrastructure (GSI) is adopted to reduce the impact of stormwater on urban flooding and water quality issues. This study assessed the performance of GSI, like bioretention basins, in accumulating metals. Twenty one GSI basins were considered for this study, which were located in New York and Pennsylvania, USA. Shallow (0-5 cm) soil samples were collected from each site at inlet, pool, and adjacent reference locations. The study analyzed 3 base cations (Ca, Mg, Na) and 6 metals (Cd, Cr, Cu, Ni, Pb, and Zn), some of which are toxic to ecosystem and human health. The accumulation of cations/metals at the inlet and pool differed between the selected basins. However, accumulation was consistently higher at the inlet or the pool of the basin as compared to the reference location. Contrary to prior research, this study did not find significant accumulation with age, suggesting that other factors such as site characteristics (e.g., loading rate) might be confounding. GSI basins that receive water only from parking lots or parking lots and building roofs combined showed higher metals and Na accumulation as compared to the basins that received stormwater only from building roofs. Cu, Mg and Zn accumulation showed a positive relationship with the organic matter content in soil, indicating likely sorption of metals on organic matter. Ca and Cu accumulation was greater in GSI basins with larger drainage areas. A negative relationship between Cu and Na implies that Na loading from de-icers may reduce Cu retention. Overall, the study found that the GSI basins are successfully accumulating metals and some base cations, with highest accumulation at the inlet. Additionally, this study provided evidence of GSI effectiveness in accumulating metals using a more cost efficient and time averaged approach compared to traditional means of stormwater inflow and outflow monitoring.

An environmental scan of aging-related micro-credentials: implications for gerontology and gerontologists.

The purpose and rise of formal academic programs in gerontology at colleges and universities has been well documented over the last fifty years. What has been less well-documented is the rise of alternative pathways to gerontology training and gerontological competence, including micro-credentialing. Micro-credentials (MCs) are intended to provide quick-to-complete, competency-based education around specific topics to demonstrate relevant skills to employers. Little is known about the prevalence of micro-credentialing related to gerontology. To address this gap, we conducted an environmental scan of existing aging-related micro-credentialing opportunities. We identified 89 MCs with an explicit aging focus, applied strict inclusion criteria (narrowing the sample to 54 MCs included in the analysis), and examined the characteristics of the MCs' scope and nature. Most MCs focused on aging-related health/disease conditions, highlighting the decline mentality underlies such training. Future efforts should entail analysis of the competencies addressed by MCs as it is critical to ensure alignment between gerontological MCs and established gerontological competencies and standards and to differentiate MCs from formal academic programs.

Impacts of the COVID-19 pandemic on pharmaceuticals in wastewater treated for beneficial reuse: Two case studies in central Pennsylvania.

During the COVID-19 pandemic, wastewater surveillance was leveraged as a powerful tool for monitoring community-scale health. Further, the well-known persistence of some pharmaceuticals through wastewater treatment plants spurred concerns that increased usage of pharmaceuticals during the pandemic would increase the concentrations in wastewater treatment plant effluent. We collected weekly influent and effluent samples from May 2020 through May 2021 from two wastewater treatment plants in central Pennsylvania, the Penn State Water Reclamation Facility and the University Area Joint Authority, that provide effluent for beneficial reuse, including for irrigation. Samples were analyzed for severe acute respiratory syndrome coronavirus 2 (influent only), two over-the-counter medicines (acetaminophen and naproxen), five antibiotics (ampicillin, doxycycline, ofloxacin, sulfamethoxazole, and trimethoprim), two therapeutic agents (remdesivir and dexamethasone), and hydroxychloroquine. Although there were no correlations between pharmaceutical and virus concentration, remdesivir detection occurred when the number of hospitalized patients with COVID-19 increased, and dexamethasone detection co-occurred with the presence of patients with COVID-19 on ventilators. Additionally, Penn State decision-making regarding instruction modes explained the temporal variation of influent pharmaceutical concentrations, with detection occurring primarily when students were on campus. Risk quotients calculated for pharmaceuticals with known effective and lethal concentrations at which 50% of a population is affected for fish, daphnia, and algae were generally low in the effluent; however, some acute risks from sulfamethoxazole were high when students returned to campus. Remdesivir and dexamethasone persisted through the wastewater treatment plants, thereby introducing novel pharmaceuticals directly to soils and surface water. These results highlight connections between human health and water quality and further demonstrate the broad utility of wastewater surveillance.

General and gender-specific dynamics determining the health status of employed family caregivers.

We examined whether gender plays a role in how financial strain moderates the relationship between health status and objective burden among employed family caregivers. Using data from "Caregiving in the U.S., 2015," the sample included 704 employed caregivers (311 males and 393 females) of adults 50 years of age and older. The relationship between objective caregiver burden and self-reported health was moderated by financial strain in the full sample. However, in separate analyses by gender, this moderated relationship was limited to females. Findings inform interventions to improve caregiver health while accounting for the financial strain experienced by women in particular.

Age, stereotypes, and nutritional supplements use among middle age and older women.

As aging women take relatively high counts of medications and nutritional supplements, each addition to their supplements roster increases the likelihood of experiencing adverse health outcomes. Given these public health implications, we isolate the effects of chronological age and old age stereotypes in driving up the number of nutritional supplements taken by middle age and older women in the United States. We use multiple models that converge on the finding that middle age women, but not older women, who highly endorse negative old age stereotypes take more supplements than their age peers who fail to highly endorse negative old age stereotypes.

Water quality of runoff from flat panel display glass concrete during modified accelerated aging plus leaching tests.

Flat panel display glass (FPDG) from plasma televisions is difficult to recycle due to their heavy metal composition. When crushed, flat panel display glass has similar physical properties to sand and could be used as a recycled aggregate in concrete, if the potentially harmful metals in FPDG can be encapsulated. To replicate leaching from environmental exposure, at periodic points during freeze-thaw tests, samples of concrete with 0%, 10%, and 20% FPDG were exposed to simulated rainwater and the runoff water was analyzed. For the metals detected (arsenic, barium, chromium, and lead), lead concentrations in the leachate/runoff from 20% FPDG samples exceeded the acute ambient water quality criteria after approximately 50-60 cycles; however, no samples exceeded the toxic characteristic leaching procedure limits at any point during freeze-thaw testing. Increases in lead and chromium concentrations over time indicate a need for stabilization, especially since lead exceeded the acute water quality criteria. PRACTITIONER POINTS: TCLP results indicate flat panel display glass is not expected to release RCRA-8 metals at or above regulatory limits. Accelerated aging-leaching tests indicate lead might be released at levels approaching or exceeding the acute ambient water quality criteria. With additional lead stabilization, this study shows flat panel display glass has the potential to be used in concrete.

Statistical analyses of flow rates of stormwater treatment bioretention media.

The design and performance of stormwater controls is affected by the treatment flow rates of bioretention media. This article presents the results of a large number of laboratory column tests conducted to examine the treatment flow rates for various mixtures of stormwater bioretention media. Statistical analyses were conducted to identify the treatment media having targeted treatment flow rates. It was found that the bioretention media treatment flow rates were most affected by the median particle size (D50 ) and uniformity coefficient (Cu ) of the media, and the amount of organic matter. Statistical models were developed to evaluate and compare the treatment flow rates for various bioretention media mixtures. The findings of previous research (Sileshi, 2013) using two level, four factors (24 , with varying texture [T], uniformity [U], organic content [OC], and compaction [C]) full-factorial experiment study indicated that T and U of the media mixture have the greatest effect on the measured final infiltration rates of the media, followed by interactions of T and U; C; interactions of T and OC of the material; and interactions of U and OC of the material. As expected, media containing primarily larger particles (higher sand percentage) and, that is, uniformly graded (small uniformity coefficients) had the largest treatment flow rates. Compaction had minor effects if the organic matter content was low, but had significant effects on the flow rates for high organic matter content. PRACTITIONER POINTS: Bioretention media treatment flow rates were most affected by the median particle size and uniformity coefficient of the media, and the amount of organic matter. Statistical models were developed to evaluate and compare the treatment flow rates for various bioretention media mixtures. The media containing primarily larger particles and, that is, uniformly graded (small uniformity coefficients) had the largest treatment flow rate.

Evaluation of the Sensititre MycoTB plate for susceptibility testing of the Mycobacterium tuberculosis complex against first- and second-line agents.

The Sensititre MycoTB plate (TREK Diagnostic Systems, Cleveland, OH) uses a microtiter plate MIC format for susceptibility testing of Mycobacterium tuberculosis complex isolates against first- and second-line antituberculosis agents. Categorical agreement versus the agar proportion method for 122 M. tuberculosis complex isolates was 94% to 100%.

Targeting treatment technologies to address specific stormwater pollutants and numeric discharge limits.

Stormwater treatment is entering a new phase with stormwater management systems being required to meet specific numeric objectives, as opposed to the historic approach of meeting guidance-document-provided percent removal rates. Meeting numeric discharge requirements will require designers to better understand and apply the physical, chemical, and biological processes underpinning these treatment technologies. This critical review paper focuses on the potential unit treatment operations available for stormwater treatment and outlines how to identify the most applicable treatment options based on the needed pollutant removal goals.

Indicators of a balanced long-term service and support system: examining the impact on individuals aging with a lifelong disability.

This article explores how rebalancing efforts can support the needs of individuals aging with a lifelong disability. The National Balancing Indicator project examined the overall long-term supports and services system (LTSS) progress in five indicators within the Sustainability, Coordination and Transparency, and Prevention principles toward a balanced LTSS system for those aging with a lifelong disability. In assessing state efforts to create a balanced participant-directed LTSS system with the National Balancing Indicators, the findings suggest states are better equipping the system to handle a burgeoning population of individuals aging with a lifelong disability, but more progress is still needed. Overall, states need to continue to create a seamless system that allows individuals with lifelong disabilities to transition smoothly through the life course.

Antimicrobial susceptibility testing of Mycobacterium tuberculosis complex for first and second line drugs by broth dilution in a microtiter plate format.

The rapid detection of antimicrobial resistance is important in the effort to control the increase in resistant Mycobacterium tuberculosis (Mtb). Antimicrobial susceptibility testing (AST) of Mtb has traditionally been performed by the agar method of proportion or by macrobroth testing on an instrument such as the BACTEC (Becton Dickinson, Sparks, MD), VersaTREK (TREK Diagnostics, Cleveland, OH) or BacT/ALERT (bioMérieux, Hazelwood, MO). The agar proportion method, while considered the "gold" standard of AST, is labor intensive and requires calculation of resistance by performing colony counts on drug-containing agar as compared to drug-free agar. If there is ≥1% growth on the drug-containing medium as compared to drug-free medium, the organism is considered resistant to that drug. The macrobroth methods require instrumentation and test break point ("critical") drug concentrations for the first line drugs (isoniazid, ethambutol, rifampin, and pyrazinamide). The method described here is commercially available in a 96 well microtiter plate format [MYCOTB (TREK Diagnostics)] and contains increasing concentrations of 12 antimicrobials used for treatment of tuberculosis including both first (isoniazid, rifampin, ethambutol) and second line drugs (amikacin, cycloserine, ethionamide, kanamycin, moxifloxacin, ofloxacin, para-aminosalicylic acid, rifabutin, and streptomycin). Pyrazinamide, a first line drug, is not included in the microtiter plate due to its need for acidic test conditions. Advantages of the microtiter system include both ease of set up and faster turn around time (14 days) compared with traditional agar proportion (21 days). In addition, the plate can be set up from inoculum prepared using either broth or solid medium. Since the microtiter plate format is new and since Mtb presents unique safety challenges in the laboratory, this protocol will describe how to safely setup, incubate and read the microtiter plate.

Peristaltic pump autosamplers for solids measurement in stormwater runoff.

Regulatory agencies approve automatic samplers containing peristaltic pumps as a sample collection method for stormwater characterization and for treatment-device evaluation. Autosampler performance, as discussed in the limited available literature, can vary across the entire particle size range typically found in stormwater from different source areas and outfalls-reasonably consistent performance for particle sizes < 250 microm, but much less consistency for particles > 250 microm. Therefore, a series of experiments was undertaken to quantify the upper range of consistent particle capture that may occur with sampling stormwater suspended sediment and particulate-bound pollutants. These experiments, based on triplicate sampling at each experimental condition, found that peristaltic pump autosamplers commonly used in stormwater monitoring could not repeatedly and effectively capture particles > 250 microm from a simulated stormwater whose particles have a specific gravity of 2.65. It was expected that the effective size for autosamplers would be correspondingly larger for particles having smaller specific gravities. The height of the sampler had no influence on particle recovery up to a height of 2.5 m, with slightly decreasing recoveries of large particles occurring at greater heights, as a result of reduced sampler intake velocity. Therefore, to characterize the solids across the entire size range and specific gravities that may occur in stormwater runoff, autosamplers should be deployed in conjunction with bedload and floatables sampling.

Measuring solids concentration in stormwater runoff: comparison of analytical methods.

Stormwater suspended solids typically are quantified using one of two methods: aliquot/subsample analysis (total suspended solids [TSS]) or whole-sample analysis (suspended solids concentration [SSC]). Interproject comparisons are difficult because of inconsistencies in the methods and in their application. To address this concern, the suspended solids content has been measured using both methodologies in many current projects, but the question remains about how to compare these values with historical water-quality data where the analytical methodology is unknown. This research was undertaken to determine the effect of analytical methodology on the relationship between these two methods of determination of the suspended solids concentration, including the effect of aliquot selection/collection method and of particle size distribution (PSD). The results showed that SSC was best able to represent the known sample concentration and that the results were independent of the sample's PSD. Correlations between the results and the known sample concentration could be established for TSS samples, but they were highly dependent on the sample's PSD and on the aliquot collection technique. These results emphasize the need to report not only the analytical method but also the particle size information on the solids in stormwater runoff.

Influencing factors and a proposed evaluation methodology for predicting groundwater contamination potential from stormwater infiltration activities.

To offset the detrimental effects of urbanization on groundwater recharge, stormwater managers are focusing on infiltrating much of the runoff from a site that was generated because of development. For this to be effective, tools are required to predict the potential for contamination resulting from this infiltration for many site conditions, because infiltration should be stressed in areas where the least potential for causing groundwater contamination exists. Factors that influence contamination potential include the pollutant concentration in the runoff directed to the infiltration device and the ability of the underlying soil to remove the pollutant. The groundwater contamination potential of some pollutants, even those with high concentrations and moderate-to-high mobilities, can be reduced with proper pretreatment before infiltration. This paper presents a methodology that can be used to evaluate infiltration as an management option and introduces two different levels of models that could be used to evaluate contamination potential.