Development of a Novel Marine-Derived Tricomposite Biomaterial for Bone Regeneration.

Bone tissue engineering is a promising treatment for bone loss that requires a combination of porous scaffold and osteogenic cells. The aim of this study was to evaluate and develop a tricomposite, biomimetic scaffold consisting of marine-derived biomaterials, namely, chitosan and fucoidan with hydroxyapatite (HA). The effects of chitosan, fucoidan and HA individually and in combination on the proliferation and differentiation of human mesenchymal stem cells (MSCs) were investigated. According to the SEM results, the tricomposite scaffold had a uniform porous structure, which is a key requirement for cell migration, proliferation and vascularisation. The presence of HA and fucoidan in the chitosan tricomposite scaffold was confirmed using FTIR, which showed a slight decrease in porosity and an increase in the density of the tricomposite scaffold compared to other formulations. Fucoidan was found to inhibit cell proliferation at higher concentrations and at earlier time points when applied as a single treatment, but this effect was lost at later time points. Similar results were observed with HA alone. However, both HA and fucoidan increased MSC mineralisation as measured by calcium deposition. Differentiation was significantly enhanced in MSCs cultured on the tricomposite, with increased alkaline phosphatase activity on days 17 and 25. In conclusion, the tricomposite is biocompatible, promotes osteogenesis, and has the structural and compositional properties required of a scaffold for bone tissue engineering. This biomaterial could provide an effective treatment for small bone defects as an alternative to autografts or be the basis for cell attachment and differentiation in ex vivo bone tissue engineering.

In Vitro Degradation of 3D-Printed Poly(L-lactide-Co-Glycolic Acid) Scaffolds for Tissue Engineering Applications.

The creation of scaffolds for cartilage tissue engineering has faced significant challenges in developing constructs that can provide sufficient biomechanical support and offer suitable degradation characteristics. Ideally, such tissue-engineering techniques necessitate the fabrication of scaffolds that mirror the mechanical characteristics of the articular cartilage while degrading safely without damaging the regenerating tissues. The aim of this study was to create porous, biomechanically comparable 3D-printed scaffolds made from Poly(L-lactide-co-glycolide) 85:15 and to assess their degradation at physiological conditions 37 °C in pH 7.4 phosphate-buffered saline (PBS) for up to 56 days. Furthermore, the effect of scaffold degradation on the cell viability and proliferation of human bone marrow mesenchymal stem cells (HBMSC) was evaluated in vitro. To assess the long-term degradation of the scaffolds, accelerated degradation tests were performed at an elevated temperature of 47 °C for 28 days. The results show that the fabricated scaffolds were porous with an interconnected architecture and had comparable biomechanical properties to native cartilage. The degradative changes indicated stable degradation at physiological conditions with no significant effect on the properties of the scaffold and biocompatibility of the scaffold to HBMSC. Furthermore, the accelerated degradation tests showed consistent degradation of the scaffolds even in the long term without the notable release of acidic byproducts. It is hoped that the fabrication and degradation characteristics of this scaffold will, in the future, translate into a potential medical device for cartilage tissue regeneration.

The Role of Extracellular Matrix (ECM) Adhesion Motifs in Functionalised Hydrogels.

To create functional tissue engineering scaffolds, biomaterials should mimic the native extracellular matrix of the tissue to be regenerated. Simultaneously, the survival and functionality of stem cells should also be enhanced to promote tissue organisation and repair. Hydrogels, but in particular, peptide hydrogels, are an emerging class of biocompatible scaffolds which act as promising self-assembling biomaterials for tissue engineering and regenerative therapies, ranging from articular cartilage regeneration at joint defects, to regenerative spinal cord injury following trauma. To enhance hydrogel biocompatibility, it has become imperative to consider the native microenvironment of the site for regeneration, where the use of functionalised hydrogels with extracellular matrix adhesion motifs has become a novel, emerging theme. In this review, we will introduce hydrogels in the context of tissue engineering, provide insight into the complexity of the extracellular matrix, investigate specific adhesion motifs that have been used to generate functionalised hydrogels and outline their potential applications in a regenerative medicine setting. It is anticipated that by conducting this review, we will provide greater insight into functionalised hydrogels, which may help translate their use towards therapeutic roles.

The Osteogenic Potential of Brown Seaweed Extracts.

Marine drugs hold significantly more promise than their terrestrial counterparts, which could help to solve the current shortfall in treatments for osteoporosis and other bone related diseases. Fucoxanthin is the main carotenoid found in brown seaweed, and has many perceived health benefits, including potential bone therapeutic properties. This study assessed the osteogenic potential of pure fucoxanthin and crude extracts containing both fucoxanthin and phenolic fractions (also cited to have osteogenic potential) isolated from two intertidal species of brown seaweed, Laminaria digitata and Ascophyllum nodosum. In vitro studies were performed using a human foetal osteoblast cell line (hFOBs) and primary human bone marrow stromal cells (hBMSCs). The results found pure fucoxanthin inhibitory to cell proliferation in hFOBs at higher concentrations, whereas, the crude extracts containing both polyphenols and fucoxanthin showed the ability to scavenge free radicals, which masked this effect. None of the extracts tested showed strong pro-osteogenic effects in either cell type tested, failing to support previously reported positive effects.

Correction: Screening for osteogenic activity in extracts from Irish marine organisms: The potential of Ceramium pallidum.

[This corrects the article DOI: 10.1371/journal.pone.0207303.].

Screening for osteogenic activity in extracts from Irish marine organisms: The potential of Ceramium pallidum.

Extracts and compounds derived from marine organisms have reportedly shown some osteogenic potential. As such, these bioactives may aid in the treatment of musculoskeletal conditions such as osteoporosis; helping to address inefficacies with current treatment options. In this study, 72 fractions were tested for their in vitro osteogenic activity using a human foetal osteoblast (hFOB) cell line and bone marrow derived mesenchymal stem cells (MSCs), focusing on their cytotoxic, proliferative and differentiation effects. Extracts dissolved in dimethyl sulfoxide and ethanol showed no significant osteogenic potential. However, two extracts derived from powder residues (left over from original organic extractions) caused a significant promotion of MSC differentiation. Bioactivity from powder residues derived from the epiphytic red algae Ceramium pallidum is described in detail to highlight its treatment potential. In vitro, C. pallidum was shown to promote MSC differentiation and extracellular matrix mineralisation. In vivo, this extract caused a significant increase in opercular bone growth of zebrafish larvae and a significant increase in bone density of regenerated adult caudal fins. Our findings therefore show the importance of continued screening efforts, particularly of novel extract sources, and the presence of bioactive compounds in C. pallidum extract.

Bioactive Compounds from Marine Organisms: Potential for Bone Growth and Healing.

Marine organisms represent a highly diverse reserve of bioactives which could aid in the treatment of a wide range of diseases, including various musculoskeletal conditions. Osteoporosis in particular would benefit from a novel and effective marine-based treatment, due to its large disease burden and the inefficiencies of current treatment options. Osteogenic bioactives have been isolated from many marine organisms, including nacre powder derived from molluscan shells and fucoidan-the sulphated polysaccharide commonly sourced from brown macroalgae. Such extracts and compounds are known to have a range of osteogenic effects, including stimulation of osteoblast activity and mineralisation, as well as suppression of osteoclast resorption. This review describes currently known soluble osteogenic extracts and compounds from marine invertebrates and algae, and assesses their preclinical potential.

Blueprints for the Next Generation of Bioinspired and Biomimetic Mineralised Composites for Bone Regeneration.

Coccolithophores are unicellular marine phytoplankton, which produce intricate, tightly regulated, exoskeleton calcite structures. The formation of biogenic calcite occurs either intracellularly, forming 'wheel-like' calcite plates, or extracellularly, forming 'tiled-like' plates known as coccoliths. Secreted coccoliths then self-assemble into multiple layers to form the coccosphere, creating a protective wall around the organism. The cell wall hosts a variety of unique species-specific inorganic morphologies that cannot be replicated synthetically. Although biomineralisation has been extensively studied, it is still not fully understood. It is becoming more apparent that biologically controlled mineralisation is still an elusive goal. A key question to address is how nature goes from basic building blocks to the ultrafine, highly organised structures found in coccolithophores. A better understanding of coccolithophore biomineralisation will offer new insight into biomimetic and bioinspired synthesis of advanced, functionalised materials for bone tissue regeneration. The purpose of this review is to spark new interest in biomineralisation and gain new insight into coccolithophores from a material science perspective, drawing on existing knowledge from taxonomists, geologists, palaeontologists and phycologists.

Red algal extracts from Plocamium lyngbyanum and Ceramium secundatum stimulate osteogenic activities in vitro and bone growth in zebrafish larvae.

Through the current trend for bioprospecting, marine organisms - particularly algae - are becoming increasingly known for their osteogenic potential. Such organisms may provide novel treatment options for osteoporosis and other musculoskeletal conditions, helping to address their large healthcare burden and the limitations of current therapies. In this study, extracts from two red algae - Plocamium lyngbyanum and Ceramium secundatum - were tested in vitro and in vivo for their osteogenic potential. In vitro, the growth of human bone marrow stromal cells (hBMSCs) was significantly greater in the presence of the extracts, particularly with P. lyngbyanum treatment. Osteogenic differentiation was promoted more by C. secundatum (70 µg/ml), though P. lyngbyanum had greater in vitro mineralisation potential. Both species caused a marked and dose-dependent increase in the opercular bone area of zebrafish larvae. Our findings therefore indicate the presence of bioactive components in P. lyngbyanum and C. secundatum extracts, which can promote both in vitro and in vivo osteogenic activity.

Whey Protein Complexes with Green Tea Polyphenols: Antimicrobial, Osteoblast-Stimulatory, and Antioxidant Activities.

Polyphenols are known for their antimicrobial activity, whilst both polyphenols and the globular protein ß-lactoglobulin (bLG) are suggested to have antioxidant properties and promote cell proliferation. These are potentially useful properties for a tissue-engineered construct, though it is unknown if they are retained when both compounds are used in combination. In this study, a range of different microbes and an osteoblast-like cell line (human fetal osteoblast, hFOB) were used to assess the combined effect of: (1) green tea extract (GTE), rich in the polyphenol epigallocatechin gallate (EGCG), and (2) whey protein isolate (WPI), rich in bLG. It was shown that approximately 20-48% of the EGCG in GTE reacted with WPI. GTE inhibited the growth of Gram-positive bacteria, an effect which was potentiated by the addition of WPI. GTE alone also significantly inhibited the growth of hFOB cells after 1, 4, and 7 days of culture. Alternatively, WPI significantly promoted hFOB cell growth in the absence of GTE and attenuated the effect of GTE at low concentrations (64 µg/mL) after 4 and 7 days. Low concentrations of WPI (50 µg/mL) also promoted the expression of the early osteogenic marker alkaline phosphatase (ALP) by hFOB cells, whereas GTE inhibited ALP activity. Therefore, the antioxidant effects of GTE can be boosted by WPI, but GTE is not suitable to be used as part of a tissue-engineered construct due to its cytotoxic effects which negate any positive effect WPI has on cell proliferation.

Exploratory Testing of Diatom Silica to Map the Role of Material Attributes on Cell Fate.

Porous silica is an attractive biomaterial in many applications, including drug-delivery systems, bone-graft fillers and medical devices. The issue with porous silica biomaterials is the rate at which they resorb and the significant role played by interfacial chemistry on the host response in vivo. This paper explores the potential of diatom-biosilica as a model tool to assist in the task of mapping and quantifying the role of surface topography and chemical cues on cell fate. Diatoms are unicellular microalgae whose cell walls are composed of, amorphous nanopatterned biosilica that cannot be replicated synthetically. Their unique nanotopography has the potential to improve understanding of interface reactions between materials and cells. This study used Cyclotella meneghiniana as a test subject to assess cytotoxicity and pro-inflammatory reactions to diatom-biosilica. The results suggest that diatom-biosilica is non-cytotoxic to J774.2 macrophage cells, and supports cell proliferation and growth. The addition of amine and thiol linkers have shown a significant effect on cytotoxicity, growth and cytokine response, thus warranting further investigation into the interfacial effects of small chemical modifications to substrate surfaces. The overall findings suggest diatom-biosilica offers a unique platform for in-depth investigation of the role played by nanotopography and chemistry in biomedical applications.

Effects of poly (ε-caprolactone) coating on the properties of three-dimensional printed porous structures.

Powder-based inkjet three-dimensional printing (3DP) to fabricate pre-designed 3D structures has drawn increasing attention. However there are intrinsic limitations associated with 3DP technology due to the weak bonding within the printed structure, which significantly compromises its mechanical integrity. In this study, calcium sulphate ceramic structures demonstrating a porous architecture were manufactured using 3DP technology and subsequently post-processed with a poly (ε-caprolactone) (PCL) coating. PCL concentration, immersion time, and number of coating layers were the principal parameters investigated and improvement in compressive properties was the measure of success. Interparticle spacing within the 3DP structures were successfully filled with PCL material. Consequently the compressive properties, wettability, morphology, and in vitro resorption behaviour of 3DP components were significantly augmented. The average compressive strength, Young׳s modulus, and toughness increased 217%, 250%, and 315%, following PCL coating. Addition of a PCL surface coating provided long-term structural support to the host ceramic material, extending the resorption period from less than 7 days to a minimum of 56 days. This study has demonstrated that application of a PCL coating onto a ceramic 3DP structure was a highly effective approach to addressing some of the limitations of 3DP manufacturing and allows this advanced technology to be potentially used in a wider range of applications.

Surrogate Outcome Measures of In Vitro Osteoclast Resorption of ß Tricalcium Phosphate.

Introduction of porosity to calcium phosphate scaffolds for bone repair has created a new challenge when measuring bioresorption in vitro, rendering traditional outcome measures redundant. The aim of this study is to identify a surrogate endpoint for use with 3D scaffolds. Murine RAW 264.7 cells are cultured on dense discs of ß-tricalcium phosphate in conditions to stimulate osteoclast (OC) formation. Multinucleated OCs are visible from day 6 with increases at days 8 and 10. Resorption pits are first observed at day 6 with much larger pits visible at days 8, 10, and 12. The concentration of calcium ions in the presence of cells is significantly higher than cell-free cultures at days 3 and 9. Using linear regression analysis, Ca ion release could account for 35.9% of any subsequent change in resorption area. The results suggest that Ca ion release is suitable to measure resorption of a beta-tricalcium phosphate ceramic substrate in vitro. This model could replace the more accepted resorption pit assay in circumstances where quantification of pits is not possible, e.g., when characterizing 3D tissue engineered bone scaffolds.

Biocompatibility of calcium phosphate bone cement with optimised mechanical properties: an in vivo study.

This work establishes the in vivo performance of modified calcium phosphate bone cements for vertebroplasty of spinal fractures using a lapine model. A non-modified calcium phosphate bone cement and collagen-calcium phosphate bone cements composites with enhanced mechanical properties, utilising either bovine collagen or collagen from a marine sponge, were compared to a commercial poly(methyl methacrylate) cement. Conical cement samples (8 mm height × 4 mm base diameter) were press-fit into distal femoral condyle defects in New Zealand White rabbits and assessed after 5 and 10 weeks. Bone apposition and tartrate-resistant acid phosphatase activity around cements were assessed. All implants were well tolerated, but bone apposition was higher on calcium phosphate bone cements than on poly(methyl methacrylate) cement. Incorporation of collagen showed no evidence of inflammatory or immune reactions. Presence of positive tartrate-resistant acid phosphatase staining within cracks formed in calcium phosphate bone cements suggested active osteoclasts were present within the implants and were actively remodelling within the cements. Bone growth was also observed within these cracks. These findings confirm the biological advantages of calcium phosphate bone cements over poly(methyl methacrylate) and, coupled with previous work on enhancement of mechanical properties through collagen incorporation, suggest collagen-calcium phosphate bone cement composite may offer an alternative to calcium phosphate bone cements in applications where low setting times and higher mechanical stability are important.

Ectopic bone formation in rapidly fabricated acellular injectable dense collagen-Bioglass hybrid scaffolds via gel aspiration-ejection.

Gel aspiration-ejection (GAE) has recently been introduced as an effective technique for the rapid production of injectable dense collagen (IDC) gel scaffolds with tunable collagen fibrillar densities (CFDs) and microstructures. Herein, a GAE system was applied for the advanced production and delivery of IDC and IDC-Bioglass(®) (IDC-BG) hybrid gel scaffolds for potential bone tissue engineering applications. The efficacy of GAE in generating mineralizable IDC-BG gels (from an initial 75-25 collagen-BG ratio) produced through needle gauge numbers 8G (3.4 mm diameter and 6 wt% CFD) and 14G (1.6 mm diameter and 14 wt% CFD) was investigated. Second harmonic generation (SHG) imaging of as-made gels revealed an increase in collagen fibril alignment with needle gauge number. In vitro mineralization of IDC-BG gels was confirmed where carbonated hydroxyapatite was detected as early as day 1 in simulated body fluid, which progressively increased up to day 14. In vivo mineralization of, and host response to, acellular IDC and IDC-BG gel scaffolds were further investigated following subcutaneous injection in adult rats. Mineralization, neovascularization and cell infiltration into the scaffolds was enhanced by the addition of BG and at day 21 post injection, there was evidence of remodelling of granulation tissue into woven bone-like tissue in IDC-BG. SHG imaging of explanted scaffolds indicated collagen fibril remodelling through cell infiltration and mineralization over time. In sum, the results suggest that IDC-BG hybrid gels have osteoinductive properties and potentially offer a novel therapeutic approach for procedures requiring the injectable delivery of a malleable and dynamic bone graft that mineralizes under physiological conditions.

Northern Ireland and 'The Troubles', outlining an innovative approach to nursing/midwifery student teaching and module evaluation.

This discussion paper outlines an approach to developing and evaluating an educative programme primarily delivered by lay `citizen trainers' in educating student nurses, and student midwives to the impact of and experience of extended and extensive civil unrest within their communities (`the Troubles' ). This is drawn from experience within the Northern Ireland `Troubles' and all of the citizen trainers were directly affected physically/psychologically. The programme was intended to both educate but primarily to help facilitate student nurses and student midwives to better understanding to experience and context and to more effective care delivery to those affected by/damaged by `the Troubles'. Evaluation of the teaching and learning by the students was significantly positive.

Biocompatibility of calcium phosphate bone cement with optimized mechanical properties.

The broad aim of this work was to investigate and optimize the properties of calcium phosphate bone cements (CPCs) for use in vertebroplasty to achieve effective primary fixation of spinal fractures. The incorporation of collagen, both bovine and from a marine sponge (Chondrosia reniformis), into a CPC was investigated. The biological properties of the CPC and collagen-CPC composites were assessed in vitro through the use of human bone marrow stromal cells. Cytotoxicity, proliferation, and osteoblastic differentiation were evaluated using lactate dehydrogenase, PicoGreen, and alkaline phosphatase activity assays, respectively. The addition of both types of collagen resulted in an increase in cytotoxicity, albeit not to a clinically relevant level. Cellular proliferation after 1, 7, and 14 days was unchanged. The osteogenic potential of the CPC was reduced through the addition of bovine collagen but remained unchanged in the case of the marine collagen. These findings, coupled with previous work showing that incorporation of marine collagen in this way can improve the physical properties of CPCs, suggest that such a composite may offer an alternative to CPCs in applications where low setting times and higher mechanical stability are important.

A meta-analysis of caloric restriction gene expression profiles to infer common signatures and regulatory mechanisms.

Caloric restriction, a reduction in calorie intake without malnutrition, retards age-related degeneration and extends lifespan in several organisms. CR induces multiple changes, yet its underlying mechanisms remain poorly understood. In this work, we first performed a meta-analysis of microarray CR studies in mammals and identified genes and processes robustly altered due to CR. Our results reveal a complex array of CR-induced changes and we re-identified several genes and processes previously associated with CR, such as growth hormone signalling, lipid metabolism and immune response. Moreover, our results highlight novel associations with CR, such as retinol metabolism and copper ion detoxification, as well as hint of a strong effect of CR on circadian rhythms that in turn may contribute to metabolic changes. Analyses of our signatures by integrating co-expression data, information on genetic mutants, and transcription factor binding site analysis revealed candidate regulators of transcriptional modules in CR. Our results hint at a transcriptional module involved in sterol metabolism regulated by Srebf1. A putative regulatory role of Ppara was also identified. Overall, our conserved molecular signatures of CR provide a comprehensive picture of CR-induced changes and help understand its regulatory mechanisms.

Body mass index is more predictive of progenitor number in bone marrow stromal cell population than age in men: expanding the predictors of the progenitor compartment.

Research has focused on in vitro expansion of bone marrow stromal cells with the aim of developing cell-based therapies or tissue-engineered constructs. There is debate over whether there is a reduction in stem cells/osteoprogenitors in the bone marrow compartment with increasing age. The aim of this study was to investigate patient factors that affect the progenitor pool in bone marrow samples. Six milliliters of marrow aspirate was obtained from the femoral canal of 38 primary hip replacement patients (aged 28-91). Outcome measures were total nucleated cell count, colony-forming efficiency, alkaline phosphatase expression, and expression of stem cell markers. There was a nonsignificant negative correlation between age and both colony-forming efficiency and stem cell marker expression. However, body mass index showed a positive, significant correlation with colony area and number in men-accounting for up to 75% of the variation. In conclusion, body mass index, not age, was highly predictive of the number of progenitors found in bone marrow, and this relationship was sex specific. These results may inform the clinician's treatment choice when considering bone marrow-based therapies. Further, it highlights the need to widen research into patient factors that affect the adult stem cell population beyond age and reinforces the need to consider sexes separately.