RESUMO
We present a method for printing conductive polymers onto P(VDF-TrFE) nanofibers to create all-polymer piezoelectric devices. Inkjet printing is an attractive fabrication approach for rapid prototyping of flexible electronics, but until now with limited applications in developing P(VDF-TrFE) nanofiber-based devices. We have demonstrated an approach to infill the void space within a piezoelectric nanofibrous matrix to allow for the inkjet printing of aqueous inks while avoiding leakage that typically leads to electrical shorting and without significant loss of voltage output. This was done using a diluted PDMS solution and a commercially available conductive ink. The 1 cm2 devices showed a 254 mV/N sensitivity to impact as well as a sensitivity to bending. The device was shown to be able to detect breathing and pulse rate when placed superficially to the carotid and radial arteries. Using these techniques, flexible piezoelectric sensing can be done in an array format, shown with applications in foot movement sensing.
RESUMO
Harvesting biomechanical energy to power implantable electronics such as pacemakers has been attracting great attention in recent years because it replaces conventional batteries and provides a sustainable energy solution. However, current energy harvesting technologies that directly interact with internal organs often lack flexibility and conformability, and they usually require additional implantation surgeries that impose extra burden to patients. To address this issue, here a Kirigami inspired energy harvester, seamlessly incorporated into the pacemaker lead using piezoelectric composite films is reported, which not only possesses great flexibility but also requires no additional implantation surgeries. This lead-based device allows for harvesting energy from the complex motion of the lead caused by the expansion-contraction of the heart. The device's Kirigami pattern has been designed and optimized to attain greatly improved flexibility which is validated via finite element method (FEM) simulations, mechanical tensile tests, and energy output tests where the device shows a power output of 2.4 µW. Finally, an in vivo test using a porcine model reveals that the device can be implanted into the heart straightforwardly and generates voltages up to ≈0.7 V. This work offers a new strategy for designing flexible energy harvesters that power implantable electronics.
Assuntos
Fontes de Energia Elétrica , Marca-Passo Artificial , Animais , Eletrônica , Humanos , Movimento (Física) , Próteses e Implantes , SuínosRESUMO
Piezoelectric nanomaterial-polymer composites represent a unique paradigm for making flexible energy harvesting and sensing devices with enhanced devices' performance. In this work, we studied various metal doped ZnO nanostructures, fabricated and characterized ZnO nanoparticle-PVDF composite thin film, and demonstrated both enhanced energy generation and motion sensing capabilities. Specifically, a series of flexible piezoelectric nanogenerators (PENGs) were designed based on these piezoelectric composite thin films. The voltage output from cobalt (Co), sodium (Na), silver (Ag), and lithium (Li) doped ZnO-PVDF composite as well as pure ZnO-PVDF samples were individually studied and compared. Under the same experimental conditions, the Li-ZnO based device produces the largest peak-to-peak voltage (3.43 Vpp) which is about 9 times of that of the pure ZnO based device, where Co-ZnO, Na-ZnO and Ag-ZnO are 1.2, 4.9 and 5.4 times, respectively. In addition, the effect of doping ratio of Li-ZnO is studied, and we found that 5% is the best doping ratio in terms of output voltage. Finally, we demonstrated that the energy harvested by the device from finger tapping at ~2 Hz can charge a capacitor with a large output power density of 0.45 W/cm3 and light up an ultraviolet (UV) light-emitting diode (LED). We also showed the device as a flexible wearable motion sensor, where different hand gestures were detected by the device with distinctive output voltage amplitudes and patterns.
RESUMO
Implantable medical devices, such as cardiac pacemakers and defibrillators, rely on batteries for operation. However, conventional batteries only last for a few years, and additional surgeries are needed for replacement. Harvesting energy directly from the human body enables a new paradigm of self-sustainable power sources for implantable medical devices without being constrained by the battery's limited lifetime. Here, we report the design of a multibeam cardiac energy harvester using polydimethylsiloxane (PDMS)-infilled microporous P(VDF-TrFE) composite films. We first added ZnO nanoparticles and multiwall carbon nanotubes into microporous P(VDF-TrFE) films to increase the energy output. The mixing ratios of 30% ZnO and 0.1% MWCNTs yielded 3.22 ± 0.24 V output, which resulted in a voltage output 46 times higher than that of pure P(VDF-TrFE) films. Next, we discovered that the voltage generated by the composite film with PDMS is approximately 105% higher than that of the one without PDMS. For the application in cardiac pacemakers, we developed a facile fabrication method by building a cylindrical multibeam device that resides on the pacemaker lead to harvest energy from the complex motion of the lead driven by the heartbeat. Since the energy harvesting component is integrated into the pacemaker, it significantly reduces the risks and expenses associated with pacemaker-related surgeries. This work paves the way toward the new generation of energy harvesters that will benefit patients with a variety of implantable biomedical devices.
Assuntos
Fontes de Energia Elétrica , Marca-Passo Artificial , Dimetilpolisiloxanos/química , Sistemas Microeletromecânicos , Nanotubos de Carbono/química , Porosidade , Óxido de Zinco/químicaRESUMO
Biomedical self-sustainable energy generation represents a new frontier of power solution for implantable biomedical devices (IMDs), such as cardiac pacemakers. However, almost all reported cardiac energy harvesting designs have not yet reached the stage of clinical translation. A major bottleneck has been the need of additional surgeries for the placements of these devices. Here, integrated piezoelectric-based energy harvesting and sensing designs are reported, which can be seamlessly incorporated into existing IMDs for ease of clinical translation. In vitro experiments validate the energy harvesting process by simulating the bending and twisting motion during heart cycle. Clinical translation is demonstrated in four porcine hearts in vivo under various conditions. Energy harvesting strategy utilizes pacemaker leads as a means of reducing the reliance on batteries and demonstrates the charging ability for extending the lifetime of a pacemaker battery by 20%, which provides a promising self-sustainable energy solution for IMDs. The additional self-powered blood pressure sensing is discussed, and the reported results demonstrate the potential in alerting arrhythmias by monitoring the right ventricular pressure variations. This combined cardiac energy harvesting and blood pressure sensing strategy provides a multifunctional, transformative while practical power and diagnosis solution for cardiac pacemakers and next generation of IMDs.
Assuntos
Marca-Passo Artificial , Animais , Fontes de Energia Elétrica , Coração , Próteses e Implantes , SuínosRESUMO
Microfluidics brings unique opportunities for engineering micro-/nanomaterials with well-controlled physicochemical properties. Herein, using a miniaturized multi-run spiral-shaped microreactor, we develop a flow synthesis strategy to continuously produce hollow spherical silica (HSS) with hierarchical sponge-like pore sizes ranging from several nanometers to over one hundred nanometers. The formation of HSS is realized by mixing two reactant flows, one containing cetyltrimethylammonium bromide (CTAB) and diluted ammonia and the other 1,3,5-trimethylbenzene (TMB) and diluted tetraethyl orthosilicate (TEOS), at a flow rate as high as 5 mL/min. The effect of the reactant concentration and the flow rate on the structural change of the resultant materials is examined. Functional small-sized nanoparticles (magnetic nanoparticle, quantum dot, and silver nanoparticle) can be separately assembled into HSS and high molecular weight protein (bovine serum albumin) can be successfully loaded into HSS and delivered into cancer cells afterward, making them promising in the fields of separation and purification, bioimaging, catalysis, and theranostics.
RESUMO
The merits of microfluidics bring new opportunities for engineering of nanomaterials with well controlled chemical, physical and biological properties for a variety of applications. Herein, using a two-run spiral-shaped microfluidic device, we first develop a facile and straightforward flow synthesis strategy to create two-dimensional mesoporous silica nanosheet (MSN). Such MSN exhibits typical hollow sandwich-like bilayer and unique water ripple-like wrinkle surface, which greatly increase the particulate accessibility for mass transfer. The enhanced on-chip enrichment performance of MSN is further confirmed toward different substrates (dye, protein, drug). These findings not only shed new light on microfluidics-enabled chemicals engineering, but also open up numerous new possibilities by microfluidics in adsorption, separation, and biomedical fields.
Assuntos
Técnicas Analíticas Microfluídicas , Nanopartículas/química , Dióxido de Silício/química , Tamanho da Partícula , Porosidade , Dióxido de Silício/síntese química , Propriedades de Superfície , Água/químicaRESUMO
Vibration-based energy-harvesting technology, as an alternative power source, represents one of the most promising solutions to the problem of battery capacity limitations in wearable and implantable electronics, in particular implantable biomedical devices. Four primary energy transduction mechanisms are reviewed, namely piezoelectric, electromagnetic, electrostatic, and triboelectric mechanisms for vibration-based energy harvesters. Through generic modeling and analyses, it is shown that various approaches can be used to tune the operation bandwidth to collect appreciable power. Recent progress in biomechanical energy harvesters is also shown by utilizing various types of motion from bodies and organs of humans and animals. To conclude, perspectives on next-generation energy-harvesting systems are given, whereby the ultimate intelligent, autonomous, and tunable energy harvesters will provide a new energy platform for electronics and wearable and implantable medical devices.
RESUMO
Microfluidics-based reactors enables the controllable synthesis of micro-/nanostructures for a broad spectrum of applications from materials science, bioengineering to medicine. In this study, we first develop a facile and straightforward flow synthesis strategy to control zinc oxide (ZnO) of different shapes (sphere, ellipsoid, short rod, long rod, cube, urchin, and platelet) on a few seconds time scale, based on the 1.5-run spiral-shaped microfluidic reactor with a relative short microchannel length of ca. 92 mm. The formation of ZnO is realized simply by mixing reactants through two inlet flows, one containing zinc nitrate and the other sodium hydroxide. The structures of ZnO are tuned by choosing appropriate flow rates and reactant concentrations of two inlet fluids. The formation mechanism behind microfluidics is proposed. The photocatalysis, cytotoxicity, and piezoelectric capabilities of as-synthesized ZnO from microreactors are further examined, and the structure-dependent efficacy is observed, where higher surface area ZnO structures generally behave better performance. These results bring new insights not only in the rational design of functional micro-/nanoparticles from microfluidics, but also for deeper understanding of the structure-efficacy relationship when translating micro-/nanomaterials into practical applications.
RESUMO
By incorporating mesoporous piezoelectric materials and tuning mechanical boundary conditions a simple beam structure can significantly take advantage of limited mechanical displacements for energy harvesting. Specifically, we employed a mesoporous PVDF-TrFE composite thin film mixed with single-wall carbon nanotubes to improve the formation of the crystalline phase in this piezoelectric polymer. The film was then patterned on a thin buckled beam to form a compact energy harvester, which was used to study the effects of two boundary conditions, including the end rotation angle and the location of a mechanical stop along the beam. We carefully designed controlled experiments using mesoporous PVDF-TrFE film and PVDF-TrFE/SWCNT composite films, both of which were tested under two cases of boundary conditions, namely, the rotation of the end angle and the addition of a mechanical stop. The voltage and current of the energy harvester under these two boundary conditions were, respectively, increased by approximately 160.1% and 200.5% compared to the results of its counterpart without imposing any boundary conditions. Thereby, our study offers a promising platform for efficiently powering implantable and wearable devices for harnessing energy from the human body which would otherwise have been wasted.
RESUMO
Liquid biopsy, as a minimally invasive method of gleaning insight into the dynamics of diseases through a patient fluid sample, has been growing in popularity for cancer diagnosis, prognosis, and monitoring. While many technologies have been developed and validated in research laboratories, there has also been a push to expand these technologies into other clinical settings and as point of care devices. In this article, we discuss and evaluate microchip-based technologies for circulating tumor cell (CTC), exosome, and circulating tumor nucleic acid (ctNA) capture, detection, and analysis. Such integrated systems streamline otherwise multiple-step, manual operations to get a sample-to-answer quantitation. In addition, analysis of disease biomarkers is suited to point of care settings because of ease of use, low consumption of sample and reagents, and high throughput. We also cover the basics of biomarkers and their detection in biological fluid samples suitable for liquid biopsy on-chip. We focus on emerging technologies that process a small patient sample with high spatial-temporal resolution and derive clinically meaningful results through on-chip biomarker sensing and downstream molecular analysis in a simple workflow. This critical review is meant as a resource for those interested in developing technologies for capture, detection, and analysis platforms for liquid biopsy in a variety of settings.
Assuntos
Biomarcadores Tumorais/análise , Dispositivos Lab-On-A-Chip , Biópsia Líquida , Neoplasias , Técnicas Biossensoriais , Humanos , Neoplasias/diagnóstico , Neoplasias/metabolismo , Neoplasias/terapia , Sistemas Automatizados de Assistência Junto ao LeitoRESUMO
Herein, a facile strategy was firstly developed to synthesize ellipsoidal mesoporous silica nanomaterials (MSNs) with well-ordered parallel channels along the short axis. A miniaturized microfluidic device with spiral-shaped channels was then chosen as a straightforward and general platform to produce the corresponding hollow counterparts of MSNs under mild conditions. Such reaction process carried out in a microfluidic system was further demonstrated to be more rapid and efficient than conventional batch method under equivalent experimental conditions. The evolution of hollow structure can be well-tuned by flow rates (i.e., etching time), providing new paradigm for rational design and engineering of anisotropic nanostructures.