Diversity study on Sclerotinia trifoliorum Erikks., the causal agent of clover rot in red clover crops (Trifolium pratense L.).

Since the 16th century, red clover has been an important crop in Europe. Since the 1940s, the European areal of red clover has been severely reduced, due to the availability of chemical fertilizers and the growing interest in maize. Nowadays there is a growing interest in red clover again, although some setbacks still remain. An important setback is the low persistence of red clover crops. Clover rot, caused by the ascomycete fungus Sclerotinia trifoliorum Erikss., is a major disease in Europe and reduces the persistence of red clover crops severely. The fungus infects clover plants through ascospores in the autumn, the disease develops during the winter and early spring and can kill many plants in this period. In early spring, black sclerotia, serving as surviving bodies, are formed on infected plants. Sclerotia can survive up to 7 years in the soil (Ohberg, 2006). The development of clover rot is highly dependent on the weather conditions: a humid fall, necessary for the germination of the ascospores and an overall warm winter with short periods of frost are favourable for the disease. Cold and dry winters slow the mycelial growth down too much and prevent the disease from spreading. Clover rot is difficult to control and completely resistant red clover varieties have yet to be developed. Because of the great annual variation in disease severity, plant breeders cannot use natural infection as an effective means to screen for resistant material. Breeding for resistant cultivars is being slowed down by the lack of a bio-test usable in breeding programs. When applying artificial infections, it is necessary to have an idea of the diversity of the pathogen. A diverse population will require resistance screening with multiple isolates. The objective of this research is to investigate the genetic diversity among isolates from the pathogen S. trifoliorum from various European countries. We assessed diversity using a species identification test based on the sequence of the beta-tubulin gene, vegetative compatibility grouping and AFLP.

An AFLP-based genome-wide mapping strategy.

To efficiently determine the chromosomal location of phenotypic mutants, we designed a genome-wide mapping strategy that can be used in any crop for which a dense AFLP (Amplified Fragment Length Polymorphism) map is available or can be made. The AFLP technique is particularly suitable to initiate map-based cloning projects because it detects many markers per reaction. First a standard set of AFLP primer combinations that results in a framework of AFLP markers well dispersed over the genome is selected. These primer combinations are applied to a limited number of mutant individuals from a segregating population to register linkage and non-linkage of the AFLP markers to the gene-of-interest. Further delineation of the area of interest is accomplished by analyzing the remaining recombinants and additional mutant individuals with AFLP markers that lie within the identified region. We illustrate the usefulness of the method by mapping three rotunda ( ron) leaf-form mutant loci of Arabidopsis thaliana and show that in the initial phase of map-based cloning projects a 400-600 kb interval can be identified for the average mutant locus within a few weeks. Once such an area is identified and before initiating the more time-consuming fine-mapping procedure, it is essential to examine publicly available databases for candidate genes and known mutants in the identified region. The 390-kb interval on chromosome 4 that harbors the ron2 mutation, also carries a known flower mutant, leunig ( lug); upon crossing, the two mutants appeared to be allelic. When no such candidates are found, the mapping procedure should be continued. We present a strategy to efficiently select recombinants that can be used for fine mapping.

A physical amplified fragment-length polymorphism map of Arabidopsis.

We have positioned amplified fragment-length polymorphism (AFLP) markers directly on the genome sequence of a complex organism, Arabidopsis, by combining gel-based AFLP analysis with in silico restriction fragment analysis using the published genome sequence. For placement of the markers, we used information on restriction fragment size, four selective nucleotides, and the rough genetic position of the markers as deduced from the analysis of a limited number of Columbia (Col)/Landsberg (Ler) recombinant inbred lines. This approach allows for exact physical positioning of markers as opposed to the statistical localization resulting from traditional genetic mapping procedures. In addition, it is fast because no extensive segregation analysis is needed. In principle, the method can be applied to all organisms for which a complete or nearly complete genome sequence is available. We have located 1,267 AFLP Col/Ler markers resulting from 256 SacI+2, MseI+2 primer combinations to a physical position on the Arabidopsis genome. The positioning was verified by sequence analysis of 70 markers and by segregation analysis of two leaf-form mutants. Approximately 50% of the mapped Col/Ler AFLP markers can be used for segregation analysis in Col/C24, Col/Wassilewskija, or Col/Cape Verde Islands crosses. We present data on one such cross: the localization of a viviparous-like mutant segregating in a Col/C24 cross.

AtCSLD3, a cellulose synthase-like gene important for root hair growth in arabidopsis.

A member of the cellulose synthase-like (subfamily D) gene family of Arabidopsis, AtCSLD3, has been identified by T-DNA tagging. The analysis of the corresponding mutant, csld3-1, showed that the AtCSLD3 gene plays a role in root hair growth in plants. Root hairs grow in phases: First a bulge is formed and then the root hair elongates by polarized growth, the so-called "tip growth." In the mutant, root hairs were initiated at the correct position and grew into a bulge, but their elongation was severely reduced. The tips of the csld3-1 root hairs easily leaked cytoplasm, indicating that the tensile strength of the cell wall had changed at the site of the tip. Based on the mutant phenotype and the functional conservation between CSLD3 and the genuine cellulose synthase proteins, we hypothesized that the CSLD3 protein is essential for the synthesis of polymers for the fast-growing primary cell wall at the root hair tip. The distinct mutant phenotype and the ubiquitous expression pattern indicate that the CSLD3 gene product is only limiting at the zone of the root hair tip, suggesting particular physical properties of the cell wall at this specific site of the root hair cell.

Tornado1 and tornado2 are required for the specification of radial and circumferential pattern in the Arabidopsis root.

The cell layers of the Arabidopsis primary root are arranged in a simple radial pattern. The outermost layer is the lateral root cap and lies outside the epidermis that surrounds the ground tissue. The files of epidermal and lateral root cap cells converge on a ring of initials (lateral root cap/epidermis initial) from which the epidermal and lateral root cap tissues of the seedling are derived, once root growth is initiated after germination. Each initial gives rise to a clone of epidermal cells and a clone of lateral root cap cells. These initial divisions in the epidermal/lateral root cap initial are defective in tornado1 (trn1) and trn2 plants indicating a requirement for TRN1 and TRN2 for initial cell function. Furthermore, lateral root cap cells develop in the epidermal position in trn1 and trn2 roots indicating that TRN1 and TRN2 are required for the maintenance of the radial pattern of cell specification in the root. The death of these ectopic lateral root cap cells in the elongation zone (where lateral root cap cells normally die) results in the development of gaps in the epidermis. These observations indicate that TRN1 and TRN2 are required to maintain the distinction between the lateral root cap and epidermis and suggest that lateral root cap fate is the default state. It also suggests that TRN1 and TRN2 repress lateral root cap fate in cells in the epidermal location. Furthermore, the position-dependent pattern of root hair and non-root hair cell differentiation in the epidermis is defective in trn1 and trn2 mutants. Together these results indicate that TRN1 and TRN2 are required for the maintenance of both the radial pattern of tissue differentiation in the root and for the subsequent circumferential pattern within the epidermis.

Chromosome landing at the Arabidopsis TORNADO1 locus using an AFLP-based strategy.

The Arabidopsis tornado1 (trn1) mutation causes severe dwarfism combined with twisted growth of all organs. We present a chromosome landing strategy, using amplified restriction fragment length polymorphism (AFLP) marker technology, for the isolation of the TRN1 gene. The recessive trn1 mutation was identified in a C24 transgenic line and is located 5 cM from a T-DNA insertion. We mapped the TRN1 locus to the bottom half of chromosome 5 relative to visible and restriction fragment length polymorphism (RFLP) markers. Recombinant classes within a 3-cM region around TRN1 were used to build a high-resolution map in this region, using the AFLP technique. Approximately 300 primer combinations have been used to test about 26,000 fragments for polymorphisms. Seventeen of these AFLP markers were identified in the 3-cM region around TRN1. These markers were mapped within this region using individual recombinants. Four of these AFLP markers co-segregate with TRN1 whereas one maps at one recombinant below TRN1. We isolated and cloned three of these AFLP markers. These markers identified two yeast artificial chromosome (YAC) clones, containing the RFLP marker above and the AFLP marker below TRN1, demonstrating that these YACs span the TRN1 locus and that chromosome landing has been achieved, using an AFLP-based strategy.

Transgenic Arabidopsis tester lines with dominant marker genes.

The map positions of a set of eight T-DNA insertions in the Arabidopsis genome have been determined by using closely linked visible markers. The insertions are dispersed over four of the five chromosomes. Each T-DNA insert contains one or more of the chimeric marker genes neomycin phosphotransferase (neo), hygromycin phosphotransferase (hpt), phosphinothricin acetyltransferase (bar), beta-glucuronidase (gusA) and indole-3-acetamide hydrolase (iaaH). The neo, hpt and bar marker genes are dominant in a selective germination assay or when used as DNA markers in a polymerase chain reaction. These dominant markers will allow recombinants to be discerned in a germinating F2 population, one generation earlier than with a conventional recessive marker. The transgenic marker lines will speed up and simplify the isolation of recombinants in small genetic intervals, a rate-limiting step in positional cloning strategies. The transgenic lines containing the hpt marker will also be of interest for the isolation of deletion mutants at the T-DNA integration sites.

Detailed description of four YAC contigs representing 17 Mb of chromosome 4 of Arabidopsis thaliana ecotype Columbia.

The detailed arrangement of 563 YAC clones comprising four contigs covering approximately 17 Mbp of chromosome 4 is presented. YAC clones were positioned relative to each other and to markers by taking into account marker and end fragment hybridization data and the sizes of all YAC clones. This analysis made it possible to estimate physical distances between the majority of chromosome 4 markers. It also identified a relatively large number of YAC clones containing chimaeric inserts. The YAC contig map of the Columbia ecotype presents an important resource for map-based cloning experiments, rapid mapping of DNA sequences and large-scale genomic sequencing programs.

Analysis of clones carrying repeated DNA sequences in two YAC libraries of Arabidopsis thaliana DNA.

YAC clones carrying repeated DNA sequences from the Arabidopsis thaliana genome have been characterized in two widely used Arabidopsis YAC libraries, the EG library and the EW library. Ribosomal, chloroplast and the paracentromeric repeat sequences are differentially represented in the two libraries. The coordinates of YAC clones hybridizing to these sequences are given. A high proportion of EG YAC clones were classified as containing chimaeric inserts because individual clones carried unique sequences and repetitive sequences originating from different locations in the genome. None of the EW YAC clones analysed were chimaeric in this way. YAC clones carrying tandemly repeated sequences, such as the paracentromeric or rDNA sequences, exhibited a high degree of instability. These observations need to be taken into account when using these libraries in the development of a physical map of the Arabidopsis genome and in chromosome walking experiments.

Identification and map position of YAC clones comprising one-third of the Arabidopsis genome.

YAC clones corresponding to 125 Arabidopsis thaliana RFLP markers have been identified. At least one YAC clone has been isolated for each of the RFLP markers tested. Based on CHEF gel analysis of 196 clones, the mean insert size of the available Arabidopsis YAC libraries is approximately 160 kb. The YACs of known genetic map location encompass about 30% of the Arabidopsis genome. The results presented here represent a first step towards assembly of an overlapping YAC library of the A. thaliana genome.