Research methods assessing sodium hypochlorite cytotoxicity: A scoping review.

Sodium hypochlorite (NaOCl) cytotoxicity has been assessed using different methodologies, which has led to arbitrary interpretations. This scoping review aimed to discuss the different methodological protocols for assessing NaOCl cytotoxicity. A literature review performed in the PubMed and Embase databases up to July 2023 identified manuscripts reporting NaOCl cytotoxicity. The dataset identified 546 publications, further screened by 2 reviewers. Ninety studies were identified and mined methodologically to collect information on cell type, cytotoxicity assay, NaOCl dilution solutions, presence of fetal bovine serum (FBS), and NaOCl exposure time. The culture medium used in cytotoxicity assays contains buffering substances that neutralize the pH of NaOCl, thus reducing its cytotoxicity, an approach that may lead to bias when solutions with different pH are compared. For short exposure periods, as in simulations to evaluate the contact between irrigant and periapical tissue cells during chemo-mechanical preparation, NaOCl dilution should be performed with saline, which does not buffer the irrigant. For long exposure periods, as in simulations of irrigant extrusions, NaOCl should be diluted in the culture medium, to reproduce the expected buffering effect occurring in extrusions. The presence of FBS in culture medium can decrease NaOCl toxicity. There is no standardization of NaOCl cytotoxicity methodologies. This poses the risk of arriving at incorrect results and, therefore, pertinent tests must be refined.

Calcium hypochlorite cytotoxicity mechanism in fibroblasts and effect on osteoblast mineralization.

AIM: To determine the cytotoxicity mechanism of 2.5% calcium hypochlorite [Ca(OCl)2 ] in L929 fibroblasts and the effect of this solution on human osteoblast-like cells (Saos-2) mineralization, compared to that of 2.5% sodium hypochlorite (NaOCl). METHODOLOGY: L929 fibroblasts were exposed to Ca(OCl)2 and NaOCl at different dilutions for 10 min. Cell metabolism was assessed by methyl-thiazole-tetrazolium (MTT); lysosome integrity, by neutral red (NR) assay; type of cell death, by flow cytometry (apoptosis/necrosis); cytoskeleton, by actin and α-tubulin fluorescence and cell ultrastructure, by transmission electron microscopy (TEM). The alkaline phosphatase (ALP) activity and mineralized nodule formation were determined in Saos-2 by thymolphthalein release and alizarin red staining (ARS), respectively. The data were analysed by two-way anova and Bonferroni's post-test (α = .05). RESULTS: Ca(OCl)2 promoted higher cell viability and a lower percentage of apoptosis and necrosis than NaOCl (p < .05). Ca(OCl)2 and NaOCl decreased cell metabolism and lysosome integrity, induced the breakdown of microtubules and actin filaments, promoted alterations of rough endoplasmic reticulum and disruption of mitochondrial cristae. Additionally, Ca(OCl)2 did not induce ALP activity and had no effect on mineralized nodules formation. CONCLUSIONS: Although Ca(OCl)2 and NaOCl promoted the same cytotoxicity mechanism, Ca(OCl)2 was less cytotoxic than NaOCl. As for ALP activity, no differences were observed between NaOCl and Ca(OCl)2 . The production of mineralized nodules induced by Ca(OCl)2 was lower than those induced by NaOCl, but was not different from those induced by the control group.

Recombinant sugarcane cystatin CaneCPI-5 promotes osteogenic differentiation.

Cysteine proteases orchestrate bone remodeling, and are inhibited by cystatins. In reinforcing our hypothesis that exogenous and naturally obtained inhibitors of cysteine proteases (cystatins) act on bone remodeling, we decided to challenge osteoblasts with sugarcane-derived cystatin (CaneCPI-5) for up to 7 days. To this end, we investigated molecular issues related to the decisive, preliminary stages of osteoblast biology, such as adhesion, migration, proliferation, and differentiation. Our data showed that CaneCPI-5 negatively modulates both cofilin phosphorylation at Ser03, and the increase in cytoskeleton remodeling during the adhesion mechanism, possibly as a prerequisite to controlling cell proliferation and migration. This is mainly because CaneCPI-5 also caused the overexpression of the CDK2 gene, and greater migration of osteoblasts. Extracellular matrix remodeling was also evaluated in this study by investigating matrix metalloproteinase (MMP) activities. Our data showed that CaneCPI-5 overstimulates both MMP-2 and MMP-9 activities, and suggested that this cellular event could be related to osteoblast differentiation. Additionally, differentiation mechanisms were better evaluated by investigating Osterix and alkaline phosphatase (ALP) genes, and bone morphogenetic protein (BMP) signaling members. Altogether, our data showed that CaneCPI-5 can trigger biological mechanisms related to osteoblast differentiation, and broaden the perspectives for better exploring biotechnological approaches for bone disorders.

Removal of separated instruments from unfavourable locations: Case reports using the HBW ultrasonic ring or a surgical approach.

Two patients were admitted to the dental clinic to evaluate two right mandibular first molars (both FDI no. 46). In Case 1, there was an accidental instrument separation, which was thought to have been bypassed; however, the instrument was located beyond the apical foramen, in the alveolar bone. The 1-week follow-up revealed that the fragment was close to the inferior alveolar nerve, thus allowing surgical removal to be performed. In Case 2, two separated instruments located in the apical third of the mesiobuccal and mesiolingual canals were removed using the HBW ultrasonic ring coupled to ISO 10 and 15 hand instruments. The 3-month and 1-year follow-ups (Case 1), and the 2-year and 3-year follow-ups (Case 2) showed a favourable evolution in both cases. It can be concluded that both the surgical approach and the HBW ultrasonic ring are viable options for the removal of separated instruments in unfavourable locations.

Endodontic micro-resurgery and guided tissue regeneration of a periapical cyst associated to recurrent root perforation: a case report.

Although the success rates of microsurgery and micro-resurgery are very high, the influence of a recurrent perforation combined with radicular cyst remains unclear. A 21-year-old white female patient had a history of root perforation in a previously treated right maxillary lateral incisor. Analysis using cone-beam computed tomography (CBCT) revealed an extensive and well-defined periapical radiolucency, involving the buccal and palatal bone plate. The perforation was sealed with bioceramic material (Biodentine) in the pre-surgical phase. In the surgical phase, guided tissue regeneration (GTR) was performed by combining xenograft (lyophilized bovine bone) and autologous platelet-rich fibrin applied to the bone defect. The root-end preparation was done using an ultrasonic tip. The retrograde filling was performed using a bioceramic material (Biodentine). Histopathological analysis confirmed a radicular cyst. The patient returned to her referring practitioner to continue the restorative procedures. CBCT analysis after 1-year recall revealed another perforation in the same place as the first intervention, ultimately treated by micro-resurgery using the same protocol with GTR, and a bioceramic material (MTA Angelus). The 2-year recall showed healing and bone neoformation. In conclusion, endodontic micro-resurgery with GTR showed long-term favorable results when a radicular cyst and a recurrent perforation compromised the success.

The Effect of Octenidine on Proliferation, Migration, and Osteogenic Differentiation of Human Dental Pulp and Apical Papilla Stem Cells.

INTRODUCTION: The research for alternative irrigating solutions is ongoing, since no "ideal" solution has yet been found. Octenidine dihydrochloride (OCT) has been indicated as an endodontic irrigant because it has adequate antimicrobial and biological properties. The present study aimed to assess the effects of OCT on proliferation, migration, and induction of the osteogenic phenotype of stem cells from human dental pulp and apical papilla. METHODS: Cells were collected from human third molars and exposed to different doses of OCT, chlorhexidine (CHX), sodium hypochlorite (NaOCl), and ethylenediaminetetraacetic acid (EDTA) to determine cell viability by alamarBlue assay; proliferation by bromodeoxyuridine incorporation; migration by the Transwell assay; alkaline phosphatase activity by thymolphthalein release; and production of mineralized nodules by alizarin red staining. The results were analyzed by 1- or 2-way analysis of variance and Tukey (α = .05). RESULTS: CHX promoted lower cell viability, followed by OCT, NaOCl, and EDTA, especially at intermediate doses (P < .05). Cells exposed to CHX had less proliferation than the other groups (P < .05). The Transwell assay revealed no differences among OCT, EDTA, and culture medium (control group) (P > .05). OCT and EDTA induced greater migration than CHX and NaOCl (P < .05). OCT and EDTA induced higher alkaline phosphatase activity than NaOCl and CHX (P < .05). No difference was detected among the groups using alizarin red staining (P > .05). CONCLUSIONS: OCT induced high migration, proliferation, and alkaline phosphatase activity of stem cells from human dental pulp and apical papilla, which could be advantageous for regenerative endodontic procedures.

Multispecies biofilm removal by a multisonic irrigation system in mandibular molars.

AIM: The aim of the study was to assess biofilm removal efficacy of GentleWave System and passive ultrasonic irrigation (PUI). METHODOLOGY: Twenty-two human mandibular molars with Vertucci's type II configuration in the mesial root were selected. Teeth were autoclaved, inoculated with dental plaque and incubated in a CDC biofilm reactor for two weeks. The mesial roots were instrumented up to 20.06 file (V-Taper) for the GentleWave group and up to 35.04 file (Vortex Blue) for PUI group. Irrigation was performed using GentleWave and PUI irrigation protocols (n = 11). Dentine debris on paper points samples were obtained for quantitative real-time polymerase chain reaction (qPCR) and 16S ribosomal RNA gene sequencing (next-generation aequencing-NGS). For qPCR, a non-parametric test (α = 0.05) was used. Next-generation sequencing data were analysed using mothur, with alpha diversity calculated as the Shannon and Chao1 indices and Bray-Curtis dissimilarities were used for beta diversity. Differences in alpha diversity and abundances of genera were evaluated using Kruskal-Wallis test. Differences in community composition were evaluated using analysis of similarity with Bonferroni correction for multiple comparisons. RESULTS: Quantitative real-time polymerase chain reaction results showed that the reduction estimated in percentages for both groups was equivalent (p > .05). NGS analysis showed that both techniques promoted a significant reduction in reads and OTUs number (p < .05). Shannon alpha diversity and Chao1 index showed no differences between pre- or post-treatment samples for both groups (p > .05). Additionally, pre-treatment communities differed from post-treatment samples in both groups regarding bacterial taxa reduction (ANOSIM R = 0.50 and 0.55, p < .001). CONCLUSIONS: Bacterial reduction in mesial roots of mandibular molars prepared to 35.04 with PUI was similar to those prepared to 20.06 with a multisonic irrigant activation system.

Physicochemical properties and penetration into dentinal tubules of calcium hypochlorite with surfactants.

The aim was to assess the physicochemical properties and the penetration into dentinal tubules of calcium hypochlorite solution [Ca(OCl)2], with or without surfactants. The surfactants benzalkonium chloride, cetrimide, Tween 80 and Triton X-100 were mixed at different concentrations with sodium hypochlorite solution (NaOCl), Ca(OCl)2 and distilled water (control). Once the critical micellar concentration (CMC) of the surfactants in Ca(OCl)2 and NaOCl was determined, pH, free chlorine, surface tension and free calcium ions were evaluated. The penetration into dentinal tubules of NaOCl and Ca(OCl)2, with or without benzalkonium chloride and Triton X-100 [surfactants that promoted the lowest surface tension of Ca(OCl)2], was assessed using human premolars stained with crystal violet. The statistical tests were one-way ANOVA and Tukey's post-test, Kruskal-Wallis and Dunn's post-test, two-way ANOVA and Bonferroni's post-test, and t-test; depending on the assay. The addition of surfactants reduced the surface tension of NaOCl and Ca(OCl)2, and did not alter the pH or the free available chlorine of either solution. The addition of all surfactants increased the availability of free calcium ions in Ca(OCl)2, especially benzalkonium chloride. Ca(OCl)2 exhibited lower penetration into dentinal tubules than NaOCl, and the addition of surfactants did not improve the penetration of Ca(OCl)2, but did increase the penetration of NaOCl. It can be concluded that the addition of surfactants to Ca(OCl)2 did not increase the penetration into dentinal tubules, but it did promote lower surface tension, without changing the pH or free available chlorine values, and higher availability of free calcium ions in Ca(OCl)2.

Physicochemical properties and penetration into dentinal tubules of calcium hypochlorite with surfactants

Abstract The aim was to assess the physicochemical properties and the penetration into dentinal tubules of calcium hypochlorite solution [Ca(OCl)2], with or without surfactants. The surfactants benzalkonium chloride, cetrimide, Tween 80 and Triton X-100 were mixed at different concentrations with sodium hypochlorite solution (NaOCl), Ca(OCl)2 and distilled water (control). Once the critical micellar concentration (CMC) of the surfactants in Ca(OCl)2 and NaOCl was determined, pH, free chlorine, surface tension and free calcium ions were evaluated. The penetration into dentinal tubules of NaOCl and Ca(OCl)2, with or without benzalkonium chloride and Triton X-100 [surfactants that promoted the lowest surface tension of Ca(OCl)2], was assessed using human premolars stained with crystal violet. The statistical tests were one-way ANOVA and Tukey's post-test, Kruskal-Wallis and Dunn's post-test, two-way ANOVA and Bonferroni's post-test, and t-test; depending on the assay. The addition of surfactants reduced the surface tension of NaOCl and Ca(OCl)2, and did not alter the pH or the free available chlorine of either solution. The addition of all surfactants increased the availability of free calcium ions in Ca(OCl)2, especially benzalkonium chloride. Ca(OCl)2 exhibited lower penetration into dentinal tubules than NaOCl, and the addition of surfactants did not improve the penetration of Ca(OCl)2, but did increase the penetration of NaOCl. It can be concluded that the addition of surfactants to Ca(OCl)2 did not increase the penetration into dentinal tubules, but it did promote lower surface tension, without changing the pH or free available chlorine values, and higher availability of free calcium ions in Ca(OCl)2.

Resumo O objetivo foi avaliar as propriedades físico-químicas e a penetrabilidade nos túbulos dentinários da solução de hipoclorito de cálcio [Ca(OCl)2], com ou sem surfactantes. Os surfactantes cloreto de benzalcônio, cetrimida, Tween 80 e Triton X-100 foram misturados em diferentes concentrações com a solução de hipoclorito de sódio (NaOCl), Ca(OCl)2 e água destilada (controle). Uma vez determinada a concentração micelar crítica (CMC) dos surfactantes em Ca(OCl)2 e NaOCl, foram avaliados o pH, cloro livre, tensão superficial e íons de cálcio livre. A penetrabilidade nos túbulos dentinários de NaOCl e Ca(OCl)2, com ou sem cloreto de benzalcônio e Triton X-100 [surfactantes que promoveram a menor tensão superficial de [Ca(OCl)2] foi avaliada utilizando pré-molares humanos corados com cristal violeta. Os testes estatísticos foram ANOVA de uma via e pós-teste de Tukey, Kruskal-Wallis e pós-teste de Dunn, ANOVA de duas vias e pós-teste de Bonferroni, e teste t; dependendo do ensaio. A adição de surfactantes reduziu a tensão superficial do NaOCl e Ca(OCl)2, e não alterou o pH ou cloro livre das soluções. A adição de todos os surfactantes aumentou a disponibilidade de íons de cálcio livre de Ca(OCl)2, principalmente o cloreto de benzalcônio. Ca(OCl)2 apresentou menor penetrabilidade nos túbulos dentinários do que NaOCl, e a adição de surfactantes não aumentou a penetrabilidade de Ca(OCl)2, mas aumentou a penetrabilidade de NaOCl. Pode-se concluir que a adição de surfactantes no Ca(OCl)2 não aumentou a penetrabilidade nos túbulos dentinários, mas promoveu menor tensão superficial, sem alterar os valores de pH ou cloro livre, e maior disponibilidade de íons de cálcio livre em Ca(OCl)2.

Outcomes of the GentleWave system on root canal treatment: a narrative review.

This study aimed to describe the outcomes of the GentleWave system (GW) (Sonendo) on root canal treatment. Published articles were collected from scientific databases (MEDLINE/PubMed platform, Web of Science, Scopus, Science Direct and Embase). A total of 24 studies were collected from August/2014 to July/2021, 20 in vitro and 4 clinical. GW System was not associated with extrusion of the irrigant, promoted faster organic dissolution than conventional syringe irrigation (CSI), passive ultrasonic irrigation (PUI) continuous ultrasonic irrigation (CUI) and EndoVac, reduced more bacterial DNA and biofilm than PUI and CUI, promoted higher penetration of sodium hypochlorite into dentinal tubules than PUI and CUI in vitro, and removed more intracanal medication than CSI and PUI. GW was able to remove pulp tissue and calcifications. Moreover, its ability to remove hard-tissue debris and smear layer was better than that of CSI, and its ability to remove root canal obturation residues was lower or similar to that of PUI, and similar to that of CSI and EndoVac. Regarding root canal obturation of minimally instrumented molar canals, GW was associated with high-quality obturation. Clinically, the success rate of endodontic treatment using GW was 97.3%, and the short-term postoperative pain in the GW group was not different from CSI. Further research, mainly clinical, is needed to establish whether GW has any advantages over other available irrigation methods.

Different formulations of peracetic acid: effects on smear layer removal, dentine erosion, cytotoxicity and antibiofilm activity.

OBJECTIVE: To assess the effects of different peracetic acid (PAA) formulations on smear layer (SL) removal, dentine erosion, cytotoxicity, and antibiofilm activity. METHODOLOGY: SL removal and dentine erosion were assessed using 90 premolars, distributed into six groups, according to final irrigation: PAA formulations (1% Sigma, 1% Bacterend OX, 1% Arposept, and 0.09-0.15% Anioxyde), 17% ethylenediaminetetraacetic acid (EDTA), and water (control). Cytotoxicity was assessed by methyl-thiazol-tetrazolium (MTT) and neutral red assays. Antibacterial and antibiofilm effectiveness was evaluated against Enterococcus faecalis. For cytotoxicity and antibiofilm activity assessment, the 2.5% NaOCl was also included. RESULTS: EDTA, Sigma, and Bacterend OX removed more SL than Arposept, Anioxyde, and water (p<0.05). EDTA caused more severe dentine erosion than Sigma and Bacterend OX (p<0.05). Sigma and Bacterend OX had higher cytotoxicity than the other solutions (p<0.05). NaOCl, Bacterend OX, Sigma, and Anioxyde significantly reduced E. faecalis colony-forming units (CFU) (p<0.05). The 2.5% NaOCl solution promoted greater biofilm biomass reduction (p<0.05) than the other solutions. All PAA formulations promoted greater biomass reduction than 17% EDTA (p<0.05). CONCLUSIONS: Although Sigma and Bacterend OX had higher cytotoxicity, they had a SL removal capability similar to that of EDTA, were as effective as NaOCl against E. faecalis biofilm, and promoted less dentine erosion than EDTA. Arposept and Anioxyde failed to remove the SL, had lower cytotoxicity, and showed less bacterial activity than NaOCl.

Multispecies biofilm removal by XP-endo Finisher and passive ultrasonic irrigation: A scanning electron microscopy study.

The aim was to assess the effect of XP-endo Finisher (XPF) on multispecies biofilm removal, in comparison with passive ultrasonic irrigation (PUI) and conventional syringe irrigation (CSI), by scanning electron microscope (SEM). Fifty mandibular first premolars were instrumented, longitudinally sectioned. The split halves were incubated for 4 days with a broth obtained from three bacteria strains: Enterococcus faecalis, Eikenella corrodens and Streptococcus anginosus. Subsequently, the re-approximated split halves were irrigated with 4% sodium hypochlorite (NaOCl) or water using CSI, and the final irrigation protocols were CSI with 4% NaOCl (CSI+4%NaOCl), PUI+4%NaOCl, XPF+4%NaOCl and CSI+water. The analysis of biofilm removal was performed using SEM images. There were no differences between PUI and XPF (P > 0.05), and both groups promoted higher biofilm removal than CSI+4%NaOCl and CSI+water groups (P < 0.05). It can be concluded the multispecies biofilm removal was significantly improved using XPF and PUI when compared to CSI.

Different formulations of peracetic acid: effects on smear layer removal, dentine erosion, cytotoxicity and antibiofilm activity

Abstract Objective: To assess the effects of different peracetic acid (PAA) formulations on smear layer (SL) removal, dentine erosion, cytotoxicity, and antibiofilm activity. Methodology: SL removal and dentine erosion were assessed using 90 premolars, distributed into six groups, according to final irrigation: PAA formulations (1% Sigma, 1% Bacterend OX, 1% Arposept, and 0.09-0.15% Anioxyde), 17% ethylenediaminetetraacetic acid (EDTA), and water (control). Cytotoxicity was assessed by methyl-thiazol-tetrazolium (MTT) and neutral red assays. Antibacterial and antibiofilm effectiveness was evaluated against Enterococcus faecalis. For cytotoxicity and antibiofilm activity assessment, the 2.5% NaOCl was also included. Results: EDTA, Sigma, and Bacterend OX removed more SL than Arposept, Anioxyde, and water (p<0.05). EDTA caused more severe dentine erosion than Sigma and Bacterend OX (p<0.05). Sigma and Bacterend OX had higher cytotoxicity than the other solutions (p<0.05). NaOCl, Bacterend OX, Sigma, and Anioxyde significantly reduced E. faecalis colony-forming units (CFU) (p<0.05). The 2.5% NaOCl solution promoted greater biofilm biomass reduction (p<0.05) than the other solutions. All PAA formulations promoted greater biomass reduction than 17% EDTA (p<0.05). Conclusions: Although Sigma and Bacterend OX had higher cytotoxicity, they had a SL removal capability similar to that of EDTA, were as effective as NaOCl against E. faecalis biofilm, and promoted less dentine erosion than EDTA. Arposept and Anioxyde failed to remove the SL, had lower cytotoxicity, and showed less bacterial activity than NaOCl.

Influence of voxel size on dentinal microcrack detection by micro-CT after root canal preparation.

The aim of this study was to assess the influence of micro-computed tomography (micro-CT) voxel size on dentinal microcrack detection after root canal preparation using rotary heat-treated nickel-titanium files. Curved mesial root canals (n = 24) of mandibular molars were prepared using ProDesign Logic 30/.05 (PDL) or HyFlex EDM 25/.08 (HEDM). The specimens were scanned by micro-CT at 5 µm voxel size before and after root canal preparation. The percentage of microcracks was evaluated in images at 5, 10 and 20 µm voxel size, by two examiners at two moments. The Kappa and McNemar tests (α = 0.05) were used. The percentage of dentinal microcracks was similar before and after PDL and HEDM preparations, at 10 and 20 µm (p > 0.05). HEDM showed a higher percentage of dentinal microcracks in the middle third at 5 µm after preparation (p < 0.05). The detection of dentinal microcracks before and after instrumentation using PDL was more accurate at 5 µm than at 20 µm, in all thirds (p < 0.05). Within the limitations of this ex vivo study, as expected, the results showed that different resolutions influence the micro-CT analysis of microcracks. The highest accuracy in detecting microcracks was observed for analyses performed at 5 µm voxel size. HyFlex EDM caused even more microcracks to develop in the middle third, detectable only by visualization of images made at 5 µm voxel size.

Accidental Extrusion of Sodium Hypochlorite in a Patient Taking Alendronate: A Case Report With an 8-Year Follow-up.

Extrusion of sodium hypochlorite (NaOCl) is a very rare accident with the most common complications including pain, swelling, and hematoma. It can occur even if procedural guidelines, predisposing conditions, and risk factors are taken into consideration. A 59-year-old female patient was admitted to the endodontics department to treat a left maxillary first premolar (World Dental Federation tooth 24). The medical history included osteoporosis and systemic medication with alendronate. Initially, the diagnosis was "symptomatic irreversible pulpitis" with "normal apical tissues." During instrumentation of the buccal canal, accidental extrusion of 2.5% NaOCl occurred into the periapical tissues, resulting from misinterpretation of the working length, and caused severe pain and bleeding. The canal was immediately flushed using copious irrigation with saline solution. An analgesic and corticosteroid were prescribed. At 3 and 7 days, ecchymosis and slight hematoma were observed extraorally in the area of the affected tooth and an intraoral ulceration at the apex of the affected tooth. At 15 days, minimal signs of ecchymosis were observed, and the treatment was resumed. At 30 days after the accident, there was complete remission of the sequelae. The clinical, radiographic, and tomographic assessment after 1 month, 1 year, and 8 years showed favorable case evolution. During the 8-year follow-up, the patient maintained the systemic use of alendronate. It can be concluded that NaOCl extrusion is an accident that causes patients and clinicians to experience an unpleasant consequence. The radiographic working length should always be determined carefully. A successful outcome can be achieved in patients who take alendronate.

Management of Tooth Discoloration after Orthognathic Surgery Complications: Report of Two Cases

ABSTRACT: Orthognathic surgery is performed for the correction of craniofacial discrepancies. However, complications, such as tooth discoloration are possible. This case report presents two patients who underwent bilateral sagittal split ramus osteotomy associated with segmental Le Fort I osteotomy and genioplasty. During surgeries, the apical region of anterior teeth was accidentally injured in both cases. After three-week surgery follow-up, the injured teeth showed a change in color to dark pink. In both teeth, the root canal treatment was performed followed by the non vital tooth bleaching. Three sessions were necessary to achieve a significant color change of the teeth. The two-year follow-up showed that both teeth preserved an acceptable color. It was concluded that tooth discoloration after orthognathic surgery is a possible complication, which could be overcome following a conservative approach. Additionally, patients should be informed preoperatively.

RESUMEN: La cirugía ortognática es comúnmente realizada para corregir las discrepancias cráneo-faciales. Sin embargo, se pueden producir complicaciones tales como la pigmentación dentaria. Este reporte de casos presenta a dos pacientes que fueron sometidos osteotomía sagital bilateral de la rama mandibular asociada a osteotomía segmentaria Le Fort I y genioplastía. Durante la fase quirúrgica, la región apical de dientes anteriores fueron accidentalmente dañados en ambos casos. Después de tres semanas de seguimiento de la cirugía, los dientes afectados mostraron un cambio de color a rosado oscuro. Se realizó el tratamiento de conductos seguido de aclaramiento interno en ambas piezas dentarias. Fueron necesarias tres sesiones para lograr un cambio de color significativo. El seguimiento de dos años mostró que ambos dientess conservaron un color aceptable. En conclusión, la pigmentación dentaria después de la cirugía ortognática es una posible complicación, sin embargo, puede ser tratada por medio de un enfoque conservador. Además, los pacientes deben ser informados antes de la cirugía.

Influence of voxel size on dentinal microcrack detection by micro-CT after root canal preparation

Abstract The aim of this study was to assess the influence of micro-computed tomography (micro-CT) voxel size on dentinal microcrack detection after root canal preparation using rotary heat-treated nickel-titanium files. Curved mesial root canals (n = 24) of mandibular molars were prepared using ProDesign Logic 30/.05 (PDL) or HyFlex EDM 25/.08 (HEDM). The specimens were scanned by micro-CT at 5 μm voxel size before and after root canal preparation. The percentage of microcracks was evaluated in images at 5, 10 and 20 μm voxel size, by two examiners at two moments. The Kappa and McNemar tests (α = 0.05) were used. The percentage of dentinal microcracks was similar before and after PDL and HEDM preparations, at 10 and 20 μm (p > 0.05). HEDM showed a higher percentage of dentinal microcracks in the middle third at 5 μm after preparation (p < 0.05). The detection of dentinal microcracks before and after instrumentation using PDL was more accurate at 5 μm than at 20 μm, in all thirds (p < 0.05). Within the limitations of this ex vivo study, as expected, the results showed that different resolutions influence the micro-CT analysis of microcracks. The highest accuracy in detecting microcracks was observed for analyses performed at 5 μm voxel size. HyFlex EDM caused even more microcracks to develop in the middle third, detectable only by visualization of images made at 5 μm voxel size.

Physicochemical properties, cytotoxicity and penetration into dentinal tubules of sodium hypochlorite with and without surfactants.

OBJECTIVES: The aim of this study was to assess the physicochemical properties, cytotoxicity and penetration into dentinal tubules of ChlorCid™ Surf (3% sodium hypochlorite [NaOCl] with surfactant) in comparison to ChlorCid™ (3% NaOCl without surfactant). MATERIALS AND METHODS: The physicochemical properties evaluated were pH, surface tension, free available chlorine (FAC) and contact angle. Cytotoxicity was evaluated in L929 fibroblasts exposed to the solutions by 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyl tetrazolium bromide and neutral red assays. Assessment of penetration into dentinal tubules was performed by staining single-rooted permanent human teeth with crystal violet (n = 9), which were irrigated with the solutions and analyzed in cervical, middle and apical segments. Data were analyzed by one-way analysis of variance (ANOVA) and Tukey's post-test, 2-way ANOVA and Bonferroni's post-test or t-test (α = 0.05). RESULTS: ChlorCid™ Surf and ChlorCid™ FAC values were close to those indicated by the manufacturer. ChlorCid™ Surf showed lower surface tension and contact angle on dentin, and higher pH than ChlorCid™ (p < 0.05). The penetration of ChlorCid™ Surf was higher in cervical and middle segments, compared with ChlorCid™ (p < 0.05). There was no difference in irrigant cytotoxicity (p > 0.05). CONCLUSIONS: ChlorCid™ Surf showed lower surface tension, lower contact angle on root canal dentin, higher penetration into dentinal tubules and more alkaline pH, compared with ChlorCid™. However, both solutions showed similar cytotoxicity and FAC content.

Physicochemical Properties of a Bioceramic Repair Material - BioMTA.

This study aimed to assess the physicochemical properties of a repair material in the Brazilian market, BioMTA, in comparison to other two materials currently in use (Biodentine and MTA Angelus). The initial setting time was evaluated using Gillmore needle. The pH was measured with a pH-meter after 24 h, 3, 7, 14 and 21 days. The radiopacity was determined using the equivalence in millimeters of aluminum (mm Al) from digitized occlusal radiographs. Solubility was determined after immersion in water for 7 days. The data were analyzed by one-way ANOVA and Tukey tests (a=0.05). The BioMTA initial setting time (5.2 min) was lower than the other materials (p<0.05). All materials showed an alkaline pH at 21 days. At 24 h, BioMTA was the most alkaline material (p<0.05); and at 3, 7, 14 and 21 days there was no difference between BioMTA and Biodentine (p>0.05), both being more alkaline than MTA Angelus (p<0.05). The radiopacity of BioMTA (4.2 mm Al) was significantly higher compared to Biodentine (p<0.05) and lower than MTA Angelus (p<0.05). The solubility of the materials was -4.2%, -1.6% and 4.1% for BioMTA, MTA Angelus and Biodentine, respectively, with a significant difference between them (p<0.05). Therefore, it can be concluded that BioMTA displayed a shorter setting time, an alkaline pH, a higher radiopacity, and a gain in mass.

Radiopacity of endodontic materials using two models for conversion to millimeters of aluminum.

The aims of the present study were to compare conventional radiography, radiographs digitized with a scanner or photographic camera, and digital radiography, used to evaluate the radiopacity of endodontic materials, and to compare the accuracy of linear and quadratic models used to convert radiopacity values to equivalent millimeters of aluminum (mm Al). Specimens of AH Plus, Endofill, Biodentine and BioMTA materials (n = 8) were radiographed next to an aluminum step-wedge using radiographic films and digital radiography systems (FONA CMOS sensor, Kodak CMOS sensor and photosensitive phosphor plate-PSP). Conventional radiographs were digitized using a scanner or photographic digital camera. Digital images of all the radiographic systems were evaluated using dedicated software. Optical density units (ODU) of the specimens and the aluminum step-wedge were evaluated by a photo-densitometer (PTDM), used in conventional radiographs. The radiopacity in equivalent mm Al of the materials was determined by linear and quadratic models, and the coefficients of determination (R2) values were calculated for each model. Radiopacity of the materials ranged from -9% to 25% for digital systems and digitized radiographs, compared to the PTDM (p < 0.05). The R2 values of the quadratic model were higher than those of the linear model. In conclusion, the FONA CMOS sensor showed the lowest radiopacity variability of the methodologies used, compared with the PTDM, except for the BioMTA group (higher than PTDM). The quadratic model showed higher R2 values than the linear model, thus indicating better accuracy and possible adoption to evaluate the radiopacity of endodontic materials.