Effectiveness and safety of biosilicate-enhanced bleaching gels on enamel with early erosion lesion.

AIM: This study evaluated the efficacy and cytotoxicity of 35% hydrogen peroxide (HP) gel incorporated with 10% (w/w) biosilicate (BioS) on sound enamel and early-stage enamel erosion lesions. METHODS: Discs of enamel/dentin were selected, subjected to erosive cycles (0.3% citric acid, pH 2.6), and treated with (n = 8): HP (35% HP, positive control); HP_BioS [carboxymethyl cellulose (CMC) + HP + BioS]; BioS (CMC + BioS); CMC (negative control). The discs were adapted to artificial pulp chambers with the enamel exposed for bleaching, and the dentin facing toward the culture medium (Dulbecco's modified Eagle's medium [DMEM]). Bleaching was performed in three 30-min sessions at 7-day intervals. After bleaching, the diffusion product (DMEM extract + diffused HP) was pipetted onto MDPC-23 odontoblastic cell line and inoculated. Color parameters (ΔL, Δa, Δb), color change (ΔE00), and changes in whiteness index (ΔWID) were determined before (T0) and after the last bleaching session (T3). Cell viability (MTT, %), H2O2 diffusion (µg/mL), oxidative cell stress (OxS), and cell fluorescence (live/dead assay, in confocal microscopy) were assessed (ANOVA/Tukey; α = 0.05). RESULTS: No difference in ΔL, Δa, Δb, ΔE00, and ΔWID were found between HP and HP_BioS (p > 0.05). The incorporation of BioS decreased the HP diffusion into the substrates and mitigated oxidative stress in early-stage eroded enamel (p < 0.05). HP_BioS presented significantly higher cell viability compared with HP under erosion conditions. Live/dead assay indicated that BioS_HP maintained viability with larger clusters of viable cells. CONCLUSION: Incorporating BioS into HP maintained bleaching effectiveness, favored cell viability, reduced the oxidative stress, and the cytotoxicity in teeth with early-stage erosion. CLINICAL SIGNIFICANCE: BioS formulation showed promising results for reducing cytotoxicity in patients seeking tooth bleaching and presenting undetectable early-stage erosion.

Fracture load and failure mode of semi-direct resin composite occlusal veneers: Influence of design and mechanical cycling.

AIMS: To evaluate the influence of the type of preparation and mechanical cycling on the fracture load and failure mode of semi-direct posterior resin composite restorations. METHODS: In total, 70 healthy third molars were used; 10 belonging to the control group (C - unprepared teeth) and 60 teeth prepared and restored with nanoparticle resin composite, divided into 3 groups (n = 20): O - exclusively occlusal preparation (Table Top); OV - occlusal preparation with buccal extension (Veneerlay); OVP - Occlusal preparation with chamfer on the proximal and buccal-lingual/palatal surfaces (Overlay). The preparations were performed with diamond burs with a thickness of 1 mm. The restorations were made with nanoparticulate resin composite (Filtek Z350 XT) and subsequently received additional polymerization (thermoprocessing). Cementation was performed with the use of universal adhesive system (Single Bond Universal) on dental substrate and dual resin cement (RelyX ARC). Half of the teeth in each group (n = 10) were submitted to mechanical cycling, simulating 6 months of clinical service (5 × 105 fatigue cycles), under dynamic loading of 130 N, at a frequency of 2Hz. Fracture load tests were performed in a universal testing machine with a 200 kgf load cell. Failure mode was classified using scores. Generalized linear models and Fisher Exact tests were applied to the data (significance level of 5%). RESULTS: There were no significant differences between the types of preparation (p = 0.9435), or relative to cycling (p = 0.3764). The Fisher Exact Test showed a significant association between the groups and the type of failure (p = 0.0006), with preparations O (with cycling) and OVP (with and without cycling) exhibiting most failures with restoration fractures without involvement of the dental remnant. CONCLUSIONS: Semi-direct restorations showed resistance to fracture load similar to that of healthy teeth and were capable of withstanding functional masticatory loads. The type of preparation influenced the failure mode of teeth. The Table Top and Overlay types of preparations were those had fewer catastrophic failures, suggesting that since they are more conservative preparations, they made it possible for the tooth to receive a new restorative procedure in the future in cases of failures.

Information sources of Brazilian undergraduate dental students during the COVID-19 outbreak: a cross-sectional study

Aim: This cross-sectional study aimed to investigate where Brazilian dental students seek information about COVID-19 by a self-administered web-based questionnaire. Methods: A social network campaign on Instagram was raised to approach the target population. The dental students responded to a multiple-response question asking where or with whom they get information about COVID-19. The possible answers were government official websites or health and education institutions websites, TV Programs, professors, social media, scientific articles, health professionals, and family members. The data were analyzed by descriptive statistics, and the frequency distributions of responses were evaluated by gender, age, type of institution, and year of enrollment. Results: A total of 833 valid responses were received. The main source of information used by the dental students were government official websites or health and education institutions websites, which were reported by 739 (88.7%) participants. In the sequence, 477 (57.3%) participants chose health professionals while 468 (56.2%) chose scientific articles as information sources. The use of social media was reported by 451 (54.1%) students, while TV programs were information sources used by 332 (39.9%) students. The least used information sources were professors, reported by 317 (38.1%) students, and family members, chosen only by 65 (7.8%) participants. Conclusion: Brazilian dental students rely on multiple information sources to stay informed about COVID-19, mainly focusing their information-seeking behavior on governmental and health professional's websites

Effects of activated charcoal powder combined with toothpastes on enamel color change and surface properties.

AIM: To evaluate the effects of activated charcoal powder (COAL) combined with regular (RT) or whitening (WT) toothpastes on enamel color and surface in comparison to carbamide peroxide (CP). METHODS: Dental blocks (n = 10/group) were randomly divided into COAL, COAL/RT, COAL/WT, CP, CP/RT, CP/WT, RT, WT, and CONT (without treatment). Simulated toothbrushing and whitening treatments were followed by colorimetric (ΔE00 , L*, a*, b*), surface roughness (Ra), and enamel topography assays. ΔE00 was submitted to two-way ANOVA and Tukey test. Color coordinates and Ra were tested with three-way repeated measures ANOVA (α = 5%). RESULTS: COAL exhibited greater ΔE00 than CONT (P = .048), but it did not enhance ΔE00 promoted by RT or WT (P > .05). COAL alone increased Ra (P < .001) and altered enamel topography. COAL did not increase Ra caused by RT and WT (P > .05). CP exhibited the highest ΔE00 (P < .05), but it raised Ra and changed enamel topography to a less extent than COAL. CONCLUSION: Even though charcoal powder did not increase enamel Ra when combined with toothpastes, the topography was negatively impacted by COAL. Also, COAL was unable to enhance the color change of RT and WT, or reach the effectiveness of CP. CLINICAL SIGNIFICANCE: The use of activated charcoal-based product, claimed as a natural whitener, before brushing with toothpastes is not only ineffective to change the color of teeth, but also it might result in alterations on the enamel surface. Whitening with CP, instead, was effective during the same period of treatment, which still represents a more appropriate technique to whiten teeth.

Chemically Soluble Fluoride in Na2FPO3/CaCO3-Based Toothpaste as an Indicator of Fluoride Bioavailability in Saliva during and after Toothbrushing.

The relationship between the concentration of chemically soluble fluoride found in toothpaste and that present in saliva, during and after brushing, was evaluated as an indicator of potentially bioavailable fluoride in toothpaste. Ten adult participants brushed their teeth with the assigned toothpastes: group I: fresh sample of a fluoride toothpaste: Na2FPO3/CaCO3, 1,378 µg F/g of total soluble fluoride (TSF); groups II-IV: aged samples of toothpaste presenting TSF concentrations of 1,160, 900, and 597 µg F/g, respectively; group V: non-F placebo toothpaste. The volunteers brushed their teeth for 1 min with 0.7 g of the toothpaste, all toothbrushing residues (TR) produced were collected, the mouth was rinsed with water, and saliva samples were collected up to 120 min. Total fluoride (TF) and TSF concentrations were determined in TR and in saliva samples using a fluoride ion-selective electrode. TSF concentration (µg F/mL) in TR was determined as an indicator of fluoride bioavailability during toothbrushing and the areas under curves of saliva fluoride concentration versus time (area under the curve, AUC = µg F/mL × min) were calculated as an indicator of fluoride bioavailability after toothbrushing. A significant correlation was found between the TSF concentrations in the toothpastes and the variables TR (r = 0.850; p = 0.0001) and AUC (r = 0.445; p = 0.004). For TF no significant correlation was found for TR (r = -0.099; p = 0.542) and AUC (r = -0.018; p = 0.912). The findings suggest that TSF concentration chemically found in Na2FPO3/CaCO3-based toothpaste could estimate how much fluoride would be bioavailable in saliva when the teeth are brushed.