An Evaluation of Autologous Fat Injection as a Treatment for Velopharyngeal Insufficiency: A Review and Integrated Data Analysis.

BACKGROUND: Velopharyngeal insufficiency (VPI) is a condition characterized by incomplete separation of the oral and nasal cavities during speech production, thereby leading to speech abnormalities and audible nasal emissions. Subsequently, this adversely impacts communication and potentially interpersonal social interactions. Autologous fat grafting (AFG) to the velopharynx, a minimally invasive technique, aims to improve oronasal separation by providing bulk and advancing the posterior pharyngeal wall toward the soft palate. Despite its potential, the relative novelty of AFG in treating VPI has resulted in reporting of inconsistent indications, varied surgical techniques, and mixed outcomes across existing literature. METHODS: This systemic review examined the evidence of AFG for VPI treatment over the past decade (2013-2023). A thorough search across five electronic databases yielded 233 studies, with 20 meeting the inclusion criteria (e.g., utilized fat injection as their selected VPI treatment, conducted study in human subjects, did not perform additional surgical procedure at time of fat injection). Selected studies encompassed patient and surgical intervention characteristics, perceptual speech assessment (PSA) scores, gap sizes, nasalance measurements, and complications. RESULTS: The majority of patients had a prior cleft palate diagnosis (78.2%), in which nasoendoscopy was the prevalent method for visualizing the velopharyngeal port defect. Fat harvesting predominantly occurred from the abdomen (64.3%), with an average injection volume of 6.3 mL across studies. PSA and subjective gap size scores were consistently higher preoperatively than postoperatively. PSA score analysis from seven studies revealed significant and sustained improvements postoperatively. Gap size score analysis from four studies demonstrated similar preoperative and postoperative differences. Complications were reported in 17 studies, yielding a 2.7% summative complication rate among 594 cases. CONCLUSIONS: Autologous fat grafting has emerged as a minimally invasive, safe, and effective treatment for mild to moderate VPI. However, challenges remain because of variability in patient selection criteria, diagnostic modalities, and outcome measurements. This review underscores the need for randomized control trials to directly compare AFG with standard-of-care surgical interventions, providing more conclusive evidence of its clinical efficacy.

Application of 3D Printing in Cleft Lip and Palate Repair.

This manuscript reviews the transformative impact of 3-dimensional (3D) printing technologies in the treatment and management of cleft lip and palate (CLP), highlighting its application across presurgical planning, surgical training, implantable scaffolds, and postoperative care. By integrating patient-specific data through computer-aided design and manufacturing, 3D printing offers tailored solutions that improve surgical outcomes, reduce operation times, and enhance patient care. The review synthesizes current research findings, technical advancements, and clinical applications, illustrating the potential of 3D printing to revolutionize CLP treatment. Further, it discusses the future directions of combining 3D printing with other innovative technologies like artificial intelligence, 4D printing, and in situ bioprinting for more comprehensive care strategies. This paper underscores the necessity for multidisciplinary collaboration and further research to overcome existing challenges and fully utilize the capabilities of 3D printing in CLP repair.

Nasopharyngoscopic Evaluation of Velopharyngeal Closure During Speech.

Definitive oronasal separation through closure of the velopharyngeal (VP) sphincter is necessary for the development of normal speech and feeding. Individuals with velopharyngeal incompetence or insufficiency often exhibit hypernasal speech, poor speech intelligibility, and nasal regurgitation. Assessment of VP sphincter function using nasopharyngoscopy is a key element in identifying VP dysfunction. A foundational understanding of normal anatomy and physiology of the velopharyngeal mechanism is paramount to successful diagnosis. This includes recognition of 4 distinct VP sphincter closure patterns: coronal, sagittal, circular, and circular with Passavant's ridge. In this study, the authors showcase 2 patients with velopharyngeal competence who presented to an ear, nose, and throat clinic for nasopharyngoscopic evaluation. This study sought to demonstrate the use of nasopharyngoscopy to recognize velopharyngeal closure patterns and discuss how they may influence the surgical management of VP dysfunction.

Elucidating the Benefit of Perforated vs Non-Perforated Membranes in Guided Bone Regeneration: An in Vivo Histologic Evaluation and Histomorphometric Analysis.

Background: Non-perforated Polytetrafluoroethylene (PTFE) membranes are effectively utilized in guided bone regeneration (GBR) but may hinder cell migration due to limited interaction with the periosteum. This study compared bone regeneration using occlusive or perforated membranes combined with acellular collagen sponge (ACS) and recombinant human bone morphogenic protein-2 (rhBMP-2) in a canine mandibular model. Material and Methods: Male beagle dogs (n=3) received two mandibular defects each to compare ACS/rhBMP-2 with experimental (perforated group) and control (non-perforated group) membranes (n=3 defects/group). Tissue healing was assessed histomorphologically, histomorphometrically and through volumetric reconstruction using microcomputed tomography. Results: The perforated group showed increased bone formation and reduced soft tissue formation compared to the non-perforated group. For the primary outcome, histomorphometric analysis revealed significantly greater total regenerated bone in the perforated group (67.08 ± 6.86%) relative to the nonperforated group (25.18 ± 22.44%) (p = 0.036). Perforated membranes had less soft tissue infiltration (32.91 ± 6.86%) compared to non-perforated membranes (74.82 ± 22.44%) (p = 0.036). Conclusion: The increased permeability of membranes in the perforated group potentially enabled periosteal precursor cells greater accessibility to rhBMP-2. The availability may have accelerated their differentiation into mature bone-forming cells, contributing to the stimulation of new bone production, relative to the non-perforated group.

Development of ZTA (80% Al2O3/20% ZrO2) pre-sintered blocks for milling in CAD/CAM systems.

The present work aims to develop a production method of pre-sintered zirconia-toughened-alumina (ZTA) composite blocks for machining in a computer-aided design and computer-aided manufacturing (CAD-CAM) system. The ZTA composite comprised of 80% Al2O3 and 20% ZrO2 was synthesized, uniaxially and isostatically pressed to generate machinable CAD-CAM blocks. Fourteen green-body blocks were prepared and pre-sintered at 1000 °C. After cooling and holder gluing, a stereolithography (STL) file was designed and uploaded to manufacture disk-shaped specimens projected to comply with ISO 6872:2015. Seventy specimens were produced through machining of the blocks, samples were sintered at 1600 °C and two-sided polished. Half of the samples were subjected to accelerated autoclave hydrothermal aging (20h at 134 °C and 2.2 bar). Immediate and aged samples were characterized by scanning electron microscopy (SEM) and X-ray diffraction (XRD). Optical and mechanical properties were assessed by reflectance tests and by biaxial flexural strength test, Vickers indentation and fracture toughness, respectively. Samples produced by machining presented high density and smooth surfaces at SEM evaluation with few microstructural defects. XRD evaluation depicted characteristic peaks of alpha alumina and tetragonal zirconia and autoclave aging had no effect on the crystalline spectra of the composite. Optical and mechanical evaluations demonstrated a high masking ability for the composite and a characteristic strength of 464 MPa and Weibull modulus of 17, with no significant alterations after aging. The milled composite exhibited a hardness of 17.61 GPa and fracture toughness of 5.63 MPa m1/2, which remained unaltered after aging. The synthesis of ZTA blocks for CAD-CAM was successful and allowed for the milling of disk-shaped specimens using the grinding method of the CAD-CAM system. ZTA composite properties were unaffected by hydrothermal autoclave aging and present a promising alternative for the manufacture of infrastructures of fixed dental prostheses.

3D printed ß-tricalcium phosphate versus synthetic bone mineral scaffolds: A comparative in vitro study of biocompatibility.

BACKGROUND: ß-tricalcium phosphate (ß-TCP) has been successfully utilized as a 3D printed ceramic scaffold in the repair of non-healing bone defects; however, it requires the addition of growth factors to augment its regenerative capacity. Synthetic bone mineral (SBM) is a novel and extrudable carbonate hydroxyapatite with ionic substitutions known to facilitate bone healing. However, its efficacy as a 3D printed scaffold for hard tissue defect repair has not been explored. OBJECTIVE: To evaluate the biocompatibility and cell viability of human osteoprecursor (hOP) cells seeded on 3D printed SBM scaffolds via in vitro analysis. METHODS: SBM and ß-TCP scaffolds were fabricated via 3D printing and sintered at various temperatures. Scaffolds were then subject to qualitative cytotoxicity testing and cell proliferation experiments utilizing (hOP) cells. RESULTS: SBM scaffolds sintered at lower temperatures (600 °C and 700 °C) induced greater levels of acute cellular stress. At higher sintering temperatures (1100 °C), SBM scaffolds showed inferior cellular viability relative to ß-TCP scaffolds sintered to the same temperature (1100 °C). However, qualitative analysis suggested that ß-TCP presented no evidence of morphological change, while SBM 1100 °C showed few instances of acute cellular stress. CONCLUSION: Results demonstrate SBM may be a promising alternative to ß-TCP for potential applications in bone tissue engineering.

A rhPDGF-BB/bovine type I collagen/ß-TCP mixture for the treatment of critically sized non-union tibial defects: An in vivo study in rabbits.

Non-union during healing of bone fractures affects up to ~5% of patients worldwide. Given the success of recombinant human platelet-derived growth factor-B chain homodimer (rhPDGF-BB) in promoting angiogenesis and bone fusion in the hindfoot and ankle, rhPDGF-BB combined with bovine type I collagen/ß-TCP matrix (AIBG) could serve as a viable alternative to autografts in the treatment of non-unions. Defects (~2 mm gaps) were surgically induced in tibiae of skeletally mature New Zealand white rabbits. Animals were allocated to one of four groups-(1) negative control (empty defect, healing for 8 weeks), (2 and 3) acute treatment with AIBG (healing for 4 or 8 weeks), and (4) chronic treatment with AIBG (injection 4 weeks post defect creation and then healing for 8 weeks). Bone formation was analyzed qualitatively and semi-quantitatively through histology. Samples were imaged using dual-energy X-ray absorptiometry and computed tomography for defect visualization and volumetric reconstruction, respectively. Delayed healing or non-healing was observed in the negative control group, whereas defects treated with AIBG in an acute setting yielded bone formation as early as 4 weeks with bone growth appearing discontinuous. At 8 weeks (acute setting), substantial remodeling was observed with higher degrees of bone organization characterized by appositional bone growth. The chronic healing, experimental, group yielded bone formation and remodeling, with no indication of non-union after treatment with AIBG. Furthermore, bone growth in the chronic healing group was accompanied by an increased presence of osteons, osteonal canals, and interstitial lamellae. Qualitatively and semiquantitatively, chronic application of AI facilitated complete bridging of the induced non-union defects, while untreated defects or defects treated acutely with AIBG demonstrated a lack of complete bridging at 8 weeks.

Sensor-based systems for the measurement of Functional Reach Test results: a systematic review.

The measurement of Functional Reach Test (FRT) is a widely used assessment tool in various fields, including physical therapy, rehabilitation, and geriatrics. This test evaluates a person's balance, mobility, and functional ability to reach forward while maintaining stability. Recently, there has been a growing interest in utilizing sensor-based systems to objectively and accurately measure FRT results. This systematic review was performed in various scientific databases or publishers, including PubMed Central, IEEE Explore, Elsevier, Springer, the Multidisciplinary Digital Publishing Institute (MDPI), and the Association for Computing Machinery (ACM), and considered studies published between January 2017 and October 2022, related to methods for the automation of the measurement of the Functional Reach Test variables and results with sensors. Camera-based devices and motion-based sensors are used for Functional Reach Tests, with statistical models extracting meaningful information. Sensor-based systems offer several advantages over traditional manual measurement techniques, as they can provide objective and precise measurements of the reach distance, quantify postural sway, and capture additional parameters related to the movement.

Nonthermal Atmospheric Pressure Plasma Treatment of Endosteal Implants for Osseointegration and Antimicrobial Efficacy: A Comprehensive Review.

The energy state of endosteal implants is dependent on the material, manufacturing technique, cleaning procedure, sterilization method, and surgical manipulation. An implant surface carrying a positive charge renders hydrophilic properties, thereby facilitating the absorption of vital plasma proteins crucial for osteogenic interactions. Techniques to control the surface charge involve processes like oxidation, chemical and topographical adjustments as well as the application of nonthermal plasma (NTP) treatment. NTP at atmospheric pressure and at room temperature can induce chemical and/or physical reactions that enhance wettability through surface energy changes. NTP has thus been used to modify the oxide layer of endosteal implants that interface with adjacent tissue cells and proteins. Results have indicated that if applied prior to implantation, NTP strengthens the interaction with surrounding hard tissue structures during the critical phases of early healing, thereby promoting rapid bone formation. Also, during this time period, NTP has been found to result in enhanced biomechanical fixation. As such, the application of NTP may serve as a practical and reliable method to improve healing outcomes. This review aims to provide an in-depth exploration of the parameters to be considered in the application of NTP on endosteal implants. In addition, the short- and long-term effects of NTP on osseointegration are addressed, as well as recent advances in the utilization of NTP in the treatment of periodontal disease.

Sustained Release of Salicylic Acid for Halting Peri-Implantitis Progression in Healthy and Hyperglycemic Systemic Conditions: A Gottingen Minipig Model.

To develop a peri-implantitis model in a Gottingen minipig and evaluate the effect of local application of salicylic acid poly(anhydride-ester) (SAPAE) on peri-implantitis progression in healthy, metabolic syndrome (MS), and type-2 diabetes mellitus (T2DM) subjects. Eighteen animals were allocated to three groups: (i) control, (ii) MS (diet for obesity induction), and (iii) T2DM (diet plus streptozotocin for T2DM induction). Maxillary and mandible premolars and first molar were extracted. After 3 months of healing, four implants per side were placed in both jaws of each animal. After 2 months, peri-implantitis was induced by plaque formation using silk ligatures. SAPAE polymer was mixed with mineral oil (3.75 mg/µL) and topically applied biweekly for up to 60 days to halt peri-implantitis progression. Periodontal probing was used to assess pocket depth over time, followed by histomorphologic analysis of harvested samples. The adopted protocol resulted in the onset of peri-implantitis, with healthy minipigs taking twice as long to reach the same level of probing depth relative to MS and T2DM subjects (∼3.0 mm), irrespective of jaw. In a qualitative analysis, SAPAE therapy revealed decreased levels of inflammation in the normoglycemic, MS, and T2DM groups. SAPAE application around implants significantly reduced the progression of peri-implantitis after ∼15 days of therapy, with ∼30% lower probing depth for all systemic conditions and similar rates of probing depth increase per week between the control and SAPAE groups. MS and T2DM conditions presented a faster progression of the peri-implant pocket depth. SAPAE treatment reduced peri-implantitis progression in healthy, MS, and T2DM groups.

Direct inkjet writing of polylactic acid/ß-tricalcium phosphate composites for bone tissue regeneration: A proof-of-concept study.

There is an ever-evolving need of customized, anatomic-specific grafting materials for bone regeneration. More specifically, biocompatible and osteoconductive materials, that may be configured dynamically to fit and fill defects, through the application of an external stimulus. The objective of this study was to establish a basis for the development of direct inkjet writing (DIW)-based shape memory polymer-ceramic composites for bone tissue regeneration applications and to establish material behavior under thermomechanical loading. Polymer-ceramic (polylactic acid [PLA]/ß-tricalcium phosphate [ß-TCP]) colloidal gels were prepared of different w/w ratios (90/10, 80/20, 70/30, 60/40, and 50/50) through polymer dissolution in acetone (15% w/v). Cytocompatibility was analyzed through Presto Blue assays. Rheological properties of the colloidal gels were measured to determine shear-thinning capabilities. Gels were then extruded through a custom-built DIW printer. Space filling constructs of the gels were printed and subjected to thermomechanical characterization to measure shape fixity (Rf) and shape recovery (Rr) ratios through five successive shape memory cycles. The polymer-ceramic composite gels exhibited shear-thinning capabilities for extrusion through a nozzle for DIW. A significant increase in cellular viability was observed with the addition of ß-TCP particles within the polymer matrix relative to pure PLA. Shape memory effect in the printed constructs was repeatable up to 4 cycles followed by permanent deformation. While further research on scaffold macro-/micro-geometries, and engineered porosities are warranted, this proof-of-concept study suggested suitability of this polymer-ceramic material and the DIW 3D printing workflow for the production of customized, patient specific constructs for bone tissue engineering.

Three-Dimensional Printing Methods for Bioceramic-Based Scaffold Fabrication for Craniomaxillofacial Bone Tissue Engineering.

Three-dimensional printing (3DP) technology has revolutionized the field of the use of bioceramics for maxillofacial and periodontal applications, offering unprecedented control over the shape, size, and structure of bioceramic implants. In addition, bioceramics have become attractive materials for these applications due to their biocompatibility, biostability, and favorable mechanical properties. However, despite their advantages, bioceramic implants are still associated with inferior biological performance issues after implantation, such as slow osseointegration, inadequate tissue response, and an increased risk of implant failure. To address these challenges, researchers have been developing strategies to improve the biological performance of 3D-printed bioceramic implants. The purpose of this review is to provide an overview of 3DP techniques and strategies for bioceramic materials designed for bone regeneration. The review also addresses the use and incorporation of active biomolecules in 3D-printed bioceramic constructs to stimulate bone regeneration. By controlling the surface roughness and chemical composition of the implant, the construct can be tailored to promote osseointegration and reduce the risk of adverse tissue reactions. Additionally, growth factors, such as bone morphogenic proteins (rhBMP-2) and pharmacologic agent (dipyridamole), can be incorporated to promote the growth of new bone tissue. Incorporating porosity into bioceramic constructs can improve bone tissue formation and the overall biological response of the implant. As such, employing surface modification, combining with other materials, and incorporating the 3DP workflow can lead to better patient healing outcomes.

Performance Evaluation of Computer Vision Algorithms in a Programmable Logic Controller: An Industrial Case Study.

This work evaluates the use of a programmable logic controller (PLC) from Phoenix Contact's PLCnext ecosystem as an image processing platform. PLCnext controllers provide the functions of "classical" industrial controllers, but they are based on the Linux operating system, also allowing for the use of software tools usually associated with computers. Visual processing applications in the Python programming language using the OpenCV library are implemented in the PLC using this feature. This research is focused on evaluating the use of this PLC as an image processing platform, particularly for industrial machine vision applications. The methodology is based on comparing the PLC's performance against a computer using standard image processing algorithms. In addition, a demonstration application based on a real-world scenario for quality control by visual inspection is presented. It is concluded that despite significant limitations in processing power, the simultaneous use of the PLC as an industrial controller and image processing platform is feasible for applications of low complexity and undemanding cycle times, providing valuable insights and benchmarks for the scientific community interested in the convergence of industrial automation and computer vision technologies.

Osseointegration of implant surfaces in metabolic syndrome and type-2 diabetes mellitus.

This in vivo study evaluated the bone healing response around endosteal implants with varying surface topography/chemistry in a preclinical, large transitional model induced with metabolic syndrome (MS) and type-2 diabetes mellitus (T2DM). Fifteen Göttingen minipigs were randomly distributed into two groups: (i) control (normal diet, n = 5) and (ii) O/MS (cafeteria diet for obesity induction, n = 10). Following obesity induction, five minipigs from the obese/metabolic syndrome (O/MS) group were further allocated, randomly, into the third experimental group: (iii) T2DM (cafeteria diet + streptozotocin). Implants with different surface topography/chemistry: (i) dual acid-etched (DAE) and (ii) nano-hydroxyapatite coating over the DAE surface (NANO), were placed into the right ilium of the subjects and allowed to heal for 4 weeks. Histomorphometric evaluation of bone-to-implant contact (%BIC) and bone area fraction occupancy (%BAFO) within implant threads were performed using histomicrographs. Implants with NANO surface presented significantly higher %BIC (~26%) and %BAFO (~35%) relative to implants with DAE surface (%BIC = ~14% and %BAFO = ~28%, p < .025). Data as a function of systemic condition presented significantly higher %BIC (~28%) and %BAFO (~42%) in the control group compared with the metabolically compromised groups (O/MS: %BIC = 14.35% and %BAFO = 26.24%, p < .021; T2DM: %BIC = 17.91% and %BAFO = 26.12%, p < .021) with no significant difference between O/MS and T2DM (p > .05). Statistical evaluation considering both factors demonstrated significantly higher %BIC and %BAFO for the NANO surface relative to DAE implant, independent of systemic condition (p < .05). The gain increase of %BIC and %BAFO for the NANO compared with DAE was more pronounced in O/MS and T2DM subjects. Osseointegration parameters were significantly reduced in metabolically compromised subjects compared with healthy subjects. Nanostructured hydroxyapatite-coated surfaces improved osseointegration relative to DAE, regardless of systemic condition.

Mobile Data Gathering and Preliminary Analysis for the Functional Reach Test.

The functional reach test (FRT) is a clinical tool used to evaluate dynamic balance and fall risk in older adults and those with certain neurological diseases. It provides crucial information for developing rehabilitation programs to improve balance and reduce fall risk. This paper aims to describe a new tool to gather and analyze the data from inertial sensors to allow automation and increased reliability in the future by removing practitioner bias and facilitating the FRT procedure. A new tool for gathering and analyzing data from inertial sensors has been developed to remove practitioner bias and streamline the FRT procedure. The study involved 54 senior citizens using smartphones with sensors to execute FRT. The methods included using a mobile app to gather data, using sensor-fusion algorithms like the Madgwick algorithm to estimate orientation, and attempting to estimate location by twice integrating accelerometer data. However, accurate position estimation was difficult, highlighting the need for more research and development. The study highlights the benefits and drawbacks of automated balance assessment testing with mobile device sensors, highlighting the potential of technology to enhance conventional health evaluations.

Combinatorial effects between aromatic plant compounds and chlorhexidine digluconate against canine otitis-related Staphylococcus spp.

The increasing prevalence of antimicrobial resistance among bacterial pathogens necessitates novel treatment strategies, particularly in veterinary medicine where otitis in dogs is very common in small animals' clinical routines. Considering this challenge, this study explores the efficacy of aromatic plant compounds (APC), including eugenol (EUG), trans-cinnamaldehyde (TC), and geraniol (GER), and their synergistic potential when combined with the antiseptic agent chlorhexidine (CLX), offering insight into alternative therapeutic approaches. The disk diffusion assay revealed differential sensitivity of Staphylococcus spp. strains to the tested compounds, with EUG and GER showing moderate inhibition zones and TC displaying considerably larger inhibition zones. Further analysis through MIC and MBC determinations suggested that EUG required the highest concentrations to inhibit and kill the bacteria, whereas TC and GER were effective at lower concentrations. Combined with CLX, all three plant-derived compounds demonstrated a significant enhancement of antibacterial activity, indicated by reduced MIC values and a predominantly synergistic interaction across the strains tested. GER was the most potent in combination with CLX, presenting the lowest mean FICi values and the highest fold reductions in MIC. This study emphasizes the APC's potential as an adjunct to conventional antimicrobial agents like CLX. The marked synergy observed, especially with GER, suggests that such combinations could be promising alternatives in managing bacterial otitis in dogs, potentially mitigating the impact of antibiotic resistance.

Antibacterial effectiveness of trans-cinnamaldehyde against foodborne Enterobacteriaceae and its adjuvant effect with gentamicin.

The Enterobacteriaceae family is recognized as a primary group of Gram-negative pathogens responsible for foodborne illnesses and is frequently associated with antibiotic resistance. The present study explores the natural-based compound trans-cinnamaldehyde (TC) against drug-resistant Enterobacteriaceae and its synergism with gentamicin (GEN) to address this issue. The research employs three strains of Escherichia coli, Klebsiella pneumoniae, and Enterobacter cloacae, previously isolated from shrimp. The antibacterial activity was evaluated by the disk diffusion method, microdilution test, kinetics of growth, and time-kill curve. In addition, the synergistic effect between TC/GEN was investigated by checkerboard assay. All strains showed sensitivity to TC with an inhibition zone diameter > 35 mm. The TC showed inhibitory and bactericidal action in the most tested bacteria around 625 µg/mL. Sub-inhibitory amounts (1/2 and 1/4 MIC) of TC interfered with the growth kinetics by lag phase extension and decreased the log phase. Time-kill curves show a reduction of viable cells after the first hour of TC treatment at bactericidal concentrations. The synergistic effect between TC/GEN was observed for E. coli and E. cloacae strains with FICi ranging from 0.15 to 0.50. These findings, therefore, suggest TC as a promising alternative in the fight against drug-resistant Enterobacteriaceae that can cause foodborne illnesses.

Idiopyrgus souleyetianus (Gastropoda: Tomichiidae) as an intermediate host of the liver fluke Amphimerus sp. (Trematoda: Opisthorchiidae) in Brazil.

Despite the importance of fish-borne trematodes of the family Opisthorchiidae as causative agents of human liver fluke disease, studies on these parasites outside Asia are relativally scarce. In South America, human focus of amphimerosis is known in Ecuador since the mid-20th century, and Amphimerus spp. have also been reported in wild and domestic mammals. Nevertheless, the knowledge on the snails that act as the first intermediate host of these potentially zoonotic parasites are scarce. Herein, a new cercaria of the pleurolophocercous morphotype found in the freshwater snail Idiopyrgus souleyetianus from Brazil was subjected to morphological and molecular studies. Multigene phylogenetic analyses based on 28S, 5.8S-ITS-2 and Cox-1 sequences enabled the identification of Amphimerus sp., a species distinct from that reported in humans from Ecuador. This cercariae was morphologically compared with other opisthorchiid cercariae known. The possible occurrence of human amphimerosis in Brazil is discussed.

Prevalence of helmintic infections in Brazilian Maxakali indigenous: a repeated cross-sectional design.

BACKGROUND: The prevalence of intestinal parasites is known to be high among Amerindian populations; further, there are serious problems in the healthcare of these populations in Brazil. The Maxakali, located in the northeastern region of Minas Gerais, Brazil, is an indigenous group that still preserves many of its cultural aspects. This study aimed to compare the positivity rate of schistosomiasis and soil-transmitted helminths in this ethnic group in epidemiological surveys conducted in 1972 and 2014. METHODS: Stool parasitological examinations were performed by the Kato-Katz technique during both periods in this population. In 2014, the parasitological diagnosis was also realized with the TF-Test® technique. RESULTS: In 1972, 270 inhabitants were examined. The positivity rates were 67.4% for Schistosoma mansoni, 72.9% for hookworms, 43.7% for Ascaris lumbricoides, and 23.7% for Trichuris trichiura. In 2014, 545 individuals were examined, and the positivity rates obtained were 45.7% for S. mansoni, 22.8% for hookworms, 0.6% for A. lumbricoides, and 2.8% for T. trichiura. CONCLUSIONS: The comparison of the parasitological surveys conducted in 1972 and 2014, indicates that the indigenous Maxakali remained neglected by the health and indigenous protection authorities during these four decades. The infection rate observed in 2014 for schistosomiasis and hookworm remains high, considering the current epidemiological view of these diseases in the Brazilian population.

How nursing practice environments limit implicit rationing of care and nurse-assessed adverse events: the role of flow at work.

BACKGROUND: The nursing practice environment is beneficial in curbing implicit rationing of nursing care and adverse patient events. However, the underlying mechanisms of these relationships remain unexplored. AIM: To test whether flow at work mediates the relationship between the nursing practice environment, implicit rationing of nursing care, and nurse-assessed adverse patient events. METHODS: This cross-sectional study involved 231 nurses from five hospitals in Port Said, Egypt. The participants completed Arabic-translated versions of the Practice Environment Scale of the Nursing Work Index, the Work-Related Flow Inventory, the Perceived Implicit Rationing of Nursing Care instrument, and the Adverse Patient Events scale. Structural equation modeling was used to test the hypothetical model. RESULTS: The favorable nursing practice environment positively predicted nurses' flow at work (ß = 0.64, p < 0.001), while inversely predicting implicit rationing of nursing care (ß = -0.23, p = 0.014) and adverse patient events (ß = -0.35, p < 0.001). Nurses' flow at work inversely predicted implicit rationing of nursing care (ß = -0.30, p = 0.002) and adverse patient events (ß = -0.29, p = 0.002). Moreover, nurses' flow at work acted as a mediator, linking the nursing practice environment to the rationing of nursing care and adverse patient events, with 500 bootstrap results for the indirect effects (ß = -0.24, p = 0.001, 95% CI: -0.43 to -0.09; and ß = -0.44, p = 0.003, 95% CI: -0.79 to -0.16, respectively). CONCLUSION: Nurses working in a favorable nursing practice environment are more likely to experience flow at work, limiting implicit rationing of nursing care and adverse patient events. IMPLICATIONS FOR NURSING MANAGEMENT: Nursing administrators should strive to create a healthy nursing practice environment to foster nurses' flow and thereby reduce the frequency of implicit rationing of nursing care and adverse patient events.