A Facile Strategy for the Preparation of N-Doped TiO2 with Oxygen Vacancy via the Annealing Treatment with Urea.

Although titanium dioxide (TiO2) has a wide range of potential applications, the photocatalytic performance of TiO2 is limited by both its limited photoresponse range and fast recombination of the photogenerated charge carriers. In this work, the preparation of nitrogen (N)-doped TiO2 accompanied by the introduction of oxygen vacancy (Vo) has been achieved via a facile annealing treatment with urea as the N source. During the annealing treatment, the presence of urea not only realizes the N-doping of TiO2 but also creates Vo in N-doped TiO2 (N-TiO2), which is also suitable for commercial TiO2 (P25). Unexpectedly, the annealing treatment-induced decrease in the specific surface area of N-TiO2 is inhibited by the N-doping and, thus, more active sites are maintained. Therefore, both the N-doping and formation of Vo as well as the increased active sites contribute to the excellent photocatalytic performance of N-TiO2 under visible light irradiation. Our work offers a facile strategy for the preparation of N-TiO2 with Vo via the annealing treatment with urea.

Mixed Metal Oxide W-TiO2 Nanopowder for Environmental Process: Synergy of Adsorption and Photocatalysis.

A mixed metal oxide W-TiO2 nanopowder photocatalyst was prepared by using the sol-gel method with a broad range of elemental compositions x = CW/(CW + CTi), including TiO2 and WO3. The material was structurally characterized and evaluated in adsorption and photocatalytic processes by testing its removal capacity of a representative pollutant methylene blue (MB) in aqueous solutions and under UV-A and sunlight illuminations. The nanopowders appeared to be more effective adsorbents than pure TiO2 and WO3 materials, showing a maximum at 15 mol% W, which was set as the tungsten solubility limit in anatase titania. At the same time, the photocatalytic decomposition of MB peaked at 2 mol% W. The examination of different compositions showed that the most effective MB removal took place at 15 mol% W, which was attributed to the combined action of adsorption and heterogeneous photocatalysis. Moreover, MB decomposition under sunlight was stronger than under UV-A, suggesting photocatalyst activation by visible light. The pollutant removal efficiency of the material with 15 mol% W was enhanced by a factor of ~10 compared to pure TiO2 at the beginning of the process, which shows its high potential for use in depollution processes in emergency cases of a great pollutant leak. As a result, a Wx=0.15-TiO2 catalyst could be of high interest for wastewater purification in industrial plants.

Engineering Directional Charge Carrier Transport Using Ferroelectric Polarization for Enhanced Photoelectrochemical Water Oxidation.

Introducing ferroelectric polarization has shown great potential to facilitate interfacial charge separation in photoelectrochemical (PEC) water splitting. However, unambiguous evidence of the actual influence of spontaneous ferroelectric polarization, as compared to heterojunction formation, on electron extraction and PEC water splitting is still lacking to date. Herein, core-shell BaTiO3/TiO2 nanostructures are designed as photoanodes based on paraelectric cubic and ferroelectric tetragonal phases BaTiO3 (BTO) perovskite. The cubic and tetragonal crystalline phases are stabilized using selected elaboration methods. Compared to the paraelectric cubic (c-BTO), the ferroelectric tetragonal (t-BTO) leads to a favorable ferroelectric polarization, enhancing directional charge separation and as a consequence to increased photocurrent up to a factor of 1.95. More interestingly, the charge separation efficiency can be tuned by applying positive or negative polarization, with the highest charge separation obtained for the positive one. When loading Ni(OH)2 as a cocatalyst on the t-BTO@TiO2 photoanode, the Ni(OH)2/TiO2/t-BTO exhibits a high performance and superior stability toward PEC water oxidation with a photocurrent almost 6.7 times that of the reference SiO2@TiO2. The proposed facilitation may open an avenue to engineer charge separation and transport for high-performance PEC water oxidation.

Highly Dispersed Ni-Pt Bimetallic Cocatalyst: The Synergetic Effect Yields Pt-Like Activity in Photocatalytic Hydrogen Evolution.

Achieving high photocatalytic activity with the lowest possible platinum (Pt) consumption is crucial for reducing the cost of Pt-based cocatalysts and enabling large-scale applications. Bimetallic Ni-Pt cocatalysts exhibit excellent photocatalytic performance and are considered one of the most promising photocatalysts capable of replacing pure Pt for hydrogen evolution reaction (HER). However, the synergistic photocatalytic mechanism between bimetallic Ni-Pt cocatalysts needs to be further investigated. Herein, we deposit highly dispersed Ni-Pt bimetallic cocatalysts on the surface of TiO2 by radiolytic reduction. We study the dynamics of photogenerated charge carriers of the Ni-Pt-comodified TiO2 and propose their underlying electron transfer mechanisms, in which Pt acts as an electron trap, whereas Ni serves as an electron supplier. The synergistic effect is Ni/Pt ratio-dependent and can confer bimetallic Ni-Pt to pure Pt-like photocatalytic activity in HER. The Ni2-Pt1-comodified TiO2 is optimized to be the most cost-effective photocatalyst with robust stability, which exhibits about 40-fold higher performance than bare TiO2.

The property-governed activity of silver-modified titania photocatalysts: The influence of titania matrix.

Commercial titania photocatalysts were modified with silver nanoparticles (NPs) by the photodeposition method in the presence/absence of methanol. The obtained photocatalysts were characterized by XRD, XPS, diffuse reflectance spectroscopy, STEM, and time-resolved microwave conductivity (TRMC) methods. The photocatalytic activity was tested under UV/vis irradiation for (i) methanol dehydrogenation (during silver deposition), (ii) oxygen evolution with in situ silver deposition, and (iii) oxidative decomposition of acetic acid, as well as under vis irradiation for 2-propanol oxidation. The action spectra of 2-propanol oxidation were also performed. It has been confirmed that modification of titania with silver causes significant improvement of photocatalytic activity under both UV and vis irradiation as silver works as an electron scavenger (TRMC data) and vis activator (possibly by an energy transfer mechanism). The obtained activities differ between titania samples significantly, suggesting that the type of crystalline phase, particle/crystallite sizes, and electron traps' density are crucial for both the properties of formed silver deposits and resultant photocatalytic activity. It might be concluded that, under UV irradiation, (i) high crystallinity and large specific surface area are recommended for rutile- and anatase-rich samples, respectively, during hydrogen evolution, (ii) mixed crystalline phases cause a high rate of oxygen evolution from water, and (iii) anatase phase with fine silver NPs results in efficient decomposition of acetic acid, whereas under vis irradiation the aggregated silver NPs (broad localized surface plasmon resonance peak) on the rutile phase are promising for oxidation reactions.

Facile Vacuum Annealing-Induced Modification of TiO2 with an Enhanced Photocatalytic Performance.

In this work, the photocatalytic performance enhancement of hydrothermally prepared TiO2 was achieved by facile vacuum annealing treatment. Calcination of TiO2 powder in air (CA-TiO2) maintained its white color, while gray powder was obtained when the annealing was performed under vacuum (CV-TiO2). Fourier transform infrared, total organic carbon, X-ray photoelectron spectroscopy, and electron paramagnetic resonance analyses proved that vacuum annealing transformed ethanol adsorbed on the surface of TiO2 into carbon-related species accompanied by the formation of surface oxygen vacancies (Vo). The residual carbon-related species on the surface of CV-TiO2 favored its adsorption of organic dyes. Compared with TiO2 and CA-TiO2, CV-TiO2 exhibited an improved charge carrier separation with surface Vo as trapping sites for electrons. Vacuum annealing-induced improvement of crystallinity, enhancement of adsorption capacity, and formation of surface Vo contributed to the excellent photocatalytic activity of CV-TiO2, which was superior to that of commercial TiO2 (P25, Degussa). Obviously, vacuum annealing-triggered decomposition of ethanol played an important role in the modification of TiO2. In the presence of ethanol, vacuum annealing was also suitable for the introduction of Vo into P25. Therefore, the current work offers an easy approach for the modification of TiO2 to enhance its photocatalytic performance by facile vacuum annealing in the presence of ethanol.

Virtually Transparent TiO2/Polyelectrolyte Thin Multilayer Films as High-Efficiency Nanoporous Photocatalytic Coatings for Breaking Down Formic Acid and for Escherichia coli Removal.

Virtually transparent photocatalytic multilayer films composed of TiO2 nanoparticles and polyelectrolytes were built on model surfaces using layer-by-layer assembly and investigated as photocatalytic nanoporous coatings. Formic acid (HCOOH) and Escherichia coli were used as models for the degradation of gaseous pollutants and for studying antibacterial properties. Positively charged TiO2 nanoparticles were coassembled with negatively charged poly(sodium 4-styrenesulfonate) (NaPSS) which leads to highly transparent nanoscale coatings in which the content of TiO2 particles is controlled mainly by the number of deposition cycles and the enhanced translucency with respect to titania powders is likely due to the presence of the polyelectrolytes in the interstitial space between the particles. Build-up and structural properties of the films were determined by ellipsometry, quartz crystal microbalance (QCM-D, with dissipation monitoring), and UV-vis spectrophotometry in transmission and scanning electron microscopy. Complementary photophysical and activity tests of (PSS/TiO2)n multilayer films were performed in the gas-phase under UV-A light and revealed a peculiar dependence on the number of layer pairs (LPs), corresponding to a clear deviation from the usual observations in photocatalysis with increasing TiO2 amounts. Most notably, a single LP film showed a strongly enhanced HCOOH mineralization and outperformed films with a higher number of LPs, with respect to the quantity of TiO2 catalyst present in the films. It is believed that the high quantum yield (8.1%) of a coating consisting of a single TiO2 layer which is 6-7 times higher than that of a 6-10 LP film could be due to the optimum accessibility of the TiO2 crystallites toward both HCOOH and water molecules. In thicker films, while no detrimental light screening was observed with increasing the number of LPs, diffusion phenomena could cap the efficiency of the access of the pollutant and water to the catalytic surface. Unlike for HCOOH mineralization, three PSS/TiO2 LPs were required for observing a maximum antibacterial activity of the nanocomposite coatings. This is likely due to the fact that micrometer-sized E. coli bacteria do not enter into the interstitial space between the TiO2 particles and require a different surface morphology with respect to the number of active contact points for optimum degradation.

Heterojunction of CuO nanoclusters with TiO2 for photo-oxidation of organic compounds and for hydrogen production.

Heterojunctions of small CuO nanoclusters (synthesized by radiolysis) with TiO2 (commercial P25) induced a photocatalytic activity under visible light irradiation in a wide range of wavelengths due to the narrow bandgap of CuO nanoclusters of around 1.7 eV. The optical, chemical, and electrical properties of these composite nanomaterials were studied. The photocatalytic properties of bare and modified TiO2-P25 were studied for water purification (photooxidation of organic compounds such as phenol and 2-propanol) and for hydrogen generation under visible light irradiation. Time resolved microwave conductivity signals showed activation of TiO2 under visible light, proving the injection of electrons from CuO nanoclusters to the conduction band of TiO2-P25. The modified materials showed high photocatalytic activity under visible light. The important role of charge-carriers was demonstrated for both photoreduction and photooxidation reactions.

A soft-chemistry assisted strong metal-support interaction on a designed plasmonic core-shell photocatalyst for enhanced photocatalytic hydrogen production.

Engineering photocatalysts based on gold nanoparticles (AuNPs) has attracted great attention for the solar energy conversion due to their multiple and unique properties. However, boosting the photocatalytic performance of plasmonic materials for H2 generation has some limitations. In this study, we propose a soft-chemistry method for the preparation of a strong metal-support interaction (SMSI) to enhance the photocatalytic production of H2. The TiO2 thin overlayer covering finely dispersed AuNPs (forming an SMSI) boosts the photocatalytic generation of hydrogen, compared to AuNPs deposited at the surface of TiO2 (labelled as a classical system). The pathway of the charge carriers' dynamics regarding the system configuration is found to be different. The photogenerated electrons are collected by AuNPs in a classical system and act as an active site, while, unconventionally, they are injected back in the titania surface for an SMSI photocatalyst making the system highly efficient. Additionally, the adsorption energy of methanol, theoretically estimated using the density functional theory (DFT) methodology, is lower for the soft-chemistry SMSI photocatalyst accelerating the kinetics of photocatalytic hydrogen production. The SMSI obtained by soft-chemistry is an original concept for highly efficient photocatalytic materials, where the photon-to-energy conversion remains a major challenge.

Octahedral Anatase Titania as Efficient Photocatalyst: Influence of Preparation Conditions.

Octahedral anatase particles (OAPs) belonging to faceted titania photocatalysts exhibit one of the highest photocatalytic activities among various titania photocatalysts, probably due to hindered recombination of charge carriers resulting from low content of defects (recombination centers). In this study, OAPs have been examined for oxidative decomposition of acetic acid, dehydrogenation of methanol and bacteria inactivation. OAPs were prepared from partly protonated potassium nanowires by hydrothermal reaction (HT) at various experimental conditions, i.e., the influences of HT temperature and content of reaction reagents were studied in detail. The morphology, composition and crystal structure of the products were characterized by scanning electron microscopy (SEM), powder X-ray diffraction (XRD), transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS), diffuse reflectance spectroscopy (DRS) and time-resolved microwave conductivity (TRMC) method. It was found that all parameters during HT influenced simultaneously the morphology of obtained products, and even slight change in one of them could result in significant change in the properties, and thus photocatalytic activities. Moreover, it was shown that titania morphology was a key-factor for photocatalytic activity for decomposition of both organic compounds and microorganisms. Although, an imperfection in octahedral shape (semi-OAPs) did not influence the efficiently for decomposition of organic compounds, it had tremendous negative impact on antimicrobial performance, probably due to hindered adsorption of bacterial cells on the photocatalyst surface (preferential on {101} facets).

Influence of Semiconductor Morphology on Photocatalytic Activity of Plasmonic Photocatalysts: Titanate Nanowires and Octahedral Anatase Nanoparticles.

Octahedral anatase particles (OAP) with eight exposed and thermodynamically most stable (101) facets were prepared by an ultrasonication-hydrothermal (US-HT) reaction from potassium titanate nanowires (TNW). The precursor (TNW) and the product (OAP) of US-HT reaction were modified with nanoparticles of noble metals (Au, Ag or Pt) by photodeposition. Samples were characterized by X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), diffuse reflectance spectroscopy (DRS), scanning transmission electron microscopy (STEM) and time-resolved microwave conductivity (TRMC). The photocatalytic activity was investigated in three reaction systems, i.e., anaerobic dehydrogenation of methanol and oxidative decomposition of acetic acid under UV/vis irradiation, and oxidation of 2-propanol under vis irradiation. It was found that hydrogen liberation correlated with work function of metals, and thus the most active were platinum-modified samples. Photocatalytic activities of bare and modified OAP samples were much higher than those of TNW samples, probably due to anatase presence, higher crystallinity and electron mobility in faceted NPs. Interestingly, noble metals showed different influence on the activity depending on the semiconductor support, i.e., gold-modified TNW and platinum-modified OAP exhibited the highest activity for acetic acid decomposition, whereas silver- and gold-modified samples were the most active under vis irradiation, respectively. It is proposed that the form of noble metal (metallic vs. oxidized) as well as the morphology (well-organized vs. uncontrolled) have a critical effect on the overall photocatalytic performance. TRMC analysis confirmed that fast electron transfer to noble metal is a key factor for UV activity. It is proposed that the efficiency of plasmonic photocatalysis (under vis irradiation) depends on the oxidation form of metal (zero-valent preferable), photoabsorption properties (broad localized surface plasmon resonance (LSPR)), kind of metal (silver) and counteraction of "hot" electrons back transfer to noble metal NPs (by controlled morphology and high crystallinity).

Plasmonic photocatalysis applied to solar fuels.

The induction of chemical processes by plasmonic systems is a rapidly growing field with potentially many strategic applications. One of them is the transformation of solar energy into chemical fuel by the association of plasmonic metal nanoparticles (M NPs) and a semi-conductor (SC). When the localized surface plasmon resonance (LSPR) and the SC absorption do not match, one limitation of these systems is the efficiency of hot electron transfer from M NPs to SC through the Schottky barrier formed at the M NP/SC interfaces. Here we show that high surface area 1 wt% Au/TiO2-UV100, prepared by adsorption of a NaBH4-protected 3 nm gold sol, readily catalyzes the photoreduction of carbon dioxide with water into methane under both solar and visible-only irradiation with a CH4vs. H2 selectivity of 63%. Tuning Au NP size and titania surface area, in particular via thermal treatments, highlights the key role of the metal dispersion and of the accessible Au-TiO2 perimeter interface on the direct SC-based solar process. The impact of Au NP density in turn provides evidence for the dual role of gold as co-catalyst and recombination sites for charge carriers. It is shown that the plasmon-induced process contributes up to 20% of the solar activity. The plasmon-based contribution is enhanced by a large Au NP size and a high degree of crystallinity of the SC support. By minimizing surface hydroxylation while retaining a relatively high surface area of 120 m2 g-1, pre-calcining TiO2-UV100 at 450 °C leads to an optimum monometallic system in terms of activity and selectivity under both solar and visible irradiation. A state-of-the-art methane selectivity of 100% is achieved in the hot electron process.

Noble metal-modified faceted anatase titania photocatalysts: Octahedron versus decahedron.

Octahedral anatase particles (OAP, with eight equivalent {101} facets) and decahedral anatase particles (DAP, with two additional {001} facets) were modified with nanoparticles of noble metals (Au, Ag, Cu). The titania morphology, expressed by the presence of different arrangements of exposed crystal facets, played a key role in the photocatalytic properties of metal-modified faceted titania. In the UV/vis systems, two-faceted configuration of DAP was more favorable for the reaction efficiency than single-faceted OAP because of an efficient charge separation described by the transfer of electrons to {101} facets and holes to {001} facets. Time-resolved microwave conductivity (TRMC) and reversed double-beam photoacoustic spectroscopy (RDB-PAS) confirmed that distribution of electron traps (ET) and mobility of electrons were key-factors of photocatalytic activity. In contrast, metal-modified OAP samples had higher photocatalytic activity than metal-modified DAP and metal-modified commercial titania samples under visible light irradiation. This indicates that the presence of single type of facets ({101}) is favorable for efficient electron transfer via shallow ET, whereas intrinsic properties of DAP result in fast charge carriers' recombination when gold is deposited on {101} facets (migration of "hot" electrons: Au→{101}→Au).

Plasmonic core-shell nanostructure as an optical photoactive nanolens for enhanced light harvesting and hydrogen production.

Hydrogen production using plasmonic photocatalyst has attracted increasing attention since it improves light harvesting and photoefficiency. Herein, we have designed a plasmonic photocatalyst in a core-shell nanostructure that enabled an improvement of light harvesting and photocatalytic production of hydrogen using a very low amount of gold nanoparticles. The core-shell nanostructure was found to mimic the focusing of light observed for the lens-like epidermal cells. Thus, the core-shell nanostructure acts as a convex nanolens to reinforce the electromagnetic field at the nanostructure surface. The electric field was also found to be enhanced, which improves the energy absorbed for gold particles located in the core-shell nanostructure. Thus, by adjusting the diameter of the core-shell nanostructure, an optimal intensity for the localized surface plasmon resonance of gold was obtained. Tuning the size of the core-shell nanostructure enabled to improve the absorption at the reactive surface, thus increasing the photocatalytic hydrogen production efficiency by 5-fold.

Laser synthesized TiO2-based nanoparticles and their efficiency in the photocatalytic degradation of linear carboxylic acids.

Titanium dioxide nanoparticles were synthesized by laser pyrolysis, their surface and electronic properties were modified by gold and/or nitrogen. These materials were characterized by different techniques like X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS) and electron paramagnetic resonance (EPR). Time resolved conductivity (TRMC) was used to study the charge separation of electron/hole pairs. Altogether (XPS, EPR, TRMC), the physicochemical characterizations are well correlated with chemical photoactivity of the different samples. Their photocatalytic activity was evaluated for the degradation of linear carboxylic acids (C2-C3) under UV and visible illumination. The decomposition rate of acids was measured, it shows that the modification with gold increases the photoactivity while the presence of nitrogen slows down the process. Such observations are in good agreement with evolution of TRMC signals. A degradation pathway has been determined by identification of intermediate products by chromatography and EPR, results show different intermediate species. In particular EPR confirms the presence of NO2- paramagnetic centers and shows two novel N centered paramagnetic centers. A decrease of the degradation rate is observed with increase of carboxylic acid chain length.

Influence of Nitrogen Doping on Device Operation for TiO2-Based Solid-State Dye-Sensitized Solar Cells: Photo-Physics from Materials to Devices.

Solid-state dye-sensitized solar cells (ssDSSC) constitute a major approach to photovoltaic energy conversion with efficiencies over 8% reported thanks to the rational design of efficient porous metal oxide electrodes, organic chromophores, and hole transporters. Among the various strategies used to push the performance ahead, doping of the nanocrystalline titanium dioxide (TiO2) electrode is regularly proposed to extend the photo-activity of the materials into the visible range. However, although various beneficial effects for device performance have been observed in the literature, they remain strongly dependent on the method used for the production of the metal oxide, and the influence of nitrogen atoms on charge kinetics remains unclear. To shed light on this open question, we synthesized a set of N-doped TiO2 nanopowders with various nitrogen contents, and exploited them for the fabrication of ssDSSC. Particularly, we carefully analyzed the localization of the dopants using X-ray photo-electron spectroscopy (XPS) and monitored their influence on the photo-induced charge kinetics probed both at the material and device levels. We demonstrate a strong correlation between the kinetics of photo-induced charge carriers probed both at the level of the nanopowders and at the level of working solar cells, illustrating a direct transposition of the photo-physic properties from materials to devices.

Versatile Wafer-Scale Technique for the Formation of Ultrasmooth and Thickness-Controlled Graphene Oxide Films Based on Very Large Flakes.

We present a new strategy to form thickness-adjusted and ultrasmooth films of very large and unwrinkled graphene oxide (GO) flakes through the transfer of both hemispherical and vertical water films stabilized by surfactants. With its versatility in terms of substrate type (including flexible organic substrates) and in terms of flake density (from isolated flakes to continuous and multilayer films), this wafer-scale assembly technique is adapted to a broad range of experiments involving GO and rGO (reduced graphene oxide). We illustrate its use through the evaluation of transparent rGO electrodes.

Morphology-dependent photocatalytic activity of octahedral anatase particles prepared by ultrasonication-hydrothermal reaction of titanates.

Octahedral anatase particles (OAPs) were prepared by an ultrasonication (US)-hydrothermal (HT) reaction of partially proton-exchanged potassium titanate nanowires (TNWs). The structural/physical properties of OAP-containing samples, including specific surface area, crystallinity, crystallite size, particle aspect ratio, composition and total OAP content, were analyzed. Photocatalytic activities of samples were measured under irradiation (>290 nm) for oxidative decomposition of acetic acid (CO2 system) and dehydrogenation of methanol (H2 system) under aerobic and deaerated conditions, respectively. Total density of electron traps (ETs) was measured by double-beam photoacoustic spectroscopy (DB-PAS). Mobility and lifetime of charge carriers (electrons) were investigated by the time-resolved microwave conductivity (TRMC) method. The effects of synthesis parameters, i.e., HT duration, HT temperature and US duration, on properties and photocatalytic activities of final products were examined in detail. The sample prepared with 1 h US duration and 6 h HT duration at 433 K using 267 mg of TNWs in 80 mL of Milli-Q water exhibited the highest photocatalytic activity. It was found that change in HT duration or HT temperature while keeping the other conditions the same resulted in changes in all properties and photocatalytic activity. On the other hand, duration of US treatment, before HT reaction, influenced the morphology of both the reagent (by TNWs breaking) and final products (change in total OAP content); samples prepared with various US durations exhibited almost the same structural/physical properties evaluated in this study but were different in morphology and photocatalytic activity. This enabled clarification of the correlation between morphology and photocatalytic activity, i.e., the higher the total OAP content was, the higher was the level of photocatalytic activity, especially in the CO2 system. Although the decay after maximum TRMC signal intensity (Imax) was almost constant for all samples used in this study, photocatalytic activities were roughly proportional to Imax, which tended to be proportional to total OAP content. Assuming that Imax corresponds to the product of density of electrons in mobile shallow ETs and their mobility, the results suggest that OAP particles have beneficial shallow ETs in higher density and thereby the OAP content governs the photocatalytic activities. Thus, morphology-dependent photocatalytic activity of OAP-containing particles was reasonably interpreted by density of ETs presumably located on the exposed {101} facets.

Modification of TiO2 by Bimetallic Au-Cu Nanoparticles for Wastewater Treatment.

Au, Cu and bimetallic Au-Cu nanoparticles were synthesized on the surface of commercial TiO2 compounds (P25) by reduction of the metal precursors with tetrakis (hydroxymethyl) phosphonium chloride (THPC) (0.5 % in weight). The alloyed structure of Au-Cu NPs was confirmed by HAADF-STEM, EDS, HRTEM and XPS techniques. The photocatalytic properties of the modified TiO2 have been studied for phenol photodegradation in aqueous suspensions under UV-visible irradiation. The modification by the metal nanoparticles induces an increase in the photocatalytic activity. The highest photocatalytic activity is obtained with Au-Cu/TiO2 (Au/Cu 1:3). Their electronic properties have been studied by time resolved microwave conductivity (TRMC) to follow the charge-carrier dynamics. TRMC measurements show that the TiO2 modification with Au, Cu and Au-Cu nanoparticles plays a role in charge-carrier separations increasing the activity under UV-light. Indeed, the metal nanoparticles act as a sink for electron, decreasing the charge carrier recombination. The TRMC measurements show also that the bimetallic Au-Cu nanoparticles are more efficient in electron scavenging than the monometallic Au and Cu ones.

Phenol photodegradation on platinized-TiO2 photocatalysts related to charge-carrier dynamics.

Three commercial TiO2 compounds (Degussa P25, Sachtleben UV100, and Millenium PC50) and their platinized forms have been studied by the time-resolved microwave conductivity (TRMC) method to follow their charge-carrier dynamics and to relate it to the photocatalytic activity for phenol degradation in TiO2 aqueous suspensions. The degradation reaction has been studied in detail, following the time evolution of the concentration of phenol and its intermediates by liquid chromatography. The results show that platinization has a distinct influence on the commercial compounds, decreasing globally the activity of P25 and increasing the activity of PC50 and UV100. An influence of charge-carrier lifetimes on the photoactivity of pure and platinized TiO2 samples has been evidenced.