Cotton functionalized with nanostructured TiO2-Ag-AgBr layer for solar photocatalytic degradation of dyes and toxic organophosphates.

The functionalization of cotton fabric with photoactive TiO2-Ag-AgBr nanostructured layer has been successfully developed using a low temperature non-aqueous sol-gel route and aqueous suspension of AgBr. Evidence for the growth of TiO2 layer and the immobilization of AgBr nanoparticles have been confirmed by Raman, XRD and XPS. GSDR analysis revealed a strong absorption in the visible region brought by surface Plasmon resonance (SPR) of Ag nanocrystals generated at the surface of AgBr. The XPS evidenced the presence of Ag+, Ag0 and bromine, suggesting that Ag0 formed a shell around the deposited AgBr. The immobilized TiO2-Ag-AgBr heterostructured layer imparts a strong photocatalytic activity under visible light for the degradation of dyes in aqueous solution as well as of dimethyl methylphosphonate (DMMP), a chemical warfare agent simulant. These new catalytically active functionalized fabrics, with self-detoxification properties, have great potential for application in chemical protective clothes and might offer new opportunities for the design of functional materials for toxic chemical protection.

Chitosan-Ag-TiO2 films: An effective photocatalyst under visible light.

Aiming the degradation of harmful molecules under visible light, new photocatalytic systems were created. For this purpose, the surface of chitosan thin films was modified in heterogeneous phase via a simple and straightforward mild chemical process: chemisorption of silver ions followed by the synthesis in situ of TiO2 at low temperature (100 °C). A high photocatalytic activity under visible light was observed, leading to the degradation and/or mineralization of different organic products such as o-toluidine, salicylic acid and 4-aminomethyl benzoic acid. This efficiency is partly attributed to the formation of Ag NPs and also to the unexpected appearance of AgCl NPs, likely formed from the residual chlorine contained in the chitosan. The resulting TiO2/Ag/AgCl/Chitosan system is easy to prepare under mild conditions, avoiding calcination treatments and opens new perspectives for the production of visible light-driven photocatalysts. Samples were analysed by different techniques: XRD, Raman, FE-SEM, XPS, TGA, GSDR, LIF and LIP.

Functionalization of cotton fabrics with plasmonic photo-active nanostructured Au-TiO2 layer.

A simple approach to functionalize cotton fabrics with Au and TiO2 nanostructured layer is presented. Hybrid fabrics (Cot-Au-TiO2) are prepared through reduction of AuCl4- on cotton, followed by a non-aqueous sol-gel procedure using tetrabutyltitanate and a hydrothermal treatment at 110°C. The generation of crystalline TiO2 is confirmed by Raman spectroscopy. The fibres morphology and their roughness are characterized by AFM and FE-SEM. XPS shows how the concentration of the NPs precursors (Au and TiO2) affects the layer composition. GSDR (Ground State Diffuse Reflectance Absorption Spectroscopy) and LIL (Laser induced luminescence) reveal a strong quenching effect induced by Au NPs. Photocatalytic activity measured through the Remazol Blue (RB) degradation reveals an enhancement under visible light, which increases with Au loading. This strong enhancement is explained through the surface plasmon resonance brought by Au NPs.

Porphyrin dye into biopolymeric chitosan films for localized photodynamic therapy of cancer.

Porphyrins and some of its derivatives are well known and widely used as photosensitizers (PSs) for Photodynamic Therapy of Cancer (PDT). The present study regards the characterization and evaluation of a synthesized asymmetric porphyrin dye in solution to be used as PS for PDT. This molecule was also incorporated into biopolymeric films composed by chitosan, polyethylene glycol (PEG) and gelatin in order to overtake some of the disadvantages inherent to the PS, but more important, to evaluate the potential of a system composed by the porphyrin/biopolymer to be applied as localized therapeutic agents. FTIR spectroscopy showed a strong interaction between the polymers involved in the preparation of the films under study: film 1: chitosan, film 2: chitosan/PEG and film 3: chitosan/gelatin. Photochemical studies were performed for the dye in solution and into the three different biopolymeric films. Ground state absorption showed the characteristic bands of these kinds of dyes in solution and also incorporated into the films. The films composed by porphyrin/chitosan and porphyrin into chitosan/gelatin, revealed the presence of non-emissive aggregates exhibiting a strong quenching effect in the fluorescence intensity, quantum yields and lifetimes. In this way, the system composed by the porphyrin incorporated into the chitosan/PEG film presents the best fluorescence quantum yield and lifetime. The transient absorption spectra were obtained for all the systems indicating the formation of an excited triplet state of the porphyrins following excitation, which takes special importance in the generation of phototoxic species namely singlet oxygen. Singlet oxygen quantum yields were also determined and the results obtained were very promising for the dye in solution but also for the dye into the different substrates. The release of the dye from the three different films onto a buffer solution was evaluated and we conclude that after a few days the dye was completely released by the substrates in acidic conditions. Confocal microscopy was used for the determination of the intracellular localization of the compound under study onto HeLa cells (human cervical cancer cells line). The evaluation of the PSs anticancer activity assumes special importance for PDT studies. The system should be less toxic in the dark and more active when irradiated, therefore, toxicity in the dark and phototoxicity studies onto HeLa cells were performed.

Controlled growth of Cu2O nanoparticles bound to cotton fibres.

A green, safe and fast procedure is presented for in situ generation of nanoparticles (NPs) of cuprous oxide (Cu2O) onto cotton fibres at room temperature using water as a solvent. The method is based on a mild surface oxidation of cellulose fibres to generate in a controlled way carboxylic groups acting as a binding site for the adsorption of Cu(2+) via electrostatic coordination. Then, the adsorbed Cu(2+) ions were readly converted into Cu2O by dipping the treated cotton fibres into a aqueous solution of a reducing agent. Field-emission scanning electron microscopy (FE-SEM), X-ray photoelectron spectroscopy (XPS) and X-ray diffraction (XRD), as well as UV-vis absorption and emission spectroscopic methods were used to analyse the size, morphology, chemical composition and the crystalline structure of the generated nanoparticles on the fabrics. The morphology of the ensuing Cu2O nanoparticles was shown to be dependent on the reduycing agent used. Antibacterial properties of the modified fibres were also investigated.

Portuguese tin-glazed earthenware from the 17th century. Part 2: A spectroscopic characterization of pigments, glazes and pastes of the three main production centers.

Sherds representative of the three Portuguese faience production centers of the 17th century - Lisbon, Coimbra and Vila Nova were studied with the use of mostly non-invasive spectroscopies, namely: ground state diffuse reflectance absorption (GSDR), micro-Raman, Fourier-transform infrared (FT-IR) and proton induced X-ray (PIXE) or X-ray fluorescence emission (XRF). X-ray diffraction (XRD) experiments were also performed. The obtained results evidence a clear similarity in the pastes of the pottery produced Vila Nova and some of the ceramic pastes from Lisbon, in accordance with documental sources that described the use of Lisbon clays by Vila Nova potters, at least since mid 17th century. Quartz and Gehlenite are the main components of the Lisbon's pastes, but differences between the ceramic pastes were detected pointing out to the use of several clay sources. The spectroscopic trend exhibited Coimbra's pottery is remarkably different, Quartz and Diopside being the major components of these pastes, enabling one to well define a pattern for these ceramic bodies. The blue pigment from the Lisbon samples is a cobalt oxide that exists in the silicate glassy matrix, which enables the formation of detectable cobalt silicate microcrystals in most productions of the second half of the 17th century. No micro-Raman cobalt blue signature could be detected in the Vila Nova and Coimbra blue glazes. This is in accordance with the lower kiln temperatures in these two production centers and with Co(2+) ions dispersed in the silicate matrix. In all cases the white glaze is obtained with the use of tin oxide. Hausmannite was detected as the manganese oxide mineral used to produce the purple glaze (wine color "vinoso") in Lisbon.

Photochemical properties of squarylium cyanine dyes.

This study presents several new squarylium dyes derived from benzothiazole and benzoselenazole with several structural variations, namely the nature of the heteroaromatic ring and the length of the N,N'-dialkyl groups. Before being investigated in connection with their effect on living cells and/or tissues, these novel compounds were characterized, namely with respect to the determination of their main photophysical parameters. Therefore, a study of the ground state absorption, fluorescence emission (quantum yields and lifetimes) and singlet oxygen generation quantum yields was performed for all the compounds synthesized in order to evaluate their efficiency as photosensitizers. An increase of the alkyl chain length from ethyl to hexyl did not produce a clear change in the fluorescence quantum yields, showing no influence on the photoisomerization process. Heavy atom inclusion (Se instead of S) enhanced the singlet oxygen generation efficiency and decreased the intensity of the fluorescence emission. The external heavy atom effect (I(-) as a counterion instead of CF3SO3(-)) produced a significant increase in the singlet oxygen formation quantum yield (about 20%). Transient absorption studies in aerated and oxygen free samples revealed that the photoisomerization process, which could compete with the triplet state formation for all dyes in solution, is a negligible pathway for the excited state deactivation, in accordance with the rigidity introduced by the squaric ring into the polymethine chain of the dye, both in chloroform and ethanol. However, in the case of the chloroform solution a new transient was detected in air equilibrated solutions, resulting from a reaction of the excited squarylium dye in the singlet state with CHCl3˙, and assigned to the radical cation (SQ(+)˙) of the dye.

Variable-column bubble oxygenator. A new system for bubble oxygenation.

A new bubble oxygenator has been developed. Its main advantage is that the dimensions of the oxygenating chamber can be varied. Thus, the capacity for oxygenation may be adapted to different patients. It was used in 2,700 open-heart operations performed at the Institut do Coracão, Faculdade de Medicina, Universidade de São Paulo, between January, 1971, and December, 1973. A group of 50 patients were subjected to more detailed studies. We found that the average hemolysis was 38.67 mg. per cent with a mean perfusion duration of 69 minutes, 38 seconds. Fibrinogen and platelet concentrations decreased by 14 and 25 per cent, respectively. The pH, PcO2, PO2, and base excess before and after cardiopulmonary bypass ranged within normal levels, and oxygenation (PO2) was always satisfactory.