Electrochemical Methods for Water Purification, Ion Separations, and Energy Conversion.

Agricultural development, extensive industrialization, and rapid growth of the global population have inadvertently been accompanied by environmental pollution. Water pollution is exacerbated by the decreasing ability of traditional treatment methods to comply with tightening environmental standards. This review provides a comprehensive description of the principles and applications of electrochemical methods for water purification, ion separations, and energy conversion. Electrochemical methods have attractive features such as compact size, chemical selectivity, broad applicability, and reduced generation of secondary waste. Perhaps the greatest advantage of electrochemical methods, however, is that they remove contaminants directly from the water, while other technologies extract the water from the contaminants, which enables efficient removal of trace pollutants. The review begins with an overview of conventional electrochemical methods, which drive chemical or physical transformations via Faradaic reactions at electrodes, and proceeds to a detailed examination of the two primary mechanisms by which contaminants are separated in nondestructive electrochemical processes, namely electrokinetics and electrosorption. In these sections, special attention is given to emerging methods, such as shock electrodialysis and Faradaic electrosorption. Given the importance of generating clean, renewable energy, which may sometimes be combined with water purification, the review also discusses inverse methods of electrochemical energy conversion based on reverse electrosorption, electrowetting, and electrokinetic phenomena. The review concludes with a discussion of technology comparisons, remaining challenges, and potential innovations for the field such as process intensification and technoeconomic optimization.

Characterizing chemical signaling between engineered "microbial sentinels" in porous microplates.

Living materials combine a material scaffold, that is often porous, with engineered cells that perform sensing, computing, and biosynthetic tasks. Designing such systems is difficult because little is known regarding signaling transport parameters in the material. Here, the development of a porous microplate is presented. Hydrogel barriers between wells have a porosity of 60% and a tortuosity factor of 1.6, allowing molecular diffusion between wells. The permeability of dyes, antibiotics, inducers, and quorum signals between wells were characterized. A "sentinel" strain was constructed by introducing orthogonal sensors into the genome of Escherichia coli MG1655 for IPTG, anhydrotetracycline, L-arabinose, and four quorum signals. The strain's response to inducer diffusion through the wells was quantified up to 14 mm, and quorum and antibacterial signaling were measured over 16 h. Signaling distance is dictated by hydrogel adsorption, quantified using a linear finite element model that yields adsorption coefficients from 0 to 0.1 mol m-3 . Parameters derived herein will aid the design of living materials for pathogen remediation, computation, and self-organizing biofilms.

Continuous Separation of Radionuclides from Contaminated Water by Shock Electrodialysis.

The increasing popularity of nuclear energy necessitates development of new methods to treat water that becomes contaminated with radioactive substances. Because this polluted water comprises several dissolved species (not all of which are radioactive), selective accumulation of the radionuclides is desirable to minimize the volume of nuclear waste and to facilitate its containment or disposal. In this article, we use shock electrodialysis to selectively, continuously, and efficiently remove cobalt and cesium from a feed of dissolved lithium, cobalt, cesium, and boric acid. This formulation models the contaminated water commonly found in light-water reactors and in other nuclear processes. In a three-pass process, a consistent trade-off is observed between the recovery of decontaminated water and the percentage of cobalt removed, which offers flexibility in operating the system. For example, 99.5% of cobalt can be removed with a water recovery of 43%, but up to 66% of the water can be recovered if deionization of cobalt is allowed to drop to 98.3%. In general, the energy consumed during this process (ranging between 1.76 and 4.8 kW h m-3) is low because only charged species are targeted and virtually no energy is expended removing boric acid, the most abundant species in solution.

Active control of viscous fingering using electric fields.

Viscous fingering is a widely observed phenomenon, in which finger-like instabilities occur at the interface of two fluids, whenever a less viscous phase displaces a more viscous phase. This instability is notoriously difficult to control, especially for given viscosity ratio and geometry. Here we demonstrate experimentally the active control of viscous fingering of two given liquids, for given geometry and flow rate in a Hele-Shaw cell. The control is realized by taking advantage of electro-osmotic flows along the surfaces confining the fluid, via applying an external electric field. Depending on the direction of electric field, the induced secondary electro-osmotic flows either assist or oppose the hydraulic flow, effectively reducing or increasing the flow resistance, leading to the control of interface stability. The mechanism of apparent "electrokinetic thinning/thickening" is proposed to explain the experimental observations. Theoretical predictions of linear stability are confirmed experimentally for a broad range of immiscible electrolyte displacements.