Artificial weathering of plastics used in oyster farming.

With the omnipresence of plastic litter from oyster farming in marine coastal areas, the objective of this work was to better understand the weathering of plastics used in this field, focusing on oyster spat collectors. During their use, around fifteen years, collectors made of polypropylene (PP) undergo numerous degradations, alternatively submerged, emerged in seawater, and stored outdoor until the next cycle. They weaken, crack, break, end up fragmenting and disseminated in the environment as microplastics associated to persistent organic pollutants. In this work, a comparison of 55 months of in situ weathering with five months of artificial weathering in air or in artificial seawater in a homemade UV chamber was conducted to better understand the mechanisms involved. Chemical, thermal and surface characterizations of virgin and weathered samples were conducted using Fourier Transform Infrared Spectroscopy (FTIR), Differential Scanning Calorimetry (DSC) and Environmental Scanning Electron Microscopy (ESEM). After 55 months of in situ weathering, collectors were notably damaged with large fissures and loss of microplastics (MPs) associated with an increase of carbonyl index values and a decrease of melting temperatures and crystallinity rates. Considering only UV irradiation, five months of artificial weathering at 30 °C under continuous irradiation of 6.9 W/m2 under UV lamps (295-400 nm) reproduced approximately 4.4 months of natural sunlight. Artificial weathering confirmed that photooxidation by combined effects of UV rays and oxygen was the main weathering mechanism and was reduced in seawater. These results help to understand the mechanisms involved in the weathering of these collectors in the marine environment and provide valuable information for industrials and professionals. Our study suggests a better storage away from UV rays and a reduction of the duration of use compared to current practices.

Family of Bioactive Heparin-Coated Iron Oxide Nanoparticles with Positive Contrast in Magnetic Resonance Imaging for Specific Biomedical Applications.

Unfractionated heparin (UFH) and low-molecular-weight heparins (LMWH) are well-known for their anticoagulant properties. There is also currently a growing interest in using LMWH in targeted cancer therapy. In particular, several types inhibit heparanase, a key enzyme overexpressed in the tumor microenvironment that promotes angiogenesis progression and metastasis spreading. Here, we propose iron oxide nanoparticles (HEP-IONP) coated with different heparins of distinct anticoagulant/anti-heparanase activity ratios and suitable for positive contrast in magnetic resonance imaging. As a proof of concept, magnetic resonance angiography (MRA) was conducted in mice up to 3 h after intravenous administration. This new IONP-based positive contrast appropriate for clinic together with the long vascular circulating times can enable innovative theranostic applications if combined with the various bioactivities of the heparins. Indeed, we showed, using advanced in vitro tests, how HEP-IONP anticoagulant or anti-heparanase activities were maintained depending on the heparin species used for the coating. Overall, the study allowed presenting an IONP coated with a commercial LMWH (Lovenox) suggested as a theranostic translational probe for MRA diagnostic and treatment of thrombosis, and an antitumor IONP coated with a specific depolymerized heparin to be used in targeted therapy and diagnostic modalities.

An optimized methodology to analyze biopolymer capsules by environmental scanning electron microscopy.

The aim of this paper is to describe an optimized methodology to study the surface characteristics and internal structure of biopolymer capsules using scanning electron microscopy (SEM) in environmental mode. The main advantage of this methodology is that no preparation is required and, significantly, no metallic coverage is deposited on the surface of the specimen, thus preserving the original capsule shape and its surface morphology. This avoids introducing preparation artefacts which could modify the capsule surface and mask information concerning important feature like porosities or roughness. Using this method gelatin and mainly fatty coatings, difficult to be analyzed by standard SEM technique, unambiguously show fine details of their surface morphology without damage. Furthermore, chemical contrast is preserved in backscattered electron images of unprepared samples, allowing visualizing the internal organization of the capsule, the quality of the envelope, etc... This study provides pointers on how to obtain optimal conditions for the analysis of biological or sensitive material, as this is not always studied using appropriate techniques. A reliable evaluation of the parameters used in capsule elaboration for research and industrial applications, as well as that of capsule functionality is provided by this methodology, which is essential for the technological progress in this domain.

A physical approach to modify the hydraulic reactivity of alpha-tricalcium phosphate powder.

A microsized alpha-tricalcium phosphate (alpha-TCP) powder was calcined at various temperatures (350 degrees C

Osteoblast response to biomimetically altered titanium surfaces.

Bioinert titanium (Ti) materials are generally encapsulated by fibrous tissue after implantation into the living body. To improve the bone-bonding ability of Ti implants, we activated commercially pure titanium (cpTi) by a simple chemical pre-treatment in HCl and NaOH. Subsequently, we exposed the treated samples to simulated body fluid (SBF) for 2 (TiCT) and 14 days (TiHCA), respectively, to mimic the early stages of bone bonding and to investigate the in vitro response of osteoblasts on thus altered biomimetic surfaces. Sample surfaces were characterized by scanning electron microscopy, energy-dispersive X-ray analysis, cross-sectional transmission electron microscopy analyses, Fourier transform infrared and Raman spectroscopy. It was shown that the efflorescence consisting of sodium titanate that is present on pre-treated cpTi surfaces transformed to calcium titanate after 2 days in SBF. After 14 days in SBF a homogeneous biomimetic apatite layer precipitated. Human osteoblasts (MG-63) revealed a well spread morphology on both functionalized Ti surfaces. On TiCT, the gene expression of the differentiation proteins alkaline phosphatase (ALP) and bone sialo protein was increased after 2 days. On both TiCT and TiHCA, the collagen I and ALP expression on the protein level was enhanced at 7 and 14 days. The TiCT and the TiHCA surfaces reveal the tendency to increase the differentiated cell function of MG-63 osteoblasts. Thus, chemical pre-treatment of titanium seems to be a promising method to generate osteoconductive surfaces.

Biomimetic apatite coatings--carbonate substitution and preferred growth orientation.

Biomimetic apatite coatings were obtained by soaking chemically treated titanium in SBF with different HCO(3)(-) concentration. XRD, FTIR and Raman analyses were used to characterize phase composition and degree of carbonate substitution. The microstructure, elemental composition and preferred alignment of biomimetically precipitated crystallites were characterized by cross-sectional TEM analyses. According to XRD, the phase composition of precipitated coatings on chemically pre-treated titanium after exposure to SBF was identified as hydroxy carbonated apatite (HCA). A preferred c-axis orientation of the deposited crystals can be supposed due to the high relative peak intensities of the (002) diffraction line at 2theta=26 degrees compared to the 100% intensity peak of the (211) plane at 2theta=32 degrees . The crystallite size in direction of the c-axis of HCA decreased from 26 nm in SBF5 with a HCO(3)(-) concentration of 5 mmol/l to 19 nm in SBF27 with a HCO(3)(-) concentration of 27 mmol/l. Cross-sectional TEM analyses revealed that all distances correspond exactly to the hexagonal structure of hydroxyapatite. The HCO(3)(-) content in SBF also influences the composition of precipitated calcium phosphates. Biomimetic apatites were shown to have a general formula of Ca(10-x-y)Mg(y)(HPO(4))(x-z)(CO(3))(z)(PO(4))(6-x)(OH)(2-x-w)(CO(3))(w/2). According to FTIR and Raman analyses, it can be supposed that as long as the HCO(3)(-) concentration in the testing solutions is below 20 mmol/l, only B-type HCA (0