RESUMO
Natural products are a diverse class of compounds with promising biological properties, such as high potency and excellent selectivity. However, they have different structural motifs than typical drug-like compounds, e.g., a wider range of molecular weight, multiple stereocenters and higher fraction of sp3-hybridized carbons. This makes the encoding of natural products via molecular fingerprints difficult, thus restricting their use in cheminformatics studies. To tackle this issue, we explored over 30 years of research to systematically evaluate which molecular fingerprint provides the best performance on the natural product chemical space. We considered 20 molecular fingerprints from four different sources, which we then benchmarked on over 100,000 unique natural products from the COCONUT (COlleCtion of Open Natural prodUcTs) and CMNPD (Comprehensive Marine Natural Products Database) databases. Our analysis focused on the correlation between different fingerprints and their classification performance on 12 bioactivity prediction datasets. Our results show that different encodings can provide fundamentally different views of the natural product chemical space, leading to substantial differences in pairwise similarity and performance. While Extended Connectivity Fingerprints are the de-facto option to encoding drug-like compounds, other fingerprints resulted to match or outperform them for bioactivity prediction of natural products. These results highlight the need to evaluate multiple fingerprinting algorithms for optimal performance and suggest new areas of research. Finally, we provide an open-source Python package for computing all molecular fingerprints considered in the study, as well as data and scripts necessary to reproduce the results, at https://github.com/dahvida/NP_Fingerprints .
RESUMO
The capacity to discriminate safe from dangerous compounds has played an important role in the evolution of species, including human beings. Highly evolved senses such as taste receptors allow humans to navigate and survive in the environment through information that arrives to the brain through electrical pulses. Specifically, taste receptors provide multiple bits of information about the substances that are introduced orally. These substances could be pleasant or not according to the taste responses that they trigger. Tastes have been classified into basic (sweet, bitter, umami, sour and salty) or non-basic (astringent, chilling, cooling, heating, pungent), while some compounds are considered as multitastes, taste modifiers or tasteless. Classification-based machine learning approaches are useful tools to develop predictive mathematical relationships in such a way as to predict the taste class of new molecules based on their chemical structure. This work reviews the history of multicriteria quantitative structure-taste relationship modelling, starting from the first ligand-based (LB) classifier proposed in 1980 by Lemont B. Kier and concluding with the most recent studies published in 2022.
Assuntos
Papilas Gustativas , Paladar , Humanos , Paladar/fisiologia , Percepção GustatóriaRESUMO
Mass spectrometry (MS) is widely used for the identification of chemical compounds by matching the experimentally acquired mass spectrum against a database of reference spectra. However, this approach suffers from a limited coverage of the existing databases causing a failure in the identification of a compound not present in the database. Among the computational approaches for mining metabolite structures based on MS data, one option is to predict molecular fingerprints from the mass spectra by means of chemometric strategies and then use them to screen compound libraries. This can be carried out by calibrating multi-task artificial neural networks from large datasets of mass spectra, used as inputs, and molecular fingerprints as outputs. In this study, we prepared a large LC-MS/MS dataset from an on-line open repository. These data were used to train and evaluate deep-learning-based approaches to predict molecular fingerprints and retrieve the structure of unknown compounds from their LC-MS/MS spectra. Effects of data sparseness and the impact of different strategies of data curing and dimensionality reduction on the output accuracy have been evaluated. Moreover, extensive diagnostics have been carried out to evaluate modelling advantages and drawbacks as a function of the explored chemical space.
Assuntos
Redes Neurais de Computação , Espectrometria de Massas em Tandem , Cromatografia Líquida/métodos , Bases de Dados Factuais , Espectrometria de Massas em Tandem/métodosRESUMO
According to the 2021 World Drug Report, around 275 million people use drugs of abuse, and 36 million people suffer from addiction, fostering a thriving market for illicit substances. In Italy, 30,083 people were reported to the Judicial Authority for offenses in violation of the Italian Law D.P.R. 309/1990. These offences are sentenced after a qualitative-quantitative analysis of seized materials. Given the large quantity of seized drugs and the need to perform accurate analytical determinations, Italian forensic laboratories struggle to complete analyses in a short time, delaying the entire reporting process needed to achieve sentencing. For this purpose, an UHPLC-MS/MS-based platform was developed at the University of Milano-Bicocca to support law-enforcement authorities. Software was designed to easily manage street seizure acquisition, documentation registration, and sampling. A sensitive UHPLC-MS/MS method was fully validated for the quantification of the traditional illicit substances (cocaine, heroin, 6-MAM, morphine, amphetamine, methamphetamine, MDMA, ketamine, GHB, GBL, LSD, trans-∆9-THC, and THCA) at the ppb level. The final report is relayed to the Prefecture in 3-4 days, even within 24 h for urgent requests. The platform allows for semi-automatic data handling to minimize erroneous results for an accurate report generation by standardized procedures.
Assuntos
Drogas Ilícitas , Metanfetamina , Humanos , Espectrometria de Massas em Tandem/métodos , Cromatografia Líquida de Alta Pressão , Drogas Ilícitas/análise , Anfetamina , Detecção do Abuso de Substâncias/métodosRESUMO
Neural networks are rapidly gaining popularity in chemical modeling and Quantitative Structure-Activity Relationship (QSAR) thanks to their ability to handle multitask problems. However, outcomes of neural networks depend on the tuning of several hyperparameters, whose small variations can often strongly affect their performance. Hence, optimization is a fundamental step in training neural networks although, in many cases, it can be very expensive from a computational point of view. In this study, we compared four of the most widely used approaches for tuning hyperparameters, namely, grid search, random search, tree-structured Parzen estimator, and genetic algorithms on three multitask QSAR datasets. We mainly focused on parsimonious optimization and thus not only on the performance of neural networks, but also the computational time that was taken into account. Furthermore, since the optimization approaches do not directly provide information about the influence of hyperparameters, we applied experimental design strategies to determine their effects on the neural network performance. We found that genetic algorithms, tree-structured Parzen estimator, and random search require on average 0.08% of the hours required by grid search; in addition, tree-structured Parzen estimator and genetic algorithms provide better results than random search.
RESUMO
BACKGROUND: Humans are exposed to tens of thousands of chemical substances that need to be assessed for their potential toxicity. Acute systemic toxicity testing serves as the basis for regulatory hazard classification, labeling, and risk management. However, it is cost- and time-prohibitive to evaluate all new and existing chemicals using traditional rodent acute toxicity tests. In silico models built using existing data facilitate rapid acute toxicity predictions without using animals. OBJECTIVES: The U.S. Interagency Coordinating Committee on the Validation of Alternative Methods (ICCVAM) Acute Toxicity Workgroup organized an international collaboration to develop in silico models for predicting acute oral toxicity based on five different end points: Lethal Dose 50 (LD50 value, U.S. Environmental Protection Agency hazard (four) categories, Globally Harmonized System for Classification and Labeling hazard (five) categories, very toxic chemicals [LD50 (LD50≤50mg/kg)], and nontoxic chemicals (LD50>2,000mg/kg). METHODS: An acute oral toxicity data inventory for 11,992 chemicals was compiled, split into training and evaluation sets, and made available to 35 participating international research groups that submitted a total of 139 predictive models. Predictions that fell within the applicability domains of the submitted models were evaluated using external validation sets. These were then combined into consensus models to leverage strengths of individual approaches. RESULTS: The resulting consensus predictions, which leverage the collective strengths of each individual model, form the Collaborative Acute Toxicity Modeling Suite (CATMoS). CATMoS demonstrated high performance in terms of accuracy and robustness when compared with in vivo results. DISCUSSION: CATMoS is being evaluated by regulatory agencies for its utility and applicability as a potential replacement for in vivo rat acute oral toxicity studies. CATMoS predictions for more than 800,000 chemicals have been made available via the National Toxicology Program's Integrated Chemical Environment tools and data sets (ice.ntp.niehs.nih.gov). The models are also implemented in a free, standalone, open-source tool, OPERA, which allows predictions of new and untested chemicals to be made. https://doi.org/10.1289/EHP8495.
Assuntos
Órgãos Governamentais , Animais , Simulação por Computador , Ratos , Testes de Toxicidade Aguda , Estados Unidos , United States Environmental Protection AgencyRESUMO
Chianti is a precious red wine and enjoys a high reputation for its high quality in the world wine market. Despite this, the production region is small and product needs efficient tools to protect its brands and prevent adulterations. In this sense, ICP-MS combined with chemometrics has demonstrated its usefulness in food authentication. In this study, Chianti/Chianti Classico, authentic wines from vineyard of Toscana region (Italy), together samples from 18 different geographical regions, were analyzed with the objective of differentiate them from other Italian wines. Partial Least Squares-Discriminant Analysis (PLS-DA) identified variables to discriminate wine geographical origin. Rare Earth Elements (REE), major and trace elements all contributed to the discrimination of Chianti samples. General model was not suited to distinguish PDO red wines from samples, with similar chemical fingerprints, collected in some regions. Specific classification models enhanced the capability of discrimination, emphasizing the discriminant role of some elements.
Assuntos
Análise de Alimentos/métodos , Espectrometria de Massas/métodos , Vinho/análise , Análise Discriminante , Análise de Alimentos/estatística & dados numéricos , Itália , Análise dos Mínimos Quadrados , Limite de Detecção , Espectrometria de Massas/estatística & dados numéricos , Metais Terras Raras/análise , Oligoelementos/análiseRESUMO
Consensus strategies have been widely applied in many different scientific fields, based on the assumption that the fusion of several sources of information increases the outcome reliability. Despite the widespread application of consensus approaches, their advantages in quantitative structure-activity relationship (QSAR) modeling have not been thoroughly evaluated, mainly due to the lack of appropriate large-scale data sets. In this study, we evaluated the advantages and drawbacks of consensus approaches compared to single classification QSAR models. To this end, we used a data set of three properties (androgen receptor binding, agonism, and antagonism) for approximately 4000 molecules with predictions performed by more than 20 QSAR models, made available in a large-scale collaborative project. The individual QSAR models were compared with two consensus approaches, majority voting and the Bayes consensus with discrete probability distributions, in both protective and nonprotective forms. Consensus strategies proved to be more accurate and to better cover the analyzed chemical space than individual QSARs on average, thus motivating their widespread application for property prediction. Scripts and data to reproduce the results of this study are available for download.
Assuntos
Relação Quantitativa Estrutura-Atividade , Teorema de Bayes , Consenso , Reprodutibilidade dos TestesRESUMO
BACKGROUND: Endocrine disrupting chemicals (EDCs) are xenobiotics that mimic the interaction of natural hormones and alter synthesis, transport, or metabolic pathways. The prospect of EDCs causing adverse health effects in humans and wildlife has led to the development of scientific and regulatory approaches for evaluating bioactivity. This need is being addressed using high-throughput screening (HTS) in vitro approaches and computational modeling. OBJECTIVES: In support of the Endocrine Disruptor Screening Program, the U.S. Environmental Protection Agency (EPA) led two worldwide consortiums to virtually screen chemicals for their potential estrogenic and androgenic activities. Here, we describe the Collaborative Modeling Project for Androgen Receptor Activity (CoMPARA) efforts, which follows the steps of the Collaborative Estrogen Receptor Activity Prediction Project (CERAPP). METHODS: The CoMPARA list of screened chemicals built on CERAPP's list of 32,464 chemicals to include additional chemicals of interest, as well as simulated ToxCast™ metabolites, totaling 55,450 chemical structures. Computational toxicology scientists from 25 international groups contributed 91 predictive models for binding, agonist, and antagonist activity predictions. Models were underpinned by a common training set of 1,746 chemicals compiled from a combined data set of 11 ToxCast™/Tox21 HTS in vitro assays. RESULTS: The resulting models were evaluated using curated literature data extracted from different sources. To overcome the limitations of single-model approaches, CoMPARA predictions were combined into consensus models that provided averaged predictive accuracy of approximately 80% for the evaluation set. DISCUSSION: The strengths and limitations of the consensus predictions were discussed with example chemicals; then, the models were implemented into the free and open-source OPERA application to enable screening of new chemicals with a defined applicability domain and accuracy assessment. This implementation was used to screen the entire EPA DSSTox database of â¼875,000 chemicals, and their predicted AR activities have been made available on the EPA CompTox Chemicals dashboard and National Toxicology Program's Integrated Chemical Environment. https://doi.org/10.1289/EHP5580.
Assuntos
Simulação por Computador , Disruptores Endócrinos , Androgênios , Bases de Dados Factuais , Ensaios de Triagem em Larga Escala , Humanos , Receptores Androgênicos , Estados Unidos , United States Environmental Protection AgencyRESUMO
The nuclear androgen receptor (AR) is one of the most relevant biological targets of Endocrine Disrupting Chemicals (EDCs), which produce adverse effects by interfering with hormonal regulation and endocrine system functioning. This paper describes novel in silico models to identify organic AR modulators in the context of the Collaborative Modeling Project of Androgen Receptor Activity (CoMPARA), coordinated by the National Center of Computational Toxicology (U.S. Environmental Protection Agency). The collaborative project involved 35 international research groups to prioritize the experimental tests of approximatively 40k compounds, based on the predictions provided by each participant. In this paper, we describe our machine learning approach to predict the binding to AR, which is based on a consensus of a multivariate Bernoulli Naive Bayes, a Random Forest, and N-Nearest Neighbor classification models. The approach was developed in compliance with the Organization of Economic Cooperation and Development (OECD) principles, trained on 1687 ToxCast molecules classified according to 11 in vitro assays, and further validated on a set of 3,882 external compounds. The models provided robust and reliable predictions and were used to gather novel data-driven insights on the structural features related to AR binding, agonism, and antagonism.
Assuntos
Antagonistas de Receptores de Andrógenos/farmacologia , Androgênios/farmacologia , Disruptores Endócrinos/farmacologia , Aprendizado de Máquina , Receptores Androgênicos/metabolismo , Antagonistas de Receptores de Andrógenos/química , Androgênios/química , Descoberta de Drogas , Disruptores Endócrinos/química , Humanos , Simulação de Acoplamento Molecular , Ligação Proteica , SoftwareRESUMO
The ICCVAM Acute Toxicity Workgroup (U.S. Department of Health and Human Services), in collaboration with the U.S. Environmental Protection Agency (U.S. EPA, National Center for Computational Toxicology), coordinated the "Predictive Models for Acute Oral Systemic Toxicity" collaborative project to develop in silico models to predict acute oral systemic toxicity for filling regulatory needs. In this framework, new Quantitative Structure-Activity Relationship (QSAR) models for the prediction of very toxic (LD50 lower than 50â mg/kg) and nontoxic (LD50 greater than or equal to 2,000â mg/kg) endpoints were developed, as described in this study. Models were developed on a large set of chemicals (8992), provided by the project coordinators, considering the five OCED principles for QSAR applicability to regulatory endpoints. A Bayesian consensus approach integrating three different classification QSAR algorithms was applied as modelling method. For both the considered endpoints, the proposed approach demonstrated to be robust and predictive, as determined by a blind validation on a set of external molecules provided in a later stage by the coordinators of the collaborative project. Finally, the integration of predictions obtained for the very toxic and nontoxic endpoints allowed the identification of compounds associated to medium toxicity, as well as the analysis of consistency between the predictions obtained for the two endpoints on the same molecules. Predictions of the proposed consensus approach will be integrated with those originated from models proposed by the participants of the collaborative project to facilitate the regulatory acceptance of in-silico predictions and thus reduce or replace experimental tests for acute toxicity.
Assuntos
Compostos Orgânicos/toxicidade , Relação Quantitativa Estrutura-Atividade , Administração Oral , Animais , Teorema de Bayes , Simulação por Computador , Relação Dose-Resposta a Droga , Modelos Moleculares , Compostos Orgânicos/administração & dosagem , Ratos , Software , Estados Unidos , United States Dept. of Health and Human Services , United States Environmental Protection AgencyRESUMO
This work presents the first-time QSAR approach to predict the laboratory-based fish biomagnification factor (BMF) of organic chemicals, to be used as a supporting tool for assessing bioaccumulation at the regulatory level. The developed strategy is based on 2 levels of prediction, with a varying trade-off between interpretability and performance according to the user's needs. We designed our models to be intrinsically acceptable at the regulatory level (in what we defined as "acceptable-by-design" strategy), by (i) complying with OECD principles directly in the approach development phase, (ii) choosing easy-to-apply modeling techniques, (iii) preferring simple descriptors when possible, and (iv) striving to provide data-driven mechanistic insights. Our novel tool has an error comparable to the observed experimental inter- and intraspecies variability and is stable on borderline compounds (root mean square error [RMSE] ranging from RMSE = 0.45 to RMSE = 0.45 log units on test data). Additionally, the models' molecular descriptors are carefully described and interpreted, allowing us to gather additional mechanistic insights into the structural features controlling the dietary bioaccumulation of chemicals in fish. To improve the transparency and promote the application of the model, the data set and the stand alone prediction tool are provided free of charge at https://github.com/grisoniFr/bmf_qsar Integr Environ Assess Manag 2019;15:51-63. © 2018 SETAC.
Assuntos
Exposição Dietética/estatística & dados numéricos , Poluentes Químicos da Água/análise , Poluição Química da Água/estatística & dados numéricos , Animais , Dieta/estatística & dados numéricos , Monitoramento Ambiental/métodos , Peixes , Relação Quantitativa Estrutura-AtividadeRESUMO
Quantitative Structure - Activity Relationship (QSAR) models play a central role in medicinal chemistry, toxicology and computer-assisted molecular design, as well as a support for regulatory decisions and animal testing reduction. Thus, assessing their predictive ability becomes an essential step for any prospective application. Many metrics have been proposed to estimate the model predictive ability of QSARs, which have created confusion on how models should be evaluated and properly compared. Recently, we showed that the metric Q F 3 2 is particularly well-suited for comparing the external predictivity of different models developed on the same training dataset. However, when comparing models developed on different training data, this function becomes inadequate and only dispersion measures like the root-mean-square error (RMSE) should be used. The intent of this work is to provide clarity on the correct and incorrect uses of Q F 3 2 , discussing its behavior towards the training data distribution and illustrating some cases in which Q F 3 2 estimates may be misleading. Hereby, we encourage the usage of measures of dispersions when models trained on different datasets have to be compared and evaluated.
Assuntos
Relação Quantitativa Estrutura-Atividade , Algoritmos , Desenho de Fármacos , Descoberta de Drogas/métodos , Descoberta de Drogas/normasRESUMO
Legislators have included bioaccumulation in the evaluation of chemicals in the framework of the European Registration, Evaluation, Authorization, and Restriction of Chemicals (REACH) regulation. REACH requires information on the bioconcentration factor (BCF), which is a parameter for assessing bioaccumulation and encourages the use of a weight-of-evidence approach, including predictions from quantitative structure-activity relationships (QSARs). This study presents a novel approach, based on structural alerts, to be used as a decision-support system for the identification of substances with bioaccumulation potential. In a regulatory framework, these alerts can be integrated with other sources of information, such as experimental and in silico data, to reduce the uncertainty of the assessment, thereby supporting a weight-of-evidence approach. Moreover, the identified alerts have a direct connection with relevant structural features, thus fostering the applicability and interpretability of the approach. The structural alerts were identified on 779 chemicals annotated for their fish BCF, and the approach was then validated on 278 external molecules. The developed decision-support system allowed identification of 77% of bioaccumulative chemicals and was competitive with more complex QSAR models used in regulatory assessments. The approach is implemented in an easy-to-use workflow, provided free of charge. Integr Environ Assess Manag 2019;15:19-28. © 2018 SETAC.
Assuntos
Monitoramento Ambiental , Poluentes Ambientais/química , Relação Quantitativa Estrutura-AtividadeRESUMO
Molecular descriptors encode a wide variety of molecular information and have become the support of many contemporary chemoinformatic and bioinformatic applications. They grasp specific molecular features (e.g., geometry, shape, pharmacophores, or atomic properties) and directly affect computational models, in terms of outcome, performance, and applicability. This chapter aims to illustrate the impact of different molecular descriptors on the structural information captured and on the perceived chemical similarity among molecules. After introducing the fundamental concepts of molecular descriptor theory and application, a step-by-step retrospective virtual screening procedure guides users through the fundamental processing steps and discusses the impact of different types of molecular descriptors.
Assuntos
Técnicas de Química Combinatória/métodos , Biologia Computacional/métodos , Simulação por Computador , Desenho de Fármacos , Modelos Moleculares , Algoritmos , HumanosRESUMO
Molecular descriptors capture diverse parts of the structural information of molecules and they are the support of many contemporary computer-assisted toxicological and chemical applications. After briefly introducing some fundamental concepts of structure-activity applications (e.g., molecular descriptor dimensionality, classical vs. fingerprint description, and activity landscapes), this chapter guides the readers through a step-by-step explanation of molecular descriptors rationale and application. To this end, the chapter illustrates a case study of a recently published application of molecular descriptors for modeling the activity on cytochrome P450.
Assuntos
Modelos Moleculares , Relação Quantitativa Estrutura-Atividade , Algoritmos , Sistema Enzimático do Citocromo P-450/química , Conformação Molecular , Estrutura Molecular , SoftwareRESUMO
This work investigates the bioaccumulation patterns of 168 organic chemicals in fish, by comparing their bioconcentration factor (BCF), biomagnification factor (BMF) and octanol-water partitioning coefficient (KOW). It aims to gain insights on the relationships between dietary and non-dietary bioaccumulation in aquatic environment, on the effectiveness of KOW and BCF to detect compounds that bioaccumulate through diet, as well as to detect the presence of structure-related bioaccumulation patterns. A linear relationship between logBMF and logKOW was observed (logBMFâ¯=â¯1.14·logBCF - 6.20) up to logKOWâ¯≈â¯4, as well as between logBMF and logBCF (logBMFâ¯=â¯0.96·logBCF - 4.06) up to a logBCFâ¯≈â¯5. 10% of compounds do not satisfy the linear BCF-BMF relationship. The deviations from such linear relationships were further investigated with the aid of a self-organizing map and canonical correlation analysis, which allowed us to shed light on some structure-related patterns. Finally, the usage of KOW- and BCF-based thresholds to detect compounds that accumulate through diet led to many false positives (47%-91% for KOW), and a moderate number of false negatives (up to 5% for BCF). These results corroborate the need of using the experimental BMF for hazard assessment practices, as well as of developing computational tools for BMF prediction.
Assuntos
Monitoramento Ambiental/métodos , Peixes/metabolismo , Modelos Estatísticos , Compostos Orgânicos/farmacocinética , Poluentes Químicos da Água/farmacocinética , AnimaisRESUMO
This work describes a novel approach based on advanced molecular similarity to predict the sweetness of chemicals. The proposed Quantitative Structure-Taste Relationship (QSTR) model is an expert system developed keeping in mind the five principles defined by the Organization for Economic Co-operation and Development (OECD) for the validation of (Q)SARs. The 649 sweet and non-sweet molecules were described by both conformation-independent extended-connectivity fingerprints (ECFPs) and molecular descriptors. In particular, the molecular similarity in the ECFPs space showed a clear association with molecular taste and it was exploited for model development. Molecules laying in the subspaces where the taste assignation was more difficult were modeled trough a consensus between linear and local approaches (Partial Least Squares-Discriminant Analysis and N-nearest-neighbor classifier). The expert system, which was thoroughly validated through a Monte Carlo procedure and an external set, gave satisfactory results in comparison with the state-of-the-art models. Moreover, the QSTR model can be leveraged into a greater understanding of the relationship between molecular structure and sweetness, and into the design of novel sweeteners.