Analysis of cellular adhesion on superhydrophobic and superhydrophilic vertically aligned carbon nanotube scaffolds.

We analyzed GFP cells after 24h cultivated on superhydrophilic vertically aligned carbon nanotube scaffolds. We produced two different densities of VACNT scaffolds on Ti using Ni or Fe catalysts. A simple and fast oxygen plasma treatment promoted the superhydrophilicity of them. We used five different substrates, such as: as-grown VACNT produced using Ni as catalyst (Ni), as-grown VACNT produced using Fe as catalyst (Fe), VACNT-O produced using Ni as catalyst (NiO), VACNT-O produced using Fe as catalyst (FeO) and Ti (control). The 4',6-diamidino-2-phenylindole reagent nuclei stained the adherent cells cultivated on five different analyzed scaffolds. We used fluorescence microscopy for image collect, ImageJ® to count adhered cell and GraphPad Prism 5® for statistical analysis. We demonstrated in crescent order: Fe, Ni, NiO, FeO and Ti scaffolds that had an improved cellular adhesion. Oxygen treatment associated to high VACNT density (group FeO) presented significantly superior cell adhesion up to 24h. However, they do not show significant differences compared with Ti substrates (control). We demonstrated that all the analyzed substrates were nontoxic. Also, we proposed that the density and hydrophilicity influenced the cell adhesion behavior.

Graphene and carbon nanotube composite enabling a new prospective treatment for trichomoniasis disease.

We report the synthesis and application of novel graphene oxide and carbon nanotube oxide (GCN-O) composite. First, pristine multi-walled carbon nanotube was prepared by chemical vapour deposition furnace and then exfoliated and oxidised simultaneously by oxygen plasma etching. The superficial and volumetric compositions of GCN-O were measured by XPS spectroscopy and EDX spectroscopy, respectively. Both XPS and EDX analyses evidence that the GCN-O is composed of up to 20% of oxygen atoms. As a result, GCN-O forms a stable colloidal aqueous solution and shows to have strong interaction with the cell membrane of Tritrichomonas foetus protozoa, making easy its application as a drug carrier. Trichomoniasis infection of cattle is a devastating disease for cattle producers, causing some damages to females and fetus, and the abortion is the most serious result of this disease. There is no effective treatment for trichomoniasis infection yet. Therefore, new treatment, especially one with no collateral effects in animals, is required. With this goal in mind, our results suggest that water dispersible composite is a novel nanomaterial, promising for Trichomoniasis infection treatment and as therapeutic delivery agent as well.

Graphene and carbon nanotube nanocomposite for gene transfection.

Graphene and carbon nanotube nanocomposite (GCN) was synthesised and applied in gene transfection of pIRES plasmid conjugated with green fluorescent protein (GFP) in NIH-3T3 and NG97 cell lines. The tips of the multi-walled carbon nanotubes (MWCNTs) were exfoliated by oxygen plasma etching, which is also known to attach oxygen content groups on the MWCNT surfaces, changing their hydrophobicity. The nanocomposite was characterised by high resolution scanning electron microscopy; energy-dispersive X-ray, Fourier transform infrared and Raman spectroscopies, as well as zeta potential and particle size analyses using dynamic light scattering. BET adsorption isotherms showed the GCN to have an effective surface area of 38.5m(2)/g. The GCN and pIRES plasmid conjugated with the GFP gene, forming π-stacking when dispersed in water by magnetic stirring, resulting in a helical wrap. The measured zeta potential confirmed that the plasmid was connected to the nanocomposite. The NIH-3T3 and NG97 cell lines could phagocytize this wrap. The gene transfection was characterised by fluorescent protein produced in the cells and pictured by fluorescent microscopy. Before application, we studied GCN cell viability in NIH-3T3 and NG97 line cells using both MTT and Neutral Red uptake assays. Our results suggest that GCN has moderate stability behaviour as colloid solution and has great potential as a gene carrier agent in non-viral based therapy, with low cytotoxicity and good transfection efficiency.

Porous boron-doped diamond/carbon nanotube electrodes.

Nanostructuring boron-doped diamond (BDD) films increases their sensitivity and performance when used as electrodes in electrochemical environments. We have developed a method to produce such nanostructured, porous electrodes by depositing BDD thin film onto a densely packed "forest" of vertically aligned multiwalled carbon nanotubes (CNTs). The CNTs had previously been exposed to a suspension of nanodiamond in methanol causing them to clump together into "teepee" or "honeycomb" structures. These nanostructured CNT/BDD composite electrodes have been extensively characterized by scanning electron microscopy, Raman spectroscopy, cyclic voltammetry, and electrochemical impedance spectroscopy. Not only do these electrodes possess the excellent, well-known characteristics associated with BDD (large potential window, chemical inertness, low background levels), but also they have electroactive areas and double-layer capacitance values ∼450 times greater than those for the equivalent flat BDD electrodes.

Field emission from hybrid diamond-like carbon and carbon nanotube composite structures.

A thin diamond-like carbon (DLC) film was deposited onto a densely packed "forest" of vertically aligned multiwalled carbon nanotubes (VACNT). DLC deposition caused the tips of the CNTs to clump together to form a microstructured surface. Field-emission tests of this new composite material show the typical low threshold voltages for carbon nanotube structures (2 V µm(-1)) but with greatly increased emission current, better stability, and longer lifetime.

Epoxy composite with milimetric carbon nanotubes.

Composite of multi-walled carbon nanotubes (MWCNT) and epoxy resin DGEBA were obtained with DDM hardener. The MWCNT were synthesized with length of millimeters by camphor/ferrocene pyrolysis. Different cure temperatures of DGEBA/DDM with addition of up to 1% MWCNT were studied to evaluate eventual changes in cure kinetics by differential scanning calorimetry (DSC). No change was detected in glass transition temperature with insertion of MWCNT although the cure enthalpy has been reduced.

Thermal annealing and electrochemical purification of multi-walled carbon nanotubes produced by camphor/ferrocene mixtures.

Multi-walled carbon nanotubes (MWCNT) were obtained by pyrolysis of camphor/ferrocene mixtures, at different concentrations of ferrocene, on quartz, polished silicon and carbon felt substrates. A detailed study by electron microscopy, Raman spectroscopy, X-ray diffraction and thermogravimetric analysis was carried out to determine the purity degree of MWCNTs. Thermal annealing under vacuum and electrochemical purification were used for iron removal. The thermal annealing brings improvement on crystalline structure of MWCNTs, besides iron elimination from internal structure of the tubes, while the electrochemical treatments remove efficiently the iron from MWCNT surface.

Improvement of diamond-like carbon electrochemical corrosion resistance by addition of nanocrystalline diamond.

Nanocrystalline diamond (NCD) particles were incorporated into diamond-like carbon (DLC) films in order to investigate NCD-DLC electrochemical corrosion resistance. The films were grown over 304 stainless steel using plasma-enhanced chemical vapor deposition. NCD particles were incorporated into DLC during the deposition process. The investigation of NCD-DLC electrochemical corrosion behavior was performed using potentiodynamic polarization against NaCl. NCD-DLC films presented more negative corrosion potential and lower anodic and cathodic current densities. The electrochemical analysis indicated that NCD-DLC films present superior impedance and polarization resistance compared to the pure DLC, which indicate that they are promising corrosion protective coatings in aggressive solutions.

Antibacterial activity of DLC films containing TiO2 nanoparticles.

Diamond-like carbon (DLC) films have been the focus of extensive research in recent years due to their potential applications as surface coatings on biomedical devices. Titanium dioxide (TiO2) in the anatase crystalline form is a strong bactericidal agent when exposed to near-UV light. In this work we investigate the bactericidal activity of DLC films containing TiO2 nanoparticles. The films were grown on 316L stainless-steel substrates from a dispersion of TiO2 in hexane using plasma-enhanced chemical vapor deposition. The composition, bonding structure, surface energy, stress, and surface roughness of these films were also evaluated. The antibacterial tests were performed against Escherichia coli (E. coli) and the results were compared to the bacterial adhesion force to the studied surfaces. The presence of TiO2 in DLC bulk was confirmed by Raman spectroscopy. As TiO2 content increased, I(D)/I(G) ratio, hydrogen content, and roughness also increased; the films became more hydrophilic, with higher surface free energy and the interfacial energy of bacteria adhesion decreased. Experimental results show that TiO2 increased DLC bactericidal activity. Pure DLC films were thermodynamically unfavorable to bacterial adhesion. However, the chemical interaction between the E. coli and the studied films increased for the films with higher TiO2 concentration. As TiO2 bactericidal activity starts its action by oxidative damage to the bacteria wall, a decrease in the interfacial energy of bacteria adhesion causes an increase in the chemical interaction between E. coli and the films, which is an additional factor for the increasing bactericidal activity. From these results, DLC with TiO2 nanoparticles can be useful for producing coatings with antibacterial properties.

The activation energy for nanocrystalline diamond films deposited from an Ar/H2/CH4 hot-filament reactor.

In this work we have investigated the effect of substrate temperature on the growth rate and properties of nanocrystalline diamond thin films deposited by hot filament chemical vapor deposition (HFCVD). Mixtures of 0.5 vol% CH4 and 25 vol% H2 balanced with Ar at a pressure of 50 Torr and typical deposition time of 12 h. We present the measurement of the activation energy by accurately controlling the substrate temperature independently of other CVD parameters. Growth rates have been measured in the temperature range from 550 to 800 degrees C. Characterization techniques have involved Raman spectroscopy, high resolution X-ray difractometry and scanning electron microscopy. We also present a comparison with most activation energy for micro and nanocrystalline diamond determinations in the literature and propose that there is a common trend in most observations. The result obtained can be an evidence that the growth mechanism of NCD in HFCVD reactors is very similar to MCD growth.

Comparative cutting effectiveness of an ultrasonic diamond tip and a high-speed diamond bur.

AIM: The aim of this in vitro study was to compare an ultrasonic diamond tip to a high-speed conventional diamond bur regarding the cutting effectiveness in enamel and dentin of human teeth. METHODS: Twenty permanent molars were longitudinally sectioned in the buccal-lingual plane giving 40 specimens, 20 for enamel and 20 for dentin groups. One cavity was performed in each specimen using a spherical diamond tip (83231, CVDentus(R), CVDVale, São José dos Campos, SP, Brazil) coupled with an ultrasound device or a conventional spherical diamond bur (1013, KG Sorensen, São Paulo, Brazil)) coupled with a high-speed turbine. A modified measurement analysis using the Radiocef 4.0 software (Radiocef Memory) was applied to determine the width and the depth of the cavities on scanning electron microscopy (SEM) at x50 magnification micrographs. The features of the cavities and the characteristics of the cutting instruments were also examined under different magnifications by SEM. RESULTS: Statistical analysis by Kruskal-Wallis non-parametric and Dunn post hoc tests (P < or = 0.05) showed that cavities prepared in enamel and dentin with the ultrasonic diamond tip were shallower and narrower than those prepared with conventional diamond bur. The internal walls of cavities prepared in dentin by the ultrasonic diamond tip reproduced the superficial aspect of the diamond, however, scratches were observed in the internal walls of the dentin cut by high-speed conventional diamond bur. CONCLUSIONS: Both instruments were effective in enamel and dentin cutting; however, cavities prepared with a high-speed conventional diamond bur showed more invasive characteristics.

Gain measurements in stimulated rotational Raman scattering in para hydrogen.

The dependence on CO(2)-laser pump energy of the output Stokes radiation obtained through stimulated rotational Raman scattering in para hydrogen is studied experimentally. The effective plane-wave gain for this process was determined as a function of the scattered wavelength by using a theoretical expression for the scattered pulse energy. Experimental values for the gain follow an inverse-wavelength law and are in close agreement with theory.