Anticancer, antimicrobial and photocatalytic activities of a new pyrazole containing thiosemicarbazone ligand and its Co(III) and Ni(II) complexes: Synthesis, spectroscopic characterization and X-ray crystallography.

A new pyrazole based thiosemicarbazone ligand, 5-methyl-3-formylpyrazole-N(4)-isopropylthiosemicarbazone, (HMPzNHPri) (compound I), and its cobalt(III) and nickel(II) complexes, [Co(MPzNHPri)2]Cl (compound II) and [Ni(HMPzNHPri)2]Br2 (compound III), respectively, have been synthesized and characterized through various physico-chemical and spectroscopic studies. Both the reported Co(III) and Ni(II) complexes are cationic in nature and behave as 1:1 and 1:2 electrolytes in MeOH, respectively. Electronic spectral features of the complexes have classified them as distorted octahedral ones. IR spectral data (4000-450 cm-1) have suggested a monoprotic tridentate (NNS) function of compound I coordinating to the Co(III) ion via the pyrazolyl (tertiary) ring nitrogen, azomethine nitrogen and thiolato sulphur atom; while for compound III, compound I has been found to act as neutral NNS tridentate one, coordinating to Ni(II) via the pyrazolyl iminic nitrogen, azomethine nitrogen and thioketo sulphur. Structural features of all the compounds are confirmed by the single crystal X-ray data. All the compounds reported here have been found to exhibit significant photocatalytic activity towards degradation of Methylene Blue (MB) under UV radiation. Anticancer activity of all the three compounds against cancer cell lines (HeLa and A549) and a normal cell line (HEK293) have been investigated. Compound II has been found to be more efficient against the human cervical cancer cell (HeLa) and the lung cancer cell (A549) than compounds I and III. The ligand and both the complexes display potential activities against both gram-positive (Bacillus subtilis MTCC 7193) and gram-negative bacteria (E. coli MTCC 1610).

Poly[3-methyl-pyridinium [(µ2-di-hydrogen phosphito)bis(µ3-hydrogen phosphito)dizinc]].

In the title compound, {(C6H8N)[Zn2(HPO3)2(H2PO3)]}n, the constituent ZnO4, HPO3 and H2PO3 polyhedra of the inorganic component are linked into (010) sheets by Zn-O-P bonds (mean angle = 134.4°) and the layers are reinforced by O-H⋯O hydrogen bonds. The protonated templates are anchored to the inorganic sheets via bifurcated N-H⋯(O,O) hydrogen bonds.

Synthesis and Structural Studies of peri-Substituted Acenaphthenes with Tertiary Phosphine and Stibine Groups.

Two mixed peri-substituted phosphine-chlorostibines, Acenap(PiPr2)(SbPhCl) and Acenap(PiPr2)(SbCl2) (Acenap = acenaphthene-5,6-diyl) reacted cleanly with Grignard reagents or nBuLi to give the corresponding tertiary phosphine-stibines Acenap(PiPr2)(SbRR') (R, R' = Me, iPr, nBu, Ph). In addition, the Pt(II) complex of the tertiary phosphine-stibine Acenap(PiPr2)(SbPh2) as well as the Mo(0) complex of Acenap(PiPr2)(SbMePh) were synthesised and characterised. Two of the phosphine-stibines and the two metal complexes were characterised by single-crystal X-ray diffraction. The peri-substituted species act as bidentate ligands through both P and Sb atoms, forming rather short Sb-metal bonds. The tertiary phosphine-stibines display through-space J(CP) couplings between the phosphorus atom and carbon atoms bonded directly to the Sb atom of up to 40 Hz. The sequestration of the P and Sb lone pairs results in much smaller corresponding J(CP) being observed in the metal complexes. QTAIM (Quantum Theory of Atoms in Molecules) and EDA-NOCV (Energy Decomposition Analysis employing Naturalised Orbitals for Chemical Valence) computational techniques were used to provide additional insight into a weak n(P)→σ*(Sb-C) intramolecular bonding interaction (pnictogen bond) in the phosphine-stibines.

4-Fluoro-benzyl (Z)-2-(2-oxoindolin-3-yl-idene)hydrazine-1-carbodi-thio-ate.

The title compound, C16H12FN3OS, a fluorinated di-thio-carbazate imine derivative, was synthesized by the one-pot, multi-component condensation reaction of hydrazine hydrate, carbon di-sulfide, 4-fluoro-benzyl chloride and isatin. The compound demonstrates near-planarity across much of the mol-ecule in the solid state and a Z configuration for the azomethine C=N bond. The Z form is further stabilized by the presence of an intra-molecular N-H⋯O hydrogen bond. In the extended structure, mol-ecules are linked into dimers by N-H⋯O hydrogen bonds and further connected into chains along either [20] or [100] by weak C-H⋯S and C-H⋯F hydrogen bonds, which further link into corrugated sheets and in combination form the overall three-dimensional network.

Modular Synthesis of Complex Benzoxaboraheterocycles through Chelation-Assisted Rh-Catalyzed [2 + 2 + 2] Cycloaddition.

Benzoxaboraheterocycles (BOBs) are moieties of increasing interest in the pharmaceutical industry; however, the synthesis of these compounds is often difficult or impractical due to the sensitivity of the boron moiety, the requirement for metalation-borylation protocols, and lengthy syntheses. We report a straightforward, modular approach that enables access to complex examples of the BOB framework through a Rh-catalyzed [2 + 2 + 2] cycloaddition using MIDA-protected alkyne boronic acids. The key to the development of this methodology was overcoming the steric barrier to catalysis by leveraging chelation assistance. We show the utility of the method through synthesis of a broad range of BOB scaffolds, mechanistic information on the chelation effect, intramolecular alcohol-assisted BMIDA hydrolysis, and linear/cyclic BOB limits as well as comparative binding affinities of the product BOB frameworks for ribose-derived biomolecules.

Ligand Hydrogenation during Hydroformylation Catalysis Detected by In Situ High-Pressure Infra-Red Spectroscopic Analysis of a Rhodium/Phospholene-Phosphite Catalyst.

Phospholane-phosphites are known to show highly unusual selectivity towards branched aldehydes in the hydroformylation of terminal alkenes. This paper describes the synthesis of hitherto unknown unsaturated phospholene borane precursors and their conversion to the corresponding phospholene-phosphites. The relative stereochemistry of one of these ligands and its Pd complex was assigned with the aid of X-ray crystal structure determinations. These ligands were able to approach the level of selectivity observed for phospholane-phosphites in the rhodium-catalysed hydroformylation of propene. High-pressure infra-red (HPIR) spectroscopic monitoring of the catalyst formation revealed that whilst the catalysts showed good thermal stability with respect to fragmentation, the C=C bond in the phospholene moiety was slowly hydrogenated in the presence of rhodium and syngas. The ability of this spectroscopic tool to detect even subtle changes in structure, remotely from the carbonyl ligands, underlines the usefulness of HPIR spectroscopy in hydroformylation catalyst development.

Thermally activated delayed fluorescence emitters showing wide-range near-infrared piezochromism and their use in deep-red OLEDs.

Organic small molecules exhibiting both thermally activated delayed fluorescence (TADF) and wide-ranging piezochromism (Δλ > 150 nm) in the near-infrared region have rarely been reported in the literature. We present three emitters MeTPA-BQ, tBuTPA-BQ and TPPA-BQ based on a hybrid acceptor, benzo[g]quinoxaline-5,10-dione, that emit via TADF, having photoluminescence quantum yields, ΦPL, of 39-42% at photoluminescence (PL) maxima, λPL, of 625-670 nm in 2 wt% doped films in 4,4'-bis(N-carbazolyl)-1,1'-biphenyl (CBP). Despite their similar chemical structures, the PL properties in the crystalline states of MeTPA-BQ (λem = 735 nm, ΦPL = 2%) and tBuTPA-BQ (λem = 657 nm, ΦPL = 11%) are significantly different. Further, compounds tBuTPA-BQ and TPPA-BQ showed a significant PL shift of ∼98 and ∼165 nm upon grinding of the crystalline samples, respectively. Deep-red organic light-emitting diodes with MeTPA-BQ and tBuTPA-BQ were also fabricated, which showed maximum external quantum efficiencies, EQEmax, of 10.1% (λEL = 650 nm) and 8.5% (λEL = 670 nm), respectively.

The Covalent Linking of Organophosphorus Heterocycles to Date Palm Wood-Derived Lignin: Hunting for New Materials with Flame-Retardant Potential.

Environmentally acceptable and renewably sourced flame retardants are in demand. Recent studies have shown that the incorporation of the biopolymer lignin into a polymer can improve its ability to form a char layer upon heating to a high temperature. Char layer formation is a central component of flame-retardant activity. The covalent modification of lignin is an established technique that is being applied to the development of potential flame retardants. In this study, four novel modified lignins were prepared, and their char-forming abilities were assessed using thermogravimetric analysis. The lignin was obtained from date palm wood using a butanosolv pretreatment. The removal of the majority of the ester groups from this heavily acylated lignin was achieved via alkaline hydrolysis. The subsequent modification of the lignin involved the incorporation of an azide functional group and copper-catalysed azide-alkyne cycloaddition reactions. These reactions enabled novel organophosphorus heterocycles to be linked to the lignin. Our preliminary results suggest that the modified lignins had improved char-forming activity compared to the controls. 31P and HSQC NMR and small-molecule X-ray crystallography were used to analyse the prepared compounds and lignins.

Understanding divergent substrate stereoselectivity in the isothiourea-catalysed conjugate addition of cyclic α-substituted ß-ketoesters to α,ß-unsaturated aryl esters.

The development of enantioselective synthetic methods capable of generating vicinal stereogenic centres, where one is tetrasubstituted (such as either an all-carbon quaternary centre or where one or more substituents are heteroatoms), is a recognised synthetic challenge. Herein, the enantioselective conjugate addition of a range of carbo- and heterocyclic α-substituted ß-ketoesters to α,ß-unsaturated aryl esters using the isothiourea HyperBTM as a Lewis base catalyst is demonstrated. Notably, divergent diastereoselectivity is observed through the use of either cyclopentanone-derived or indanone-derived substituted ß-ketoesters with both generating the desired stereodefined products with high selectivity (>95 : 5 dr, up to 99 : 1 er). The scope and limitations of these processes are demonstrated, alongside application on gram scale. The origin of the divergent substrate selectivity has been probed through the use of DFT-analysis, with preferential orientation driven by dual stabilising CH⋯O interactions. The importance of solvation with strongly polar transition-states is highlighted and the SMD solvation model is demonstrated to capture solvation effects reliably.

A Convenient One-Pot Synthesis of a Sterically Demanding Aniline from Aryllithium Using Trimethylsilyl Azide, Conversion to ß-Diketimines and Synthesis of a ß-Diketiminate Magnesium Hydride Complex.

This work reports the one-pot synthesis of sterically demanding aniline derivatives from aryllithium species utilising trimethylsilyl azide to introduce amine functionalities and conversions to new examples of a common N,N'-chelating ligand system. The reaction of TripLi (Trip = 2,4,6-iPr3-C6H2) with trimethylsilyl azide afforded the silyltriazene TripN2N(SiMe3)2 in situ, which readily reacts with methanol under dinitrogen elimination to the aniline TripNH2 in good yield. The reaction pathways and by-products of the system have been studied. The extension of this reaction to a much more sterically demanding terphenyl system suggested that TerLi (Ter = 2,6-Trip2-C6H3) slowly reacted with trimethylsilyl azide to form a silyl(terphenyl)triazenide lithium complex in situ, predominantly underwent nitrogen loss to TerN(SiMe3)Li in parallel, which afforded TerN(SiMe3)H after workup, and can be deprotected under acidic conditions to form the aniline TerNH2. TripNH2 was furthermore converted to the sterically demanding ß-diketimines RTripnacnacH (=HC{RCN(Trip)}2H), with R = Me, Et and iPr, in one-pot procedures from the corresponding 1,3-diketones. The bulkiest proligand was employed to synthesise the magnesium hydride complex [{(iPrTripnacnac)MgH}2], which shows a distorted dimeric structure caused by the substituents of the sterically demanding ligand moieties.

(Z)-Benzyl 2-(5-methyl-2-oxoindolin-3-yl-idene)hydrazinecarbodi-thio-ate.

The title compound, C17H15N3OS2 was obtained from the condensation reaction of S-benzyl-dithio-carbazate and 5-methyl-isatin. In the solid-state, the mol-ecule adopts a Z configuration with the 5-methyl-isatin and di-thio-carbazate groups located on the same side of the C=N bond, involving an intra-molecular N-H⋯O hydrogen bond.

Low-Coordinate Magnesium Sulfide and Selenide Complexes.

The reactions of [{(iPrDipNacNac)Mg}2] 1 (iPrDipnacnac = HC(iPrCNDip)2) with Ph3P═O at 100 °C afforded the phosphinate complex [(iPrDipNacNac)Mg(OPPh3)(OPPh2)] 3. Reactions of 1 with Ph3P═E (E = S, Se) proceeded rapidly at room temperature to low-coordinate chalcogenide complexes [{(iPrDipNacNac)Mg}2(µ-S)] 4 and [{(iPrDipNacNac)Mg}2(µ-Se)] 5, respectively. Similarly, reactions of RNHC═S ((MeCNR)2C═S with R = Me, Et, or iPr) with 1 afforded NHC adducts of magnesium sulfide complexes, [{(iPrDipNacNac)Mg(RNHC)}(µ-S){Mg(iPrDipNacNac)}] 6, that could alternatively be obtained by adding the appropriate RNHC to sulfide complex 4. Complex 4 reacted with 1-adamantylazide (AdN3) to give [{(iPrDipNacNac)Mg}2(µ-SN3Ad)] 7 and can form various simple donor adducts in solution, of which [(iPrDipNacNac)Mg(OAd)}2(µ-S)] 8a (OAd = 2-adamantanone) was structurally characterized. The nature of the ionic Mg-E-Mg unit is described by solution and solid-state studies of the complexes and by DFT computational investigations.

Methyl 4-amino-3-meth-oxy-isoxazole-5-carboxyl-ate.

The title compound, C6H8N2O4, a new derivative of isoxazole, has been synthesized and structurally characterized. The crystal structure shows the mol-ecule to be almost planar (r.m.s. deviation for the non-hydrogen atoms = 0.029 Å), this conformation being supported by an intra-molecular N-H⋯O hydrogen bond. In the extended structure, the mol-ecules are linked by N-H⋯O hydrogen bonds into chains propagating along [010].

Phosphine and Selenoether peri-Substituted Acenaphthenes and Their Transition-Metal Complexes: Structural and NMR Investigations.

A series of peri-substituted acenaphthene-based phosphine selenoether bidentate ligands Acenap(iPr2P)(SeAr) (L1-L4, Acenap = acenaphthene-5,6-diyl, Ar = Ph, mesityl, 2,4,6-trisopropylphenyl and supermesityl) were prepared. The rigid acenaphthene framework induces a forced overlap of the phosphine and selenoether lone pairs, resulting in a large magnitude of through-space 4JPSe coupling, ranging from 452 to 545 Hz. These rigid ligands L1-L4 were used to prepare a series of selected late d-block metals, mercury, and borane complexes, which were characterized, including by multinuclear NMR and single-crystal X-ray diffraction. The Lewis acidic motifs (BH3, Mo(CO)4, Ag+, PdCl2, PtCl2, and HgCl2) bridge the two donor atoms (P and Se) in all but one case in the solid-state structures. Where the bridging motif contained NMR-active nuclei (11B, 107Ag, 109Ag, 195Pt, and 199Hg), JPM and JSeM couplings are observed directly, in addition to the altered JPSe in the respective NMR spectra. The solution NMR data are correlated with single-crystal diffraction data, and in the case of mercury(II) complexes, they are also correlated with the solid-state NMR data and coupling deformation density calculations. The latter indicate that the through-space interaction dominates in free L1, while in the L1HgCl2 complex, the main coupling pathway is via the metal atom and not through the carbon framework of the acenaphthene ring system.

Aryl (ß,ß',ß″-Trifluoro)-tert-butyl: A Candidate Motif for the Discovery of Bioactives.

The (ß,ß',ß″-trifluoro)-tert-butyl (TFTB) group has received very little attention in the literature. This work presents a direct synthesis of this group and explores its properties. The TFTB group arises when the methyl groups of a tert-butyl moiety are exchanged for fluoromethyl groups. Sequential fluoromethylations result in a decrease of Log P (increasing hydrophilicity), ultimately by 1.7 Log P units in the TFTB group relative to that of tert-butyl benzene itself. A focus is placed on synthetic transformations, conformational analysis, and metabolism of the TFTB group in the context of presenting a favorable profile as a motif for the discovery of bioactives.

Room-Temperature Multiple Phosphorescence from Functionalized Corannulenes: Temperature Sensing and Afterglow Organic Light-Emitting Diode.

Corannulene-derived materials have been extensively explored in energy storage and solar cells, however, are rarely documented as emitters in light-emitting sensors and organic light-emitting diodes (OLEDs), due to low exciton utilization. Here, we report a family of multi-donor and acceptor (multi-D-A) motifs, TCzPhCor, TDMACPhCor, and TPXZPhCor, using corannulene as the acceptor and carbazole (Cz), 9,10-dihydro-9,10-dimethylacridine (DMAC), and phenoxazine (PXZ) as the donor, respectively. By decorating corannulene with different donors, multiple phosphorescence is realized. Theoretical and photophysical investigations reveal that TCzPhCor shows room-temperature phosphorescence (RTP) from the lowest-lying T1 ; however, for TDMACPhCor, dual RTP originating from a higher-lying T1 (T1 H ) and a lower-lying T1 (T1 L ) can be observed, while for TPXZPhCor, T1 H -dominated RTP occurs resulting from a stabilized high-energy T1 geometry. Benefiting from the high-temperature sensitivity of TPXZPhCor, high color-resolution temperature sensing is achieved. Besides, due to degenerate S1 and T1 H states of TPXZPhCor, the first corannulene-based solution-processed afterglow OLEDs is investigated. The afterglow OLED with TPXZPhCor shows a maximum external quantum efficiency (EQEmax ) and a luminance (Lmax ) of 3.3 % and 5167 cd m-2 , respectively, which is one of the most efficient afterglow RTP OLEDs reported to date.

Mechanism of Cu-Catalyzed Iododeboronation: A Description of Ligand-Enabled Transmetalation, Disproportionation, and Turnover in Cu-Mediated Oxidative Coupling Reactions.

We report a combined experimental and computational study of the mechanism of the Cu-catalyzed arylboronic acid iododeboronation reaction. A combination of structural and density functional theory (DFT) analyses has allowed determination of the identity of the reaction precatalyst with insight into each step of the catalytic cycle. Key findings include a rationale for ligand (phen) stoichiometry related to key turnover events-the ligand facilitates transmetalation via H-bonding to an organoboron boronate generated in situ and phen loss/gain is integral to the key oxidative events. These data provide a framework for understanding ligand effects on these key mechanistic processes, which underpin several classes of Cu-mediated oxidative coupling reactions.

Cobalt-Catalyzed Wagner-Meerwein Rearrangements with Concomitant Nucleophilic Hydrofluorination.

We report a cobalt-catalyzed Wagner-Meerwein rearrangement of gem-disubstituted allylarenes that generates fluoroalkane products with isolated yields up to 84 %. Modification of the counteranion of the N-fluoropyridinium oxidant suggests the substrates undergo nucleophilic fluorination during the reaction. Subjecting the substrates to other known metal-mediated hydrofluorination procedures did not lead to observable 1,2-aryl migration. Thus, indicating the unique ability of these cobalt-catalyzed conditions to generate a sufficiently reactive electrophilic intermediate capable of promoting this Wagner-Meerwein rearrangement.

Enantioselective isothiourea-catalysed reversible Michael addition of aryl esters to 2-benzylidene malononitriles.

Catalytic enantioselective transformations usually rely upon optimal enantioselectivity being observed in kinetically controlled reaction processes, with energy differences between diastereoisomeric transition state energies translating to stereoisomeric product ratios. Herein, stereoselectivity resulting from an unusual reversible Michael addition of an aryl ester to 2-benzylidene malononitrile electrophiles using an isothiourea as a Lewis base catalyst is demonstrated. Notably, the basicity of the aryloxide component and reactivity of the isothiourea Lewis base both affect the observed product selectivity, with control studies and crossover experiments indicating the feasibility of a constructive reversible Michael addition from the desired product. When this reversible addition is coupled with a crystallisation-induced diastereomer transformation (CIDT) it allows isolation of products in high yield and stereocontrol (14 examples, up to 95 : 5 dr and 99 : 1 er). Application of this process to gram scale, plus derivatisations to provide further useful products, is demonstrated.

Synthesis of complex aryl MIDA boronates by Rh-catalyzed [2+2+2] cycloaddition.

A Rh-catalyzed [2+2+2] cycloaddition approach for the synthesis of BMIDA-functionalized arenes is reported. The developed method overcomes the long-standing reactivity problems associated with internal alkynes and allows access to highly functionalized borylated benzene scaffolds. The method is broadly functional group tolerant and generally high yielding. The utility of the products is demonstrated through elaboration of the BMIDA motif, and in the synthesis of fused heterocycles via intramolecular Chan-Lam etherification and amination. The dominance of sterically controlled reactivity is described.