In Situ Diffusion Measurements of a NASICON-Structured All-Solid-State Battery Using Muon Spin Relaxation.

In situ muon spin relaxation is demonstrated as an emerging technique that can provide a volume-averaged local probe of the ionic diffusion processes occurring within electrochemical energy storage devices as a function of state of charge. Herein, we present work on the conceptually interesting NASICON-type all-solid-state battery LiM2(PO4)3, using M = Ti in the cathode, M = Zr in the electrolyte, and a Li metal anode. The pristine materials are studied individually and found to possess low ionic hopping activation energies of ∼50-60 meV and competitive Li+ self-diffusion coefficients of ∼10-10-10-9 cm2 s-1 at 336 K. Lattice matching of the cathode and electrolyte crystal structures is employed for the all-solid-state battery to enhance Li+ diffusion between the components in an attempt to minimize interfacial resistance. The cell is examined by in situ muon spin relaxation, providing the first example of such ionic diffusion measurements. This technique presents an opportunity to the materials community to observe intrinsic ionic dynamics and electrochemical behavior simultaneously in a nondestructive manner.

Li1.5La1.5MO6 (M = W6+, Te6+) as a new series of lithium-rich double perovskites for all-solid-state lithium-ion batteries.

Solid-state batteries are a proposed route to safely achieving high energy densities, yet this architecture faces challenges arising from interfacial issues between the electrode and solid electrolyte. Here we develop a novel family of double perovskites, Li1.5La1.5MO6 (M = W6+, Te6+), where an uncommon lithium-ion distribution enables macroscopic ion diffusion and tailored design of the composition allows us to switch functionality to either a negative electrode or a solid electrolyte. Introduction of tungsten allows reversible lithium-ion intercalation below 1 V, enabling application as an anode (initial specific capacity >200 mAh g-1 with remarkably low volume change of ∼0.2%). By contrast, substitution of tungsten with tellurium induces redox stability, directing the functionality of the perovskite towards a solid-state electrolyte with electrochemical stability up to 5 V and a low activation energy barrier (<0.2 eV) for microscopic lithium-ion diffusion. Characterisation across multiple length- and time-scales allows interrogation of the structure-property relationships in these materials and preliminary examination of a solid-state cell employing both compositions suggests lattice-matching avenues show promise for all-solid-state batteries.

Benzo-Dipteridine Derivatives as Organic Cathodes for Li- and Na-ion Batteries.

Organic-based electrodes for Li- and Na-ion batteries present attractive alternatives to commonly applied inorganic counterparts which can often carry with them supply-chain risks, safety concerns with thermal runaway, and adverse environmental impact. The ability to chemically direct the structure of organic electrodes through control over functional groups is of particular importance, as this provides a route to fine-tune electrochemical performance parameters. Here, we report two benzo-dipteridine derivatives, BF-Me2 and BF-H2 , as high-capacity electrodes for use in Li- and Na-ion batteries. These moieties permit binding of multiple Li-ions per molecule while simultaneously ensuring low solubility in the supporting electrolyte, often a precluding issue with organic electrodes. Both display excellent electrochemical stability, with discharge capacities of 142 and 182 mAh g-1 after 100 cycles at a C/10 rate and Coulombic efficiencies of 96% and ∼ 100% demonstrated for BF-Me2 and BF-H2 , respectively. The application of a Na-ion cell has also been demonstrated, showing discharge capacities of 88.8 and 137 mAh g-1 after 100 cycles at a C/2 rate for BF-Me2 and BF-H2 , respectively. This work provides an encouraging precedent for these and related structures to provide versatile, high-energy density, and long cycle-life electrochemical energy storage materials.

A facile synthetic approach to nanostructured Li2S cathodes for rechargeable solid-state Li-S batteries.

Li-S solid state batteries, employing Li2S as a pre-lithiated cathode, present a promising low cost, high capacity and safer alternative to their liquid electrolyte counterparts, where dissolution of intermediate polysulfide species can result in loss of active material and a subsequent decrease in ionic conductivity. A nanostructured Li2S material would afford greater flexibility in optimising the cathode composite for more harmonious electrode-electrolyte interactions, yet facile routes to such nanoscale materials are limited. Here, we report a facile and scalable microwave approach to directly synthesize nanostructured Li2S from a glyme solution containing lithium polysulfides. As-synthesized Li2S presents an ideal architecture for the construction of free-standing cathodes for all-solid-state Li-S batteries.

Morphology-Directed Synthesis of LiFePO4 and LiCoPO4 from Nanostructured Li1+2 xPO3+ x.

A LiPO3-type nanostructure has been developed using a simple microwave approach at temperatures as low as 200 °C. This phase presents an ideal architecture for the morphology-directed synthesis of the olivine-type phases LiFePO4 and LiCoPO4, through a simple and scalable solution-based technique. Pure and carbon-composited olivine phases of interconnected nanoparticulate morphologies display excellent performance at high rates (up to 20 C) over 500 cycles in Li-ion battery cells.

Na1.5La1.5TeO6: Na+ conduction in a novel Na-rich double perovskite.

Increasing demand for lithium batteries for automotive applications, coupled with the necessity to move to large-scale energy storage systems, is driving a push towards new technologies and has seen Na-ion batteries emerge as a leading alternative to Li-ion. Amongst these, all solid-state configurations represent a promising route to achieving higher energy densities and increased safety. Remaining challenges include the need for Na+ solid electrolytes with the requisite ionic conductivities crucial for use in a solid-state cell. Here, we present the novel Na-rich double perovskite, Na1.5La1.5TeO6. The transport properties, explored at the macroscopic and local level, reveal a low activation energy barrier for Na+ diffusion and great promise for use as an electrolyte for all solid-state Na-batteries.

Selective and Facile Synthesis of Sodium Sulfide and Sodium Disulfide Polymorphs.

Na2S and Na2S2 were selectively synthesized using a microwave-assisted thermal treatment of a Na+/S solution in tetraglyme between 100 and 200 °C, considerably lower than that of current routes. This novel synthetic pathway yields the Na2S phase in high purity and allows for good selectivity between the polymorphs of Na2S2 (α and ß phases). These materials show promising electrochemical properties and are particularly interesting for the continued development of Na-S batteries.

Mechanistic insights of Li+ diffusion within doped LiFePO4 from Muon Spectroscopy.

The Li+ ion diffusion characteristics of V- and Nb-doped LiFePO4 were examined with respect to undoped LiFePO4 using muon spectroscopy (µSR) as a local probe. As little difference in diffusion coefficient between the pure and doped samples was observed, offering DLi values in the range 1.8-2.3 × 10-10 cm2 s-1, this implied the improvement in electrochemical performance observed within doped LiFePO4 was not a result of increased local Li+ diffusion. This unexpected observation was made possible with the µSR technique, which can measure Li+ self-diffusion within LiFePO4, and therefore negated the effect of the LiFePO4 two-phase delithiation mechanism, which has previously prevented accurate Li+ diffusion comparison between the doped and undoped materials. Therefore, the authors suggest that µSR is an excellent technique for analysing materials on a local scale to elucidate the effects of dopants on solid-state diffusion behaviour.

Enhancement of the lithium ion conductivity of Ta-doped Li7La3Zr2O12 by incorporation of calcium.

Fast ion conducting garnet materials have been identified as promising electrolytes for all solid-state batteries. However, reliable synthetic routes to materials with fully elucidated cation site occupancies where an enhancement in lithium conductivity is observed remains a challenge. Ca-Incorporation is developed here as a promising approach to enhance the ionic conductivity of garnet-type Li7-xLa3Zr2-xTaxO12 phases. Here we present a new sol-gel synthetic strategy as a facile route to the preparation of materials of a desired stoichiometry optimized for Li+ conductivity. We have found that the ionic conductivity of Li6.4La3Zr1.4Ta0.6O12 is increased by a factor of four by the addition of 0.2 mol of Ca per formula unit. Ca is incorporated in the garnet lattice where it has no effect on the sinterability of the material and is predominately located at the La sites. We anticipate that the ease of our synthetic route and the phases presented here represents a starting point for the further realization of solid state electrolyte compositions with similarly high Li+ conductivities using this methodology.

Fast microwave treatments of single source alkoxides for nanostructured Li-ion battery electrodes.

Microwave or ultrasonic treatment of metal alkoxides presents a fast, low cost route to both anode and cathode nanomaterials for Li-ion battery applications. Here, we demonstrate the formation of LiMPO4 (M = Fe, Mn) and Mn3O4 nanostructures via this simple route which exhibit excellent electrochemical performances. This approach opens up a new avenue for the targeted design of nanostructured materials, where co-location of the desired metals in a single starting material shortens reaction times and temperatures since there is a decrease in diffusional energy requirements usually needed for these reactions to proceed.

Microwave-assisted synthesis and electrochemical evaluation of VO2 (B) nanostructures.

Understanding how intercalation materials change during electrochemical operation is paramount to optimizing their behaviour and function and in situ characterization methods allow us to observe these changes without sample destruction. Here we first report the improved intercalation properties of bronze phase vanadium dioxide VO2 (B) prepared by a microwave-assisted route which exhibits a larger electrochemical capacity (232 mAh g(-1)) compared with VO2 (B) prepared by a solvothermal route (197 mAh g(-1)). These electrochemical differences have also been followed using in situ X-ray absorption spectroscopy allowing us to follow oxidation state changes as they occur during battery operation.

Two applications of solid phantoms in performance assessment of optical coherence tomography systems.

Virtual tissues (phantoms) are widely used for performance evaluation of imaging systems. Specific design of the phantom is necessary for the correct assessment of a system's parameters. In an effort to reduce the amount of time and energy spent making application-oriented phantoms, we describe procedures to make epoxy-resin solid phantoms based on Mie scattering theory, with two different scatterers: polystyrene and gold microspheres. The phantoms are specifically designed to be used in two applications: (a) the gold microspheres solid phantoms are used to estimate the point-spread function (PSF) of an optical coherence tomography (OCT) system, and (b) the polystyrene solid phantom are used to evaluate the performance of an OCT-images optical properties extraction (OPE) algorithm. Phantoms with differing combination of materials have been tested to achieve the most suitable combination for producing an accurate PSF for application (a) and a valid evaluation/parameter optimization of the algorithm in application (b). An en face time-domain dynamic focus OCT is used for imaging.

Porphyrin-magnetite nanoconjugates for biological imaging.

BACKGROUND: The use of silica coated magnetic nanoparticles as contrast agents has resulted in the production of highly stable, non-toxic solutions that can be manipulated via an external magnetic field. As a result, the interaction of these nanocomposites with cells is of vital importance in understanding their behaviour and biocompatibility. Here we report the preparation, characterisation and potential application of new "two-in-one" magnetic fluorescent nanocomposites composed of silica-coated magnetite nanoparticles covalently linked to a porphyrin moiety. METHOD: The experiments were performed by administering porphyrin functionalised silica-coated magnetite nanoparticles to THP-1 cells, a human acute monocytic leukaemia cell line. Cells were cultured in RPMI 1640 medium with 25 mM HEPES supplemented with heat-inactivated foetal bovine serum (FBS). RESULTS: We have synthesised, characterised and analysed in vitro, a new multimodal (magnetic and fluorescent) porphyrin magnetic nanoparticle composite (PMNC). Initial co-incubation experiments performed with THP-1 macrophage cells were promising; however the PMNC photobleached under confocal microscopy study. ß-mercaptoethanol (ß-ME) was employed to counteract this problem and resulted not only in enhanced fluorescence emission, but also allowed for elongated imaging and increased exposure times of the PMNC in a cellular environment. CONCLUSION: Our experiments have demonstrated that ß-ME visibly enhances the emission intensity. No deleterious effects to the cells were witnessed upon co-incubation with ß-ME alone and no increases in background fluorescence were recorded. These results should present an interest for further development of in vitro biological imaging techniques.

NMR studies into colloidal stability and magnetic order in fatty acid stabilised aqueous magnetic fluids.

We report the physico-chemical characterisation of fatty acid stabilised aqueous magnetic fluids, which are ideal systems for studying the influence of nanoparticle aggregation on the emergent magnetic resonance properties of the suspensions. Stable colloids of superparamagnetic magnetite, Fe(3)O(4), nanoparticle clusters in the 80 to 100 nm size range were produced by in situ nanoparticle growth and stabilisation, and by suspending pre-formed nanoparticles. NMR relaxation analysis shows that the magnetic resonance properties of the two types of suspension differ substantially and provides new insights into how the relaxation mechanisms are determined by the organisation of the nanoparticles within the clusters.

Real-space investigation of structural changes at the metal-insulator transition in VO2.

Synchrotron x-ray total scattering studies of structural changes in rutile VO2 at the metal-insulator transition temperature of 340 K reveal that monoclinic and tetragonal phases of VO2 coexist in equilibrium, as expected for a first-order phase transition. No evidence for any distinct intermediate phase is seen. Unbiased local structure studies of the changes in V-V distances through the phase transition, using reverse Monte Carlo methods, support the idea of phase coexistence and point to the high degree of correlation in the dimerized low-temperature structure. No evidence for short-range V-V correlations that would be suggestive of local dimers is found in the metallic phase.

Ordered mesoporous metallic MoO2 materials with highly reversible lithium storage capacity.

Highly ordered mesoporous crystalline MoO(2) materials with bicontinuous Ia3d mesostructure were synthesized by using phosphomolybdic acid as a precursor and mesoporous silica KIT-6 as a hard template in a 10% H(2) atmosphere via nanocasting strategy. The prepared mesoporous MoO(2) material shows a typical metallic conductivity with a low resistivity ( approximately 0.01Omega cm at 300 K), which makes it different from all previously reported mesoporous metal oxides materials. Primary test found that mesoporous MoO(2) material exhibits a reversible electrochemical lithium storage capacity as high as 750 mA h g(-1) at C/20 after 30 cycles, rendering it as a promising anode material for lithium ion batteries.

Linear assemblies of magnetic nanoparticles as MRI contrast agents.

Using a one-step procedure we have prepared magnetic fluids comprising of polyelectrolyte stabilized magnetite nanoparticles. These nanocomposites are comprised of linear, chain-like assemblies of magnetic nanoparticles, which can be aligned in parallel arrays by an external magnetic field. We have shown the potential use of these materials as contrast agents by measuring their MR response in live rats. The new magnetic fluids have demonstrated good biocompatibility and potential for in vivo MRI diagnostics.