Halogen- and hydrogen-bonded self-assembled fibrillar networks of substituted 1,3:2,4-dibenzylidene-D-sorbitols (DBS).

Substituting the sole primary hydroxyl group of the low molecular weight organogelator (LMOG), 1,3:2,4-dibenzylidene-D-sorbitol (DBS), with a halogen atom (Cl, Br, or I; i.e., 6-Cl-DBS, 6-Br-DBS, or 6-I-DBS) drastically alters the supramolecular self-assembled fibrillar network (SAFiN) that forms when the molecules aggregate. The SAFiN varies depending on the solvent properties, impacting the role of non-covalent hydrogen- and halogen-bonding interactions along and between fibers. The halogenated DBS derivatives have more coherent crystalline fibers than DBS, with larger length-to-width aspect ratios. High-resolution synchrotron powder X-ray diffraction of each wet-state gel in toluene and DFT optimization obtained complete structures for the three halogenated DBS derivatives in their SAFiNs. The presence of a halogen atom reduces the reliance on hydrogen bonding by enabling new halogen bonding interactions that impact the self-assembly behavior, especially in solvents of higher polarity. For 6-I-DBS and 6-Br-DBS, the primary forces driving molecular self-assembly are C-H⋯π and intermolecular halogen-to-halogen interactions, and there is one unique molecule in each unit cell. However, the Cl atoms of 6-Cl-DBS are not close, and its SAFiN structures rely more on hydrogen bonding. As a result, the enhanced hydrogen bonding, electronic differences among the halogens, and spatial factors allow its unit cell to include two independent molecules of 6-Cl-DBS.

Mixed cyclo di-amino acids structured edible oils: a potential hardstock fat mimic.

Pure cyclic diamino acids (CdAA) gel differently than combinations of CdAAs, altering the gelation behavior to highly-branched colloidal protein crystal networks reminiscent of traditional fat crystal networks in canola oil, making it an exciting structuring agent for unsaturated oils.

A data-driven model-free adaptive controller with application to wind turbines.

A data-driven controller is presented in this paper, which stems from the well known model-free adaptive control approach based on an equivalent linearized dynamical model of the plant. Inspired by the recent paper (Liu and Yang, 2019), the output tracking problem is here solved by a data-driven adaptive sliding-mode controller simultaneously ensuring prescribed performance constraints. To allow a rigorous stability analysis, the sliding variable, and the consequently derived controller, have been redesigned with respect to the inspiring paper. A proper setting of the gain of the discontinuous term is shown necessary to ensure closed loop stability. Validation of the technique has been extensively performed on the well assessed high-fidelity tool FAST (NREL) to solve the efficiency maximization problem using the proposed approach for a 5 MW wind turbine operating in the medium wind speed region.

Lipid crystallinity of oil-in-water emulsions alters in vitro.

10 wt% oil-in-water emulsions with varied palm olein and stearin PO:PS ratios stabilized with 0.8 wt% Tween80 and tempered to obtain partially crystalline (CR) droplets (cooled from 80 to 4 °C and held overnight to induce nucleation/crystallization) or undercooled liquid (UC) droplets (cooled from 80 °C to 37 °C) produced emulsions with constant droplet size and polymorphism. However, zeta-potential decreased in undercooled emulsions due to crystallization/orientation of interfacial Tween, increasing alignment and ultimately a greater dipole moment. Significant differences in overall bioaccessibility between PO and PS present for the CR (PO bioaccessible fraction was 91%, whereas PS was 60%) and UC emulsions (PO and PS bioaccessibility were 96% and 77%).When only the solid fat content differs, and all other physical attributes remain constant, lipid digestibility decreases with increasing solid fat content; these findings, along with others, can be employed during food formulation and design more healthful foods.

Sous Vide Cook Temperature Alters the Physical Structure and Lipid Bioaccessibility of Beef Longissimus Muscle in TIM-1.

Changes in the physical states, induced with different sous vide cooking temperatures, significantly (P < 0.05) altered lipid bioaccessibility measured in the TNO-simulated gastrointestinal tract model-1 of AAA boneless beef striploin, containing the longissimus lumborum muscle. The denaturation of actin significantly correlates with the total cumulative free fatty acid (FFA) bioaccessibility, whereby the striploin cooked to 60 °C presents the maximum lipid bioaccessibility (15.8 ± 1.0%), rate constant (ka) for FFA hydrolysis (0.087 ± 0.003 min-1), and greatest actin denaturation enthalpy (-0.57 ± 0.06 ΔH). Thus, thermal treatments above 60 °C significantly decrease the kinetics of lipolysis (70 °C = 0.042 ± 0.002 min-1 and 80 °C = 0.047 ± 0.002 min-1) and the resultant total lipid bioaccessibility (70 °C = 8.6 ± 0.7 and 80 °C = 8.3 ± 0.5%). This research highlights the potential to manipulate the physical food structure to alter digestion kinetics, supporting the need to understand supramolecular structures in food and their nutritional outcomes.

Pitch angle control of a wind turbine operating above the rated wind speed: A sliding mode control approach.

The paper focuses on variable-rotor-speed/variable-blade-pitch wind turbines operating in the region of high wind speeds, where control is aimed at limiting the turbine energy capture to the rated power value. A robust sliding mode approach is proposed, using the blade pitch as control input, in order to regulate the rotor speed to a fixed rated value, in the presence of uncertainties characterizing the wind turbine model. Closed loop convergence of the overall control system is proved. The proposed control solution has been validated on a 5-MW three-blade wind turbine using the National Renewable Energy Laboratory (NREL) wind turbine simulator FAST (Fatigue, Aerodynamics, Structures, and Turbulence) code. A comparison with the standard FAST baseline controller (NWTC 2012 and Jonkman et al. 2009) has been also included.

A comprehensive perspective of food nanomaterials.

Nanotechnology is a rapidly developing toolbox that provides solutions to numerous challenges in the food industry and meet public demands for healthier and safer food products. The diversity of nanostructures and their vast, tunable functionality drives their inclusion in food products and packaging materials to improve their nutritional quality through bioactive fortification and probiotics encapsulation, enhance their safety due to their antimicrobial and sensing capabilities and confer novel sensorial properties. In this food nanotechnology state-of-the-art communication, matrix materials with particular focus on food-grade components, existing and novel production techniques, and current and potential applications in the fields of food quality, safety and preservation, nutrient bioaccessibility and digestibility will be detailed. Additionally, a thorough analysis of potential strategies to assess the safety of these novel nanostructures is presented.

To gel or not to gel: correlating molecular gelation with solvent parameters.

Rational design of small molecular gelators is an elusive and herculean task, despite the rapidly growing body of literature devoted to such gels over the past decade. The process of self-assembly, in molecular gels, is intricate and must balance parameters influencing solubility and those contrasting forces that govern epitaxial growth into axially symmetric elongated aggregates. Although the gelator-gelator interactions are of paramount importance in understanding gelation, the solvent-gelator specific (i.e., H-bonding) and nonspecific (dipole-dipole, dipole-induced and instantaneous dipole induced forces) intermolecular interactions are equally important. Solvent properties mediate the self-assembly of molecular gelators into their self-assembled fibrillar networks. Herein, solubility parameters of solvents, ranging from partition coefficients (log P), to Henry's law constants (HLC), to solvatochromic parameters (ET(30)), and Kamlet-Taft parameters (ß, α and π), and to Hansen solubility parameters (δp, δd, δh), are correlated with the gelation ability of numerous classes of molecular gelators. Advanced solvent clustering techniques have led to the development of a priori tools that can identify the solvents that will be gelled and not gelled by molecular gelators. These tools will greatly aid in the development of novel gelators without solely relying on serendipitous discoveries. These tools illustrate that the quest for the universal gelator should be left in the hands of Don Quixote and as researchers we must focus on identifying gelators capable of gelling classes of solvents as there is likely no one gelator capable of gelling all solvents.

Micro-viscosity of liquid oil confined in colloidal fat crystal networks.

Molecular rotors may be utilized as non-invasive, non-disruptive and highly sensitive alternatives to conventional measures of bulk viscosity when the oil is entrained in a colloidal fat crystal network. Oil viscosity changes based on the molecular confinement of the oil, which is dependent on its molecular volume. Changes in micro-viscosity were not dependent on the solids content, but instead were strongly dependent on the box-counting fractal dimension in high-space filling colloidal fat crystal networks (i.e., D > 1.89). A bulk oil viscosity is often an overestimation of the actual viscosity of the entrained oil and may not be appropriate when predicting diffusion in multi-phase materials.

Differential diagnosis of Raynaud's phenomenon based on modeling of finger thermoregulation.

Raynaud's phenomenon (RP) is a vasospastic disorder of small arteries, pre-capillary arteries, and cutaneous arteriovenous shunts of the extremities, typically induced by cold exposure and emotional stress. RP is either primary (PRP) or secondary to connective tissue diseases such as systemic sclerosis (SSc). Early differential diagnosis is crucial in order to set the proper therapeutic strategy. To this goal, thermal infrared imaging data from 18 healthy controls (HCs) and 48 RP patients (20 PRP, 28 SSc) were processed through a model for a second-order time-invariant system with exponential critically damped dynamic response. Subject classification on the basis of the model parameters provides 100% true-positive discrimination for RP patients (PRP and SSc) and healthy, and 90% of correct classification within the group of patients. The proposed method may provide useful hints for early differential diagnosis in the assessment of RP disease.

Influence of emulsifier structure on lipid bioaccessibility in oil-water nanoemulsions.

The influence of several nonionic surfactants (Tween-20, Tween-40, Tween-60, Span-20, Span-60, or Span-80) and anionic surfactants (sodium lauryl sulfate, sodium stearoyl lactylate, and sodium stearyl fumarate) showed drastic differences in the rank order of lipase activity/lipid bioaccessibility. The biophysical composition of the oil and water interface has a clear impact on the bioaccessibility of fatty acids (FA) by altering the interactions of lipase at the oil-water interface. It was found that the bioaccessibility was positively correlated with the hydrophilic/lipophilic balance (HLB) of the surfactant and inversely correlated to the surfactant aliphatic chain length. Furthermore, the induction time in the jejunum increased as the HLB value increased and decreased with increasing aliphatic chain length. The rate of lipolysis slowed in the jejunum with increasing HLB and with increasing aliphatic chain length.

Thorotrast: analysis of the time evolution of its α activity concentration, in the 70 years following the chemical purification of Thorium.

We simulate the α-activity of the Thorium series elements present in the contrast medium named Thorotrast, used until 1960 and cause of certified deaths until today. Assuming, as active components at t=0, (232)Th and (228)Th in the same relative concentration they have in nature, α-activity oscillates for some decades before reaching a stationary value that in absence of biological depletion would be AST =24000Bq/g. Our Montecarlo code generates the nuclear decays of the Thorium series with and without in-vivo biological depletion, arriving to three kinds of results for the activity: 1) Theoretical activity concentration (no biological depletion). Our result is fitted by: A(t)=A(ST).{[1-exp(-t/10)]+[exp(-t/tB)(1-0.8exp(-t/tA))]}, with t in years, tA=1.07.10(-2) years, and tB=2.38 years. 2) Weak biological depletion (228Ra/232 Th equilibrium activity ratio 0.6, 224Ra/228Ra e.a.r 0.9, 10% excretion for 220Rn). The ratio of the activity concentration to the theoretical activity concentration is fitted by: A weak (t)/A(t)=0.61+0.29 exp[-(t/15)2] (t in years). 3) Strong biological depletion (228Ra/232Th e.a.r 0.4, 224Ra/228Ra e.a.r. 0.8, 10% excretion for 220Rn). The ratio of the activity concentration to the theoretical activity concentration is fitted by A(strong)(t)/A(t)=0.44+0.4 exp[-(t/13)2](t in years). We also report fluctuation calculation for two cases where standard statistical behavior is not expected.

Occurrence of toxic cyanobacterial blooms in rio de la plata estuary, Argentina: field study and data analysis.

Water samples were collected during 3 years (2004-2007) at three sampling sites in the Rio de la Plata estuary. Thirteen biological, physical, and chemical parameters were determined on the water samples. The presence of microcystin-LR in the reservoir samples, and also in domestic water samples, was confirmed and quantified. Microcystin-LR concentration ranged between 0.02 and 8.6 µg.L(-1). Principal components analysis was used to identify the factors promoting cyanobacteria growth. The proliferation of cyanobacteria was accompanied by the presence of high total and fecal coliforms bacteria (>1500 MNP/100 mL), temperature ≥25°C, and total phosphorus content ≥1.24 mg·L(-1). The observed fluctuating patterns of Microcystis aeruginosa, total coliforms, and Microcystin-LR were also described by probabilistic models based on the log-normal and extreme value distributions. The sampling sites were compared in terms of the distribution parameters and the probability of observing high concentrations for Microcystis aeruginosa, total coliforms, and microcystin-LR concentration.

Tratamiento de la úlcera crónica isquiática en el paciente pediátrico refractaria a medidas Convencionales / Treatment of chronic ischial ulcer in the pediatric patient refractory to conventional treatments

Antecedentes. La úlcera por presión es una patología emergente, dada la mayor supervivencia de los pacientes pediátricos en riesgo de padecerla (mielomeningocele, afectos de parálisis cerebral infantil, parapléjicos, prematuros con secuelas neurológicas, etc.), así como los largos tiempos de estancia de los pacientes críticos ingresados en unidades de cuidados intensivos. Objetivos. Proporcionar un tratamiento definitivo de la úlcera por presión refractaria a procedimientos de desbridamiento. Métodos. Se utilizó la técnica de colgajo muscular de bíceps crural asociado a colgajo fasciocutáneo en dos pacientes; la primera, de 16años, con tetraparesia secundaria a parálisis cerebral infantil y la segunda, de 18 años, con secuelas de mielomeningocele lumbosacro. Ambas presentaban úlceras isquiáticas refractarias al tratamiento habitual, de2 y 3 años de evolución, respectivamente. Resultados. El resultado fue óptimo en ambos casos, con curacióndefinitiva de la úlcera y no reaparición de la misma durante uno y dos (..) (AU)

Background. Pressure ulcers are an emerging disease, due to survival increase of pediatric patients at risk (myelomeningocele, infantilecerebral paralysis, paraplegic, prematures with neurological sequelae,etc.), including as well, long time staging patients at intensive care units. Objectives: Provide for long-term treatment to pressure ulcer refractory to debridement procedures. Methods: We used the biceps femoris muscular flap technique associated with fasciocutaneous flap in two patients, 16 year-olded, with tetraparesis secondary to cerebral palsy and, another 18 year-olded, with myelomeningocele sequelae. Both had sciatic ulcers refractory to treatment, 2 and 3 years evolutioned, respectively. Results: The outcome was excellent in both cases, with definitive healing of the ulcer and no recurrence during one and two month (..) (AU)

Synthesis of cold antihydrogen in a cusp trap.

We report here the first successful synthesis of cold antihydrogen atoms employing a cusp trap, which consists of a superconducting anti-Helmholtz coil and a stack of multiple ring electrodes. This success opens a new path to make a stringent test of the CPT symmetry via high precision microwave spectroscopy of ground-state hyperfine transitions of antihydrogen atoms.

[Treatment of chronic ischial ulcer in the pediatric patient refractory to conventional treatments]. / Tratamiento de la úlcera crónica isquiática en el paciente pediátrico refractaria a medidas convencionales.

BACKGROUND: Pressure ulcers are an emerging disease, due to survival increase of pediatric patients at risk (myelomeningocele, infantile cerebral paralysis, paraplegic, prematures with neurological sequelae, etc.), including as well, long time staging patients at intensive care units. OBJECTIVES: Provide for long-term treatment to pressure ulcer refractory to debridement procedures. METHODS: We used the biceps femoris muscular flap technique associated with fasciocutaneous flap in two patients, 16 year-olded, with tetraparesis secondary to cerebral palsy and, another 18 year-olded, with myelomeningocele sequelae. Both had sciatic ulcers refractory to treatment, 2 and 3 years evolutioned, respectively. RESULTS: The outcome was excellent in both cases, with definitive healing of the ulcer and no recurrence during one and two month follow-up. CONCLUSIONS: This technique, used in adults, can be applied to pediatric patients if no possibility of wandering. Muscle acts as a cuff between bone and skin and provides coating to the zone suffering pressure as an hypervascularized and no-functioning for active movement structure, but feasible in terms of trophism.

Extracting survival parameters from isothermal, isobaric, and "iso-concentration" inactivation experiments by the "3 end points method".

Theoretically, if an organism's resistance can be characterized by 3 survival parameters, they can be found by solving 3 simultaneous equations that relate the final survival ratio to the lethal agent's intensity. (For 2 resistance parameters, 2 equations will suffice.) In practice, the inevitable experimental scatter would distort the results of such a calculation or render the method unworkable. Averaging the results obtained with more than 3 final survival ratio triplet combinations, determined in four or more treatments, can remove this impediment. This can be confirmed by the ability of a kinetic inactivation model derived from the averaged parameters to predict survival patterns under conditions not employed in their determination, as demonstrated with published isothermal survival data of Clostridium botulinum spores, isobaric data of Escherichia coli under HPP, and Pseudomonas exposed to hydrogen peroxide. Both the method and the underlying assumption that the inactivation followed a Weibull-Log logistic (WeLL) kinetics were confirmed in this way, indicating that when an appropriate survival model is available, it is possible to predict the entire inactivation curves from several experimental final survival ratios alone. Where applicable, the method could simplify the experimental procedure and lower the cost of microbial resistance determinations. In principle, the methodology can be extended to deteriorative chemical reactions if they too can be characterized by 2 or 3 kinetic parameters.

Touch or pain? Spatio-temporal patterns of cortical fMRI activity following brief mechanical stimuli.

Most imaging studies on the human pain system have concentrated so far on the spatial distribution of pain-related activity. In the present study, we investigated similarities and differences between the spatial and temporal patterns of brain activity related to touch vs. pain perception. To this end, we adopted an event-related functional magnetic resonance imaging (fMRI) paradigm allowing us to separately assess the activity related to stimulus anticipation, perception, and coding. The fMRI signal increases following brief mechanical noxious or non-noxious stimulation of the hand dorsum were largely overlapping in the contralateral and ipsilateral hemispheres, including portions of the parietal, insular, frontal and cingulate cortices. Higher activity following noxious stimulation was found in the contralateral mid-anterior insular cortex, in the anterior mid-cingulate cortex (aMCC) and in the adjacent dorso-medial frontal cortex. Significant decreases in fMRI signals following both tactile and painful stimuli were found in perigenual cingulate (pACC)/medial prefrontal cortex (MPF) and in the posterior cingulate/precuneus/paracentral lobule; more intense decreases were found in the pACC/MPF following painful stimuli. fMRI signal increases in the contralateral insula and in aMCC, but not in the parietal cortex, were more prolonged following painful than tactile stimuli. Moreover, a second peak of signal increases (albeit of lower intensity) was found in anterior insula and aMCC during pain intensity rating. These results show specific spatio-temporal patterns of cortical activity related to processing noxious vs. non-noxious mechanical stimuli.

New reactor technology: safety improvements in nuclear power systems.

Almost 450 nuclear power plants are currently operating throughout the world and supplying about 17% of the world's electricity. These plants perform safely, reliably, and have no free-release of byproducts to the environment. Given the current rate of growth in electricity demand and the ever growing concerns for the environment, nuclear power can only satisfy the need for electricity and other energy-intensive products if it can demonstrate (1) enhanced safety and system reliability, (2) minimal environmental impact via sustainable system designs, and (3) competitive economics. The U.S. Department of Energy with the international community has begun research on the next generation of nuclear energy systems that can be made available to the market by 2030 or earlier, and that can offer significant advances toward these challenging goals; in particular, six candidate reactor system designs have been identified. These future nuclear power systems will require advances in materials, reactor physics, as well as thermal-hydraulics to realize their full potential. However, all of these designs must demonstrate enhanced safety above and beyond current light water reactor systems if the next generation of nuclear power plants is to grow in number far beyond the current population. This paper reviews the advanced Generation-IV reactor systems and the key safety phenomena that must be considered to guarantee that enhanced safety can be assured in future nuclear reactor systems.

[Occupational contact dermatitis in metal workers and gender effect]. / Dermatiti professionali nei metalmeccanici ed effetto di genere.

Contact dermatitis is more frequent among women for anatomical reasons and for extraprofessional exposure to irritants and detergents during homeworks. In addition sensitisation to contact haptens is different in sexes. The aim of our work was to evaluate the association between patch test skin sensitizations and professional exposure to metals analyzing data for gender. Of the 15.217 patients patch tested for dermatitis, 678 were metalworkers. The statistical analysis revealed a significant association between dermatitis and sensitisation to nickel in professional exposed women (OR = 1.68; LC50% 1.11-6.50) while metal sensitisation (Cr.Ni and Co) was not relevant in men: for them a significant association between dermatitis and sensitisation was found to quaternium (OR = 3.91; LC95% 1.18-12.9), to mercaptobenzothiazole (OR = 2.69; LC50% 1.11-6.50) and to ethylendiamine dichloride (OR = 2.53; LC95% 1-6.41). The authors stress the need to evaluate patch test sensitisation considering gender effects.