RESUMO
Substituting the sole primary hydroxyl group of the low molecular weight organogelator (LMOG), 1,3:2,4-dibenzylidene-D-sorbitol (DBS), with a halogen atom (Cl, Br, or I; i.e., 6-Cl-DBS, 6-Br-DBS, or 6-I-DBS) drastically alters the supramolecular self-assembled fibrillar network (SAFiN) that forms when the molecules aggregate. The SAFiN varies depending on the solvent properties, impacting the role of non-covalent hydrogen- and halogen-bonding interactions along and between fibers. The halogenated DBS derivatives have more coherent crystalline fibers than DBS, with larger length-to-width aspect ratios. High-resolution synchrotron powder X-ray diffraction of each wet-state gel in toluene and DFT optimization obtained complete structures for the three halogenated DBS derivatives in their SAFiNs. The presence of a halogen atom reduces the reliance on hydrogen bonding by enabling new halogen bonding interactions that impact the self-assembly behavior, especially in solvents of higher polarity. For 6-I-DBS and 6-Br-DBS, the primary forces driving molecular self-assembly are C-Hâ¯π and intermolecular halogen-to-halogen interactions, and there is one unique molecule in each unit cell. However, the Cl atoms of 6-Cl-DBS are not close, and its SAFiN structures rely more on hydrogen bonding. As a result, the enhanced hydrogen bonding, electronic differences among the halogens, and spatial factors allow its unit cell to include two independent molecules of 6-Cl-DBS.
RESUMO
Pure cyclic diamino acids (CdAA) gel differently than combinations of CdAAs, altering the gelation behavior to highly-branched colloidal protein crystal networks reminiscent of traditional fat crystal networks in canola oil, making it an exciting structuring agent for unsaturated oils.
RESUMO
10 wt% oil-in-water emulsions with varied palm olein and stearin PO:PS ratios stabilized with 0.8 wt% Tween80 and tempered to obtain partially crystalline (CR) droplets (cooled from 80 to 4 °C and held overnight to induce nucleation/crystallization) or undercooled liquid (UC) droplets (cooled from 80 °C to 37 °C) produced emulsions with constant droplet size and polymorphism. However, zeta-potential decreased in undercooled emulsions due to crystallization/orientation of interfacial Tween, increasing alignment and ultimately a greater dipole moment. Significant differences in overall bioaccessibility between PO and PS present for the CR (PO bioaccessible fraction was 91%, whereas PS was 60%) and UC emulsions (PO and PS bioaccessibility were 96% and 77%).When only the solid fat content differs, and all other physical attributes remain constant, lipid digestibility decreases with increasing solid fat content; these findings, along with others, can be employed during food formulation and design more healthful foods.
Assuntos
Polissorbatos , Água , Cristalização , Digestão , Emulsões/química , Tamanho da Partícula , Polissorbatos/química , Água/químicaRESUMO
Changes in the physical states, induced with different sous vide cooking temperatures, significantly (P < 0.05) altered lipid bioaccessibility measured in the TNO-simulated gastrointestinal tract model-1 of AAA boneless beef striploin, containing the longissimus lumborum muscle. The denaturation of actin significantly correlates with the total cumulative free fatty acid (FFA) bioaccessibility, whereby the striploin cooked to 60 °C presents the maximum lipid bioaccessibility (15.8 ± 1.0%), rate constant (ka) for FFA hydrolysis (0.087 ± 0.003 min-1), and greatest actin denaturation enthalpy (-0.57 ± 0.06 ΔH). Thus, thermal treatments above 60 °C significantly decrease the kinetics of lipolysis (70 °C = 0.042 ± 0.002 min-1 and 80 °C = 0.047 ± 0.002 min-1) and the resultant total lipid bioaccessibility (70 °C = 8.6 ± 0.7 and 80 °C = 8.3 ± 0.5%). This research highlights the potential to manipulate the physical food structure to alter digestion kinetics, supporting the need to understand supramolecular structures in food and their nutritional outcomes.
Assuntos
Culinária , Lipídeos , Animais , Bovinos , Músculos , TemperaturaRESUMO
Nanotechnology is a rapidly developing toolbox that provides solutions to numerous challenges in the food industry and meet public demands for healthier and safer food products. The diversity of nanostructures and their vast, tunable functionality drives their inclusion in food products and packaging materials to improve their nutritional quality through bioactive fortification and probiotics encapsulation, enhance their safety due to their antimicrobial and sensing capabilities and confer novel sensorial properties. In this food nanotechnology state-of-the-art communication, matrix materials with particular focus on food-grade components, existing and novel production techniques, and current and potential applications in the fields of food quality, safety and preservation, nutrient bioaccessibility and digestibility will be detailed. Additionally, a thorough analysis of potential strategies to assess the safety of these novel nanostructures is presented.
Assuntos
Indústria Alimentícia/tendências , Alimentos/normas , Nanoestruturas/classificação , Nanotecnologia/métodos , Biopolímeros , Indústria Alimentícia/normas , Conservação de Alimentos/métodos , Inocuidade dos Alimentos/métodos , Marketing/tendências , NanopartículasRESUMO
Rational design of small molecular gelators is an elusive and herculean task, despite the rapidly growing body of literature devoted to such gels over the past decade. The process of self-assembly, in molecular gels, is intricate and must balance parameters influencing solubility and those contrasting forces that govern epitaxial growth into axially symmetric elongated aggregates. Although the gelator-gelator interactions are of paramount importance in understanding gelation, the solvent-gelator specific (i.e., H-bonding) and nonspecific (dipole-dipole, dipole-induced and instantaneous dipole induced forces) intermolecular interactions are equally important. Solvent properties mediate the self-assembly of molecular gelators into their self-assembled fibrillar networks. Herein, solubility parameters of solvents, ranging from partition coefficients (log P), to Henry's law constants (HLC), to solvatochromic parameters (ET(30)), and Kamlet-Taft parameters (ß, α and π), and to Hansen solubility parameters (δp, δd, δh), are correlated with the gelation ability of numerous classes of molecular gelators. Advanced solvent clustering techniques have led to the development of a priori tools that can identify the solvents that will be gelled and not gelled by molecular gelators. These tools will greatly aid in the development of novel gelators without solely relying on serendipitous discoveries. These tools illustrate that the quest for the universal gelator should be left in the hands of Don Quixote and as researchers we must focus on identifying gelators capable of gelling classes of solvents as there is likely no one gelator capable of gelling all solvents.
Assuntos
Géis/química , Solventes/química , Modelos Químicos , Solubilidade , TermodinâmicaRESUMO
Molecular rotors may be utilized as non-invasive, non-disruptive and highly sensitive alternatives to conventional measures of bulk viscosity when the oil is entrained in a colloidal fat crystal network. Oil viscosity changes based on the molecular confinement of the oil, which is dependent on its molecular volume. Changes in micro-viscosity were not dependent on the solids content, but instead were strongly dependent on the box-counting fractal dimension in high-space filling colloidal fat crystal networks (i.e., D > 1.89). A bulk oil viscosity is often an overestimation of the actual viscosity of the entrained oil and may not be appropriate when predicting diffusion in multi-phase materials.
RESUMO
The influence of several nonionic surfactants (Tween-20, Tween-40, Tween-60, Span-20, Span-60, or Span-80) and anionic surfactants (sodium lauryl sulfate, sodium stearoyl lactylate, and sodium stearyl fumarate) showed drastic differences in the rank order of lipase activity/lipid bioaccessibility. The biophysical composition of the oil and water interface has a clear impact on the bioaccessibility of fatty acids (FA) by altering the interactions of lipase at the oil-water interface. It was found that the bioaccessibility was positively correlated with the hydrophilic/lipophilic balance (HLB) of the surfactant and inversely correlated to the surfactant aliphatic chain length. Furthermore, the induction time in the jejunum increased as the HLB value increased and decreased with increasing aliphatic chain length. The rate of lipolysis slowed in the jejunum with increasing HLB and with increasing aliphatic chain length.
Assuntos
Gorduras na Dieta/metabolismo , Digestão , Emulsificantes/química , Aditivos Alimentares/química , Absorção Intestinal , Modelos Biológicos , Animais , Caprilatos/química , Caprilatos/metabolismo , Emulsões , Tecnologia de Alimentos/métodos , Humanos , Nanotecnologia/métodos , Valor Nutritivo , Triglicerídeos/química , Triglicerídeos/metabolismoRESUMO
Water samples were collected during 3 years (2004-2007) at three sampling sites in the Rio de la Plata estuary. Thirteen biological, physical, and chemical parameters were determined on the water samples. The presence of microcystin-LR in the reservoir samples, and also in domestic water samples, was confirmed and quantified. Microcystin-LR concentration ranged between 0.02 and 8.6 µg.L(-1). Principal components analysis was used to identify the factors promoting cyanobacteria growth. The proliferation of cyanobacteria was accompanied by the presence of high total and fecal coliforms bacteria (>1500 MNP/100 mL), temperature ≥25°C, and total phosphorus content ≥1.24 mg·L(-1). The observed fluctuating patterns of Microcystis aeruginosa, total coliforms, and Microcystin-LR were also described by probabilistic models based on the log-normal and extreme value distributions. The sampling sites were compared in terms of the distribution parameters and the probability of observing high concentrations for Microcystis aeruginosa, total coliforms, and microcystin-LR concentration.
RESUMO
Theoretically, if an organism's resistance can be characterized by 3 survival parameters, they can be found by solving 3 simultaneous equations that relate the final survival ratio to the lethal agent's intensity. (For 2 resistance parameters, 2 equations will suffice.) In practice, the inevitable experimental scatter would distort the results of such a calculation or render the method unworkable. Averaging the results obtained with more than 3 final survival ratio triplet combinations, determined in four or more treatments, can remove this impediment. This can be confirmed by the ability of a kinetic inactivation model derived from the averaged parameters to predict survival patterns under conditions not employed in their determination, as demonstrated with published isothermal survival data of Clostridium botulinum spores, isobaric data of Escherichia coli under HPP, and Pseudomonas exposed to hydrogen peroxide. Both the method and the underlying assumption that the inactivation followed a Weibull-Log logistic (WeLL) kinetics were confirmed in this way, indicating that when an appropriate survival model is available, it is possible to predict the entire inactivation curves from several experimental final survival ratios alone. Where applicable, the method could simplify the experimental procedure and lower the cost of microbial resistance determinations. In principle, the methodology can be extended to deteriorative chemical reactions if they too can be characterized by 2 or 3 kinetic parameters.
Assuntos
Clostridium botulinum/crescimento & desenvolvimento , Escherichia coli/crescimento & desenvolvimento , Modelos Biológicos , Pseudomonas aeruginosa/crescimento & desenvolvimento , Salmonella/crescimento & desenvolvimento , Calicivirus Felino/crescimento & desenvolvimento , Clostridium botulinum/fisiologia , Contagem de Colônia Microbiana/métodos , Microbiologia de Alimentos , Cinética , Matemática , Valor Preditivo dos Testes , Esporos Bacterianos/crescimento & desenvolvimento , TemperaturaRESUMO
AIM: To develop a mathematical method to estimate non-isothermal microbial growth curves in foods from experiments performed under isothermal conditions and demonstrate the method's applicability with published growth data. METHODS AND RESULTS: Published isothermal growth curves of Pseudomonas spp. in refrigerated fish at 0-8 degrees C and Escherichia coli 1952 in a nutritional broth at 27.6-36 degrees C were fitted with two different three-parameter 'primary models' and the temperature dependence of their parameters was fitted by ad hoc empirical 'secondary models'. These were used to generate non-isothermal growth curves by solving, numerically, a differential equation derived on the premise that the momentary non-isothermal growth rate is the isothermal rate at the momentary temperature, at a time that corresponds to the momentary growth level of the population. The predicted non-isothermal growth curves were in agreement with the reported experimental ones and, as expected, the quality of the predictions did not depend on the 'primary model' chosen for the calculation. CONCLUSIONS: A common type of sigmoid growth curve can be adequately described by three-parameter 'primary models'. At least in the two systems examined, these could be used to predict growth patterns under a variety of continuous and discontinuous non-isothermal temperature profiles. SIGNIFICANCE AND IMPACT OF THE STUDY: The described mathematical method whenever validated experimentally will enable the simulation of the microbial quality of stored and transported foods under a large variety of existing or contemplated commercial temperature histories.
Assuntos
Escherichia coli/crescimento & desenvolvimento , Microbiologia de Alimentos , Pseudomonas/crescimento & desenvolvimento , Animais , Peixes/microbiologia , Modelos Logísticos , Matemática , Refrigeração , TemperaturaRESUMO
AIMS: To develop a method to calculate and record theoretical microbial survival curves during thermal processing of foods and pharmaceutical products simultaneously with the changing temperature. Moreover, to demonstrate that the method can be used to calculate nonisothermal survival curves, with widely available software such as Microsoft Excel. METHODS AND RESULTS: It has been assumed that the targeted organism's isothermal survival curves are not log linear and hence, the inactivation rate in nonisothermal processes is a function of the momentary temperature and the corresponding survival ratio. This could be expressed by a difference equation, which is an approximation to the continuous rate model. The concept was tested with the isothermal survival parameters of Clostridium botulinum and Bacillus sporothermodurans spores, and Salmonella enteritidis cells, using different kinds of survival models and under temperature profiles resembling those of commercial processes. As expected, there was an excellent agreement between the curves produced by solving the differential equation of the continuous model and by the incremental method, which has been posted on the web as freeware. CONCLUSIONS: It is possible to calculate nonisothermal survival curves, in real time, with an algorithm that can be written in the language of general purpose software, to follow the inactivation of one or more targeted organisms simultaneously and to simulate microbial survival patterns under existing or planned industrial thermal processes. SIGNIFICANCE AND IMPACT OF THE STUDY: Replacement of the traditional 'F0-value', which requires the log linearity of the organism's isothermal survival curves, by the more realistic theoretical survival ratio estimate as a measure of the thermal process efficacy.
Assuntos
Microbiologia de Alimentos , Conservação de Alimentos , Temperatura Alta , Esterilização , Testes de Sensibilidade Microbiana , Modelos BiológicosRESUMO
The isothermal survival curves of the heat resistant spores of Bacillus sporothermodurans IC4, in the range of 117-125 degrees C, were determined in chicken, mushroom and pea soups by the capillary method. They were all non-linear with a noticeable upper concavity and could be described by the equation log(10) [N(t)/N(0)]=-b(T)t(n) with a fixed power, n, of the order of 0.7-0.8. The temperature dependence of b(T) could be described by the equation b(T)=log(e)[1+exp[k(T-T(c))]], where T(c) is the temperature where intensive inactivation starts and k is the slope of b(T) at temperatures well above T(c). They were 121-123 degrees C and 0.2-0.4 degrees C(-1), respectively, depending on the soup. These parameters were used to estimate the survival curves of the spores in two non-isothermal heat treatments using the procedure originally proposed by Peleg and Penchina [Crit. Rev. Food Sci. Nutr. 40 (2000) 159]. The results were compared with experimental survival curves, determined by the direct injection method, in another laboratory. There was a general agreement, although not perfect, between the predicted and experimentally observed survival ratios. Also, the isothermal survival parameters, estimated directly from the non-isothermal inactivation data using the model, were in general agreement with those calculated from the isothermal data. This suggests that the heat inactivation patterns of B. sporothermodurans IC4 spores in soups can be at least roughly estimated using the same general survival model, which has until now only been experimentally validated for vegetative bacterial cells.
Assuntos
Bacillus/fisiologia , Microbiologia de Alimentos , Conservação de Alimentos/métodos , Temperatura Alta , Agaricales , Bacillus/crescimento & desenvolvimento , Cinética , Matemática , Modelos Biológicos , Pisum sativum/microbiologia , Produtos Avícolas/microbiologia , Valor Preditivo dos Testes , Esporos Bacterianos/crescimento & desenvolvimento , Fatores de TempoRESUMO
AIM: To develop a method to calculate microbial survival parameters in water treated with a dissipating disinfectant and predict the inactivation patterns under different agent concentrations and decay rate regimes. METHODS AND RESULTS: It has been assumed that the survival curves of the organism, under (hypothetical) constant agent concentration conditions, follow the power law model log [N(t)/N0] = -btn with a concentration independent exponent, n. The concentration dependence of the 'rate parameter', b, has been assumed to obey a log logistic relationship. Under changing disinfectant concentration, the survival curve is constructed so that its local slope, i.e. momentary logarithmic inactivation rate of the organism, is the slope of the momentary 'constant concentration' curve at the momentary agent concentration, at the time which corresponds to the momentary survival ratio. The resulting differential equation was used to retrieve the survival parameters by numerical minimization procedures. Once these are calculated, the equation is solved numerically to produce the survival curve for almost any conceivable agent concentration history. The predictive ability of the method is demonstrated by using the survival parameters, calculated from published data obtained under one concentration profile, to predict survival curves under very different decay patterns. CONCLUSIONS: It is possible to calculate microbial survival parameters from data obtained in treatments where the unstable or volatile disinfectant progressively dissipates and use them to predict the outcome of different treatments. SIGNIFICANCE AND IMPACT OF THE STUDY: The proposed mathematical method will enable the prediction of microbial inactivation patterns in water treated with unstable and/or volatile chemical agents.
Assuntos
Bactérias/efeitos dos fármacos , Desinfetantes/farmacologia , Modelos Biológicos , Microbiologia da Água , Purificação da Água/métodos , Simulação por Computador , Relação Dose-Resposta a Droga , Enterobacteriaceae/efeitos dos fármacos , Listeria monocytogenes/efeitos dos fármacos , Análise de Sobrevida , VolatilizaçãoRESUMO
Industrial microbial count records usually form an irregular fluctuating time series. If the series is truly random or weakly autocorrelated, the fluctuations can be considered as the outcome of the interplay of numerous factors that promote or inhibit growth. These factors usually balance each other, although not perfectly, hence, the random fluctuations. If conditions are unchanged, then at least in principle the probability that they will produce a coherent effect, i.e., an unusually high (or low) count of a given magnitude, can be calculated from the count distribution. This theory was tested with miscellaneous industrial records (e.g., standard plate count, coliforms, yeasts) of various food products, including a dairy-based snack, frozen foods, and raw milk, using the normal, log normal, Laplace, log Laplace, Weibull, extreme value, beta, and log beta distribution functions. Comparing predicted frequencies of counts exceeding selected levels with those actually observed in fresh data assessed their efficacy. No single distribution was found to be inherently or consistently superior. It is, therefore, suggested that, when the probability of an excessive count is estimated, several distribution functions be used simultaneously and a conservative value be used as the measure of the risk.
Assuntos
Contagem de Colônia Microbiana , Microbiologia de Alimentos , Modelos Estatísticos , Laticínios/microbiologia , Modelos TeóricosRESUMO
The conformation flexibility of the tetradecapeptide hormone bombesin and its synthetic antagonist (DPhe12, Leu14)-bombesin has been studied using nuclear magnetic resonance and circular dichroism techniques. The spectral features observed indicate that the ordered structure present in the C-terminal pentapeptide moiety of native BBS is lost in the (DPhe12, Leu14) analog.
Assuntos
Bombesina , Bombesina/análogos & derivados , Bombesina/metabolismo , Bombesina/farmacologia , Dicroísmo Circular , Espectroscopia de Ressonância Magnética , Conformação Proteica , Receptores da Bombesina , Receptores de Neurotransmissores/efeitos dos fármacos , Receptores de Neurotransmissores/metabolismo , Relação Estrutura-AtividadeRESUMO
The proton nmr characterization of bombesin (BBS) and of two peptide fragments corresponding to the (1-6) and (6-14) sequences has been carried out at 500 MHz in dimethyl sulfoxide (DMSO-d6) using two-dimensional (2D) homo and 1H-13C heterocorrelated techniques. All resonances in the nmr spectra have been assigned and several coupling constants have been measured. The backbone J alpha CH-NH coupling constants are quite similar and around 7.8-8.2 Hz, pointing to an unfolded structure in DMSO-d6. The possibility of secondary structures in highly viscous mixtures of DMSO-d6-water was investigated. The existence of sequential nuclear Overhauser enhancement (NOE) effects in the C-terminal nonapeptide section may indicate a preferential site for secondary structuring.