RESUMO
We describe the creation of a conductive microcavity based on the assembly of two pieces of carbon nanotube buckypaper for the entrapment of two enzymes, horseradish peroxidase (HRP) and glucose oxidase (GOx), as well as a redox mediator: 2,2'-azino-bis(3-ethylbenzothiazoline-6-sulfonic acid diammonium salt (ABTS). The hollow electrode, employing GOx, HRP, and the mediator, as an electrochemical enzyme cascade model, is utilized for glucose sensing at a potential of 50 mV vs. Ag/AgCl. This bienzyme electrode demonstrates the ability to oxidize glucose by GOx and subsequently convert H2O2 to water via the electrical wiring of HRP by ABTS. Different redox mediators (ABTS, potassium hexacyanoferrate (III), and hydroquinone) are tested for HRP wiring, with ABTS being the best candidate for the electroenzymatic reduction of H2O2. To demonstrate the possibility to optimize the enzyme cascade configuration, the enzyme ratio is studied with 1 mg HRP combined with variable amounts of GOx (1-4 mg) and 2 mg GOx combined with variable amounts of HRP (0.5-2 mg). The bienzyme electrode shows continuous operational stability for over a week and an excellent storage stability in phosphate buffer, with a decay of catalytic current by only 29% for 1 mM glucose after 100 days.
RESUMO
Efficient and robust electrochemiluminescence (ECL) emitters are crucial for enhancing the ECL immunosensor sensitivity. This study introduces a novel ECL emitter, CoBIM/Cys, featuring a hierarchical core-shell structure. The core of the structure is created through the swift coordination between the sulfhydryl and carboxyl groups of l-cysteine (l-Cys) and cobalt ions (Co2+), while the shell is constructed by sequentially coordinating benzimidazole (BIM) with Co2+. This design yields a greater specific surface area and a more intricate porous structure compared to CoBIM, markedly enhancing mass transfer and luminophore accessibility. Moreover, the l-Cys and Co2+ core introduces Co-S and Co-O catalytic sites, which improve the catalytic decomposition of H2O2, leading to an increased production of hydroperoxyl radicals (OOHâ¢). This mechanism substantially amplifies the ECL performance. Leveraging the competitive interaction between isoluminol and BIM for OOH⢠during ECL emission, we developed a ratiometric immunosensor for cardiac troponin I (cTnI) detection. This immunosensor demonstrates a remarkably broad detection range (1 pg mL-1 to 10 ng mL-1), a low detection limit (0.4 pg mL-1), and exceptional reproducibility and specificity.
Assuntos
Benzimidazóis , Cisteína , Técnicas Eletroquímicas , Medições Luminescentes , Troponina I , Benzimidazóis/química , Cisteína/análise , Cisteína/química , Medições Luminescentes/métodos , Técnicas Eletroquímicas/métodos , Imunoensaio/métodos , Troponina I/análise , Troponina I/sangue , Humanos , Limite de Detecção , Técnicas Biossensoriais/métodos , Cobalto/química , Peróxido de Hidrogênio/químicaRESUMO
Precise tuning the structure of catalytic center is of great importance for the construction of enhanced electrochemiluminescence (ECL) emitters and the development of ECL amplification strategies, which is a key factor in improving the sensitivity of biosensors. In this work, we report the enhanced ECL emitters based on the porphyrin-based paddlewheel framework (PPF) with axial coordinated imidazole-like ligands (PPF/X, X = 2-methylimidazole (MeIm), imidazole (Im), benzimidazole (BIM)). In this system, the electron-donating ability of the axial ligands is positively correlated to its coordination ability to the paddlewheel units and the catalytic ability of the axially coordinated paddlewheel units. In addition, the electrochemical and ECL behavior of PPF/X (X = MeIm, Im, BIM) with different axial coordinated ligands are explored.
RESUMO
Selective and sensitive detection of nitrite has important medical and biological implications. In the present work, to obtain an enhanced electrochemiluminescence (ECL) determination of nitrite, a novel nano-ECL emitter CoBIM/cetyltrimethylammonium bromide (CTAB) was prepared via a micelle-assisted, energy-saving, and ecofriendly method based on benzimidazole (BIM) and CTAB. Unlike conventional micelle assistance, the deprotonated BIM (BIM-) preferential placement was in the palisade layer of cationic CTAB-based micelles. Enriching the original CTAB micelle with BIM- disrupted its stability and resulted in the formation of considerably smaller BIM/CTAB-based micelles, providing a confined coordination environment for BIM- and Co2+. As a result, the growth of CoBIM/CTAB was also limited. Owing to the unusual nitration reaction between BIM and nitrite, the prepared CoBIM/CTAB was successfully applied as a novel ECL probe for the detection of nitrite with a wide linear range of 1-1500 µM and a low detection limit of 0.67 µM. This work also provides a promising ECL platform for ultrasensitive monitoring of nitrite and it was applied with sausages and pickled vegetables.
Assuntos
Compostos de Cetrimônio , Nitritos , Cetrimônio , Micelas , BenzimidazóisRESUMO
The emergence of novel pathogens, as well as their frequent variants, raises the significance of developing superior and versatile sensing materials and techniques. Herein, a post-modified zeolitic imidazolate framework (pm-ZIF) was synthesized by using ZIF-67 as a parent MOF, and zinc(II) meso-tetra (4-carboxyphenyl) porphine (ZnTCPP) as a successive exchange ligand. Due to the preservation of the tetrahedral Co-N4 units from the ZIF precursor and the introduced porphyrin luminophores, this hybrid material pm-ZIF/P(Zn) enables the linear electrochemiluminescence (ECL) signal conversion of the target DNA concentration. An efficient biosensor that can be used to quantitatively detect SARS-CoV-2 was therefore constructed. The linear range of the sensor was 10-12-10-8 M, with a limit of detection (LOD) reaching 158 pM. Compared with the traditional amplification-based methods, the duration time of our method is significantly shortened and the quantitation of the SARS-Cov-2 RdRp gene can be completed within twenty minutes at room temperature.
Assuntos
Técnicas Biossensoriais , COVID-19 , Humanos , COVID-19/diagnóstico , SARS-CoV-2/genética , Limite de Detecção , ZincoRESUMO
Implanted devices destined for contact with sterile body tissues, vasculature or fluids should be free of any microbial contamination that could lead to disease transmission. The disinfection and sterilisation of implantable biofuel cells is a challenging and largely overlooked subject due to the incompatibility of fragile biocatalytic components with classical treatments. Here we report the development of a convenient "soft" chemical treatment based on immersion of enzymatic bioelectrodes and biofuel cells in dilute aqueous chlorhexidine digluconate (CHx). We show that immersion treatment in a 0.5 % solution of CHx for 5 min is sufficient to remove 10-6 log colony forming units of Staphylococcus hominis after 26 h while shorter treatments are less effective. Treatments with 0.2 % CHx solutions were ineffective. Bioelectrocatalytic half-cell voltammetry revealed no loss in activity at the bioanode after the bactericidal treatment, while the cathode was less tolerant. A maximum power output loss of ca. 10 % for the glucose/O2 biofuel cell was observed following the 5 min CHx treatment, while the dialysis bag had a significant negative impact on the power output. Finally, we report a proof-of-concept in vivo operation for 4 days of a CHx-treated biofuel cell with a 3D printed holder and additional porous surgical tissue interface. Further assessments are necessary to rigorously validate sterilisation, biocompatibility and tissue response performance.
Assuntos
Fontes de Energia Bioelétrica , Desinfecção , Staphylococcus , Clorexidina/farmacologiaRESUMO
Constructing robust and efficient luminophores is of significant importance in the development of electrochemiluminescence (ECL) amplification strategies. Inspired by the resonance energy transfer in natural light-harvesting systems, we propose a novel ECL amplification system based on ECL resonance energy transfer (ECL-RET), which integrates two luminophores, benzimidazole (BIM) and zinc(II) tetrakis(4-carboxyphenyl)porphine (ZnTCPP), into one framework. Through disassembling and reconstruction processes, numerous BIM surround ZnTCPP in the constructed ZIF-9-ZnTCPP. Combined with the overlapped spectra between the emission of BIM and the absorption of ZnTCPP, the energy of multiple BIM (donor) can be concentrated to a single ZnTCPP (acceptor) to amplify the ECL emission of the acceptor. This work provides a convenient way to design an efficient ECL-RET system, which initiates a brand-new chapter in the development of ECL amplification strategies.
RESUMO
Exploring the depolymerization strategy of liposoluble luminophores in the aqueous phase is vital for the development of electrochemiluminescence (ECL). In this work, tetraoctylammonium bromide (TOAB) with four long hydrophobic chains and short hydrophilic ends is used as a template to limit the aggregation of benzimidazole (BIM). By adjusting the loading of BIM on the hydrophobic chains of TOAB, a two-dimensional lamellar BIM/TOAB is formed, the ECL intensity of which is 6.4 times higher than that of the aggregated BIM (H2O2 as the coreactant). In terms of ECL spectroscopies, cyclic voltammetry , ECL transients, and the adjustment of the scanning potential range, the ECL mechanism is thoroughly studied. This work provides a new way to depolymerize organic luminophores and reveals a possible pathway in the annihilation ECL mechanism.
RESUMO
Here we describe the design and the characterization of novel electrode materials consisting of multi-walled carbon nanotubes coated with glyconanoparticles (GNPs) functionalized with anthraquinone sulfonate. The resulting modified electrodes were characterized by scanning electron microscopy and cyclic voltammetry. Their electrochemical behavior reveals a stable pH-dependent redox signal characteristic of anthraquinone sulfonate. Immobilization of bilirubin oxidase on these three-dimensional electrodes leads to the electroenzymatic reduction of O2 to water with an onset potential of 0.5 V/SCE (saturated calomel electrode). A catalytic cathodic current of 174 µA (0.88 mA cm-2) at 0.1 V/SCE, demonstrates that glyconanoparticles modified by anthraquinone sulfonate were able to interact and orientate bilirubin oxidase by electrostatic interactions.
Assuntos
Nanotubos de Carbono , Nanotubos de Carbono/química , Oxirredução , EletrodosRESUMO
In the rapid development of artificial nanomaterials comparable to biological enzymes, we propose herein a novel concept for the construction of functional materials inspired from chemical evolution. To mimic the formation process of the catalytic system for the origin of life, dicyandiamide (DCD) was used as an elemental molecule for the de novo synthesis of an electrocatalyst. DCD was initially condensed with glucose (Glu) to form carbon dots (CDs) via a hydrothermal method. The self-assembly of the DCD-derived CDs was then modulated by introducing copper ions and a controlled pyrolysis process. Carbonization of the self-organized DCD-CDs/Cu at 300 °C in air produced the resultant catalyst (DCD-CDs/Cu-300) with the crystalline properties of a transitional state from an organic to inorganic matter, possessing a well-tuned chemical composition and the enhanced electrochemical signal of H2O2 reduction. Therefore, the DCD-CDs/Cu-300 modified electrode provides satisfactory analytical performance for trace H2O2 quantification with a wider linear range (1.0 × 10-7 to 1.4 × 10-3 M) and low detection limit (6.4 × 10-8 M, S/N = 3). This facile electrocatalyst construction strategy inspired from chemical evolution is expected to pave the way to form a more unified paradigm by integrating nanotechnology.
Assuntos
Carbono , Pontos Quânticos , Carbono/química , Pontos Quânticos/química , Peróxido de Hidrogênio , Evolução Química , Cobre/químicaRESUMO
Due to the complexity of the synthetic process of cobalt phosphides (CoP), ongoing efforts concentrate on simplifying the preparation process of CoP. In this work, amino tris(methylene phosphonic acid) (ATMP, L1) and melamine (MA, L2) are assembled into two-dimensional (2D) organic nanostructures by hydrogen bonding and ionic interactions via a supramolecular assembly, which greatly weakens the coordination ability of L1 with Co2+. As the introduced L2 is rich in carbon and nitrogen, it allows the cobalt-organophosphate complex to be placed under a strongly reducing atmosphere during the high-temperature calcination process to achieve an in situ phosphating purpose. The resulting catalyst (N-CoP/NC) exhibits the sought-after enhanced oxygen reduction reaction (ORR) and hydrogen evolution reaction (HER) performance. For the ORR in 0.1 M KOH, an enhanced onset potential (0.908 V vs. RHE) and diffusion limiting current (6.280 mA cm-2) can be obtained, which is comparable to those of 20% Pt/C (0.911 V vs. RHE, 5.380 mA cm-2). For the HER in 0.5 M H2SO4, an overpotential of 150 mV is required to drive a current of 10 mA cm-2. Moreover, Density Functional Theory (DFT) calculations reveal the catalytic pathway of N-CoP/NC.
RESUMO
High electrocatalytic activity with tunable luminescence is crucial for the development of electrochemiluminescence (ECL) luminophores. In this study, a porphyrin-based heterobimetallic 2D metal organic framework (MOF), [(ZnTCPP)Co2(MeIm)] (1), is successfully self-assembled from the zinc(II) tetrakis(4-carboxyphenyl)porphine (ZnTCPP) linker and cobalt(II) ions in the presence of 2-methylimidazole (MeIm) by a facile one-pot reaction in methanol at room temperature. On the basis of the experimental results and the theoretical calculations, the MOF 1 contains paddle-wheel [Co2(-CO2)4] secondary building units (SBUs) axially coordinated by a MeIm ligand, which is very beneficial to the electron transfer between the Co(II) ions and oxygen. Combining the photosensitizers ZnTCPP and the electroactive [Co2(-CO2)4] SBUs, the 2D MOF 1 possesses an excellent ECL performance, and can be used as a novel ECL probe for rapid nonamplified detection of the RdRp gene of SARS-CoV-2 with an extremely low limit of detection (≈30 aM).
RESUMO
A novel electrochemiluminescence (ECL) amplification strategy was established aiming to overcome the inherent shortcomings of the current oxygen (O2) coreactant ECL systems. Macrocyclic Schiff base Fe complexes were rationally designed as a novel integrated ECL emitter by iminium linkage between N-(4-aminobutyl)-N-ethylisoluminol (ABEI) and 1,10-phenanthroline-2,9-dicarbaldehyde (PDL) and postmetalation of the macrocyclic Schiff base. Covalently combining luminophore ABEI with a catalytic center endowed the novel ECL emitter with both remarkable redox electrocatalytic properties and significantly enhanced ECL efficiency. The high content of ferrous iron and the dominantly active low-spin Fe state greatly contributed to the inherent catalytic activity for O2 activation. The rational modification of luminophore optimized the spatial distribution and simultaneously shortened the species transport distance of coreactant radicals generated in situ from dissolved O2, resulting in significantly self-enhanced ECL efficiency. Neomycin, which posed a growing threat to aquatic biodiversity and environmental safety, as the model antibiotic was successfully detected with a detection limit of 0.21 pM (S/N = 3), clarifying a promising application prospect of this new luminophore-embedded ECL amplification strategy in biological analysis and environmental monitoring.
Assuntos
Técnicas Biossensoriais , Nanopartículas Metálicas , Luminol , Medições Luminescentes/métodos , Técnicas Biossensoriais/métodos , Limite de Detecção , Bases de Schiff , NeomicinaRESUMO
A new concept of hollow electrode based on the assembly of two buckypapers creating a microcavity which contains a biocatalyst is described. To illustrate this innovative concept, hollow bioelectrodes containing 0.16-4 mg bilirubin oxidase in a microcavity were fabricated and applied to electroenzymatic reduction of O2 in aqueous solution. For hemin-modified buckypaper, the bioelectrode shows a direct electron transfer between multi-walled carbon nanotubes and bilirubin oxidase with an onset potential of 0.77 V vs. RHE. The hollow bioelectrodes showed good storage stability in solution with an electroenzymatic activity of 30 and 11% of its initial activity after 3 and 6 months, respectively. The co-entrapment of bilirubin oxidase and 2,2-azino-bis(3-ethylbenzothiazoline-6-sulfonic acid) in the microcavity leads to a bioelectrode exhibiting mediated electron transfer. After 23 h of intermittent operation, 5.66 × 10-4 mol of O2 were electroreduced (turnover number of 19,245), the loss of catalytic current being only 54% after 7 days.
RESUMO
This review article focusses on new advances in the field of enzyme fuel cells (EFCs), especially, on flexible materials which can be used to make flexible EFCs for wearable devices, three-dimensional (3D) printed structures to prepare electrodes for EFCs and micro/nano electromechanical structures (MEMS/NEMS) to fabricate micro-EFCs. Particular attention is given to newly developed approaches to obtain efficient electrodes for harvesting energy via EFCs. This review article explains the various attributes of these recently developing technologies and their ability to mitigate the energy requirements of flexible/wearable bioelectronic devices. Besides discussing key milestones achieved, this perspective review article also emphasizes the main hurdles that are currently impeding the realization of flexible/wearable EFCs. We have also emphasized on the major hurdles related to the flexible materials required to fabricate wearable EFCs, suitable 3D printing techniques required, and MEMS and NEMS to fabricate micro-EFCs. In all the recently developed techniques, there are some common issues like stability, low power output, mechanical strength and flexibility. This review article also provides various routes to mitigate these issues. The main aim of this perspective article is to develop curiosity among the researchers of various fields to team up in order to address the huge challenges that restrict the real-world application of flexible/wearable EFCs. Such collaboration is important to harness the full potential of EFCs. It is requested to read this review article with supporting information to get the complete essence.
Assuntos
Técnicas Biossensoriais , Dispositivos Eletrônicos Vestíveis , Técnicas Biossensoriais/métodos , Eletrodos , Impressão TridimensionalRESUMO
The fluorescent organic 2,5,8-tris((adamantan-1-yl)-methoxy)-heptazine (HTZ-Ad) was solubilized in water by inclusion of adamantane groups into free ß-cyclodextrins or a cyclodextrin shell of glyconanoparticles. These glyconanoparticles with average diameters between 40 and 60 nm result from the self-assembly of polystyrene-block-ß-cyclodextrin copolymers. Under UV irradiation at 365 nm, the modified nanoparticles exhibit fluorescence emission in aqueous media as well as in their adsorbed state. This constitutes the first spectroscopic characterization of a trialkoxyheptazine in aqueous medium. The specific binding of the glyconanoparticles to a surface was achieved via host-guest interactions with an electrochemically generated poly(pyrrole-adamantane) film. An interdigitated microelectrode modified with poly(pyrrole-adamantane) film and glyconanoparticles was incubated in HTZ-Ad, resulting in a substrate with spatially controlled fluorescence. The same modified electrode was incubated with an aqueous suspension of glyconanoparticles previously functionalized by HTZ-Ad, resulting in a fluorescent 3D assembly.
Assuntos
Adamantano , Ciclodextrinas , Adamantano/química , Ciclodextrinas/química , Fluorescência , Pirróis , ÁguaRESUMO
Enzymatic biofuel cells (EBFCs) provide a new strategy to enable direct biomass-to-electricity conversion, posing considerable demand on sequential enzymes. However, artificial blend of multi-enzyme systems often suffer biocatalytic inefficiency due to the rambling mixture of catalytic units. In an attempt to construct a high-performance starch/O2 EBFC, herein we prepared a starch-oxidizing bioanode based on displaying a sequential enzyme system of glucoamylase (GA) and glucose dehydrogenase (GDH) on E.coli cell surfaces in a precise way using cohesin-dockerin interactions. The enzyme stoichiometry was optimized, with GA&GDH (3:1)-E.coli exhibiting the highest catalytic reaction rate. The bioanode employed polymerized methylene blue (polyMB) to collect electrons from the oxidation of NADH into NAD+, which jointly oxidized starch together with co-displayed GA and GDH. The bioanode was oxygen-insensitive, which can be combined with a laccase based biocathode, resulting in a membranless starch/O2 EBFC in a non-compartmentalized configuration. The optimal EBFC exhibited an open-circuit voltage (OCV) of 0.74 V, a maximum power density of 30.1 ± 2.8 µW cm-2, and good operational stability.
Assuntos
Fontes de Energia Bioelétrica , Técnicas Biossensoriais , Eletrodos , Enzimas Imobilizadas/metabolismo , Glucana 1,4-alfa-Glucosidase/metabolismo , Glucose/metabolismo , Glucose 1-Desidrogenase/metabolismo , Oxigênio/metabolismo , AmidoRESUMO
Glyconanoparticles (GNPs) made by self-assembly of carbohydrate-based polystyrene-block-ß-cyclodextrin copolymer are used as a building block for the design of nanostructured biomaterials of electrode. The firm immobilization of GNPs is carried out on electrochemically generated polymer, poly(pyrrole-adamantane), and copolymer, poly(pyrrole-adamantane)/poly(pyrrole-lactobionamide) via host-guest interactions between adamantane and ß-cyclodextrin. The ability of GNPs for the specific anchoring of biological macromolecules is investigated using glucose oxidase enzyme modified by adamantane groups as a protein model (GOx-Ad). The immobilization of GOx-Ad is carried out by incubation of an aqueous enzyme solution on a coating of GNPs adsorbed on a platinum electrode. The presence of immobilized GOx-Ad is evaluated in aqueous glucose solution by potentiostating the underlying platinum electrode at 0.7 V/SCE for the electro-oxidation of H2 O2 generated by the enzyme. The analytical performance of the bioelectrodes for the detection of glucose is compared to control electrodes prepared without GNPs or without electropolymerized films. The better permeability of copolymer compared to polymer and the possibility to elaborate two alternating layers of GNPs and GOx-Ad are clearly observed. The best amperometric response is recorded with a multilayered bioelectrode displaying a wide linear range linear range of the calibration curve: 68 µmol L-1 to 0.1 mol L-1 .
Assuntos
Técnicas Biossensoriais , Nanopartículas , beta-Ciclodextrinas , Eletrodos , Enzimas Imobilizadas/química , Glucose/química , Glucose Oxidase/química , Nanopartículas/química , Pirróis/química , beta-Ciclodextrinas/químicaRESUMO
In view of the shortcomings of the current coreactant electrochemiluminescence (ECL) and inspired by natural oxygen (O2) reduction metalloenzymes, a novel ECL amplification strategy was established. A pyrolytic iron- and nitrogen-doped (Fe-N-C) nanosheet rich in singly ionized oxygen vacancy (VOâ¢) defects was rationally designed by destroying the highly saturated coordination with a preorganized ligand 1,10-phenanthroline-2,9-dicarboxylic acid (PDA). Extraordinary catalytic activity for O2 activation was obtained via screening a special pyrolysis temperature using spectroscopic and electrochemical methods. The high-spin ferric centers of highly dispersed FeC nanoclusters and abundant carbon and oxygen vacancy defects fully contributed to the inherent catalytic activity. ECL amplification was achieved by integrating the material with luminol to generate redox-active radicals in situ from dissolved O2 and simultaneously shorten the transferring distance of radicals. Tetracycline (TC), which posed a growing threat to aquatic biodiversity and environmental safety, as a model antibiotic was successfully detected with a detection limit of 3.88 nM (S/N = 3), clarifying a promising application prospect of this new effective ECL amplification strategy in biological analysis and environmental monitoring.
Assuntos
Técnicas Biossensoriais , Antibacterianos , Técnicas Biossensoriais/métodos , Técnicas Eletroquímicas/métodos , Ferro , Ligantes , Limite de Detecção , Medições Luminescentes/métodos , Luminol/química , Fenantrolinas , TetraciclinaRESUMO
Reasonable control of the redox states within the catalytic units together with the interconnection degrees of the substrate is of great significance in the modulation of a well-performing transducer. Herein, a novel carbon black (CB)-modified copper metal-organic framework nanomaterial (CB@Cu-MOF) prepared at room temperature was utilized as a precursor to synthesize mixed-valent copper-oxide composite catalysts (NC/CuxO-T). By tuning the carbonization process of the precursor at different temperatures (T = 100 °C, 200 °C, 300 °C and 400 °C), the different ratio configurations of the redox-alternated CuxO portions were successfully controlled with the simultaneous effective tailoring of the defect abundance in the N-doped carbon substrate. As a result, an optimized NC/CuxO-300 electrochemical H2O2 sensor was able to present a low detection limit (0.26 µM) and decent linear ranges (0.02-1.79 mM and 2.29-9.29 mM). Our strategy using easily available initial materials with mild preparation conditions is expected to promote the practical application of the star materials in laboratories.